Oracle Netra SPARC S7-2 Guide d'installation

SPARC S7-2 Server Installation Guide

Part No: E72375-02

July 2016

SPARC S7-2 Server Installation Guide

Part No: E72375-02

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except

as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform,

publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is

prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation,

delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental

regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the

hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous

applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all

appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this

software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of

SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered

trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are

not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement

between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content,

products, or services, except as set forth in an applicable agreement between you and Oracle.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?

ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Référence: E72375-02

Ce logiciel et la documentation qui l'accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions d'utilisation et

de divulgation. Sauf stipulation expresse de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, accorder de licence, transmettre,

distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute

ingénierie inverse du logiciel, de le désassembler ou de le décompiler, excepté à des fins d'interopérabilité avec des logiciels tiers ou tel que prescrit par la loi.

Les informations fournies dans ce document sont susceptibles de modification sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu'elles soient exemptes d'erreurs et vous

invite, le cas échéant, à lui en faire part par écrit.

Si ce logiciel, ou la documentation qui l'accompagne, est livré sous licence au Gouvernement des Etats-Unis, ou à quiconque qui aurait souscrit la licence de ce logiciel pour le

compte du Gouvernement des Etats-Unis, la notice suivante s'applique :

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation,

delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental

regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the

hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Ce logiciel ou matériel a été développé pour un usage général dans le cadre d'applications de gestion des informations. Ce logiciel ou matériel n'est pas conçu ni n'est destiné à être

utilisé dans des applications à risque, notamment dans des applications pouvant causer un risque de dommages corporels. Si vous utilisez ce logiciel ou ce matériel dans le cadre

d'applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans

des conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent toute responsabilité quant aux dommages causés par l'utilisation de ce logiciel ou matériel pour des

applications dangereuses.

Oracle et Java sont des marques déposées d'Oracle Corporation et/ou de ses affiliés. Tout autre nom mentionné peut correspondre à des marques appartenant à d'autres propriétaires

qu'Oracle.

Intel et Intel Xeon sont des marques ou des marques déposées d'Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des marques ou des marques

déposées de SPARC International, Inc. AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques déposées d'Advanced Micro Devices. UNIX est une

marque déposée de The Open Group.

Ce logiciel ou matériel et la documentation qui l'accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et des services émanant de

tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers, sauf mention contraire stipulée

dans un contrat entre vous et Oracle. En aucun cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des

dommages causés par l'accès à des contenus, produits ou services tiers, ou à leur utilisation, sauf mention contraire stipulée dans un contrat entre vous et Oracle.

Accès aux services de support Oracle

Les clients Oracle qui ont souscrit un contrat de support ont accès au support électronique via My Oracle Support. Pour plus d'informations, visitez le site http://www.oracle.com/

pls/topic/lookup?ctx=acc&id=info ou le site http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs si vous êtes malentendant.

Contents

Using This Documentation ................................................................................. 7

Understanding the Server ................................................................................... 9

Conceptual Overview ....................................................................................... 9

Oracle Software in Silicon Features ............................................................ 9

Installation Task Overview .............................................................................. 10

Server Overview ........................................................................................... 11

Front Panel Components (Installation) ............................................................... 12

Rear Panel Components (Installation) ............................................................... 13

Confirming Specifications ................................................................................. 15

Physical Specifications ................................................................................... 15

Electrical Specifications .................................................................................. 16

Environmental Specifications ........................................................................... 17

Airflow Precautions ....................................................................................... 18

Preparing for Installation .................................................................................. 21

Shipping Kit ................................................................................................. 21

Handling Precautions ..................................................................................... 22

ESD Precautions ........................................................................................... 23

Tools Needed for Installation ........................................................................... 23

Installing the Server .......................................................................................... 25

Optional Components ..................................................................................... 26

Rack Compatibility ........................................................................................ 26

Rack Cautions .............................................................................................. 27

Rackmount Kit Contents ................................................................................. 28

▼ Stabilize the Rack .................................................................................... 29

5

Contents

▼ Install Mounting Brackets Onto the Server .................................................... 30

▼ Mark the Rackmount Location ................................................................... 31

▼ Install AC Power Cables and Slide-Rails ...................................................... 33

▼ Attach Tool-less Slide-Rail Assemblies ........................................................ 34

▼ Install the Server Into the Slide-Rail Assemblies ............................................ 37

▼ Install the Cable Management Arm ............................................................. 39

Cabling the Server ............................................................................................ 51

Rear Cable Connections and Ports .................................................................... 51

SER MGT Port Pinout ................................................................................... 53

RJ-45 Crossover Pinouts ......................................................................... 53

▼ Connect Server Cables .............................................................................. 55

Powering On the Server for the First Time ....................................................... 57

▼ Power on the Server for the First Time ........................................................ 57

Oracle ILOM System Console ......................................................................... 59

Installing the OS ........................................................................................... 60

▼ Configure the Preinstalled Oracle Solaris OS ......................................... 60

▼ Reach a State to Install a Fresh OS (Oracle ILOM CLI) ........................... 61

▼ Reach a State to Install a Fresh OS (Oracle ILOM Web Interface) .............. 63

Assigning a Static IP Address to the SP ............................................................ 65

▼ Log In to the SP (SER MGT Port) ...................................................... 66

▼ Assign a Static IP Address to the NET MGT Port .................................. 67

Index .................................................................................................................. 71

6 SPARC S7-2 Server Installation Guide • July 2016

Using This Documentation

■

Overview – Describes how to install the SPARC S7-2 server

■

Audience – Technicians, system administrators, and authorized service providers

■

Required knowledge – Experience with the Oracle Solaris Operating System,

troubleshooting, and replacing hardware

Product Documentation Library

Documentation and resources for this product and related products are available at http://www.

oracle.com/goto/S7-2/docs.

Feedback

Provide feedback about this documentation at http://www.oracle.com/goto/docfeedback.

Using This Documentation 7

8 SPARC S7-2 Server Installation Guide • July 2016

Understanding the Server

These topics list the installation tasks, provide an overview of the server, and highlight the key

components.

■

“Conceptual Overview” on page 9

■

“Installation Task Overview” on page 10

■

“Server Overview” on page 11

■

“Front Panel Components (Installation)” on page 12

■

“Rear Panel Components (Installation)” on page 13

Related Information

■

“Installing the Server” on page 25

■

“Cabling the Server” on page 51

■

“Powering On the Server for the First Time” on page 57

Conceptual Overview

The SPARC S7-2 servers provide enterprise class performance and Software in Silicon features

in significantly lower-cost form factors. Newly designed microprocessors and hardware

provides high level of system integration, excellent throughput, low memory latency, and high

bandwidth IO interconnect. These servers deliver uncompromising price and performance for

horizontal scale database, middleware, and cloud computing workloads.

Oracle Software in Silicon Features

The microprocessors for the SPARC S7 series servers offer co-engineered hardware and

software capabilities that enable applications to run with the highest levels of security,

reliability, and speed. This functionality is called Oracle Software in Silicon. These features

Understanding the Server 9

Installation Task Overview

include: Silicon Secured Memory – These APIs can be used, for example, to enable the

detection of memory corruption issues, thereby enhancing applications data integrity (ADI)

when an application uses its own custom memory allocator. With this feature enabled, an

error is likely to be raised if an application tries to access memory to which it should not have

access. For more information, refer to the adi(3C), adi(2), memcntl(2), mmap(2), and siginfo

(3HEAD) man pages.

Data Analytics Accelerator (DAX) – Coprocessors perform query-related operations directly

through the hardware, which improves Oracle Database performance. You can use DAX

hardware acceleration for Oracle Database 12c in-memory database operations. For more

information about Oracle Software in Silicon functionality, refer to: https://www.oracle.

com/servers/sparc/software-in-silicon.html. For more details on ADI, refer to the Oracle

Solaris 11.3 documentation. To use DAX, you must configure the Oracle Database 12c in-

memory feature. For instructions, refer to “Using the In-Memory Column Store” at: http://

docs.oracle.com/database/121/ADMIN/memory.htm#ADMIN14257

Related Information

■

“Server Overview” on page 11

Installation Task Overview

Steps Description Links

1. Review the SPARC S7-2 Server Product Notes for any late-

breaking news about the server.

SPARC S7-2 Server Product Notes

2. Review the server features, specifications, and site requirements. “Server Overview” on page 11

“Confirming Specifications” on page 15

3. Confirm that you received all of the items you ordered. “Shipping Kit” on page 21

4. Learn the server features, controls, and LEDs required for

installation.

“Front Panel Components (Installation)” on page 12

“Rear Panel Components (Installation)” on page 13

5. Take safety and ESD precautions and assemble the required

tools.

“Handling Precautions” on page 22

“ESD Precautions” on page 23

“Tools Needed for Installation” on page 23

6. Install any optional components into the server. “Optional Components” on page 26

7. Install the server into a rack. “Installing the Server” on page 25

8. Attach data and management cables to the server. “Cabling the Server” on page 51

10 SPARC S7-2 Server Installation Guide • July 2016

Server Overview

Steps Description Links

9. Connect the power cords to the server, configure the Oracle

ILOM on the SP, power on the server for the first time, and set

up the operating system.

“Powering On the Server for the First Time” on page 57

Related Information

■

SPARC S7-2 Server Product Notes

■

SPARC S7-2 Server Safety and Compliance Guide

■

Servers Administration

■

Server Service

Server Overview

This topic provides a high-level introduction to the main components and capabilities of the

server.

Component Description

Chassis Rack-mountable server.

CPU One or two processors are supported: 8-core, 4.267GHz, 130W each, installed on the

motherboard assembly.

Memory 16 DDR4 DIMM slots are supported:

■ Each processor module supports either 4 or 8 DIMMs for a total of 8 or 16 DIMMs in two

processor systems.

■ Mixing of memory types or sizes is not supported.

I/O expansion Three low profiles x8 PCIe Gen3 slots. All slots support x8 PCIe cards, two slots support x16

PCIe cards mechanically.

Storage devices For internal storage, the server provides:

■ Eight 2.5-inch drive bays accessible through the front panel, support SFF SAS/SATA

drives with 4 slots NVMe enabled.

■ Internal SAS HBA card.

■ Support for non-RAID LSISAS3008 HBA.

USB ports Two external USB 2.0 ports (front panel).

Ethernet ports Four 10GbE 100/1000/10000 Mbps, RJ-45-based ports on the rear panel.

Power supplies Two hot-swappable A266 1.2kW (N+1).

Cooling fans Four hot-swappable, redundant fans at chassis front (top-loading).

SP Oracle Integrated Lights Out Manager (Oracle ILOM) on motherboard.

Understanding the Server 11

Front Panel Components (Installation)

Related Information

■

Server Service

■

Oracle ILOM documentation

■

“Front Panel Components (Installation)” on page 12

■

“Rear Panel Components (Installation)” on page 13

Front Panel Components (Installation)

No. Description No. Description

1 Serial number 10 Server Overtemp LED (amber)

2 Locator LED (white) 11 Drive 0 (HDD/SDD)

3 Two USB 2.0 connectors 12 Drive 1 (HDD/SDD)

12 SPARC S7-2 Server Installation Guide • July 2016

Rear Panel Components (Installation)

No. Description No. Description

4 Service Action Required LED

(amber)

13 Drive 2 (HDD/SDD) or NVMe 0

5 Power/OK LED (green) 14 Drive 3 (HDD/SDD) or NVMe 1

6 Power button 15 Drive 4 (HDD/SDD) or NVMe 2

7 SP OK/Fault LED (green or

amber)

16 Drive 5 (HDD/SDD) or NVMe 3

8 Fan Service Action Required LED

(amber)

17 Drive 6 (HDD/SDD)

9 PS Service Action Required LED

(amber)

18 Drive 7 (HDD/SDD)

Related Information

■

“Server Overview” on page 11

■

“Rear Panel Components (Installation)” on page 13

Rear Panel Components (Installation)

Note - You must follow the proper sequence when connecting cables to the server. Do not

connect the power cords until all data cables have been connected.

No. Description No. Description

1 Power supply 0 Fault LED 8 NET 0 100/1000/10000 port

2 Power supply 0 OK LED 9 NET 1 100/1000/10000 port

Understanding the Server 13

Rear Panel Components (Installation)

No. Description No. Description

3 Power supply 1 Fault LED 10 NET 2 100/1000/10000 port

4 Power supply 1 OK LED 11 NET 3 100/1000/10000 port

5 PCIe card slot 1 12 NET MGT port

6 PCIe card slot 2 13 SER MGT/RJ-45 serial port

7 PCIe card slot 3

Related Information

■

“Front Panel Components (Installation)” on page 12

■

“Rear Cable Connections and Ports” on page 51

■

“Connect Server Cables” on page 55

■

“Install the Cable Management Arm” on page 39

14 SPARC S7-2 Server Installation Guide • July 2016

Confirming Specifications

These topics provide the technical information and airflow precautions you need to install the

server.

■

“Physical Specifications” on page 15

■

“Electrical Specifications” on page 16

■

“Environmental Specifications” on page 17

■

“Airflow Precautions” on page 18

Related Information

■

“Server Overview” on page 11

■

“Shipping Kit” on page 21

Physical Specifications

Description U.S. Metric

Height 1.68 in. 4.26 cm

Width 17.185 in. 43.65 cm

Depth 29 in. 73.7 cm

Weight (without rackmount kit) 43 lb 19.5 kg

Minimum service clearance (front) 36 in. 91.44 cm

Minimum service clearance (rear) 36 in. 91.44 cm

Minimum airflow clearance (front) 2 in. 5.08 cm

Minimum airflow clearance (rear) 3 in. 7.62 cm

Related Information

■

“Server Overview” on page 11

Confirming Specifications 15

Electrical Specifications

■

“Handling Precautions” on page 22

■

“Installing the Server” on page 25

■

“Electrical Specifications” on page 16

■

“Environmental Specifications” on page 17

■

“Airflow Precautions” on page 18

Electrical Specifications

Description Value

Operating Input Range 100 to 120 VAC; 200 to 240 VAC; 50-60 Hz

Max Operating Input Current per cord at 100VAC 8.6 A

Max Operating Input Current per cord at 200VAC 4.1 A

Max operating input power at 100VAC 851 W

Max operating input power at 200VAC 819 W

Maximum heat dissipation 2904 BTU/hr

3064 KJ/hr

Maximum standby power 23.4 W

Maximum server configuration specification under nominal temperature and voltage conditions

(SPARC S7-2, Two 4.267GHz S7 Processors, 16 64GB DDR4 DIMMS, 4 SAS + 4 NVMe-SFF drives , 1 Internal HBA card, 3 PCIe cards)

Idle AC input power 412 W

Peak AC input power running MGRID 749 W

Minimum server configuration specification under nominal temperature and voltage conditions

(SPARC S7-2-1S, One 4.267GHz S7 Processors, 4 16GB DDR4 DIMMS, 0 drives, 1 Internal HBA card, 0 PCIe cards)

Idle AC input power 190 W

Peak AC input power running MGRID 352 W

For information on power specifications, use the power calculator at:

http://www.oracle.com/us/products/servers-storage/sun-power-calculators

Related Information

■

“Powering On the Server for the First Time” on page 57

16 SPARC S7-2 Server Installation Guide • July 2016

Environmental Specifications

■

“Physical Specifications” on page 15

■

“Environmental Specifications” on page 17

■

“Airflow Precautions” on page 18

Environmental Specifications

TABLE 1

Temperature, Humidity, Acoustic, and Elevation Specifications

Specification Operating Nonoperating

Ambient temperature ■ Maximum range: 41°F to 95°F (5°C to 35°C) up to 2,953

feet (900 meters)

■ Optimal: 69.8°F to 73.4°F (21°C to 23°C)

Note - Maximum ambient operating temperature is derated by

1 degree C per 300 meters of elevation beyond 900 meters, up

to a maximum altitude of 3,000 meters.

–40°F to 154°F (–40°C to 68°C)

Relative humidity ■ 10% to 90% noncondensing, short term 23°F to 113°F (–

5°C to 55°C)

■ 5% to 90% noncondensing, but not to exceed 0.024 kg of

water per kg of dry air (0.053 lbs water/2.205 lbs dry air)

Up to 93% noncondensing 95°F (35°C)

maximum wet bulb

Altitude Up to 9,840 feet (3,000 meters)

Note - In China markets, regulations may limit installations to

a maximum altitude of 6,562 feet (2,000 meters).

Maximum 39,370 feet (12,000 meters)

Acoustic noise ■ Maximum condition: 7.1 Bels A weighted

■ Idle condition: 7.0 Bels A weighted

Not applicable

TABLE 2

Shock and Vibration Specifications

Description Operating Nonoperating

Shock 3.5 Gs, 11 ms half-sine Roll-off: 1.25-inch roll-off free fall, front to back

rolling directions

Threshold: 13-mm threshold height at 0.65 m/s

impact velocity

Vibration 0.15 G (z-axis),

0.10 G (x-, y-axes), 5-

500Hz swept sine

0.5 G (z-axis),

0.25 G (x-, y-axes), 5-500Hz swept sine

Related Information

■

SPARC S7-2 Server Safety and Compliance Guide

Confirming Specifications 17

Airflow Precautions

■

“Physical Specifications” on page 15

■

“Electrical Specifications” on page 16

■

“Environmental Specifications” on page 17

■

“Airflow Precautions” on page 18

Airflow Precautions

Caution - Proper airflow is essential for keeping the server's internal temperatures within a safe

operating range.

Air flows from the front to the rear of the server.

Follow these guidelines to ensure unrestricted airflow in the server:

■

Adhere to the minimum airflow clearance specifications. See “Physical

Specifications” on page 15.

■

Install the server so that the front faces the cool aisle and the rear faces the warm aisle.

■

Do not direct warm air into the server.

■

Prevent recirculation of air within a rack or cabinet.

■

When servicing server internal components, ensure that air ducts, baffles, and filler panels

are properly installed.

■

Route cables so that they do not interfere with airflow.

Related Information

■

“Rack Cautions” on page 27

■

“Physical Specifications” on page 15

18 SPARC S7-2 Server Installation Guide • July 2016

Airflow Precautions

■

“Electrical Specifications” on page 16

■

“Environmental Specifications” on page 17

Confirming Specifications 19

20 SPARC S7-2 Server Installation Guide • July 2016

La page charge ...

Oracle Netra SPARC S7-2 Guide d'installation

Oracle Netra SPARC S7-2 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents