Omcan DW-CN-0457-SS Manuel utilisateur

Revised - 03/14/2022

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Pizza Warmer

Model DW-CN-0457-SS

Item 41468

Instruction Manual

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 6

-------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 7 - 9

----------------------------------------------------------------------------------- 9 - 10

----------------------------------------------------------------------------------- 10

---------------------------------------------------------------------------- 11 - 12

---------------------------------------------------------------------------- 13

------------------------------------------------------------------------------------------------- 14

---------------------------------------------------------------------------- 15

Section

General Information

Safety and Warranty

Technical Specications

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model DW-CN-0457-SS

Table of Contents

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

Safety and Warranty

General Information

WARNING

1. If the supply cord is damaged it must be replaced by Omcan, or a qualied service agent in order to avoid

any electrical hazards.

2. This appliance shall not be cleaned with any type of liquid pressurized cleaning equipment.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given specic instruction

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5

with proper supervision concerning the use of this appliance.

4. Under no circumstances should any children be allowed to operate this equipment unless properly

supervised.

5. This equipment comes with a properly grounded power cord. All power receptacles should be installed with

a properly installed grounded circuit.

SAFE OPERATION NOTICE

• All operators must strictly observe and follow local state or provincial electrical safety codes and guidelines.

• This unit must be used by qualied and trained personnel at all times. Staff should be instructed on proper

daily operation and maintenance prior to usage.

• Before operating machine, ensure that all covers, doors and moving components are installed properly

and working prior to usage. This will ensure unit is in safe operating order and provide years of long lasting

service.

Warranty does not apply to the following conditions:

• Improper uses other than what the unit was originally designed.

• In the case of damaged parts, do not continue to use the unit as you will void the warranty. Contact Omcan

or your local dealer.

• Neglect and improper operating procedures during installation and or in transportation, commissioning,

maintenance or repair.

• All warranty repairs must be authorized by the original manufacture by means of written consent.

• Warranty parts can be supplied and installed by means of a authorized service agent hired or contracted

by Omcan only. Unauthorized service will void all warranties without prior written consent from Omcan.

Improper daily maintenance.

• Use of Force Majeure.

ELECTRICAL

When rst installed, ensure proper power requirements are met. A standard 15A / 110-120V grounded

receptacle must be utilized.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Safety and Warranty

6

This pizza warmer is mainly utilized in commercial spaces such as fast-food restaurants, convenience stores

along with self-service restaurants and supermarkets.

FEATURES OF OUR PRODUCTS

• The unit comes with two orescent lighting xtures which increases the view ability of the product being

displayed.

• The unit also features adjustable humidity and heat controls which allow greater exibility to improve overall

product freshness and consistency.

• The unit thermostat control allows for even heat during the warming period on all food surfaces.

TECHNICAL SPECIFICATIONS

Model DW-CN-0457-SS

Power 1.5 kW

Temperature 30 - 90°C / 86 - 194°F

Interior Lights 2 W (LED)

Maximum Pizza Size 18” / 457mm Diameter

Electrical 110V / 60Hz / 1Ph

Weight 70.5 lbs. / 32 kgs.

Packaging Weight 77 lbs. / 35 kgs.

Dimensions 23.6” x 25.3” x 27.6” / 600 x 642 x 700mm

Packaging Dimensions 27” x 28” x 29.5” / 686 x 711 x 749mm

Item Number 41468

Technical Specications

Safety and Warranty

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

7

To start:

1. Put plug in power source.

2. Turn the power switch to the “I” position.

● The display will light up and the heating element will start.

● “LO H2O” will ash once on the display until water tank is lled with water. Once the tank is full, “LO H2O”

will stop ashing and the display will show cabinet temperature.

3. Fill the tank up with water.

● Turn up the tank cover.

● Inject water until “LO H2O” stops ashing.

Note: Don’t inject water excessively.

4. Set the humidity parameters as required.

5. Set the temperature parameters as required.

6. Please wait 20 minutes before you put food into the machine.

SET TEMPERATURE

1. Press the “ ” button to start (the display will show “tSP”).

2. Press the “ ” button again, the display will show current cabinet temperature.

3. Press “ ” or “ ” to modify the temperature. The range is 30°C to 90°C.

4. Don’t press any buttons for 15 seconds, so the temperature setting will be stored. The display will come

back to normal mode.

Note: The temperature values are set to °F when rst received, to change between °F and °C please

follow the below instructions.

TO CHANGE THE TEMPERATURE VALUES FROM °F - °C

CAUTION

Ensure that the unit is turned off and removed from it’s power source before starting this process.

1. Remove the three screws from the top cover of the machine.

Operation

8

Operation

2. Remove the light tube and it’s left bracket (Fig. 1).

3. Remove the six screws from the black control box, then remove the cover of the black control box.

4. Locate the switch on the circuit board that shows °F and °C. Switch that part only to change the values

from F to C (Fig. 2).

5. Reassemble the machine by following these instructions in reverse order.

Note: please revisit these instructions if you need to change the values back to °F.

SET HUMIDITY

1. Press the “ ” button to start (the display will show “hSP”).

2. Press the “ ” button again, the display will show current cabinet humidity.

3. Press “ ” or “ ” to modify the humidity. The range is 1 to 5.

4. Don’t press any buttons for 15 seconds, so the humidity setting will be stored. The display will come back

to normal mode.

FIG. 1

FIG. 2

9

Maintenance

Operation

• Daily maintenance should be carried out with all power to the unit in the off position, and the electrical cord

unplugged. Cleaning should be carried out by means of food grade cleaning solutions via a soft or damp

cloth. Do not utilize any type of pressurized water equipment.

• Regular inspection on the outside and internal cabinet along with the power cord should be observed and

carried out on a regular basis to isolate and or observe any unforeseen failure or safety concern.

CLEANING AND INSTALL ROTARY SHELF

1. Open glass door.

2. Loosen top screws.

3. Take out the rotary shelf.

Warning: cleaning outside and inside the cabinet must be made with the power off at all times.

NOTES

Different kind of food will affect temperature and humidity setting. Temperature on display is the lowest

temperature in cabinet, not food temperature.

Full-injected water tank can continuously work for 3 to 6 hours. Working time depends on the different

parameter setting, ambient humidity and frequency of door opening. When the display ashes “LO

H2O” please add water immediately!

10

Troubleshooting

Problem Possible Cause Solution

No lighting in the interior cabinet. No power. Inspect power source.

Florescent lamps failure. Replace uorescent tubes.

Rotating shelf has stopped. Motor damage. Replace motor.

Front door not completely closed. Close front door / check magnetic

door sensor.

Interior cabinet heat is not warming

up.

Thermostat off. Dial in temperature.

Thermostat or heater coil failure. Contact Omcan.

ERROR CODES

Error Code Meaning

E1 RT1 (Temperature probe of air inside) is short-circuited or disconnected.

E2 RT2 (Temperature probe of water box) short-circuited or disconnected.

E3 Low water level.

E4 Water level probe is faulty.

Maintenance

Note: An optional Pretzel Shelf (Omcan Item 44070) is also available and the procedure for assembly/

disassembly is the same as above.

11

Parts Breakdown

Model DW-CN-0457-SS 41468

12

Parts Breakdown

Model DW-CN-0457-SS 41468

Item No. Description Position Item No. Description Position Item No. Description Position

70819 Rubber Feet Left for 41468 1 AJ413 Motor for 41468 23 AJ433 Door Magnet Strip for 41468 45

70820 Rubber Feet Right for 41468 2 AJ414 Spring for 41468 24 70866 Magnet for 41468 46

AJ396 Top Cover for 41468 3 AJ415 Upper Clutch for 41468 25 AJ434 Water Box Cover for 41468 47

AJ397 U Cover for 41468 4 AJ416 Motor Bracket for 41468 26 70862 Thermostat T1/33 for 41468 48

AJ398 Rear Top Cover for 41468 5 AJ417 Lower Clutch for 41468 27 AJ435 Temperature Sensor for 41468 49

AJ399 Front Top Cover for 41468 6 AJ418 Rotary Shelf for 41468 28 AJ436 Float for 41468 50

AJ400 Screw for 41468 7 AJ419 Rear Pillar for 41468 29 60212 Double-Faced Protective Ring C6 for

41468 51

AJ401 Top Insulation for 41468 8 AJ420 Wind Guiding Path for 41468 30 AJ437 Seal for 41468 52

AJ402 O Ring for 41468 9 AJ421 Front Pillar for 41468 31 AJ438 Top Panel for 41468 53

AJ403 Inlet Pipe for 41468 10 AJ422 Wires Clip Holder for 41468 32 67295 Door Pin for 41468 54

AJ404 Infall Box Cover for 41468 11 61246 Wire Clip Holder for 41468 33 67296 Upper Hinge Back for 41468 55

AJ405 Infall Box for 41468 12 61245 Wire Clip Cover for 41468 34 AJ439 U Box for 41468 56

AJ406 Circuit Board for 41468 13 AJ423 Wind Guiding Path Bracket for 41468 35 AJ440 U Wind Guiding Panel for 41468 57

AJ407 Operation Sticker for 41468 14 AJ424 Power Plug for 41468 36 AJ441 Heating Element 1 for 41468 58

71514 Switch for 41468 15 AJ425 Shelf Bearing for 41468 37 AJ442 Fan Motor for 41468 59

68356 Driver for 41468 16 AJ426 Bottom Cover for 41468 38 AJ443 Seal for 41468 60

AI741 LED Light Tube for 41468 17 AJ427 Bottom Board for 41468 39 AJ444 Bottom Insulation for 41468 61

AJ408 Transformer for 41468 18 AJ428 Front Bottom Panel for 41468 40 AJ445 Front Insulation for 41468 62

AJ409 Side Glass for 41468 19 AJ429 Back Bottom Panel for 41468 41 AJ446 Top Insulation for 41468 63

AJ410 Micro Switch for 41468 20 AJ430 Door Frame for 41468 42 AJ447 Top Light Glass for 41468 64

AJ411 Micro Switch Bracket for 41468 21 AJ431 Door Glass for 41468 43 70844 Transparent Lamp Cover for 41468 65

AJ412 Back Glass for 41468 22 AJ432 Door Handle for 41468 44

13

Electrical Schematics

Model DW-CN-0457-SS 41468

14

Notes

________________________________________________________________________________________

15

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 6,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 6,500 productos con origen a nivel mundial.

Omcan DW-CN-0457-SS Manuel utilisateur

Omcan DW-CN-0457-SS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents