Search for “Ring” in one of
the app stores below, or visit
ring.com/app
Set up your Indoor Cam in
the Ring app.
In the Ring app, select Set
Up a Device.
When prompted, select
Security Cams and follow
the in-app instructions.
Blue light flashing?
If the light on the front of
your Indoor Cam is flashing
after setup, it’s updating
its software.
Do not unplug your Indoor
Cam while the light is flashing!
Install your Indoor Cam.
Indoor Cam is happy just
about anywhere inside. It
comes ready to sit on a flat
surface like a table or shelf,
but can also be mounted
to a wall or ceiling.
Choose a spot where it can
provide the view you want,
within reach of a power outlet.
How to install Indoor Cam on
a table of shelf:
It’s all ready, already! Place it
at your chosen location, then
plug it in. Your Indoor Cam is
now ready to protect you.
Once you’re done, check out
the live video in the Ring app
to make sure you have the
view you want.
How to install Indoor Cam
on a wall:
Remove the base. Unscrew it
using a standard Phillips-head
screwdriver (not included).
Re-attach the base. Screw it
into the back of your Indoor
Cam with the “UP” arrow on
the bracket pointing upwards.
Remove the mounting
bracket. Slide it down. It’ll
come right o the base.
Drive the screws. Hold the
plate against your wall,
making sure the “UP” arrow
is pointing up, and mount it
with the included screws.
Quick Start Mount your Cam. Guide the
grooves in the base onto the
hooks on the bracket. Slide
Indoor Cam down to secure
it to the wall.
Adjust the view. Now check
out the live video in the Ring
app to make sure you have
the view you want.
Plug it in. Once secure, plug
the power cord into your
Indoor Cam, then plug the
adapter into a power outlet.
How to install Indoor Cam
on a ceiling:
Remove the mounting
bracket. Slide it down. It’ll
come right o the base.
Drive the screws. Hold the
plate against your ceiling,
and mount it with the
included screws.
QR
23456789
User Guide
Indoor Cam
Power it up.
First, plug the included
power cable into the back of
your Indoor Cam.
Then, plug the power supply
into an outlet.
1. Open the Ring app and
select Set Up a Device.
Then follow the in-app
instructions.
2. Scan this code.
This identifies your Ring
device to make setup fast
and easy.
Download the Ring App.
The Ring App walks you
through setting up and
managing your Ring Cam.
Adjust the view. In the Ring
App, select your Indoor Cam,
then go to Device Settings,
select Video Settings, and
tap Rotate Video.
Now check out the live video
in the Ring app to make sure
you have the view you want.
Mount your Cam. Guide the
grooves in the base onto the
hooks on the bracket. Slide
Indoor Cam down to secure
it to the ceiling.
Plug it in. Once secure, plug
the power cord into your
Indoor Cam, then plug the
adapter into a power outlet.
10 11 12 13
Review, share and download.
Your new device comes with
a free 30-day trial of our Ring
Protect video recording service.
To continue your subscription
and save your videos, please
visit ring.com/protect-plans
What is Ring Protect?
Ring Protect is a subscription
service that stores videos
from your Ring devices.
Why do I want it?
Ring lets you interact with
visitors and monitor your
property in real time, while
Ring Protect allows you
review and share those
videos anytime.
How much does it cost?
Ring Protect starts at $3
USD/month or $30 USD/year
per Ring doorbell or camera.*
How do I sign up?
Simply log into your Ring
account at ring.com/protect-
plans, and follow the on-
screen instructions.
*$4 AUD, $4.50 NZD, $5 CAD per month or
$40 AUD, $45 NZD, $50 CAD per year
IMPORTANT PRODUCT INFORMATION
Safety and Compliance Information
Use Responsibly. Read all instructions and safety
information before use.
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS
COULD RESULT IN FIRE, ELECTRIC SHOCK, OR
OTHER INJURY OR DAMAGE
Ring Indoor Cam and its accessories are for
indoor use only.
Do not expose your device or adapter to liquids. If
your device or adapter gets wet, carefully unplug
all cables without getting your hands wet and
wait for the device and adapter to dry completely
before plugging them in again. Do not attempt
to dry your device or adapter with an external
heat source, such as a microwave oven or a hair
dryer. If the device or adapter appear damaged,
discontinue use immediately. Use only accessories
supplied with the device to power your device.
To avoid risk of electric shock, do not touch your
device or any wires connected to your device
during a lightning storm.
PRODUCT SPECIFICATIONS
Model Number: 8SN1S9
Electrical Rating: 100-240 VAC, 50/60 Hz
(using included power supply)
Operating Temperature: 23°F to 113°F
(-5°C to 45°C)
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic
devices is regulated. Make sure you dispose of,
or recycle, your device in accordance with your
local laws and regulations. For information
about recycling your device, go to amazon.com/
devicesupport.
TERMS OF SERVICE AND WARRANTY
Use of the product is subject to your registration
with Ring and your agreement with the Terms of
Service found at ring.com/terms. To review your
warranty coverage, please refer to the enclosure
inside this box or visit ring.com/warranty.
FOR USERS IN THE
UNITED STATES
FCC Compliance Statement (for products subject
to Part 15)
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver. Connect the equipment into an
outlet on a circuit dierent from that to which
the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes
or modifications to a Product by the user that are
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment. The device meets the FCC
Radio Frequency Emission Guidelines. Information
on the product is on file with the FCC and can be
found by inputting such Product’s FCC ID (which
can be found on the device) into the FCC ID Search
form available at fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is Ring
LLC, 1523 26th Street Santa Monica, CA 90404.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment and
it also complies with Part 15 of the FCC RF Rules.
For information on our warranty, theft
protection, and Ring Protect Plans, see
ring.com/legal
© 2021 Ring LLC or its aliates.
Ring and all related marks are trademarks
of Ring LLC or its aliates.
For additional help, visit
ring.com/help
Or give us a call
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide +1 310 929 7085
For a list of all our customer
support numbers, visit
ring.com/callus
This equipment must be installed and operated in
accordance with provided instructions and the
antenna(s) used for this transmitter must be
installed to provide a separation distance of at
least 20 cm from all persons and must not be
co-located or operating in conjunction with any
other antenna or transmitter.
FOR USERS IN CANADA
Innovation, Science and Economic
Development
Canada (ISED) Compliance
This device contains license-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science
and Economic Development Canada’s license-
exempt RSS(s). Operation is subject to the
following two conditions: (1) This device may not
cause interference; and (2) This device must
accept any interference, including interference
that may cause undesired operation of the device.
Information Regarding Exposure to Radio
Frequency Energy
This equipment complies with IC RSS-102 RF
exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated
with a minimum distance of 20 cm between the
radiator and your body.
Conformité Innovation Sciences et
Développement Économique Canada (ISDE)
L’émetteur/récepteur exempt de licence contenu
dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage ;
et (2) l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Informations concernant l’exposition aux
radiofréquences
Renseignements relatifs l’exposition l’énergie
des radiofréquences Cet équipement est con-
forme aux limites d’exposition IC CNR-102
prévues pour environnements non contrôlés.
Cet équipement doit être installé et utilisé avec
un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
CAN ICES-3 (B)/NMB-3(B)
-
1
-
2
dans d''autres langues
- English: Support Ring User manual
Autres documents
-
Ring 2-Pack Indoor Cam Manuel utilisateur
-
Ring 169AGBS Mode d'emploi
-
Ring BHAXN001 Mode d'emploi
-
Ring RBWP001 Manuel utilisateur
-
Ring 5B21S8-BEN0 Manuel utilisateur
-
Ring Smart Lighting Bridge App Mode d'emploi
-
Ring 169MAILBXB Mode d'emploi
-
Ring SF49E9 Mode d'emploi
-
Ring 5C28S6 TPUB Alarm Bear Glass Break Sensor Manuel utilisateur
-
Ring Video Doorbell (2nd Generation) Manuel utilisateur