CE-Link CE-LINK USB-AX2 Charging Adapter Manuel utilisateur

CE-LINK USB-AX2 Charging Adapter
Marque
CE-Link
Modèle
CE-LINK USB-AX2 Charging Adapter
Taper
Manuel utilisateur

Ce manuel convient également à

Type-C to
USB-AX2/SD/TF/3.5mm
Audio/Type-C PD Charging
Adapter with Wireless
Charging
User Manual
For wireless charging
Anti-slip silicon pad
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
Contents
1.0 INTRODUCTION .............................................. 1
2.0 FEATURES ...................................................... 1
3.0 SPECIFICATIONS ............................................ 3
4.0 NOTICE ......................................................... 4
5.0 PACKAGE CONTENTS ....................................... 4
6.0 CONNECTION DIAGRAM ................................... 5
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
1
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This is a Type-C 6-in-1 Adapter with wireless charging function. It
integrates the function of a normal adapter and a wireless charging
adapter into one, besides, its captive cable can be wrapped on the
bottom, bringing customers great user experience and convenience.
With wireless charging function, users can charge their devices with
max 10W power by putting devices on the surface which is designed
with anti-slip silicon pad. What’s more, this product provides data and
PD charging ports to extend a single Type-C port of the host to be
multiple ports.
It can work on all Type-C and ThunderboltTM3 host that supports DP
Alt mode. When working on Thunderbolt TM 3 host, this product
transmits DP signal.
2.0 FEATURES
Wireless Charging:
Support wireless charging with max 10W power，auto-adjust to
2.5W/5W/7.5W based on requirement the connected device and
the capacity of power source
When PD Adapter is connected, PC is not connected
Support max 10W wireless charging when PD Adapter power is
over or equal to 27W, support max 5W wireless charging when PD
Adapter power is less than 27W
When PC is connected, PD Adapter is not connected
Support max 5W wireless charging when host charging capacity is
over or equal to 15W, support max 2.5W wireless charging when
host charging capacity is less than 15W
When both PC and PD Adapter are connected
Support max 10W wireless charging when PD Adapter power is
over or equal to 30W, support max 5W wireless charging when PD
Adapter power is less than 30W
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
2
Support over-temperature protection, when the surface
temperature surpasses threshold temperature, the wireless
charging function will stop to work and will not return to work
automatically until the temperature reduces within the safe
temperature, so as to keep the charging device from being
damaged due to high temperature
Compact design
Type-C captive cable can be wrapped on the bottom of this design,
offering great convenience for users
Support Fast Role Swap of PD 3.0, the connected device will not
get disconnected while plugging in and out PD Adapter
Supports max 5Gbps data transmission for USB-A port, one USB-A
supports max 1.5A downstream charging，2 USB-A share max
1.5A downstream charging
Support over-circuit protection, over-current protection
Type-C female supports max 100W PD Charging
Type-C female supports Dynamic Current Detection and
Power Distribution which enables to distribute power according
to actual consumption of the connected device , taking full
advantage of power supply and dynamically charging the host with
more power.
Note: 3W is reserved for the product when no external device
connected, more power will be dynamically provided based on the
required power of the connected devices.
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
3
3.0 SPECIFICATIONS
Connector
Parameter
Upstream
Type-C Male x1
Connect to host
Downstream
SD/TF
Support Secure Digital v3.0 UHS-I (Ultra
High Speed)：SDR12
(12.5Mbyte/s)/SDR25(25Mbyte/s)/SDR50(5
0Mbyte/s)/DDR50(50Mbyte/s)/SDR104(104
Mbyte/s)
Allow 2 card slots to work simultaneously
USB-AX2
Max 5Gbps data transmission
One USB-A supports max 7.5W (5V/1.5A)
Another USB-A supports max
4.5W(5V/900mA)
2 ports share max 7.5W(5V/1.5A)
3.5mm audiox1
Support analog audio output
SNR>86dB
THD+N<0.02%@20mW
CrossTalk>78dB
Type-C Femalex1
Support max 100W PD Charging
Support fast role swap of PD3.0
Wireless Charging
Max 10W, auto-adjust to 7.5W/5W/2.5W based
on the requirement of the connected device and
the capacity of power source
Mechanical
Size (L-W-H)
90*90*23.5mm
Weight (Net)
142g
Warranty
Limited Warranty
1 Year
Environmental
Operating Temperature
0℃ to +45℃
Operating Humidity
10% to 90 % RH (no condensation)
Storage Temperature
-10℃ to +70℃
Storage Humidity
10% to 90 % RH (no condensation)
Power Supply
USB-C PD Charging Port
100W(20V/5A)
Regulatory Approvals
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
4
Certifications
FCC,CE
Accessory Adapter
User Manual
English Version
4.0 PACKAGE CONTENTS
To achieve the most effective wireless charging effect, please
keep the following tips:
1) It is suggested to keep the surrounding temperature to be
around 25℃ and keep ventilation;
2) Make sure that wireless charging coil of the mobile phone is
put rightly on the center of the wireless charging area;
3) It is suggested not to wireless charge mobile phone when this
product is full loaded or heavily loaded. (Note: when in full lo
aded or heavily loaded mode, this product will be in a higher t
emperature than in no loaded or light loaded state, then those
mobile phones (iPhone 8Plus/Samsung Note 9 etc)which are se
nsitive to high-temperature sensitive may automatically reduce
charging power, resulting in a slower charging speed)
5.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
Main unit x1
User Manual x1
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
5
6.0 CONNECTION DIAGRAM
7.1 RF EXPOSURE STATEMENT
This equipment complies with the FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the
radiator and any part of your body.
This equipment meets the exemption from the Nerve Stimulation
Exposure Limits in section 6.5 of SPR-002. It should be installed and
operated with a minimum distance of 20cm between the radiator and
any part of your body.
Cet équipement répond à l'exemption des limites d'exposition à la
stimulation nerveuse de la section 6.5 du SPR-002. Il doit être installé
et utilisé à une distance minimale de 20 cm entre le radiateur et toute
partie de votre corps.
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
6
7.2 FCC WARNING
This device complies with Part 15 and Part 18 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
7.3 IC WARNING
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Type-C to USB-AX2/SD/TF/3.5mm Audio / PD Charging Adapter with Wireless Charging
7
Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

CE-Link CE-LINK USB-AX2 Charging Adapter Manuel utilisateur

CE-LINK USB-AX2 Charging Adapter
Marque
CE-Link
Modèle
CE-LINK USB-AX2 Charging Adapter
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents