Geemarc AMPLIPOWER40 Mode d'emploi

Multifunction telephone

Téléphone multifonctions

Multifunktionstelefon

!!!Warning, AmpliPOWER40/50 has an extra loud receiving

volume gain!!! (Risk of acoustic shock)

!!!Attention, l’AmpliPOWER40/50 possède un amplifiacteur

de volume très puissant!!! (Risque de choc accoustique)

!!!Seien Sie vorsichtig: der AmpliPOWER40/50 hat ein sehr

starke Lautstärke!!! (Akustisches Schockrisiko)

English P2

Français P15

Deutsch P28

1

!!! User manual to read carefully before start to

use !!!

!!! Manuel d’utilisation à lire impérativement avant

la mise en service !!!

!!! Bevor Ihr neues Telefongerät zu benutzen,

bitte lesen Sie dies Benutzerhandbuch sehr

sorgfältig !!!

CAUTION: this telephone is specifically designed for the people with

hearing difficulties and is provided with a handset earpiece volume

control for individual requirements. Due care must be taken by all

users that the handset earpiece volume control is set to the lowest

level acceptable by each respective user. Care should therefore

be exercised to ensure that any naive users are familiar with this

requirement.

Normal operating temperature for the product (e.g. 0

o

C ~ 40

o

C).

ATTENTION: Ce téléphone peut être destiné aux personnes ayant

des problèmes auditifs. il possède un écouteur a volume variable.

A la première utilisation, assurez vous que le volume soit réglé au

minimum. Les personnes malentendantes pourront par la suite

augmenter le volume pour l’adapter à leur besoin.

Température d’utilisation du produit (de 0°C ~ 40

o

C).

WARNUNG

: Dieses Telefon wurde speziell für schwerhörige

Personen konzipiert und besitzt eine auf die individuellen Bedürfnisse

einstellbare Hörerlautstärke. In Folge dessen sollten alle Nutzer

darauf achten, dass der Lautstärkeregler des Hörers, in Rücksicht

auf andere Nutzer, auf das niedrigste Niveau gestellt wird. Es ist

darauf zu achten, dass unwissende Benutzer mit der Handhabung

dieser Apparatur vertraut gemacht werden.

Normale Betriebstemperatur für das Produkt (z.B. 0°C ~ 40°C).

2

!!!Please refer to our website: www.geemarc.com for an up to

date user guide, as there may be important updates and

changes you need to be aware of !!!

Description .................................................................... 3

Setting up ...................................................................... 5

1- Connecting the telephone ................................................. 5

2- Alarm abd ring options ...................................................... 5

- Ring only .......................................................................... 5

- Ring and shaker .............................................................. 5

- Ring and flash LED .......................................................... 5

3- Ringer settings .................................................................. 6

4- Tone/Pulse switch (T/P) .................................................... 6

5- Time break recall setting (300/100) ................................... 6

6- Hotel message waiting switch ........................................... 7

7- Wall mounting .................................................................... 7

Using the phone ............................................................ 8

8- Answering incoming calls .................................................. 8

- Without headset ............................................................... 8

- With headset (option) ...................................................... 8

- In handsfree mode ........................................................... 8

9- Volume and tone receiving ............................................... 8

10- Making a call ................................................................. 10

11- Last number redial ........................................................ 10

12- Recall, * & # buttons ...................................................... 10

13- Mute button ................................................................... 11

14- Storing telephone numbers ........................................... 11

15- Dialling stored number .................................................. 11

Options ........................................................................ 12

16- Direct Vibe handset ....................................................... 12

17- Shaker ........................................................................... 12

18- Headset with microphone ............................................. 12

General informations ................................................. 13

Index

3

1. 3 emergency numbers 10. Flashing incoming ring indicator

2. Reception tone adjustment 11. Mute

3. Clip for wall mounting

12. Handsfree/Headset Key( )

4. Speaker volume adjustment

13. Direct memories

5. Reception volumen

adjustment

14. Ring alarm setting

6. Handset cord socket 15. Ring Hi / Low / OFF Switch

7. Last number redial 16. Extra volume and tone

adjustment

8. Time break recall

17. Red light of tone / volume

activation

9. Memory storing

Description

4

18. Line socket 24. Memo card

19

.

Adaptator socket

(AmpliPOWER40: DC9V)

(AmpliPOWER50: DC12V)

25. Dialling mode Pulse/Tone

20. Volume and tone adjustment

ON/OFF switch

26. Time break recall

21. Hotel switch message 27. Battery compartment

22. Shaker socket 28. Handset cord

23. Headset socket 29. Holes for wall mounting

Description

5

1 – Connecting the telephone

- Connect the handset cord (1).

- Open the battery door by unscrewing the retaining screw.

Insert 4 x AAA alkaline batteries (not included) (2). In case

of power failure, batteries are required for the ring.

- Snap the battery door back in place.

- Connect the line cord (*) (3).

- Connect the shaker cord (optional).

- Connect the headset cord (optional).

- Connect the PTT plug to the wall socket (*) (3)

- Connect the adaptor cord to the telephone (4).

- Connect the adaptor to you wall socket (**)(4).

(*) Classified TNV-3 according to EN62368-1 standard.

(**) Classified “hazardous voltage” according to EN62368-1 standard.

2 – Alarm and ringer volume setting

A 3 position switch located on the right side of the phone allows

the settings below:

0

: Only the ringer is activated.

: Ringer and shaker are activated.

: Ringer and flash LED are activated.

Setting up

6

3 – Ringer settings

A switch located on right side allows the ringer to be switched

HI, LOW, OFF :

: Off, : Low,

: Hi.

Your phone comes with the ringer switched to «High» and the

melody set to «6».

Low Mid High

Melody 1 1 2 3

Melody 2 4 5 6 (by default)

Melody 3 7 8 9

If you don’t like the ringer melody,you can choose a new one

by changing the settings as follow:

- Lift the handset.

- Press utton.

- Press # button.

- Press any button 1 to 9.

Ringer will be activated on next call.

4 –Tone/Pulse switch (T/P)

The Tone/Pulse switch is factory pre-set to Tone position. In

the UK, all telephone exchanges now use Tone (T) dialing. If

your phone does not dial out, it is probably being used from an

older private switch board (PBX). In this case, the Tone/Pulse

switch must be changed to Pulse (P).

5 – Time Break Recall setting (300/100)

For the UK, the TBR switch is factory pre-set to 100ms. It can

be switched to 300ms for other locations or PBX’s.

Setting up

7

6 – Hotel message waiting switch

These are used with the new services provided on hotel network.

A switch located behind your phone allows to set ON the

hotel message waiting function.When the switch is setting ON

and when you receive a message, the red light is lit to inform

you that you have a message on the phone.

7 – Wall mounting

Drill 2 holes in the wall (80 mm apart).

Insert the wall plugs and the screws leaving about 6 mm of

the screws projecting from the wall. Slide the telephone

downwards to secure.

Setting up

Wall mount template

Screw

8

If you are using this telephone with a

hearing aid, set your hearing aid to

the “T” setting.

8 – Answering incoming call

Without headset :

- When an incoming call is received the phone will ring and flash,

to answer the call lift the handset and speak.

- On completion of the call, carefully replace the handset in the

cradle to release the line.

With headset (option) :

- When an incoming call is received and if you wish to answer

the call with the headset, press button and speak.

- On completion of the call, press button again to release

the line.

In handsfree mode :

- When an incoming call is received the phone will ring, to

answer the call press button.

- On completion of the call, press the button to release

the line.

9 – Receiving volume and tone adjustment

You can increase the volume and adjust the receiving tone

according to your own hearing requirements.The button +40dB

allows extrareceiving and tone functions to be activated

or not during the conversation.

When the function is activated, the red light of extra receiving

and tone function located near the button is lit. Adjust

the TONE and VOLUME buttons to move the level to your own

hearing requirements.

Using the phone

9

Note :

l When the switch located behind the phone is ON, the extra

- receiving and tone functions are automatically activated

each time you use the phone. When the is switched OFF,

you will need to activate the function by pressing the button

+40dB (or +60dB for the AmpliPOWER50).

l Tone and volume adjustment (20dB à 40dB for the

AmpliPOWER40 and 30dB à 60dB for the AmpliPOWER50)

is only activated when the button

is set to ON.

l When this button is set to OFF only the volume can be

adjusted from 0dB to 20dB (0dB à 30dB for the

AmpliPOWER50).

Using the phone

TONE

Normal

AmpliPOWER40

VOLUME

0 dB 20 dB

20 dB* 40 dB*

(

*

press button +40 dB )

AmpliPOWER50

VOLUME

0 dB 30 dB

30 dB** 60 dB**

(

**

press button +50 dB )

10

10 – Making a call

Without headset :

- Lift the handset.

- Await the dial tone and dial required number

- On completion of the call,carefully replace the handset in the

cradle.

With headset (option) :

- Press the button.

- Await the dial tone and dial required number.

- On completion of the call, press the button again to clear

the line.

In handsfree mode :

- Press the button.

- Await the dial tone and dial required number.

- On completion of the call, press the button to release

the line.

- If your correspondent doesn’t answer your call, press the

button again to release the line.

Note :

l To deactivate the handsfree function during a call, lift the

handset. To activate the handsfree function during a call,

press the button and place the handset on the cradle.

l During a call in handsfree, you can adjust the speaker volume

to a desirable level. Simply use the slide control VOLUME

located on the left of the unit.

11 – Last number redial

- Lift the handset.

- Await the dial tone and press button.

-The previously dialled number will be automaticaly redialled

(not in use for memory numbers).

12 – Recall (R), * & # buttons

These are used with the new services provided on digital

exchanges. For details please contact your network operator.

Using the phone

11

13 – Mute button

If you wish to speak privately to someone else in the room

without your caller overhearing, press and hold the button.

You will still be able to hear the callers but they cannot hear you

during the mute operation. To resume normal conversation,

release the button.

14 – Storing telephone numbers

Your telephone can store12 direct memories including 3 priority

numbers (21 digits maximum for each memory).

For example, the 3 priority P1, P2, P3 memories allow you to

store the 3 numbers below:

= Fire

= Police

= Doctor

To store a number please follow instructions below:

- Lift the handset.

- Press button.

- Press M1, M2, ..., or M9 or one of 3 priorities numbers to store

your number.

- Dial the number.

- Press button again.

Numbers will be lost after a few hours if you disconnect your

phone. Entering a new number in memory will automatically

erase the previous number.

15 – Dialing stored numbers

- Lift the handset and await the dial tone.

- Press appropriate button M1, M2, ..., or M9

or one of 3 priority memories, the stored

number will be dialled automatically.

To register your stored phones numbers,

use the index located under the base.

P1

P

3

P

2

Using the phone

12

16 – Direct vibe handset (optional)

If you have conductive hearing loss you can use a Direct Vibe

Handset, try placing the Direct Vibe handset on your telephone,

in front and slightly below your ear or behind your ear to see

which position works best for you.

If you require a Direct Vibe Handset ref: CLA4 you may purchase

it from your retailer or audiologist.

In case of difficulty please visit our website www.geemarc.com

To set up the Direct Vibe handset, disconnect the standard

handset from the curly cord, then replace it with the Direct Vibe

handset.

17 – Shaker (optional)

If you wish to compliment your phone by using a SHAKER ref:

CLA2 connect the shaker plug in the socket located over

the back edge of the telephone. When an incoming call is

received, the shaker will be activated when the phone rings.

Note : This option must be set in the ALARM AND RINGER

OPTIONS item (page 5) to be activated. To purchase a SHAKER

see item 1 above.

18 – Headset with microphone (optional)

If you wish to answer or make calls by using a Geemarc headset

ref: CLA3, connect the headset plug in the headset socket

located over the back edge of the telephone.

Note: When using a headset, the speaker will be activated and

it’s recommended to adjust the speaker to the low position.

Options

13

Recycling directives:

The WEEE (Waste Electrical and Electronic Equipment) has been

put in place for the products in end of life are recycled in the best way.

When this product is out of order, please do not put it in your domestic

waste bin.

Please use one of the following disposal options :

- Remove the batteries and deposit them in an appropriate WEEE

skip.

Deposit the product in a appropriate WEEE skip.

- Or hand the old product to the retailer. If you purchase a new one,

they should accept it.

Thus if you respect these instructions you ensure human health and

environmental protection.

Guarantee:

From the moment your Geemarc AmpliPOWER40/50 is purchased,

Geemarc guarantee it for the period of two years. During this time,

all repairs or replacements (at our option) are free of charge. Should

you experience a problem then contact our helpline or visit our

website at www.geemarc.com. The guarantee does not cover

accidents, negligence or breakages to any parts. The product must

not be tampered with or taken apart by anyone who is not an

authorised Geemarc representative. The Geemarc guarantee in no

way limits your legal rights.

Important: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND

MUST BE RETAINED AND PRODUCED IN THE EVENT OF A

WARRANTY CLAIM.

Telephone connection: Voltages present on the telecommunication

network are classified TNV-3 (Telecommunication Network Voltage)

according to the EN62368-1 standard.

The telephone does not operate if the line current is lower than 18mA.

Declaration : Hereby Geemarc Telecom SA declares that this

AmpliPOWER40/50 is in compliance with the essential requirements

and other relevant provisions of the Radio and Telecommunications

Terminal Equipment Directive 2014/30/EU and in particular article 3

section 1a, 1b and section 2.

The declaration of conformity may be consulted at

www.geemarc.com

General informations

14

Statement for Battery:

l Caution: Risk of explosion if battery is an incorrect type; Dispose

of used batteries according to the instructions.

l The applied nameplate is located at the bottom the product.

l The mounting height of the equipment should be less than 2 meters.

l Avoid using battery in following conditions:

--High or low extreme temperatures that a battery can be subjected

to during use, storage or transportation;

--Low air pressure at high altitude;

--Replacement of a battery with an incorrect type that can defeat

a safeguard;

--Disposal of a battery into fire or a hot oven, or mechanically

crushing or cutting of a battery that can result in an explosion;

--Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of

flammable liquid or gas;

--Extremely low air pressure that can result in an explosion or

the leakage of flammable liquid or gas.

l For pluggable equipment, the socket-outlet (power adaptor) shall

be installed near the equipment and shall be easily accessible.

l Use only power adaptor supplied with the product.

For servicing or replacement, you can purchase a suitable headset

through service center or retailer shop.

For product support and help visit our website at

www.geemarc.com

E-mail : help@geemarc.com Telephone : 01707 387602

lines are open 09h00 to 16h00 Mon to Fri

2 rue Galilée, Parc de l’Etoile, 59791 Grande-Synthe Cedex,

France

This product is made in China To Geemarc Telecom

General informations

15

!!! Vérifiez si une version plus récente de ce guide d'utilisation

est disponible sur notre site Internet www.geemarc.com !!!

Description .................................................................. 16

Installation ................................................................... 18

1- Raccordements ............................................................... 18

2- Options d’alarme et de sonnerie ..................................... 18

- Sonnerie seule ............................................................... 18

- Sonnerie et vibreur ........................................................ 18

- Sonnerie et flash ............................................................ 18

3- Réglage de la sonnerie ................................................... 19

4- Fréquence vocale/décimale (T/P) ................................... 19

5- Interrupteur 270ms/100ms .............................................. 20

6- Service messagerie d’hôtel ............................................. 20

7- Position murale ................................................................ 20

Utilsation ...................................................................... 21

8- Répondre à un appel ....................................................... 21

- Sans le casque .............................................................. 21

- Avec le casque (option) ................................................. 21

- En mode mains libres .................................................... 21

9- Réglage du volume et de la tonalité de réception ........... 21

10- Appeler .......................................................................... 23

11- Rappel du dernier numéro (bis) .................................... 23

12- Touches R, * & # ........................................................... 23

13- Fonction secret .............................................................. 24

14- Mémoriser un numéro de téléphone ............................. 24

15- Appel d’un numéro en mémoire .................................... 24

Options ........................................................................ 25

16- Combiné Direct Vibe ..................................................... 25

17- Vibreur ........................................................................... 25

18- Casque avec microphone ............................................. 25

Garantie ....................................................................... 26

Sommaire

16

1. 3 mémoires d’urgence 10. Flash lumineux de sonnerie

2. Réglage de la tonalité de

réception

11. Secret

3. Ergot de position murale

12. Mains libres/Casque ( )

4.

Réglage du volume du haut

parleur

13. Mémoires directes

5. Réglage du volume de

réception

14. Option d’alarme et de sonnerie

6. Prise de cordon combiné 15. Réglage du volume de

sonnerie(arrêt, faible, fort)

7. Rappel du dernier numéro

composé

16. Activation de la correction de

tonalité et volume de réception

8. Touche R

17. Voyant du correcteur de tonalité

et volume

9. Mise en mémoire

Description

17

18. Prise cordon de ligne 24. Index mémoires

19. Adaptateur

(AmpliPOWER40: DC9V)

(AmpliPOWER50: DC12V)

25.

Numérotation Décimale (P)

ou Multifréquences (T)

20. Activation automatique de la

correction d’écoute au

décroché

26. Réglage du temps de

coupure de la fonction

R(270/100ms)

21.

Service de messagerie d’hôtel

27. Compartiment à piles

2

2. Vibreur

28.

Prise de cordon combiné

23.

Prise casque

29.

Orifices de fixation murale

Description

18

1 – Raccordements

- Branchez le cordon du combiné (1).

- Ouvrez le compartiment à piles (2). Inserez 4 piles (AAA) dans

le compartiment situé en dessous de l’appareil ( piles non

incluses).En cas de coupure secteur, les piles sont necessaires

au fonctionnement de la sonnerie.

- Branchez le cordon de ligne. (*) (3)

- Branchez le cordon du vibreur si besoin (option).

- Branchez le cordon du casque si besoin (option).

- Branchez le conjoncteur téléphonique dans votre prise

téléphonique murale. (*) (3)

- Branchez le cordon d’adaptateur secteur. (4)

- Branchez l’adaptateur secteur au réseau électrique. (**) (4).

(*)Classée TNT-3 selon la norme EN62368-1.

(**) Classé «tension dangereuse» selon la norme EN62368-1

2 – Options d’alarme et de sonnerie

Un commutateur 3 positions situé sur le côté droit de l’appareil

vous permet de choisir le type d’alarme :

0

: seule la sonnerie est activée.

: la sonnerie et le vibreur sont activés.

: la sonnerie et le flash sont activés.

Installation

19

3 – Réglage de la sonnerie

Un commutateur situé sur le côté droit de l’appareil permet de

régler la sonnerie :

: désactivée, : faible,

: forte.

Votre téléphone est positionné sur «Forte» et la mélodie est

positionnée sur «6».

Si la sonnerie ne vous convient pas,sélectionnez un nouveau

réglage parmi les 9 proposés cidessous

Faible Moyen Fort

Melodie 1 1 2 3

Melodie 2 4 5 6 (par défault)

Melodie 3 7 8 9

Suivez la procédure décrite ci-dessous pour changer le réglage:

- Décrochez le combiné.

- Appuyez sur la touche .

- Appuyez sur la touche #.

- Appuyez sur un chiffre de 1 à 9.

4 – Fréquence vocale/décimale(T/P)

Au moment de sa livraison, votre téléphone est en mode

fréquence vocale (T). Si le central téléphonique dont vous

dépendez fonctionne en mode fréquence décimale (P), vos

appels n’aboutiront pas,il vous suffira alors de commuter

l’interrupteur T/P situé en dessous du téléphone sur la position

P pour remédier à ce problème.

Installation

La page est en cours de chargement...

Geemarc AMPLIPOWER40 Mode d'emploi

Ce manuel convient également à

Geemarc AMPLIPOWER40 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents