Govee H614E1A1 Manuel utilisateur

Marque
Govee
Modèle
H614E1A1
Taper
Manuel utilisateur

Ce manuel convient également à

Read and follow all the safety instructions:
●
●
●
●
●
●
●
●
●
●
●
Installing Your Device
Pairing Your Device with the Govee
Home App
Unpack the box and check all items listed in the packing list.
Power on the strip lights and check whether they lights up.
❶
❷
Before You Install
What You Need
Installing Steps
❶Wipe the surface to make
sure it's clean and dry.
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n
bands. 5GHz is not supported.
A smartphone or tablet running iOS or Android. Controlling the Device with Your
Voice
❶
❷
❸
Open the Govee Home app, then tap the device icon to
enter details page.
Tap the settings icon in the top right corner.
Select Using Guidance and the onscreen instructions to
control the device using your voice.
❷Peel off the protective film
on the tape, stick the strip
on and press over it firmly.
❸Reinforce via clips around
corners.
❹Peel off the protective film
on the control box and stick
it on.
❺Power on the strip lights
and start using.
Pairing Instructions
❶
❷
❸
❹
Download the Govee Home app from the App Store (iOS
devices) or Google Play (Android devices).
Turn on Bluetooth on your smartphone.
Open the app, tap the “+” icon in the top right corner and
search for “H614E”.
Tap the device icon and follow the on-screen instructions to
complete pairing.
Govee Home
Troubleshooting
❶The adhesive tape is not strong enough.
Length
Light Color
Water Resistance
Control Method
Power Supply
30(15m-2Rolls)/100ft(50ft-2Rolls)
RGB
NO
App, Control Box, Voice Control
Adapter 12V
Specifications
Make sure the installation surface is clean and dry.
Firmly press over the strip after sticking.
Reinforce the installation via more clips and tape.
❷Cannot connect to Bluetooth.
Do not skip Bluetooth connection in the app.
Ensure Bluetooth on your smartphone has been turned on.
Your smartphone may be incompatible with the Govee
Home app. Try using a different smartphone then
reconnect.
01 02 03 04 05 06
Power the strip lights and your smartphone Bluetooth off
then on, then try again.
Ensure that your smartphone is within 1m/3.28ft of the
strip lights when connecting.
Clear any obstructions that are between the strip lights
and your smartphone.
❺Cannot connect to Wi-Fi.
Do not skip the Wi-Fi connecting steps in the app.
5GHz network is not supported. Please set the router to
2.4GHz and then reset it.
Connect your phone to Wi-Fi and check whether the
network works well.
Make sure you have entered the correct Wi-Fi name and
password.
Change your Wi-Fi password to a brief one. 8 numbers
and letters are suggested.
Connect your smartphone hotspot to the strip lights and
check whether the router works with the strip lights
❻Cannot connect to Alexa.
Unplug every connective part of the strip lights then
firmly reconnect them.
Reset your smartphone Wi-Fi.
Unplug the adapter port then replug it.
❹Cannot sync the strip lights to the beat of my music.
Move the control box closer to the music source.
Clean the mic on the control box then try again.
❸The strip lights do not display the full selected color/Some
LED beads do not light up.
Please contact the Govee support team for rapid product
replacement.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
Official Website: www.govee.com
@Govee.smarthome@Goveeofficial
@govee.official
@govee_official
@Govee
www.govee.com
For FAQs and more information,
please visit: Model: H614E
User Manual
FCC and ISED Canada Statement
1.
2.
3.
4.
This device complies with Part 15 of the FCC Rules and Industry
Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélec
trique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-005.
Cet appareil numérique de la classe B est conforme à la norme NMB-005
du Canada.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION :
RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES CONFORMÉMENT AUX
1.Do not connect the rope light to the supply while it is in the packing
or wound onto a reel;
2.Do not use the rope light when covered or recessed into a surface;
3.Do not open or cut the rope light
This device uses a non-replaceable light source. When the light source
reaches the end of its life cycle, this device should be replaced.
Not intended for illumination. Only used for creating ambiance.
FCC and IC Radiation Exposure
Statement
This equipment complies with FCC and IC radiation exposure
limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm
between the radiator & your body.
la distance entre l'utilisation et l'appareil ne doit pas être
inférieure à 20 cm.
FOR INDOOR USE ONLY
POUR UNE UTILISATION EN INTÉRIEUR UNIQUEMENT
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: [email protected]
Contact information: https://www.govee.com/support
Govee is a trademark of Shenzhen Intellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co., Ltd. All Rights Reserved.
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech.
Co., Ltd. is under license.
®
07 08
  • Page 1 1
  • Page 2 2

Govee H614E1A1 Manuel utilisateur

Marque
Govee
Modèle
H614E1A1
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents