BrightAI 810-00006 Manuel utilisateur

Marque
BrightAI
Modèle
810-00006
Taper
Manuel utilisateur
Pan and Tilt Laser Scanner
Warning:
Warning content……
Product Name: Scanner, Pan and Tilt
Trademark: BrightAI
Apply for business name: BrightAI
model :810-00006
1. Overview
Thank you for choosing our products!
Please carefully read this product User Guide to ensure the quick to install and use this
product.
The Laser Scanner is a semi-automated device to accurately measure and digitally
model swimming pools. This product is a custom, purpose-built opto-mechanical system
that’s controlled by Latham Measure APP.
2. Components
①iPad
②Laser Scanner
③ AR Tags X 2
④ Battery
⑤ USB-C cable
⑥ USB-C charger
⑦ Mount plate ⑧ Tripod
⑨ Screw mounting kit
3. Input
DC15V ～3A
4. Wireless
Wi-Fi:
5. Installation a) Level the Tripod
b) Mount the Mount Plate on the Johnny5
Adjust the position of the Mount Plate until the four screw holes of the Mount
Plate are aligned with the screw holes on theScanner, and then use the Screw
mounting kit to attach it.
c) Attach the Scanner with Mount Plate to the Tripod
2412-2462MHz
5180-5240MHz
5745-5825MHz
Adjust the position of the scanner with Mount Plate until the center hole of the
Mount Plate is aligned with the center hole of the Tripod.
Insert the mounting screw of the tripod into the center hole of the scanner and
tighten.
d) Connect Scanner to the USB-C Cable
e) Device Power
There are two methods to power the Scanner:: using a 15V PD capable Battery
or using a 15V PD capable USB-C Power Supply..
f) Follow the instructions in the Latham Measure app to control the Scanner.
This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique re?u,
même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems
l'appareil destiné à fonctionner dans la bande 5150–5250 MHz est destiné uniquement à une utilisation
en intérieur afin de réduire les risques de brouillage préjudiciable des systèmes mobiles par satellite à co-canal
The distance between user and products should be no less than 20cm
La distance entre l'utilisateur et les produits ne doit pas être inférieure à 20 cm
Per FCC 15.407(c) and RSS-247 issue 2 clause 6.4a,
the device will automatically discontinue transmission
in case of either absence of information to transmit or operational failure.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

BrightAI 810-00006 Manuel utilisateur

Marque
BrightAI
Modèle
810-00006
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents