PURe geaR 09803PG Manuel utilisateur

Taper
Manuel utilisateur
2 3
Specs
Model: 09803PG, 09925PG
Input: 5VDC/3A;9VDC/2.22A;12VDC/1.67A
Output:
5W/7.5W/10W/15W
(Fast
Charge)
*
Charging
time
may
vary
based
on
device
**
NOTE:
A
20W
or
higher
USB-C
Power
Adapter
is
recommended
(sold
separately)
to
enable
fast
wireless
charging.
Caution
DO
NOT
place
any
credit
cards
or
other
types
of
magnetic
material
near
the
charging
pad.
Do
not
attempt
to
disassemble
the
wireless
charging
pad
as
it
may
short
circuit
or
damage
the
product.
Keep
at
least
8”
(20cm)
distance
between
implantable
medical
devices
such
as
pacemakers,
cochlear
implants,
etc.
Keep
this
product
in
a
dry
and
ventilated
space.
Do
not
place
in
direct
heat
or
use
in
high
humidity
environments.
Do
not
use
organic
solvents
to
clean
surface.
ENGLISH
Using your Fast Magnetic Wireless Charger
1.Plug the USB-C connector into the wall charger (not included).
2.Plug in the wall charger (20W PD charger recommended).
3.Place the PureGear Magnetic Wireless Charger onto the back
of your MagSafe® device until it automatically aligns and snaps
into place.
NOTE: This Magnetic Wireless Charger also supports non-magnetic,
Qi-enabled devices.
One Year Limited Warranty
This wireless product is covered by a limited warranty to the
original purchaser only in that this product is free from defects
in workmanship and materials for ONE-YEAR from the date of
purchase (damages through normal wear and tear, alteration,
misuse, neglect, accident, service by anyone other than the
authorized service center, or act of God not included). During the
warranty period and with proper proof of purchase, this wireless
product will be replaced. This limited warranty is in lieu of all other
warranties, express or implied, including, but not limited to, implied
warranty of merchantability or fitness for a particular use. For all
warranty claims, the product must be returned in accordance with
PureGear’s return policy.
All trademarks and trade names are used for reference purposes
only and are the property of their respective owners.
4 5
ENGLISH
6 7
FCC
Interference
Statement
This
device
complies
with
Part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
this
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation.
CAUTION:
Changes
or
modifications
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user’s
authority
to
operate
this
equipment.
NOTE:
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device,
pursuant
to
Part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
FCC
Interference
Statement
(cont.)
This
equipment
generates,
uses
and
can
radiate
radio
frequency
energy;
if
not
installed
and
used
in
accordance
with
the
instructions,
maybe
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures:
Reorient
or
relocate
the
receiving
antenna.
Increase
the
separation
between
the
equipment
and
receiver.
Connect
the
equipment
into
and
outlet
on
a
circuit
different
form
that
to
which
the
receiver
is
connected.
Consult
the
dealer
or
an
experienced
radio/TV
technician
for
help.
FCC
RF
exposure
statement:
The equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance between 20cm the
radiator your body.
ENGLISH
IC
Statement
This
device
contains
licence-exempt
transmitter(s)/receiver(s)
thatcomply
with
Innovation,
Science
and
Economic
Development
Canada’s
licence-exempt
RSS(s).
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
may
not
cause
interference;
and
(2)
This
device
must
accept
any
interference,
including
interference
that
may
cause
undesired
operation
of
the
device.
This
equipment
complies
with
FCC
and
IC
radiation
exposure
limits
set
forth
for
an
uncontrolled
environment.
This
equipment
should
be
installed
and
operated
with
minimum
distance
10cm
between
the
radiator
&
your
body.
Cet appareil contient des émetteurs / récepteurs exemptés
de licence conformes aux RSS (RSS) d'Innovation, Sciences
et Développement économique Canada. Le fonctionnement
est soumis aux deux conditions suivantes:
Cet appareil ne doit pas causer d'interférences.
Cet appareil doit accepter toutes les interférences, y compris
celles susceptibles de provoquer un fonctionnement
indésirable de l'appareil.
Déclaration d'exposition RF:
Lquipement est conforme à la limite d'exposition aux
radiations de la IC établie pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec une
distance minimale de 10 cm entre le radiateur et votre corps.
pure-gear.com
© 2021 F00182PG
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

PURe geaR 09803PG Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues