Sony XBR85Z9G Manuel utilisateur

Taper
Manuel utilisateur
5-001-728-13(1)
Television
léviseur
Reference Guide
US
Manuel de référence
FR
Sony Customer Support
U.S.A.:
http://www.sony.com/tvsupport
Canada:
http://www.sony.ca/support
United States Canada
1.800.222.SONY 1.877.899.SONY
Please Do Not Return the Product to
the Store
Service à la clientèle Sony
Canada :
http://www.sony.ca/support
États-Unis :
http://www.sony.com/tvsupport
Canada États-Unis
1.877.899.SONY 1.800.222.SONY
Ne retournez pas le produit au magasin
XBR-98Z9G / 85Z9G
2
US
Table of Contents
IMPORTANT NOTICE . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . 6
Parts and Controls . . . . . . . . . . . . . . . .8
Controls and Indicators . . . . . . . . . . . . . 8
Using Remote Control . . . . . . . . . . . . .9
Remote Control Parts Description. . . . . 9
Attaching the Floor Stand
(XBR-98Z9G only). . . . . . . . . . . . . . . . 11
Bundling the cables
(XBR-98Z9G only). . . . . . . . . . . . . . . . 13
Connection Diagram . . . . . . . . . . . . . 15
Installing the TV to the Wall . . . . . . . 17
Detaching the Table-Top Stand from
the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installing the TV against a wall or
enclosed area. . . . . . . . . . . . . . . . . . 20
Troubleshooting. . . . . . . . . . . . . . . . . 21
Troubles and Solutions . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . .22
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
Note
Images and illustrations used in the Setup Guide and this
manual are for reference only and may differ from the
actual product.
Location of the identification label
Labels for the TV Model No. and Power Supply rating are
located on the rear of the TV. They can be found by
removing the terminal cover.
CAUTION
To prevent electric shock and blade exposure, do not use
this AC plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted.
Operate the TV only on 110 V - 240 V AC (U.S.A./Canada
120 V AC)
Note
NoteNote
This television includes a QAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to a cable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.
For information on
setting up your TV,
refer to the Setup
Guide.
The 98” class has a 97.5 inch (247.7 cm) viewable image
size and the 85” class has a 84.6 inch (214.8 cm) viewable
image size (measured diagonally).
Help
Find more troubleshooting and other useful information
directly from your TV. Press HELP on the remote control
to display a list of topics, or to search by keyword.
Help Guide (Manual)
For more detailed information, select [Help Guide] from
the Help menu on your TV. You can also check the Help
Guide from your PC or smartphone (information
provided on the back cover of this manual).
IMPORTANT NOTICE
Owner’s Record
The model and serial numbers are located at the side
and/or rear of the TV. Record these numbers in the
spaces provided below. Refer to them whenever you call
upon your Sony dealer regarding this TV.
Model Name
Serial No.
3
US
US
FCC Related Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Safety and Regulatory
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to
licensing.
5 GHz bands are restricted to indoor operations only.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or
operating with any other antenna or transmitter except
Grant condition.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5650-
5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
WARNING
Stability Hazard
The television set may fall, causing serious personal injury
or death.
Never place a television set in an unstable location. A
television set may fall, causing serious personal injury or
death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
Only using furniture that can safely support the television
set.
Ensuring the television set is not overhanging the edge of
the supporting furniture.
• Not placing the television set on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable
support.
• Not placing the television set on cloth or other materials
that may be located between the television set and
supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television set or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Before setting up your TV
Some TV models are packaged with a detached Table-Top
Stand so you can mount your TV to a wall right away. See
page 17 (Installing the TV to the Wall) if you want to mount
the TV to a wall. If you are not mounting the TV to a wall,
you will need to attach the Table-Top Stand. You will need a
Phillips screwdriver (not supplied) and the supplied screws
to complete the task, refer to the Setup Guide.
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger
size TVs require three or more people (five or more people
for XBR-98Z9G).
• Correct hand placement while carrying the TV is very
important for safety and to avoid damage.
XBR-98Z9G
XBR-85Z9G
• Ensure your TV has adequate ventilation, see page 20.
For best picture quality, do not expose the screen to direct
illumination or sunlight.
• Avoid installing the TV in a room with reflective wall and
floor materials.
Safety Information
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: XBR-98Z9G / XBR-85Z9G
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
4
US
Avoid moving the TV from a cold area to a warm area.
Sudden room temperature changes may cause moisture
condensation. This may cause the TV to show poor
picture and/or poor color. Should this occur, allow
moisture to evaporate completely before powering the TV
on.
Securing the TV
Sony strongly recommends taking
measures to prevent the TV from
toppling over.
Unsecured TVs may topple and result in
property damage, serious bodily injury or
even death.
Preventing the TV from Toppling
Secure the TV to a wall and/or Stand.
Do not allow children to play or climb on furniture and TV
sets.
Avoid placing or hanging items on the TV.
Never install the TV on:
Slippery, unstable and/or uneven surfaces.
Furniture that can easily be used as steps, such as a
chest of drawers.
Install the TV where it cannot be pulled, pushed, or
knocked over.
Install the TV so that the TV’s Table-Top Stand does not
protrude out from the Stand (not supplied). If the Table-
Top Stand protrudes out from the Stand, it may cause TV
set to topple over, fall down, and cause personal injury or
damage to the TV.
Route all AC power cords and connecting cables so that
they are not accessible to curious children.
Recommended Measures to Secure the
TV
Table-Top Stand
Consider the following measures when securing your TV to
a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of the TV. Use two angle braces (not supplied) to secure
the Stand. For each angle brace use the appropriate
hardware to:
Attach one side of the angle brace to the wall stud.
Attach the other side to the Stand.
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV’s Table-Top
Stand) (XBR-98Z9G only).
• M4 machine screws (screwed into the TV’s Table-Top
Stand) (XBR-85Z9G only).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
XBR-98Z9G
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
XBR-85Z9G
Angle brace
(not supplied)
Stand
Rope or chain
(not supplied)
Screw (not
supplied)
M6 machine screw
(not supplied)
Screw hole on the TV’s
Table-Top Stand
1.5 N·m
{15 kgf·cm}
8 mm - 12 mm
Screw (M6)
Rope or chain
TV’s Table-Top Stand
Screw (not
supplied)
1.5 N·m
{15 kgf·cm}
Screw hole on the TV’s
Table-Top Stand
Rope or chain
(not supplied)
M4 machine screw
(not supplied)
5
US
US
The length of the M4 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
3 Anchor the TV to the wall by using bolts, wall anchor and
chain (or rope).
XBR-98Z9G
Please refer to below illustration for M8 eye bolt length.
XBR-85Z9G
Please refer to below illustration for M6 eye bolt length.
4 mm - 7 mm
Screw (M4)
Rope or chain
TV’s Table-Top Stand
M8 eye bolts
(not supplied)
Wall-mount holes
Rope or
chain (not
supplied)
Wall-anchor
(not supplied)
12 mm - 16 mm
TV’s rear cover
M8 eye bolt
M6 eye bolts
(not supplied)
Wall-mount holes
Rope or
chain (not
supplied)
Wall-anchor
(not supplied)
10 mm - 12 mm
TV’s rear cover
M6 eye bolt
6
US
Floor Stand (XBR-98Z9G only)
1
Secure the TV to the wall.
Use the optional hardware listed as follows (not
supplied):
M8 eye bolt (screwed into the TV’s rear cover).
A screw or similar (attach it to the Stand).
Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
Please refer to below illustration for M8 eye bolt length.
Note
NoteNote
Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
Securing the TV to the Stand without securing the TV and
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
How to care for your BRAVIA TV
Safety is very important. Please read and follow the safety
documentation (Safety Booklet) separately provided.
Unplug the TV and other
connected equipment from
the wall outlet before you
begin cleaning your TV.
Wipe the LCD screen gently
with a soft cloth.
Stubborn stains may be removed with a cloth slightly
moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the
instruction provided on the package.
Never spray water or detergent
directly on the TV set. It may drip
to the bottom of the screen or
exterior parts and enter the TV
set, and may cause damage to
the TV set.
Never use strong solvents such as
a thinner, alcohol or benzine for
cleaning.
Do not plug in the TV into the wall outlet until the
moisture from cleaning has evaporated.
The TV should also be placed on a stable surface to prevent
it from toppling over (see page 4). If you have young
children or pets at home, check regularly to ensure the TV is
securely fastened.
M8 eye bolt
(not supplied)
Rope or chain
(not supplied)
Wall-anchor
(not supplied)
Rope or chain
(not supplied)
12 mm - 16 mm
TV’s rear cover
M8 eye bolt
Precautions
7
US
US
Note
NoteNote
For details of supported formats, refer to the “Specifications” in this manual.
For supported PC formats, refer to the Help Guide.
The BRAVIA® 8K TV Experience
Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “8K TV Experience”. This document will help you
get the most out of your TV. Please take a moment to register your TV at:
U.S.A.: http://productregistration.sony.com
Canada: http://www.sony.ca/registration
Four Steps to an 8K TV Experience
Set, Source, Sound, and Setup.
1
Set
Now that you have made the best selection in LED backlit LCD TV technology, be sure to remove all of the accessories
from the packaging before setting up your TV.
2
Source
To experience the stunning detail of your BRAVIA TV, you need access to HD programming.
Upgrade your signal or content source to high-definition by contacting your HD service provider.
Bring the astonishing resolution of your Sony 8K Ultra HD TV to life with Sony 4K Ultra HD Blu-ray Player. (The
availability depends on region)
Receive over-the-air HD broadcasts with an HD-quality antenna connected directly to the back of your TV.
Visit http://www.antennaweb.org for more information on antenna selection and setup.
Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD
equipment.
3
Sound
Complete the high-definition experience with a BRAVIA Sync™ surround sound system or A/V receiver from Sony.
4
Setup
Install your TV and connect your sources. See page 15 for sample connection diagrams. To help assure the highest quality
for your HD experience, use Premium High Speed HDMI (High-Definition Multimedia Interface) cables.
To learn more about 8K TV, visit:
U.S.A.: http://www.sony.com/HDTV
Canada: http://www.sony.ca/hdtv
This TV displays all video input signals in a resolution of 7,680 dots × 4,320 lines.
8
US
Parts and Controls
 (Power) / + / –
When the TV is off,
Press to power on.
When the TV is on,
Press and hold to power off.
Press repeatedly to change the
function, then press + or – button to:
•Adjust the volume.
Select the channel.
Select the input source of TV.
Remote Control sensor*
1
/
Light sensor*
1
/ Illumination LED
The illumination LED lights up or blinks
according to the status of the TV.
For more information, refer to the Help
Guide.
Built-in MIC*
2
*
3
Use the hands-free built-in microphone
for the Google Assistant or voice
search. To enable the built-in MIC,
follow the on-screen instructions when
you press the button.
Built-in MIC LED
The built-in MIC LED lights up in amber
when the built-in MIC is enabled. The
built-in MIC LED can be disabled.*
3
*1 Do not place anything near the sensor.
*2 The Google Assistant or voice search requires
an Internet connection. The Google Assistant
or voice search with the built-in MIC is available
only on limited region/country/language.
Standby power consumption will increase
because the built-in MIC is always listening
when the Google Assistant or voice search with
the built-in MIC is enabled.
*3 For more information, see the Online Help
Guide (page 2).
Controls and Indicators
ȩ̖
̗̕
9
US
US
Using Remote Control
 (TV standby)
Turn on or turn off the TV (standby
mode).
Number buttons
Use with the 0-9 buttons to select
digital channels.
APPS
Display a list of installed apps.
Google Play
Access the “Google Play” online service.
NETFLIX (Only on limited region/
country/TV model)
Access the “NETFLIX” online service.
Color buttons
Execute corresponding function at that
time.
Remote Control Parts Description
The remote control shape, location, availability and function of remote control buttons may
vary depending on your region/country/TV model.
(The Google Assistant) /
(Microphone)
Use the Google Assistant*
1
*
2
or
voice search*
2
. (e.g., Search
various content by voice.)
//// (Navigation
D-Pad)
On screen menu navigation
and selection.
TV
Switch to a TV channel or input
and display the TV menu.
*1 Only on limited region/country/language.
*2 The Google Assistant or voice search requires an
Internet connection.
MIC
10
US
GUIDE
Display the digital program guide, or
EPG of cable/satellite box after setting
[Cable/Satellite box setup].
DVR
Display the DVR’s list of recorded
programs after setting [Cable/Satellite
box setup].
INPUT
Display and select the input source, etc.
(Quick settings)
Display Quick Settings.
BACK
Return to the previous screen.
HOME
Display the TV Home Menu.
VOL +/– (Volume)
Adjust the volume.
JUMP
Jump back and forth between two
channels or inputs. The TV alternates
between the current channel or input
and the last channel or input that was
selected.
MUTE
Mute the sound. Press again to restore
the sound.
Hint
The accessibility shortcut service can be
turned on or off by pressing and holding
MUTE.
CH +/– (Channel)
Select the channel.
AUDIO
Select the sound of multilingual source
or dual sound for the program currently
being viewed (depend on program
source).
SUBTITLE/CC
Turn subtitles on or off (when the
feature is available).
HELP
Display the Help menu. Help Guide can
be accessed from here.
///
Operate media contents on the TV and
connected BRAVIA Sync-compatible
device.
REC
Record the current program with the
DVR after setting [Cable/Satellite box
setup].
DISPLAY
Display information about the channel/
program/input you are viewing.
Note
Note
For more information about [Cable/Satellite box
setup], refer to the Help Guide.
Guidelines for IR Remote Control
Point your remote control directly at
the IR sensor located on your TV.
Make sure that no objects are blocking
the path between the remote control
and the IR sensor on your TV.
Fluorescent lamps can interfere with
your remote control; try turning off the
fluorescent lamps.
If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
11
US
US
Attaching the Floor Stand
(XBR-98Z9G only)
Your TV is shipped with Table-Top Stand
attached to the TV.
Recommended
Refer to the instructions below on how to
change the Table-Top Stand to Floor Stand.
Note
Do not put stress on the LCD panel or the frame
around the screen.
Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Floor Stand.
Seven or more people are needed to carry out
this installation.
1 Lift up the TV.
2 Attach the Floor Stand to the TV.
FS1
FS2
12
US
3 Support the Floor Stand while
attaching them to the TV using the
supplied screws to avoid
dropping.
Note
Note
If using an electric screwdriver, set the
torque at approximately 1.5 N·m {15 kgf·cm}.
4 Remove screws from Table-Top
Stand.
Note
Note
When reassemble the Table-Top Stand,
make sure it matches the screw holes.
Five or more people are needed to
transport a large TV set.
M6L23
M6L23
13
US
US
Bundling the cables
(XBR-98Z9G only)
Note
Do not bundle the AC power cord together with
other cables.
1
Note
Note
To open the cable clamper for bundling the
cables, press the side of the clamper ,
then open as illustrated.
2
3
CA
CB
CC
CC2
CC2
14
US
4
5
15
US
US
Connection Diagram
For more information on connections, refer to the Help Guide by pressing HELP on the
remote control.
Note
When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the
connection can damage the TV.
HDMI
Device
VCR/Video game
equipment/DVD player/
Camcorder
Audio
System
with
Optical
Audio
Input
Home Controller
Cable/
Antenna
Router HDMI
Device
Digital still
camera/
Camcorder/
USB
storage
media
Headphone
Audio
System
with
eARC/
ARC/
HDMI
Device
< 7 mm
Home
Controller
HDMI Device
Digital still camera/
Camcorder/USB
storage media
< 1.5 mm
AV Receiver
16
US
REMOTE RS-232C
REMOTE IR
IN
These jacks are for receiving the
external control signal. Enables
extended control of the TV using RS-
232C via the RS-232C and IR IN jacks.
RS-232C: connect to the RS-232C
terminal of the home controller.
IR IN: connect to the IR out terminal
of the home controller.
Take care to not connect to
headphones or an external audio
system.
/ VIDEO IN
For a composite connection, use an
Analog Extension Cable (not
supplied).
 (Headphone)
Supports 3-pole stereo mini jack only.
You cannot output sound from both
the headphone and the TV speakers
at the same time.
USB 1/2, USB 3
Connecting a large USB device may
interfere with other connected
devices beside it.
When connecting a large USB device,
connect to the USB 1 port.
HDMI IN 1/2/3/4
HDMI interface can transfer the digital
video and audio on a single cable.
When connecting an 8K supported
device, connect to the HDMI IN 4
terminal.
To enjoy high quality 4K 60p
contents, connect a Premium High
Speed HDMI cable and set the [HDMI
signal format] to Enhanced format.
Do this setting individually for each
connected HDMI IN terminal. For
details of supported formats, refer to
the “Specifications” in this manual
(page 22-23).
HDMI IN 3 eARC/ARC (Enhanced
Audio Return Channel/ Audio
Return Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your
audio system. An audio system that
supports HDMI eARC/ARC can send
video to the TV, and receive audio
from the TV via the same HDMI cable.
If your audio system does not support
HDMI eARC/ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
Use the HDMI cable with Ethernet to
connect audio system with eARC.
CENTER SPEAKER IN
To use your TV speakers as the center
speaker, connect the output of your
AV receiver to the CENTER SPEAKER IN
on your TV.
Before connecting cables, disconnect
the AC power cord of both TV and AV
receiver.
Make sure the [Speakers] is set to
[Audio system].
To prevent hiss when not connecting
the CENTER SPEAKER IN to an AV
receiver, disable [TV center speaker
mode]. For details, refer to the Help
Guide.
3.5 mm
1234
1: L
2: Video
3: Ground
4: R
< 12 mm
< 21 mm
10 mm
17
US
US
Installing the TV to the Wall
This TV’s instruction manual only provides the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a suitable Wall-Mount Bracket (not supplied). If the
Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see
page 19 (Detaching the Table-Top Stand from the TV).
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
Please contact Customer Service to obtain the Wall-Mount Bracket 6L (not supplied)
(XBR-98Z9G only).
Follow the instruction guide provided with the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing this TV, especially to determine the
strength of the wall for withstanding the TV’s weight.
The screws for Wall-Mount Bracket are not supplied.
The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount
Bracket thickness. Please refer to below illustration.
Refer to the following table for wall-mount hole pattern.
Be sure to store the unused screws and Table-Top Stand in a safe place until you are
ready to attach the Table-Top Stand. Keep the screws away from small children.
Note
Read the supplied Safety Booklet for additional safety information.
For more detailed information, visit Sony Customer Support website.
XBR-98Z9G XBR-85Z9G
Wall-Mount Bracket
Screw (M8)
12 mm - 16 mm
TV set
Wall-Mount Bracket
Screw (M6)
10 mm - 12 mm
TV set
Model Name
Wall-mount hole pattern
×
XBR-98Z9G 600 × 400 mm
XBR-85Z9G 400 × 400 mm
18
US
XBR-85Z9G only
1 Remove the stand cover and terminal covers.
2 Remove the screws from the rear of the TV.
3 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
ʓ
ʔ
ʔ
ʕ
ʓ
Wall-Mount Bracket
(not supplied)
Screw (not supplied)
19
US
US
To detach the Table-Top Stand from the TV, remove the screws .
Note
Be careful when lifting the TV as the Table-Top Stand is detached, the Table-Top Stand may topple over
and cause personal injury.
Take care when removing the Table-Top Stand from the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.
Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the
TV.
Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV
with the LCD panel facing down.
When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
Detaching the Table-Top Stand from the TV
20
US
Installing the TV against a wall or enclosed area
Ventilation
Never cover the ventilation holes or insert anything into the cabinet.
Leave space around the TV set as shown below.
Installed with stand
Installed on the wall
Note
Inadequate ventilation can lead to overheating of the TV and may cause damage to your TV or cause a
fire.
11
7
/
8
inches
(30 cm)
4 inches
(10 cm)
4 inches
(10 cm)
2
3
/
8
inches
(6 cm)
Leave at least this much space around the set.
4 inches
(10 cm)
4 inches
(10 cm)
Leave at least this much space around the set.
4 inches (10 cm)
11
7
/
8
inches
(30 cm)
13
/
16
inches
(2 cm)
(XBR-85Z9G only)
Never install the TV set as follows:
Air circulation is blocked.
Air circulation is blocked.
WallWall
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Sony XBR85Z9G Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues