iOttie 606CHIO160 Manuel utilisateur

Taper
Manuel utilisateur
RapidVoltTM
20W Wall Charger
USB-C Power Adapter
User Manual
0504 EN
USB-C Port
20W
Prongs
Item Specification
Input AC 100V–240V, 50/60Hz 0.6A
Output DC 5V/3A, 9V/2.22A, 12V/1.67A
Length 1.66"
Width 1.18"
Height 2.34"
Weight 1.46 oz
Simply plug the
RapidVolt into any
wall outlet.
Connect your device to the RapidVolt Wall
Charger using a USB-C cable (not included).
Fast charging will begin automatically.
01 Product Information
At a Glance
Product Specifications
02 Using the RapidVolt
Car Charger
Connecting to
Power
Charging Your Device
Note
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Operation Warnings RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment shall be
installed and operated with minimum distance 20cm between
the radiator & body.
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation, Sciences
et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes:
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for
an uncontrolled environment. This equipment shall be installed
and operated with minimum distance 20cm between the
radiator & body.
Cet équipement est conforme aux limites d'exposition IC
définies pour un environnement non contrôlé. Cet équipement
doit être installé et utilisé avec une distance minimale de 20cm
entre le radiateur et la carrosserie.
The RapidVolt Wall Charger is backed by
a 2 year warranty.
This manual contains important safety and operating
instructions for the RapidVolt 20W Wall Charger (CHCRIO160).
Please read all instructions and safety information before using
this product. If damage occurs as a result of failure to follow the
instructions, the warranty will be voided.
• Do not expose to rain, moisture, or snow.
• To reduce the risk of electric shock, unplug this wall charger
before attempting any maintenance or cleaning.
• Avoid extended exposure to direct sunlight, which may
damage the device.
• Exposing this product to open flames may cause it to explode.
• Use a dry, soft lint-free cloth to clean. Do not use any corrosive
cleaner or oil to clean.
This product complies with the radio interference requirements
of the European Community.
This product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
The product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural
resources, human health and the environment. For more
information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop you bought
this product.
Important Safety Information
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

iOttie 606CHIO160 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues