Sherwood S9 SOUND PANORAMA Operating Instructions Manual

SOUND PANORAMA

SON PANORAMIQUE

SONIDO PANORAMA

OPERATING INSTRUCTIONS

GUIDE D’UTILISATION

INSTRUCCIONES DE FUNCIONAMIENTO

2

Safety Information

READ THIS BEFORE OPERATING YOUR UNIT

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE FRONT OR BACK COVER.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates the presence of uninsulated "dangerous voltage" within

the product’s enclosure that may be of sufcient magnitude to constitute a risk of

electric shock.

This symbol indicates important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

•

Leave space around the unit for sufcient

ventilation.

•

Avoid installation in extremely hot or cold

locations, or in an area that is exposed to

direct sunlight or heating equipment.

•

Keep the unit free from moisture, water, and

dust.

•

Do not let foreign objects in the unit.

•

Keep the ventilation openings clear of items,

such as newspapers, linens, or curtains.

•

Keep open ame from candles or other

sources away from the unit.

•

Observe the local regulations regarding

disposal of packaging materials, exhausted

batteries and old equipment.

•

Do not expose the unit to dripping or

splashing, or place objects lled with liquids

such as vases.

•

Do not let insecticides, benzene, or thinner

come in contact with the unit.

•

Never disassemble or modify the unit in any

way.

Notes on the AC power cord and the wall

outlet

•

The unit remains connected to AC power

as long as it is plugged into the wall outlet,

even if the unit has been turned off.

•

To completely disconnect this product from

AC power, disconnect the plug from the wall

socket outlet.

•

When setting up this product, make sure

that the AC outlet you are using is easily

accessible.

•

Disconnect the plug from the wall outlet

when not using the unit for long periods of

time.

Safety Information

English

3

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(a) This device may not cause harmful interference, and

(b) This device must accept any interference received, including interference that may

cause undesired operation.

(FCC Part 15.21) Caution: changes or modications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

For Canadian customers:

This Class B digital apparatus complies with Canadian ICES-003.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20 cm

between the radiator and your body.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

S9/S7 3D Sound Soundbar

4

Important Safety Instructions

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specied by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of

time.

14 Refer all servicing to qualied service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

5

English

Table of Contents

2 SAFETY INFORMATION

6 GETTING STARTED

6 What's Included

7 Parts Description

10 INSTALLATION

10 Installing the System

11 Installing the Remote Control Battery

12 CONNECTIONS

12 Subwoofer Connection

12 Connecting to HDMI Components

14 Connecting to Audio Components

15 Connecting the FM Antenna (Only for S9)

15 Power Connection

16 OPERATION

16 Listening to Your System

18 Listening to USB (Only for S9)

20 Listening to FM Radio (Only for S9)

22 Listening to Music via Bluetooth (Only for S9)

23 SETTINGS

23 Setting the System

25 TROUBLESHOOTING

27 SPECIFICATIONS

28 TRADEMARKS AND LICENSES

29 INDEX

6

Getting Started

What's Included

Main unit

Remote control (1 ea) Battery (1 ea) HDMI cable (1 ea)

Power adapter (1 ea)

FM antenna (1 ea)

(Only for S9)

User manual (1 ea)

Getting Started

English

7

Parts Description

Front Panel

21 3 4 5

1

Sherwood BRAND

2

Power Button

Press to turn the main unit on or turn off to

standby mode.

Input Selector

Rotate to select an input source for playback.

3

Display Panel

Displays the current status of the main unit.

4

Volume Controller

Adjusts the volume level.

5

USB Port (Only for S9)

Connects a USB device.

S9/S7 3D Sound Soundbar

8

Rear Panel

3 4

7

6

5

1

2

1

HDMI OUT

See page

12.

2

HDMI IN 1/2/3

See page

12.

3

DC IN

See page

15.

4

FM TUNER (Only for S9)

See page

15.

5

SUBWOOFER PRE OUT 1/2

See page

12.

6

AUX IN R/L

See page

14.

7

OPTICAL IN

See page

14.

Getting Started

English

9

Remote Control

1 11

10

9

7

6

2

3

4

5

8

1

SETUP

Enters or exits the system setup menu.

2

SURROUND

Selects surround mode.

3

DISPLAY

Displays the current status of the main unit.

4

MUTE

Mutes or activates the sound.

5

(

USB

)

Starts or pauses playback.

SEARCH.M (

FM TUNER

)

Searches FM tuner stations.

(

USB

)

Stops playback.

MO/ST (

FM TUNER

)

Toggles between FM stereo and mono modes.

/ (

USB

)

Skips to the next or returns to the previous le

or track.

REPEAT (

USB

)

Selects a repeat function.

RANDOM (

USB

)

Selects random playback.

6

SLEEP

Sets a certain period of time for the main unit

to be turned off.

7

DIMMER

Dims or brightens the display panel.

8

/ / /

•

Selects a le, folder, or track for music les.

•

Selects a setting option or menu.

TUNE +/ TUNE -

Tunes to a desired FM station.

PRESET -/PRESET +

Selects a preset FM station.

ENTER/MEMO

•

Conrms the selection.

•

Stores a preset station.

9

VOLUME

Adjusts the volume level.

10

INPUT SELECT

Selects an input source for play back.

11

ON/STANDBY

Turns on the main unit or turn off to normal

standby mode.

10

Installation

Installing the System

To Install on a shelf

You can install the main unit on a shelf. Place

the main unit at a height close to ear-level in

the listening area.

When installing the main unit, use a stable

surface to avoid accidents or injury.

To Install on a Wall

You can install the main unit on the wall. Before

installation, see "CONNECTIONS" on page 12

and complete the wiring connections.

5 mm

10 mm

4-5 mm

600 mm

•

When the main unit is installed on a

wall, its weight could cause the screws

to come loose over time, or it may not

be adequately supported by the wall,

resulting in the unit falling. Make sure that

the wall you intend to mount the unit on is

strong enough to support it. Do not mount

on plywood or soft surface walls. If you

are uncertain of the wall quality, consult a

professional for an advice.

•

Sherwood is not responsible for

any accidents or damage that result

from improper installation, misuse or

modication of the product, or from

natural disasters.

•

Mounting screws are not supplied. Use

screws suitable for the wall material and

that can support the weight of the unit. It

is recommended to use 2 inch (50 mm)

long screws.

•

The main unit is magnetically shielded.

However, depending on the installation

location, color distortion may occur if the

main unit is installed extremely close to

the screen of the TV. If this happens,

turn the main unit off, and turn it on after

15 minutes. If the problem persists, move

the main unit further from the TV.

Caution

Installation

English

11

Installing the Remote

Control Battery

1

Press inward to release the lock (1),

and at the same time, slide the battery

holder out of the remote control with your

ngernail (2).

2

Place the "+" (top) side of the battery

down into the battery holder.

3

Push the battery holder back into its

original position.

•

If the battery is placed incorrectly, it can

cause explosion.

•

Use only one CR2025 (3 V) lithium

battery.

•

Remove the battery if the remote control

is not used for a long period of time.

•

Do not leave the product in a hot or

humid place.

•

Do not handle and store the battery with

metallic tools.

Caution

12

Connections

Subwoofer Connection

You can enjoy deep bass sounds by connecting

an active subwoofer.

1

2

Active Subwoofer

•

Do not place objects behind the subwoofer

and block the ventilation ports.

•

Signal reception by the subwoofer may

be unstable if it is placed too close to

the main unit. In this case, separate the

subwoofer at least 1 m from the main

unit.

•

Signal reception by the subwoofer may

be interrupted if an obstruction (metal

door or concrete wall, aluminum covered

insulation, etc.) is placed between it and

the main unit. If this occurs, install the

subwoofer in an uninterrupted line-of-

sight orientation from the main unit.

Caution

Connecting to HDMI

Components

With HDMI, you can easily enjoy high quality

sounds and images. The main unit plays

audio from HDMI compatible products while

also passing on the video signal to a HDMI-

connected TV.

HDMI TV

Blu-ray Player

Cable Box

(RIGHT)

(LEFT)

Connections

English

13

Conrming the HDMI control

functions

To use the HDMI control functions properly,

it is recommended to conrm the HDMI

control functions usable with each connected

component by performing the following

operations.

1

Turn on all the components connected

with HDMI cables.

2

Turn the TV off to standby mode.

•

Conrm that all the components are

turned off.

3

With all the components off, start

playback of a device (connected with

HDMI cable).

4

Conrm that all the components are

turned on and the inputs of the main unit

and TV are switched automatically.

About HDMI

HDMI (High Denition Multimedia Interface)

supports both video and audio on a single

digital connection for use with DVD players,

DTV, set-top boxes, and other AV devices.

HDMI was developed to provide the

technologies of High Bandwidth Digital Content

Protection (HDCP) as well as Digital Visual

Interface (DVI) in one specication. HDCP is

used to protect the digital content transmitted

and received by DVI-compliant displays.

HDMI has the capability to support standard,

enhanced, or high-denition video plus

standard to multi-channel surround-sound

audio. HDMI features include uncompressed

digital video, a bandwidth of up to 2.2 gigabytes

per second (with HDTV signals), one connector

(instead of several cables and connectors), and

communication between the AV source and AV

devices such as DTVs.

This main unit is also compatible with the

DeepColor and x.v.Color feature (x.v.Color is

trademarks of Sony Corporation.).

HDMI, the HDMI logo and High-Denition

Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing, LLC.

•

Check the setup of the connected

component if an image is poor or the

sound does not come out of a component

connected via the HDMI cable.

•

Audio signals (sampling frequency,

bit length, etc.) transmitted from an

HDMI jack may be suppressed by the

connected component.

•

When the connected component is not

compatible with copyright protection

technology (HDCP), the image and the

sound from the HDMI TV OUT jack may

be distorted or may be not output. In

this case, check the specication of the

connected component.

•

Regardless of which input is selected

for the system, the video signal from the

HDMI input jack (BD, DVD, SAT) that was

last selected is output from the HDMI TV

OUT jack.

Note

S9/S7 3D Sound Soundbar

14

Connecting to Audio

Components

AUX Connection

You can connect your audio devices to the

unit and enjoy multichannel surround sound

capabilities.

•

Ensure the left (L) and right (R) channels

and the inputs and outputs are correctly

connected.

•

To listen to the sound of a connected audio

device, select AUX as the input source.

•

To listen to TV audio, select TV as the input

source.

RL

TV, DVD Player, etc.

Optical Connection

You can connect components equipped

with an optical out jack. On the main unit,

you can enjoy more plentifully the sound of

components, such as DVD players, Satellite

receiver/Cable boxes, BD (Blu-ray DiscTM)

players or TVs.

* "Blu-ray Disc" is a trademark of Blu-ray Disc

Association.

TV, DVD Player, etc.

OPTICAL OUT

•

TVs without an optical output jack cannot

be connected to the unit.

Caution

Connections

English

15

Connecting the FM

Antenna (Only for S9)

You can listen to FM radio by connecting the

FM antenna to the FM terminal on the main

unit.

To strengthen the signal reception, extend the

antenna to its full length.

Power Connection

Make sure to plug in after you have connected

all your components to the main unit. Plug the

supplied AC input cord into the AC inlet and

then into the wall AC outlet.

•

The supplied AC adapter is designed

exclusively for use with this unit. Do not

attempt to use it with any device for which

was not expressly designed, since res

or shocks may occur.

•

Handle the power cord by the plug part.

Do not pull out the plug by tugging the

cord, and never touch the power cord

when your hands are wet, as this could

cause a short circuit or electric shock.

•

The system should be disconnected by

removing the main plug from the wall

socket when not in regular use for a long

period of time.

Caution

16

Listening to Your

System

Basic Operation

You can listen to audio by following the basic

procedures below.

1

Turn on the connected component.

2

Turn on the main unit.

•

On the main unit, press PUSH ON/

STANDBY.

•

On the remote control, press ON/

STANDBY

.

3

Select an input source you want to play

back.

•

On the main unit, rotate INPUT

SELECT.

•

On the remote control, press INPUT

SELECT </>.

•

Each time the button is pressed, the

display changes as follows.

S9

HDMI1

→

HDMI2

→

HDMI3

→

TV

→

AUX

→

OPTICAL

→

FM STEREO

→

USB

→

BLUETOOTH

S7

HDMI1

→

HDMI2

→

HDMI3

→

TV

→

AUX

→

OPTICAL

4

Start playback of the component you

selected in step 1.

5

During playback, you can adjust the

volume level.

•

On the main unit, rotate the volume

controller.

•

On the remote control, press

VOLUME -/+.

VOL - VOL +

Muting the Sound

You can mute the sound temporarily by

pressing MUTE.

1

Press MUTE to mute the sound.

2

Press MUTE or VOLUME - / + to turn on

the sound.

Operation

English

17

Selecting Surround Mode

This system uses OPSODIS Technology,

which generates spatial sound, without having

to use walls to reect the sound. This creates

the illusion of three-dimensional acoustics and

enables you to experience the lm soundtrack

and music with a power and intensity not

previously achieved. However, the options

available will depend on the type of source

you’re listening to. The following modes

provide basic surround sound for stereo and

multichannel sources.

1

Press SURROUND to select STEREO,

3D STEREO, or 3D SURROUND.

•

STEREO

STEREO reproduces realistic sound

through the front speakers (and

possibly your subwoofer depending on

your speaker settings). Dolby Digital

and DTS multichannel sources are

downmixed to stereo with the aid of

digital sound processing.

•

3D STEREO

3D STEREO produces more sound

expansion through 2 channel audio

system with the aid of Opsodis sound

processing.

•

3D SURROUND

3D SURROUND enriches the sound

reproduction quality of an 2 or 5.1

audio input source with the aid of

virtual 5.1 channel 3D effects from

speakers that surround the listener.

If the source is Dolby Digital, DTS, or Dolby

Surround encoded, the proper decoding format

will automatically be selected and appear in the

display.

With two channel sources, you can select from:

•

DOLBY Digital

Dolby Digital is a multi-channel digital

signal format developed by Dolby

Laboratories. Discs bearing the Dolby

Digital logo include the recording of

up to 5.1 channels of digital signals.

This will put you right in the middle of

the action, just like being in a movie

theater or concert hall.

•

DTS

DTS Digital Surround (also called

simply DTS) supports up to 5.1

discrete channels and uses less

compression for high delity

reproduction. Use it with DVDs and

CDs bearing the DTS logo.

S9/S7 3D Sound Soundbar

18

Displaying Operation Status

1

Press DISPLAY.

Each time the button is pressed, the

display mode changes as follows:

•

USB

Playback le status

→

Repeat setting

→

Random setting

→

Playback le

status

•

BLUETOOTH

Paired device name

→

Surround

mode

→

Signal input

→

Volume level

→

Paired device name

•

HDMI

→

Surround mode

→

Signal

input

→

Volume level

→

HDMI

Listening to USB

(Only for S9)

You can play audio les from a USB device.

However, editing or copying the data le is not

possible.

•

The USB jack does not support the

connection of other USB devices except

for a USB ash drive or a USB memory

card reader.

•

When the USB device does not t into

the USB jack, a USB extension cable is

required.

•

You can only play back the content from

the connected USB device.

•

Copy-protected contents are not playable.

Note

Operation

English

19

Playback Operation

To Stop Playback

1

During playback, press .

2

To resume playback, press .

To Pause Playback

1

During playback, press .

•

Playback will stop at the point where

the button is pressed.

•

To resume playback from this point,

press the button again.

To Skip Forward or Backward

1

During playback, press or .

•

Each time the button is pressed, a

track is skipped forward or backward.

To Play Repeatedly

1

During playback, press REPEAT.

Each time the button is pressed, repeat

mode changes as follows:

•

Repeat One

Repeats the currently playing music

le.

•

Repeat Fol

Repeats all music les in the folder.

•

Repeat All

Repeats all music les.

To Play Randomly

1

During playback, press RANDOM.

•

"Random On" is displayed on the

display panel.

•

All music les in the folder are played

in random order.

2

To cancel random playback, press

RANDOM again.

•

"Random Off" is displayed on the

display panel.

•

You can only use the skip mode, repeat

mode and random mode when playing

music les stored on a USB memory

device.

Note

S9/S7 3D Sound Soundbar

20

Listening to FM Radio

(Only for S9)

Auto Tuning

1

Press TUNE + or TUNE - for more than

2 seconds.

•

The tuner keeps searching until a

station with strong signal strength is

found. The display shows the tuned

frequency.

•

If the station found is not the desired

one, simply repeat this operation.

•

Stations with weak signal strength are

skipped during auto tuning.

Manual Tuning

1

Press TUNE + or TUNE - repeatedly until

the desired station is found.

Auto Presetting

1

Press and hold down ENTER/MEMO for

more than 2 seconds.

•

"AUTO MEMORY" blinks and the

receiver begins to preset stations with

strong signal.

•

Up to 30 FM stations may be stored.

•

To stop auto presetting, press ENTER/

MEMO again.

•

FM stations with weak signal strength

cannot be stored to memory.

Note

La page est en cours de chargement...

Sherwood S9 SOUND PANORAMA Operating Instructions Manual

Ce manuel convient également à

Sherwood S9 SOUND PANORAMA Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents