Omcan DW-CN-0902 Manuel utilisateur

Marque: Omcan

Modèle: DW-CN-0902

Taper: Manuel utilisateur

Display Warmer

Models DW-CN-0902, 0686, 1194

Items 21570, 21749, 21571

Instruction Manual

Revised - 12/03/2021

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 6

-------------------------------------------------------------------------- 6

--------------------------------------------------------------------------------------- 6 - 7

--------------------------------------------------------------------------------------------- 8

----------------------------------------------------------------------------------------- 8

------------------------------------------------------------------------------------- 9

---------------------------------------------------------------------------- 10 - 12

---------------------------------------------------------------------------- 13

------------------------------------------------------------------------------------------------- 14

---------------------------------------------------------------------------- 15

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model DW-CN-0902 / Model DW-CN-0686 / Model DW-CN-1194

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

Safety and Warranty

General Information

WARNING:

1. If the supply cord is damaged it, must be replaced by Omcan, its service agent or similarly qualied

persons.

2. This appliance shall not be cleaned with a water jet.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have supervision or instruction

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

concerning use of the appliance by a person responsible for their safety.

4. Children should be supervised to ensure that they do not play with the appliance.

5. Before using this machine, make sure the machine has an operational electric ground.

To ensure safe operation, read the following statements and understanding their

meaning. Please read carefully.

WARNING: BURN HAZARD

Do not touch hot food, liquid or heating surfaces while equipment is heating or operating. Hot surfaces and

food can cause injury to the operator (burning of skin). Allow the hot surfaces to cool before handling. Do not

drop or spill water onto the cooking surface.

WARNING: ELECTRICAL SHOCK HAZARD

Do not let water or any other liquid enter the machine. Liquid entering the machine can cause electrical shock.

Do not spray water or cleaning products on the machine. Do not use the machine if the power cord is damaged

or changed in any way.

To reduce risk of injury or damage to the machine:

• Use only grounded electrical outlets corresponding with the electrical requirements of the machine.

• The equipment must be placed on a at, level surface.

• Do not use an extension cord with the machine.

• Turn off and unplug the machine before any maintenance or inspection.

• Keep the machine and its power cord from ammable or corrosive products.

• Do not leave the machine unsupervised when operating.

• Do not operate the machine if it is damaged in any way.

Omcan display warmers are engineered and designed to maintain previously cooked foods at serving

temperatures. Improper use of this machine’s maximum temperature for extended periods of time, in an

attempt to thoroughly cook food products, is prohibited. Such operation will void the manufacturer’s warranty

and may result in under cooked and therefore unsafe food.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Installation

Safety and Warranty

NOTE: THIS UNIT IS DESIGNED TO HOLD WARM FOOD. IT IS NOT DESIGNED TO

COOK FOOD. ALL FOOD MUST BE FULLY COOKED AND HEATED PRIOR TO PLACING

IT INTO THE WARMER.

UNPACKING AND SETUP

Dispose of all packaging in accordance with local laws.

1. Remove all packing material and protective packaging materials.

2. Remove the bolts that secure the equipment to the pallet.

3. Clean any glue residue.

4. Install the light bulbs and their covers according the procedures earlier listed.

5. Install the shelving according to the procedures earlier listed.

6. Install the doors according to the procedures earlier listed.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model DW-CN-0686 DW-CN-0902 DW-CN-1194

Power 1340 W 1500 W

Temperature 30°-85°C / 86°-185°F

Electrical 110V / 60 / 1

Weight 81.4 lbs. / 36.9 kgs. 110 lbs. / 49.9 kgs. 167 lbs. / 75.7 kgs.

Dimensions (WDH) 27” x 17” x 25”

686 x 432 x 635mm

35.5” x 18.75” x 23.5”

902 x 476 x 597mm

47” x 19” x 32”

1194 x 483 x 813mm

Item Number 21749 21570 21571

Installation

7. NOTE: Shelves can be sloping forward for improved presentation.

8. Plug the machine into a properly grounded outlet matching the nameplate rating.

LIGHT BULB AND COVER INSTALLATION

Before installing the shelving of the machine, install the lights and its covers.

1. Slide the light bulb into the lower receptacle slot.

2. Slide the light bulb into the upper receptacle slot.

3. Turn the light bulb until it locks into place correctly tting into the receptacles.

4. Put the light cover into the bracket to x it in place. Start at the bottom, press the edge of the cover on the

inside of the bracket from the bottom to the top.

5. Repeat steps 1 to 4 for the other side.

INSTALLING THE GLASS SIDES

1. Unscrew the glass holder brackets near the bottom of the sides of the unit until they are all loose.

2. Align one of the glass sides with the unit, putting the top of the glass into the channel located on the top of

the unit.

3. Turn the bottom brackets upward and tighten, ensure that the bracket rmly holds the glass.

4. Follow steps 2 and 3 for the other side.

CHANGING THE LIGHT BULB OR COVER

1. Remove the front doors and shelves.

2. Reverse the steps in the Light Bulb and Cover Installation process.

3. Install a new cover or bulb by following the steps listed in the Light Bulb and Cover Installation process.

SHELF BRACKETS, SUPPORT AND DOOR INSTALLATION

1. First install the light bulb and its cover. Follow the procedures mentioned above for this process.

2. Fix the shelf supports into the base and top of the unit.

3. Install the shelf brackets into the supports so that the locking tabs are pointing to the back of the unit.

4. Fix the taller doors to the front with the handles facing outwards.

5. Fix the shorter doors to the back so the handles face outwards.

NOTES

1. Unit must be placed on a solid and level surface.

2. Before using this machine, please make sure the machine is safely grounded.

3. The voltage supply must be correspond with the rated voltage of the warmer.

4. Each time before using the machine, add 0.6 liters (0.16 gallons) of water into the water tray of this

machine.

5. After connecting the machine to the power supply, the power indicator light will be on. Turn the heating

switch to select the desired temperature. Air convection will keep the desired temperature throughout the

machine.

6. If light is needed, use the light bulb type equipped with the machine.

7. After using, always clean the machine. For safety reasons, cut off power supply and unplug before any

cleaning.

8. If any abnormal objects, substances or noises are observed, turn the machine off and contact Omcan at

1-800-465-0234.

Maintenance

Operation

CLEANING

To increase service life, clean equipment daily.

NOTE: Do not use detergents which are acidic, corrosive or contain chlorine.

NOTE: Do not immerse the cord, plug or machine in water or any other liquid. Do not

use pressurized water jets to clean the machine.

1. Turn the machine off and unplug it from the electrical socket. Let the machine cool completely before

cleaning.

2. Use a damp cloth or sponge, use detergent and water to clean the equipment.

3. A high quality, non-toxic glass cleaner can be used to clean the glass on the machine.

4. Completely dry the machine before using.

Before using the machine, a complete cleaning of the machine must be performed. Before placing food in the

warmer, let the machine operate at desired temperature for 30 - 45 minutes. Food must already be cooked

and heated before placing in the machine. This machine is not designed to cook food. Check the temperature

inside the machine regularly. If the machine is placed in an area with high humidity, open the rear doors to stop

condensation.

NOTE: Monitor food temperature closely to ensure food safety.

1. Adjust the thermostat control to the designed temperature.

2. Turn the light switch position to ON if the light is desired.

3. It may be necessary to add water to the pan to increase the humidity inside the machine. Monitor the water

level closely.

4. When nished with the machine, turn the thermostat control to the lowest setting and switch the light to the

OFF position. Then unplug the unit. If removing hot items from the unit, use protective gloves.

5. Let the water pan completely cool before disposing the water.

6. Proceed to clean the machine by the instructions listed (see below).

Troubleshooting

Problem Cause Solution

Condensation on the glass. High moisture and high levels of

heat.

Open the rear doors slightly.

No power. Faulty outlet. Have outlet replaced by a qualied

electrician.

Circuit breaker tripped. Reset the circuit breaker.

The unit is not heating. Faulty heating element. Have unit serviced by qualied

technician.

Indicator light does not turn on

when temperature control is turned

up.

Unit is not plugged in. Plug in power cord.

Indicator light malfunction. Replace indicator light.

Light(s) do not work. Defective or faulty starter(s). Replace starter(s).

Defective or faulty ballast(s). Replace ballast(s).

Defective or faulty light(s). Replace light(s).

Loose connection or defective

socket.

Tighten connection or replace

socket.

Model DW-CN-0902 21570

Model DW-CN-0686 21749

Model DW-CN-1194 21571

Parts Breakdown

Model DW-CN-0686 21749

Item No. Description Position Item No. Description Position Item No. Description Position

66044 Clip with Screw for 21749 1 24770 Front / Back Door Handle for 21749 12, 25 24795 White Decorating Plate for 21749 23

24746 Plug and Power Cord for 21749 2 24785 Front Glass 440x300mm for 21749 13 24796 Back Glass 436x300mm for 21749 24

41081 Thermostat with Knob for 21749 3 24786 315 Shelf for 21749 14 24798 Cover of Heater for 21749 26

24749 Indicator Light for 21749 4 24787 350 Shelf for 21749 15 24772 GN Pan for 21749 27

24750 Switch for 21749 5 24788 360 Shelf for 21749 16 26019 Fluorescent Tube only 8 Watt for 21749 28

24751 Temperature Display for 21749 6 24789 Vertical Support for 21749 17 21399 Right or Left Side Glass for 21749 29, 30

24779 Bracket of Heater for 21749 7 66063 Left Bracket for Shelf for 21749 18 66059 40W Light Holder for 21749 32

24780 Heater for 21749 8 24764 40W Light for 21749 19 66064 Right Bracket for Shelf for 21749 33

24781 Base for 21749 9 24792 Middle-Level Assembly for 21749 20 66065 Light Tube Holder for 21749 34

24755 Plastic Foot for 21749 10 24766 110V Ballast for 21749 21 28737 Right Fluorescent Tube Cover for 21749 35

24783 Door Guide for 21749 11 24794 Top Cover for 21749 22 28738 Left Fluorescent Tube Cover for 21749 36

Model DW-CN-0902 21570

Item No. Description Position Item No. Description Position Item No. Description Position

66044 Clip with Screw for 21570 1 24770 Front / Back Door Handle for 21570 12, 25 24768 White Decorating Plate for 21570 23

24746 Plug and Power Cord for 21570 2 24758 Front Glass 400x417mm for 21570 13 24769 Back Glass 394x417mm for 21570 24

41081 Thermostat with Knob for 21570 3 24759 315 Shelf for 21570 14 24771 Cover of Heater for 21570 26

24749 Indicator Light for 21570 4 24760 350 Shelf for 21570 15 24772 GN Pan for 21570 27

24750 Switch for 21570 5 24761 360 Shelf for 21570 16 26019 Fluorescent Tube only 8 Watt for 21570 28

24751 Temperature Display for 21570 6 24762 Vertical Support for 21570 17 28728 Right or Left Side Glass for 21570 29, 30

24752 Bracket of Heater for 21570 7 28735 Left Bracket for Shelves for 21570 18 66059 40W Light Holder for 21570 32

24753 Heater / Heating Element for 21570 8 24764 40W Light for 21570 19 24763 Right Bracket for Shelves for 21570 33

24754 Base for 21570 9 24765 Middle-Level Assembly for 21570 20 28736 Fluorescent Tube Holder for 21570 34

24755 Plastic Foot for 21570 10 24766 110V Ballast for 21570 21 28737 Right Fluorescent Tube Cover for 21570 35

24756 Door Guide for 21570 11 24767 Top Cover for 21570 22 28738 Left Fluorescent Tube Cover for 21570 36

Parts Breakdown

Model DW-CN-1194 21571

Item No. Description Position Item No. Description Position Item No. Description Position

66044 Clip with Screw for 21571 1 24823 Front Glass 606x567mm for 21571 13 24825 Cover of Heater for 21571 26

24746 Plug and Power Cord for 21571 2 24813 315 Shelf for 21571 14 24772 GN Pan for 21571 27

41081 Thermostat with Knob for 21571 3 24814 350 Shelf for 21571 15 26019 Fluorescent Tube only 8 Watt for 21571 28

24749 Indicator Light for 21571 4 24815 360 Shelf for 21571 16 21436 Right or Left Side Glass for 21571 29, 30

24750 Switch for 21571 5 24816 Vertical Support for 21571 17 28733 Base Cover for 21571 31

24751 Temperature Display for 21571 6 66066 Left Bracket for Shelf for 21571 18 66059 40W Light Holder for 21571 32

24806 Bracket of Heater for 21571 7 24764 40W Light for 21571 19 66068 Right Bracket for Shelf for 21571 33

24807 Heater for 21571 8 24819 Middle-Level Assembly for 21571 20 66069 Light Tube Holder for 21571 34

24808 Base for 21571 9 24766 110V Ballast for 21571 21 28737 Right Fluorescent Tube Cover for 21571 35

24755 Plastic Foot for 21571 10 24821 Top Cover for 21571 22 28738 Left Fluorescent Tube Cover for 21571 36

24810 Door Guide for 21571 11 24822 White Decorating Plate for 21571 23

24770 Front / Back Door Handle for 21571 12, 25 24812 Back Glass 590x567mm for 21571 24

Electrical Schematics

Model DW-CN-0902 21570

Model DW-CN-0686 21749

Model DW-CN-1194 21571

Notes

________________________________________________________________________________________

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 6,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 6,500 productos con origen a nivel mundial.

Omcan DW-CN-0902 Manuel utilisateur

Marque: Omcan

Modèle: DW-CN-0902

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Omcan DW-CN-0902 User manual
español: Omcan DW-CN-0902 Manual de usuario

Omcan DW-CN-0902 Manuel utilisateur

Omcan DW-CN-0902 Manuel utilisateur

dans d''autres langues

Documents connexes