CE-Link Ce Link WPC10 Wireless Charger Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Wireless Charger
WPC10-1CCOA
User Manual
CONETNES
1.0 INTRODUCTION ---------------------------------------------------- 1
2.0 FEATURES ---------------------------------------------------------- 1
3.0 SPECIFICATIONS -------------------------------------------------- 1
4.0 PACKAGE CONTENTS ---------------------------------------------- 2
5.0 OPERATION --------------------------------------------------------- 2
6.0 CONNECTION DIAGRAM ------------------------------------------- 3
Wireless Charger
1
Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This product is a high-performance wireless charger. This product is
suitable for mobile phones, MP3, MP4, digital productions, and other
productions based on wireless charging 5W or 10W. Connect the
wireless to a power charger, and then you can charge your device
supported wireless charging (MP3, mobile phones, etc) by put it on
the charger directly. It is helpful in long time journey and convenient
for business!
2.0 FEATURES
Transmitting terminal input:
5V/2A,9V/1.67A ,12V/1.25A(compatible with PD/QC)
Transmitting terminal output: 5W/7.5W/10W
Intelligent green indicator to show working condition
Compliant with QI, CE, FCC standards
It is light, smart and convenient to use
3.0 SPECIFICATIONS
Input
Type-C 5V/2A, 9V/1.67A, 12V/1.25A
(compatible with PD/QC)
Output
10W Max
Switch Frequency
112-205kHz
Operating Temperature Range
0~30°C
Storage Temperature Range
-20 ~ 70°C
Operation Humidity
10% ~ 80% RH
Storage Humidity
5% ~ 95% RH
Size
W92.5mm*H105mm*T96.5mm
Weight
95g±3g
Wireless Charger
2
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
Main unit×1
User Manual×1
5.0 OPERATION
Operation Procedures
1. Connect the wireless charger to the power adapter, the red light
will be on during standby.
2. Place your device (which supports wireless charging) on the
charger and the green light will keep breathing.
3. When finished charging, the light will Keep breathing.
4. Please take out the device after it is fully charged.
Note: red light for flashing when malfunction occurs.
Operation Notes
1. For optimum performance, please use the wireless charger
according to this user manual.
2. Please connect the wireless charger to a power adapter which
output should be 5V/2A, 9V/1.67A,12V/1.25A.
3. Please unplug the wireless charger after using.
4. Do not use the wireless charger with an electronic product which is
not in conformity with the specifications, so as to avoid any
problem caused by specification mismatching.
5. It’s normal that wireless charger will be a little overheated in the
use process.
6. When the wireless charger stops working under some accidents ,
you need to check whether the device is compatible with this
charger.
7. Do not let the wireless charger close to fire, such as stove, candles
and etc.
8. Do not let the wireless charger soak into liquid, such as swimming
pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the
store or distributor in your area.
11. Do not place metal objects on the back of the phone while it is
charging wirelessly.Please check that there is no metal foreign
body on the back of your mobile phone when using this product.
Wireless Charger
3
6.0 CONNECTION DIAGRAM
RF exposure statement
This equipment complies with the FCC RF radiation exposure
limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
This equipment meets the exemption from the Nerve Stimulation
Exposure Limits in section 6.5 of SPR-002. It should be installed
and operated with a minimum distance of 20cm between the
radiator and any part of your body.
Cet équipement pond à l'exemption des limites d'exposition à la
stimulation nerveuse de la section 6.5 du SPR-002. Il doit être
installé et utilisé à une distance minimale de 20 cm entre le
radiateur et toute partie de votre corps.
Wireless Charger
4
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply
with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
veloppement économique Canada applicables aux appareils
radio exempts de licence. Lexploitation est autorisée aux deux
conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
P/N
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

CE-Link Ce Link WPC10 Wireless Charger Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues