HelloBaby HB6081 2.4GHz Digital Wireless Video Baby Monitor Manuel utilisateur

Marque: HelloBaby

Modèle: HB6081 2.4GHz Digital Wireless Video Baby Monitor

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

HB6081说明书 (hellobaby)

说明书为折叠式

尺寸：630*120MM

材质：100g双胶纸（彩色）

版本：V1.1

类型：环保

设计

审核

审批

王勇

2023/06/19

Ver: 1.0

版本修改内容

日期

文件首发。 2023/01/03

11. MAINTENANCE

* Clean your baby monitor with a slightly damp or anti-static cloth.

* Never use cleaning agents or solvents.

12. DISPOSAL GUIDE FOR BATTERY AND PRODUCT

* Do not attempt to repair or adjust any of the electrical or mechanical functions of the

unit;

* Remember to dispose of the product in an environmentally responsible way;

* For proper collection and processing of these products, take them to the collection

points designated by local authorities. You can also contact the store where you

purchased the product.

Improper or incorrect use of batteries may cause corrosion or battery leakage, which

could cause personal injury or damage to property. Use only the types of the batteries

which are indicated in this manual.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45 degree C or Incinerate.

Follow Manufacturer's Instructions.

- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,

that can result in an explosion;

- Leaving a battery in an extremely high temperature surrounding environment that can

result in an explosion or the leakage of flammable liquid or gas;

- A battery subjected to extremely low air pressure that may result in an explosion or the

leakage of flammable liquid or gas.

- The battery shall not be exposed to excessive heat such as sunshine, fire or the like;

FCC& ISDE Statement

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt

RSS standard(s).Operation is subject to the following two conditions: (1)this device may not

cause harmful interference, and (2)this device must accept any interference received,

including interference that may cause undesired operation. Cet appareil est conforme à la

partie 15 des règles de la FCC et aux normes RSS exemptées de licence d’Industrie Canada. Le

fonctionnement est soumis aux deuxconditions suivantes : (1)cet appareil ne doit pas causer

d’interférences nuisibles, et (2)cet appareil doit accepter toute interférence reçue, y compris

les interferences pouvant entraîner un fonctionnement indés.

Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates,uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

Audio feedback

(high pitched noise)

Interference or poor

reception

* Move the monitor close to the camera;

* The camera or monitor may be placed too close to many metal objects;

* Other electronic devices may be interfering with the signal;

* The battery power may be too low;

* The camera and monitor may be placed too closed;

* The volume on the monitor may be set too high;

Frozen picture on

screen

* Repower the baby unit (plug out the adapter, then plug it into the

socket again);

* Press the RESET key at the back of parent unit

No reception on the

monitor

* The power adapters may not be properly connected;

* Conﬁrm that the camera and monitor are ON;

* Camera may be far away from the monitor;

* Camera and monitor may not be properly paired; follow PAIRING instrucons;

10. TROU B LE SHOOTING

3. Press the MEN U Key . The sub-menu Settings will pop up.

4. Press◀/▶/▲/▼ toselectdefault settings , press the MANU key to enter.

5. Select icon to restore default setting; Select icon to cancel the default setting;

 6. Press the Return Key one time to exit sub-menu , and two times exit main menu.

8.8.2 ALARM VOULME S ET T ING

1.Press MEN U Key, the Main Menu will pop up.

2. Press the◀/▶/▲/▼ keyuntiltheSettingiconisselected.

3. Press the MEN U Key . The sub-menu Settings will pop up.

4. Press◀/▶/▲/▼ toselectdefault settings , press the MANU key to enter.

5. Select icon to restore default setting; Select icon to cancel the default setting;

 6. Press the Return Key one time to exit sub-menu, and two times exit main menu.

8.8.2 ALARM VOULME S ET T ING

1.Press MEN U Key, the Main Menu will pop up.

2. Press the◀/▶/▲/▼ keyuntiltheSettingiconisselected.

3. Press the MEN U Key .The sub-menu Settings will pop up.

4. Press◀/▶/▲/▼ toselect AL AR M .

5. Select volume increase icon , press MANU key to incress the alarm volume.

6. Select volume decrease icon , press MANU key to decrease the alarm volume.

7. Press the Return Key one time to exit sub-menu, and two times exit main menu.

8.8.3 CONTAC T

1.Press MEN U Key, the Main Menu will pop up.

2. Press the◀/▶/▲/▼ keyuntiltheSettingiconisselected.

3. Press the MEN U Key .The sub-menu Settings will pop up.

4. Press◀/▶/▲/▼ to select Contact .

5. Press MAN U key . You can see our brand HelloBaby, our Email address and Website.

6. Press the Return Key one time to exit sub-menu, and two times exit main menu.

8.8.4 DAT E/T IME SETTIN G

1.Press MEN U Key, the Main Menu will pop up.

2. Press the◀/▶/▲/▼ keyuntiltheSettingiconisselected.

3. Press the MEN U Key . The sub-menu Settings will pop up.

4. Press◀/▶/▲/▼ key until the time icon is selected .

5. Press◀/▶key to select Month, Day and Yearsetting; Press▲/▼ key to set your desired

month, date and year.

6. Press the◀/▶key to select the timing method 12H or 24H.

7. Press ◀/▶key to select Hour, Minute setting; Press▲/▼ key to set your desired hour

and Minute.

8. Press the Return Key one time to exit sub-menu, and two times exit main menu.

8.8.5 DISPLAY R E VERSE

1.Press MEN U Key, the Main Menu will pop up.

2. Press the◀/▶/▲/▼ keyuntiltheSettingiconisselected.

3. Press the MEN U Key . The sub-menu Settings will pop up.

4. Press◀/▶/▲/▼ key to select Disply Reverse .

5. Press MAN U key to open Display Reverse or close Display Reverse .

Made in China

9. TEC H N ICAL DATA

Operation

environment

Battery (Parent Unit)

Operating time

Li-ion 3.7V 4000mAh (14.8Wh)

Up to 10 hours

RelativeHumidity:15%-85%

Maximum power <19dBm

Operation Temperature: +32F~+104F (0℃~40℃)

Battery Charging Temperature: +50F~+104F(10℃~40℃)

2412MHz-2462MHz

Frequency

Power Adapter

Parent Unit: Input: 100-240VAC 50/60Hz

Output: 5V DC 1.2A

Camera Unit: Input: 100-240VAC 50/60Hz

Output: 5V DC 1.2A

Up to 1000ft (300m) outdoor (line of sight)

Up to 165ft (50m) indoor

Operating Range

Display 5.5" 720P TFT LCD

encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-- Consult the dealer or an experienced radio/T V technician for help.

This device meets the exemption from the routine evaluation limits in section 2.5 of R SS 102

and compliance with RS S 102 RF exposure, users can obtain Canadian information on RF

exposure and compliance.

cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5

du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir

des données canadiennes sur l'exposition aux champs rf et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled

environment.

Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies

pour un environnement non contrôlé.

Radiation Exposure Statement for camera

This equipment should be installed and operated with minimum distance 20cm between the

radiator & your body.

Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le

radiateur et votre corps.

SA R Statement for Monitor

Specific Absorption Rate (S AR) information:

This Monitor meets the government's requirements for exposure to radio waves. The

guidelines are based on standards that were developed by independent scientific

organizations through periodic and thorough evaluation of scientific studies. The standards

include a substantial safety margin designed to assure the safety of all persons regardless of

age or health. ISED & FCC RF Exposure Information and Statement the SA R limit of

Canada(ISED & FC C) is 1.6 W/kg averaged over one gram of tissue. Device types: Monitor

has also been tested against this SA R limit. This device was tested for typical body-worn

operations with the back of the Monitor kept 0mm from the body. To maintain compliance

with ISED RF exposure requirements, use accessories that maintain an 0mm separation

distance between the user's body and the back of the Monitor . The use of belt clips, holsters

and similar accessories should not contain metallic components in its assembly. The use of

accessories that do not satisfy these requirements may not comply with I SED RF exposure

requirements, and should be avoided.

Informations sur le débit d'absorption spécifique (DAS):

Cette Moniteur répond aux exigences du gouvernement en matière d'exposition aux ondes

radio. Les lignes directrices sont basées sur des normes élaborées par des organisations

scientifiques indépendantes à travers une évaluation périodique et approfondie des études

scientifiques. Les normes comprennent une marge de sécurité substantielle conçue pour

assurer la sécurité de toutes les personnes, quel que soit leur âge ou leur état de santé.

Information et déclaration d'I S D E sur l'exposition aux RF la limite DAS du Canada (IS D E) est

de 1,6 W / kg en moyenne sur un gramme de tissu. Types d'appareils: la Moniteur a

également été testée par rapport à cette limite SAR. Cet appareil a été testé pour des

opérations typiques portées sur le corps avec le dos de la Moniteur gardé à 0 mm du corps.

Pour maintenir la conformité avec les exigences d'exposition RF d'I S D E, utilisez des

accessoires qui maintiennent une distance de séparation de 0 mm entre le corps de

l'utilisateur et l'arrière de la Moniteur. L'utilisation de clips de ceinture, d'étuis et

d'accessoires similaires ne doit pas contenir de composants métalliques dans son

assemblage. L'utilisation d'accessoires qui ne satisfont pas à ces exigences peut ne pas être

conforme aux exigences d'exposition aux R F d'I SDE et doit être évitée.

EU Declaration of Conformity (DOC)

Hereby, videotimes declares that the radio equipment type is in compliance with R E D

Directive 2014/53/E U.

The full text of the EU declaration of conformity is available on the website:

www.hellobaby.net.cn

Model: HB6081

Responsible Party(US): Startline LLC

Add: 22 Hazelwood Drive, Jericho, NY 11753 Tel: 1-516-681-3729

Authorized UK Representative(UK): AP E X CE SPECIALISTS LIMIT E D

Add: 89 Princess Street,M14HT,UK info@apex-ce.com

Shenzhen Videotimes Technology Co.,Ltd

Room 2106, Building 11, Tianan Yungu Phase II , Gangtou Community, Bantian Street,

Longgang District, Shenzhen, Guangdong, China

Product tested against E N62471

WARNING I R emitted from this product. Do not stare at operating lamp

Risk Group 1

Strangulation Hazard: Children have STRANGLED

in cords. Keep this cord out of the reach of children

(more than 3 ft (0.9 m) away). Do not remove this tag.

WARNING

DANGER D’ÉTRANGLEMENT: Des enfants se sont

ÉTRANGLÉS avec des cordons électriques. Garde

le cordonélectrique hors de la portée des enfants(à

plus de 0.9m/3 pi du lit d’enfant). Ne pas enlever

cette étiquette.

AVERTISSEMENT

11 12

www.hellobaby.net.cn

service@hellobaby.net.cn

YE S NO

Ver: 1.1 文件改多国语言,ECO。2023/06/19

8. MENU OP E RATION

8.1 LU L LABAY S E T T I NG

You can soothe the baby to sleep by playing a gentle lullaby from the baby unit.

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ key until the lullaby icon is selected by orange box.

3. Press the◀/▶/▲/▼ key to select one of 8 available lullabies or loop playback .

4. Press the to confirm.

5. Select stop icon to stop.

6. Press the Return Key to exit.

The lullaby default setting is OFF.Note:

8.2 CAMERA

8.21 ADD CAM E R A

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ key until the camera icon is selected by orange box.

3. Press the◀/▶/▲/▼ key until the camera adding icon is selected by orange box.

4. When the Pair sign is displayed 30 seconds countdown on the LCD screen, press PAIR

button on the back of the camera.

5. Once paired, SuccessfulpairingiconshowsontheLC Dscreen.

6. If fails, repeat above steps.

8.22 DELETE C AMERA

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ key until the camera icon is selected by orange box.

3. Press the ◀/▶/▲/▼ key until the camera deleting icon is selected by orange box.

4. Press the key, the icon and the will appear.

5. Select and press key to delete the camera.

SP LI T-SCREE N FUNC TI ON

The baby moniter has Split-Screen feature. When 2 cameras are paired, the two different

imagines will be displayed on the monitor’s screen side by side at the same time. When 3 or

4 cameras are paired, all imagines will be displayed splitly on the screen in real-time.

8.3 ENERGY SAVING

This mode allows you to control the sound activation of your baby unit. If there is no sound

around the baby unit within 30 seconds, it will stop audio transmission and turn off the

screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity

level, it will start transmitting the signal to the parent unit again and turn on the screen of the

parent unit. To change the ECO level, please follow the below instructions.

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ key until the ECO icon is selected by orange box.

3. Press the◀/▶key to select desired level.

4. Press the to confirm.

5. PresskeytoExit.

ote isLowsensitivitylevel, the baby have to make a lot of sound before the EC O N:

function is activated;

i ; Note:s Middle sensitivity level

3 4

6.2 PARENT UNIT OVERVIEW:

6. 3 BABY UNIT OVERVIEW:

7. KEY OPERATION

7.1 TURN ON/OFF

Press and hold the power key for 3 seconds to turn on/ off the Parent Unit.

7.2 TWO WAY TALK / EXIT KEY

Press and hold the key to enter two way talk mode. A microphone will be displayed

on the LCD screen. Release the key to stop.

Note: When you are in the two-way talk mode, the Parent Unit speaker is muted.

Also this key acts as exit function.

7.3. ZOOM

Press and hold key for 2S to operate zoom in / out.

7.4 VOLUME AND DISPLAY BRIGHTNESS ADJUSTMENT

1. Press the Volume and Brightness key, the volume and brightness icons will display on

the LCD screen.

2. Press the ◀/▶key to adjust the volume.

3. Press the ▲/▼ key to adjust the brightness.

4. Press the Return Key to exit.

The volume and brightness has 6 levels. The default level setting is level 4. Note:

7.5 REMOTE PAN/TILT (DIRECTION ARROW)

You can remote pan-tilt the camera.

1.Press any of direction arrow ◀/▶/▲/▼ key, the direction icons will display on the LCD

screen.

2.Press the ◀/▶keytopanthecamera.

3.Press the ▲/▼ key to tilt the camera.

4. Press the Return Key to exit.

Thank you for purchasing the HB6081 Baby Monitor. With our baby monitor, you could see

and hear your baby sleeping or playing in their room anytime.

Please retain your original dated sales receipt for your records. For warranty service of your

product, you will need to provide a copy of your dated sales receipt to confirm warranty

status. Registration is not required for warranty coverage.

Please make sure the following included in your package

Parent unit x 1 Camera unit x 1 Power Adapter x 2

User manual x 1 Wall-mounting kit x 1

1. SAF E T Y INST R UCTIOINS

CAUTION: Keep the device away from children.

Children have STRANG L ED in cords. Keep this cord out of the reach ofStrangulation Hazard:

children (more than 3ft (0.9m) away). Never use extension cords with A C Adapters. Only use

the AC Adapters provided.

This product contains small parts, please be careful when unpack and Choking hazard :

assemble the product.

All the safety and operating in structions should be read Read and keep to instructions:

before the video baby monitor is operated. This product cannot replace responsible adult

supervision.

This product is designed for indoor use only. The unit should not be Water and moisture:

exposed to rain, moisture, dripping or splashing. No objects filled with liquid should be

placed on top of, or beside the product, such as a glass or vase. This item should not be used

near water.

Use the appliance if the cord or plug is damaged. If your baby monitor is not DO N OT:

operating properly or has suffered any damage, contact “service@hellobaby.net.cn” service

center to request inspection and repair of the appliance in order to avoid any possible risk.

Do not attempt to repair or adjust any of the electrical or mechanical functions of DO N OT:

the unit. Otherwise, the guarantee will be made void.

This baby monitor should not be used on a bed, sofa, rug or similar surface that Ventilation:

may block the ventilation openings, or be placed in an enclosed area such as a bookcase or

drawer that may impede air flow.

This unit should not be exposed to direct heat sources Keep away from sources of heat:

such as a candle, radiator, heat register, stove or other appliance that emits heat. The unit

should not be left in direct sunlight.

This unit should only be used with the AC power adapters included in this Power source:

package (rated 5V DC 1.2A).

This unit should be serviced by qualified personnel only when:Damage requiring service:

. Objects have fallen or liquid has been spilled into the product.

. The units have been exposed to rain.

. The units do not appear to operate normally or exhibits a distinct change in performance.

. The units have been dropped or the enclosure damaged.

2. WARRA N T Y TERMS

We offer one-year warranty from the original purchase date against defects in workmanship

and materials. If you have warranty or support issues, please contact our after-sales service

via email.

3.INSTA L L AT I ON GUIDE L INES

* To use your parent unit and camera unit together, you have to establish a radio

link between them, and the range will be affected by environmental conditions.

* Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or

reinforced concrete between the baby and parent unit may block the radio signal.

* The signal strength may also be reduced by other solid structures, like walls, or by radio

or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent

lights or dimmer switches.

* Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth

systems, or microwave ovens, may cause interference with this product, so keep the baby

monitor away at least 5ft (1.5m) from such products, or turn them off if they cause

interferences.

4. PLAC E MENT OF T H E BABY MO N I TO R

The camera can be placed on the desktop or mounted on the wall. Don't place baby monitor

on soft quilts or blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor

away from heat sources such as radiators, chimneys, cookers and direct sunlight; Keep the

baby unit away from TV sets, microwave oven and radios. If interference occurs, move the

camera to elsewhere.

*Place the camera within6 feet (2 meters) of the area being monitored for optimum

performance.

5. GETTING S TA RTED

5.1 TURN ON T HE BABY U N IT:

1. Insert the DC plug of the power adapter into the DC jack in the rear of the Baby Unit.

2. Insert the other end of the power adapter into a suitable electrical outlet.

3. Once the adapter is connected, the power LED will light up.

.2 TURN ON T HE PA RENT UNI T: 5

.1. Insert the DC plug of the power adapter into the DC jack in the side of the Parent Unit

2.Insert the other end of the power adapter into a suitable electrical outlet.

3. Press and hold the power key 3 seconds on the back of the Parent Unit.

4.Once parent unit is on, the power LED will light upand the image will display on the LCD.

5.3 INFRARED NIGHT VISION (AUTOMATIC)

The infrared night vision function allows the camera to pick up images in dark or low

light conditions. In this mode, only black and white images will be displayed on the

m The onitor,the optimum image lie in where baby unit is 6ft (2m) away from object.

camera is in night vision mode, the icon will be displayed on the top of screen.

6. PRODUCT OVERVIEW

6. 1 ICONS OVERVIEW:

Power key

Speaker

DC-jack

Stand

Reset Key

Antenna

Charging LED / Power LED

Sound Level Indicator

5.5" 720P TFT LCD

Exit/Two Way Talk

Menu/OK

Zoom / Pan-Tilt

MIC

Right Key

Up key

Down Key

Left Key

Volume/Brightness

--------

Signal Strength

Alarm

--------

Volume

--------

Zoom

--------

Two-Way Talk

--------

Lullaby

--------

Camera

--------

Battery Level

--------

Night Vision

--------

Temperature

--------

Time

Speaker

Pair key

DC-Jack

Temperature

sensor

Antenna

ANT

DV 5 V

PAIR

Lens

Light sensor

MIC

Infrared LEDs

Power LED

Night light

Night light switch

YE S N O

YE S

is High sensitivity level, the baby don't have to make a lot of sound before the ECO Note:

function will be activate;

8.4 FEEDIN G TIME SET TIN G

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ key until the Feeding Time icon is selected by orange box.

3. Press the◀/▶/▲/▼ key to select the feeding alarm time you need.

4. Press the to confirm. The Feeding Time icon shows on the L CD screen.

The minimum setting is 0.5 hours, and the maximum setting is 7 hours (9 levels).Note 1：

The Feeding alarm default setting is OFF. Note 2：

Select icon and press to cancel feeding alarm setting. Note 3：

8.5 TEMPER AT U R E SETTING

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ key until the thermometer icon is selected by orange box.

3. Press the▲/▼ key to select the Degrees Centigrade (℃) or Degrees Fahrenheit (°F).

4. Press the ▲/▼ key to select or for turning on/off alarm function.

5. Press ▲/▼ keys to adjust the Hi limit when(red)is selected.

6. Press ▲/▼ keys to adjust the Lo limit when(blue)is selected.

7. The corresponding temperature shows on the LCD screen.

8.Press keytoExit.

The detected temperature range is 0~40 ℃.Note:

ote The high temperature alarm default setting is 36 ℃,andthelowtemperature alarmN:

defaultsettingis8℃.Whenthetemperaturegoesaboveorbelowthesettings,the

temperatureicon willdisplayonthescreen.Itwillalertuserbybeeps.Pressanykeyon

theparentunittostopbeepingandflashing.

8.6 LANGUAG E SETTIN G

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ keys until the language iconisselectedbyredbox.

3. Press key to enter into sub-menu, then press ◀/▶/▲/▼ key to select the

language you need.

4. Presskeytoconfirm.

5.Press keytoExit.

8.7 NIGHT L I GHT SETTING

1. Press the MEN U key and the menu will pop up.

2. Press the◀/▶/▲/▼ keys until the language iconisselectedbyredbox.

3. Presskey to or the night lightlight.

4.Press keytoExit.

Note: Press the night light key can also turn on or turn off the night light(Key on the side

of Baby Unit).

8.8 SETTINGS

8.8.1 DEFAULT SETTING S

1.Press MEN U Key, the Main Menu will pop up.

2. Press the◀/▶/▲/▼ keyuntiltheSettings icon is selected.

www.hellobaby.net.cn

service@hellobaby.net.cn

Ver: 1.1

2.4GHz Digital Wireless Video Baby Monitor

User Manual

The pictures are for reference only, please subject to practicality.

Model: H B6081

630.00 mm

120.00 mm

Energy Saving

EC O

2.4GHz Digital Wireless Video Baby Camera

HelloBaby HB6081 2.4GHz Digital Wireless Video Baby Monitor Manuel utilisateur

Marque: HelloBaby

Modèle: HB6081 2.4GHz Digital Wireless Video Baby Monitor

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: HelloBaby HB6081 2.4GHz Digital Wireless Video Baby Monitor User manual

HelloBaby HB6081 2.4GHz Digital Wireless Video Baby Monitor Manuel utilisateur

HelloBaby HB6081 2.4GHz Digital Wireless Video Baby Monitor Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents