Wyze WVDB1A Mode d'emploi

WVDB1A
Wyze
Marque
Wyze
Modèle
WVDB1A
Taper
Mode d'emploi
SETUP
Download the Wyze app and sign in or create an
account. Follow the instructions in the Wyze app to
finish installation
1
Open the Wyze app and Tap the + plus sign on the top left of the
Home screen. Tap "Add Device" and then select Wyze Video Doorbell
*Detailed installation steps are available in the Wyze app.
2
Fill-in Light
Doorbell
Button
Lens
Microphone Reset Button
Doorbell Back
Doorbell Front
Reset
IN THE BOX
Wyze Video Doorbell × 1
Wyze Chime × 1
Wall Plate × 1
Wedge × 1
Wiring Cap × 4
Fuse × 1
Extension Wires × 2
Screw Assembly × 1
Quick Start Guide × 1
Wedge
Wall Plate Extension Wires Fuse
Turn o power
while wiring.
Wyze Chime
Setup Button
Status Light
Speaker
LIGHT INDICATIONS
FCC WARNING:
WYZE VIDEO DOORBELL
WYZE CHIME
FCC RADIATION EXPOSURE STATEMENT:
INSTALLATION
Add Wyze Chime, select continue adding filters. Follow the
instructions in the Wyze app to finish installation.
Select "Add Later". You can add a Wyze Chime device by selecting
"Device Settings" and tapping "Extended Devices".
Any change or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunc-
tion with any other antenna or transmitter.
3
Installing with the wedge
Installing without the wedge
Wyze Video Doorbell Wyze Chime
Flashing yellow/blue light
Connecting to router
Flashing blue light
Connecting to external network
Flashing yellow light
Waiting for connection
Solid yellow light
The device is powered
Solid white light
Connected
Solid blue light
Connected
Flashing blue light
Connecting to network
Solid yellow light
The device is powered
Plug the Wyze Chime
into an outlet.
NEED HELP?
Scan the QR code
to learn more
Contact our support wizards:
https://support.wyze.com
Resources & Support
support.wyze.com
DOWNLOAD THE APP BY
SCANNING THIS QR CODE
OR DOWNLOAD DIRECTLY FROM THE
APPLE APP STORE OR GOOGLE PLAY
1
FCC STATEMENT
Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encour-
aged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.-- Increase the separa-
tion between theequipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ISEDC RSS WARNING
This device complies with ISEDC licence-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interfer-
ence,including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'ISEDC applicables aux
appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
Any Changes or modifications not expressly approved by the party
responsible for compliance
could void the user’ s authority to operate the equipment.
may not cause interference, and (2) this device must accept any inter-
ference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'ISEDC applicables aux
appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire d'interférence, et (2) l'appareil doit
accepter tout interférence radioélectrique subi, même si l'interférence
est susceptible d'en compromettre le fonctionnement.
This device complies with ISEDC licence-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device
This equipment complies with ISEDC RF radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Cet appareil est conforme aux limites d'exposition de rayonnement RF
ISEDC établies pour un environnement non contrôlé.
Cet émetteur ne doit pas être co-implanté ou fonctionner en
conjonction avec toute autre antenne ou transmetteur.
Cet équipement doit être installé et utilisé avec une distance minimale
de 20cm entre le radiateur & votre corps.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment. Tous changements ou modifications non expressement
approuvé par la partie responsable de la comformité peut annuler
l'authorite de l'utilisateur a opérer l'équipement.
ISEDC RSS WARNING
ISEDC RADIATION EXPOSURE STATEMENT:
  • Page 1 1

Wyze WVDB1A Mode d'emploi

WVDB1A
Wyze
Marque
Wyze
Modèle
WVDB1A
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents