Eureka HotShot 340 series Manuel utilisateur

Marque: Eureka

Modèle: HotShot 340 series

Catégorie: Nettoyeurs à vapeur

Taper: Manuel utilisateur

Ce manuel convient également à

HotShot™

Household Type

Hand Steamer

Owner’s Guide

350 Series

INDEX

Important Safeguards...................2

Service Information ......................5

Use & Assembly ........................6-9

Maintaining...................................9

Problem Solving .........................12

Customer Order Form ................13

Warranty................................15-16

IMPORTANT

Do not return this

product to the store.

For assembly problems or

questions contact: Eureka’s

Customer Service Division

toll free at 1-800-282-2886*, 7

a.m. to 8 p.m., Central Standard

Time, Monday through Saturday.

For replacement of broken or

missing items to be shipped

direct to you, call 1-800-438-

7352*, 8 a.m. to 4:45 p.m.,

Central Standard Time,

Monday through Friday.

*En Mexico llame al 254 23 52

For location of nearest Eureka

Warranty Station or Service

Information, call 1-800-282-2886. www.eureka.com

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER.

WARNING

To reduce the risk of fire, electric shock, or injury:

1 Do not use outdoors.

2 Do not leave steam cleaner when plugged in. Unplug the electrical cord when not

in use and before servicing.

3 Do not allow to be used as a toy. Close attention is necessary when used near

children, pets and plants.

4 Use only as described in this manual. Use only manufacturer’s recommended

accessories.

5 Do not use with damaged cord or plug. If steam cleaner is not working as it

should, has been dropped, damaged, left outdoors, or dropped into water, return it

to a service center before using.

6 Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull

cord around sharp edges or corners. Keep cord away from heated surfaces.

7 Do not use extension cords or outlets with inadequate current carrying capacity.

8 Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9 Do not handle plug or steam cleaner with wet hands or operate without shoes.

10 Do not put any object into openings. Do not use with any opening blocked.

11 Store your steam cleaner indoors in a cool, dry area.

12 Keep your work area well lighted.

Never turn the appliance over or on its side when using steam. Never direct

steam towards people, animals, plants, and equipment with electrical

components.

14 Do not immerse the steam cleaner into water or other liquids. Always unplug the

power cord from the electrical socket when filling the steam cleaner.

15 Never put descaling, aromatic, alcoholic or detergent products into the

steam cleaner, as this may damage it or make it unsafe for use.

16 Before filling, proceed as follows: 1) unplug the power supply, 2) relieve

pressure by depressing steam delivery button, 3) allow steamer to cool down for

three minutes, 4) relieve any built up pressure again by depressing steam delivery

button, 5) slowly unscrew safety cap (see page 6, item 5) and wait 5 seconds

before removing.

17 Metal tips on nozzles will get hot during use. Do not touch hot surfaces.

Allow the attachments to cool down before replacing them while the appliance is

being used.

18 This appliance is intended for household use only.

19 Any repair work, including the replacement of the power cord must only be carried

out by an Authorized Eureka Service technician because a special tool is required.

Call for nearest service location 1-800-282-2886.

SAVE THESE INSTRUCTIONS

CONSEILS DE SÉCURITÉ

Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent

être observées, incluant les suivantes:

LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE NETTOYEUR À VAPEUR.

AVERTISSEMENT

Pour réduire le risque de feu, de choc électrique ou de blessure:

1 Ne pas utiliser le nettoyeur à vapeur à l’extérieur.

2 Ne pas laisser le nettoyeur à vapeur seul quand il est branché. Débrancher le nettoyeur

à vapeur lorsque vous ne l’utilisez pas ou avant l’entretien.

3 Ne pas permettre que le nettoyeur à vapeur soit utilisé comme un jouet. Une attention

particulière est nécessaire lorsqu’il est utilisé par ou près d’un enfant, animales ou

plantes.

4 Suivre strictement les recommandations d’utilisation de ce manuel. Utiliser

uniquement les accessoires recommandés par le fabricant.

5 Ne jamais utiliser le nettoyeur à vapeur si le cordon ou la fiche sont endommagés. Si

le nettoyeur à vapeur ne fonctionne pas comme il le devrait, s’il a été échappé, s’il

est endommagé, s’il a été laissé à l’extérieur ou échappé dans de l’eau, le retourner

à un centre de service avant de l’utiliser.

6 Ne pas tirer ou transporter le nettoyeur à vapeur par le cordon. Ne pas utiliser le

cordon en guise de poignée. Ne pas fermer une porte sur le cordon ou tirer le cordon

sur des bordures ou des coins pointus. Tenir le cordon à distance des surfaces

chauffantes.

7 Ne pas utiliser des cordons de rallonge ou des prises qui n’ont pas une capacité

suffisante pour transporter le courant.

8 Ne pas débrancher le nettoyeur à vapeur en tirant sur le cordon. Pour débrancher

saisir la fiche et non pas le cordon.

9 Ne pas manipuler la fiche ou le nettoyeur à vapeur avec les mains mouillées ou faire

fonctionner pieds nus.

10 Ne rien insérer dans les ouvertures. Ne pas utiliser si des ouvertures sont bloquées.

11 Entreposer votre nettoyeur à vapeur à l’intérieur, dans un endroit propre et sec.

12 Maintenir un bon éclairage à l’endroit où vous travaillez.

13 Ne jamais retourner l’appareil, ou le mettre sur son côté lors de l’emploi de la

vapeur. Ne jamais diriger la vapeur vers une personne, un animal ou une plante

et tous les appareils comportant des pièces électriques.

14 Ne pas immerger le nettoyeur à vapeur dans de l’eau, ou d’autres liquides. Toujours

débrancher le cordon électrique de la prise lors de remplissage du nettoyeur.

15 Ne jamais mettre des produits détartrants, aromatiques, alcooliques ou

détergents dans le nettoyeur à vapeur. Ceux-ci peuvent l’abîmer ou le rendre

dangereux à utiliser.

16 Avant de remplir, faites le suivant : 1) débranchez le cordon électrique, 2) réduisez

la tension en appuyant sur le bouton qui règle l’arrivée de la vapeur, 3) attendez 3

minutes pour que l’appareil se refroidisse, 4) appuyez de nouveau sur le bouton qui

règle l’arrivée de la vapeur afin d’être sûr que toute tension accumulée se dissipe,

5) dévissez lentement le casque de protection (voir l’article 5 à la page 6) et attendez

5 secondes avant de l’enlever.

17 La pointe en métal de la lance chauffe pendant l’emploi. Ne touchez pas les

surfaces chaudes.

18 Permettez aux accessoires de se refroidir avant de les remettre pendant l’emploi de

l’appareil.

19 Cet appareil est conçu uniquement pour l’usage ménager. Tout travail d’entretien, y

compris le remplacement du cordon électrique doit être fait par un technicien Eureka

autorisé parce qu’un outil spécial est nécessaire.

CONSERVEZ CES INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric shock.

This appliance is equipped with a cord having an equipment-grounding conductor and

grounding plug. The plug must be inserted into an appropriate outlet that is properly

installed and grounded in accordance with all local codes and ordinances.

Instructions Visant la Mise à la Terre

Cet appareil doit être mise à la terre. En cas défaillance ou de panne éventuelles, la

mise à la terre fournit au courant un chemin de moindre résistance qui réduit le risque

de choc électrique. Cet appareil est pourvu d’un cordon muni d’un conducteur de terre

et d’une fiche avec broche de terre. La fiche doit être branchée dans une prise

appropriée correctement installée et mise à la terre conformément aux règlements et

ordonnances municipaux.

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric

shock. Check with a qualified electrician or service person if you are in doubt as to

whether the outlet is properly grounded. Do not modify the plug provided with the

appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

AVERTISSEMENT

Un conducteur de terre mal raccordé peut entraîner un risque de choc électrique.

Consulter un électricien ou un technicien d’entretien qualifié si vous n’êtes pas certain

que la prise est correctement mise à la terre. Ne pas modifier la fiche fournie avec

l’appareil-si elle ne peut être insérée dans la prise, faire installer une prise adéquate

par un électricien qualifié.

This appliance is for use on a nominal 120 volt circuit and has a grounding plug that

looks like the plug illustrated in Figure A. A temporary adapter which looks like the adapter

illustrated in Figure B may be used to connect this plug to a two-pole receptacle, as

shown, if a properly grounded outlet is not available. The temporary adapter should be

used only until a properly grounded outlet, Figure A, can be installed by a qualified

electrician. The green colored rigid ear, lug, or the like extending from the adapter must

be connected to a permanent ground such as a properly grounded outlet box cover.

Whenever the adapter is used, it must be held in place by a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian

Electrical Code.

Cet appareil est destiné à un circuit de 120 V et est muni d’une fiche de mise à la terre

semblable à celle illustrée par le Figure A. S’assurer que l’appareil est branché à une

prise de courant ayant la même configuration que la fiche. Aucun adaptateur ne devrait

être utilisé avec cet appareil.

Note: Au Canada, l’utilisation d’un adaptateur temporaire n’est pas autorisée par le

Code canadien de l’électricité.

GROUNDED

OUTLET BOX

GROUNDED

OUTLET BOX

FIGURE B

METAL

SCREW

ADAPTER

FIGURE A

GROUNDING BLADE

IS LONGEST OF THE

THREE BLADES

GROUNDING

TAB

GENERAL INFORMATION

The steamer is designed as a complete change from old methods of traditional

cleaning. This appliance is designed as a multi-purpose cleaner with a variety of

applications.

Service Information

The instructions in this booklet serve as a guide to routine maintenance. For additional

service information telephone our toll free number for the nearest Eureka Authorized

Warranty Station. You should know the model and type numbers when you call:

USA: 1-800-282-2886

Mexico: 254 23 52

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service Division, 807 North Main

Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866

Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Warranty for complete

service information.

Rating Plate

The model and type are indicated on the rating

plate located on the bottom of the cleaner. For

prompt and complete service information,

always refer to these numbers when inquiring

about service.

Model & Type______________________

THE EUREKA COMPANY

BLOOMINGTON, ILLINOIS 61701

MODEL TYPE

WATTS HERTZ

SERVICE INFORMATION: 1-800-282-2886

1. Body

2. Handle

3. Steam Delivery

Button

4. Articulated Nozzle

5. Safety Cap

6. Power On Light

7. Electrical Cord

8. Rubber Gasket

ACCESSORIES

9. Measuring Cup

10. Funnel

11. Straight Nozzle

12. Fabric Tool

13. Cloth for Fabric

Tool

14. Window Cleaner

15. Flexible Extension

Hose

16. Scrub Brush

17. Angled Nozzle

Main Features of the HOT SHOT™ hand held steamer

Thank you for having chosen our product and allow us to congratulate you for having

purchased the Eureka Hot Shot hand held steamer.

The Eureka Hot Shot hand held steamer achieves a high degree of hygienic and

degreasing power on many surfaces. It turns water into steam in just a few minutes, so

when contact is made with surfaces dirt and grime is removed.

Since the Eureka Hot Shot hand held steamer uses the active power of steam without

the use of detergents or soap, it is safe for the environment.

Some surfaces that can be cleaned with the Hot Shot hand held steamer are: upholstery,

sealed grout, bathroom and kitchen tile, stove tops, removable exhaust filter over stoves,

windows and mirrors.

The fabric tool may be used to steam wrinkles out of clothing, window coverings, etc.

CAUTION: Do not direct steam at the body.

Other Advantages of the Eureka Hot Shot hand held steamer

The Eureka Hot Shot hand held steamer can kill dust mites and some types of bacteria,

such as salmonella and E-coli when used properly.

To disinfect a specific area, position the steamer over the area, not more than 1 inch

away and slowly move across the surface. This allows the surface under the steamer to

reach approximately 1707F. Use this procedure to disinfect surfaces in: the bathroom,

food preparation areas, pillows and bedding, pet sleeping quarters, etc.

Description of the HOT SHOT™ hand held steamer

WARNING: After every use, press steam delivery button until all pressure has

been released before removing safety cap.

1. Unscrew the safety cap. (After first use, turn the appliance

over in order to completely empty the boiler.)

2. Fill the measuring cup with water to the marked water

line, once. Use the funnel to pour the water into the boiler.

The boiler takes only one measuring cup of water at a

time. (6 oz. maximum) Do not overfill.

NOTE: Never put descaling, aromatic, alcoholic or detergent products into the

appliance, as this may damage it or make it unsafe for use.

3. Screw the cap back onto the appliance.

Attachments

4. The straight nozzle, flexible hose and fabric tool all attach using the following

directions.

HOW TO ASSEMBLE AND USE

INSTRUCTIONS FOR USE

The Eureka Hot Shot™ hand held steamer is designed to thoroughly clean hard surfaces

and upholstery that will withstand high heat. Do not use on soft plastics, unsealed wood,

and cold glass.

WARNING: On surfaces that have been treated with wax or some no wax floors,

the sheen may be removed by the heat and steam action. Do not use

on unsealed wood. This could cause the woodgrain to rise.

It is therefore recommended that a sample cleansing be carried out

on an isolated area of the surface to be cleaned. Also, check use and

care instructions from the manufacturer on the object you want to

clean.

Do not plug unit into an electrical outlet until Step 7.

Align the single mark on the attachment

to the single mark on the appliance. Push

the attachment onto the articulating nozzle

until it stops against the appliance’s body.

Turn in a clockwise direction until the

single mark on the attachment is aligned

with the double mark on the appliance.

The attachment is now locked into

position.

Gasket

Articulating Nozzle

Straight Nozzle

Flexible Hose

Fabric Tool

HOW TO ASSEMBLE AND USE (continued)

Hexagonal end

of nozzle

Angled NozzleScrub Brush

The Hot Shot’s articulating nozzle allows the

steam to be directed as desired. To use the

articulating nozzle, align the single marks on the

attachment and appliance, push the attachment

onto the articulating nozzle until it covers the

round gasket (See page 7). Now turn clockwise

until the single mark on the attachment is aligned

with the double mark on the appliance. Now you

can direct the steam as desired.

Hinges

Tabs

Window Cleaning Tool Fabric Tool

5. To attach the scrub brush and angled

nozzle.

Both of these attachments can be applied to the articulated nozzle (on appliance)

straight nozzle, and the flexible extension hose.

Decide on your desired angle, then push the attachment onto the hexagonal end of

the nozzle.

6. To attach the window cleaning tool.

CAUTION: Do not use the window cleaning tool on cold glass. It may break

the glass.

First attach the fabric tool to either the appliance or the flexible extension hose.

Remove the cloth from the fabric tool. There are two open tabs on the back edge of

the fabric tool and there are two hinges on the back edge of the window cleaning

tool. Place the hinges into the open tabs, then swing the window cleaning tool up

against the bottom of the fabric tool until the two pieces click together. To remove

the window cleaning tool from the fabric tool. Just push your thumb against the

fastener on the window cleaning tool, they will separate.

As soon as the Hot Shot emits steam, begin using it, passing slowly over the surfaces

to be cleaned. This is the ideal method for thoroughly cleaning your surfaces. To

disinfect specific areas, leave the Hot Shot over the spot, no more than 1 inch and

slowly move across the surface.

How to start the Hot Shot

7. Plug the appliance into an electrical outlet.

WARNING: Never turn the hand held steamer over when using steamer, or

direct steam at any person, animal, or plant.

How to refill the Hot Shot when it is out of steam.

8. Unplug the appliance. Press steam delivery button until all pressure has been

released. Wait for about 3 minutes before carefully unscrewing the safety cap.

Turn slowly a half turn and wait for the hissing noise created by residual steam to

stop. Unscrew the cap completely and allow to cool. Slowly pour one measuring

cup (included) into the boiler using the funnel, (included). (6 oz. maximum) Do not

overfill. Screw the safety cap back on the appliance. Plug the appliance into electrical

outlet and steam will start to be produced as before.

WARNING: This unit is under pressure. After every use, press steam delivery

button until all pressure has been released before removing safety

cap.

Cleaning and Maintenance

NOTE: The appliance must be unplugged from the electrical outlet and allowed

to cool down before all cleaning and maintenance tasks.

9. Let the appliance cool down completely before cleaning it or putting it away.

10. After each use empty any remaining water from the boiler.

11. Store in a dry, cool place.

12. In order to guarantee perfect functioning over a long period of time, the boiler needs

to be rinsed out with water once a month to eliminate any accumulated calcium

deposits. Do not use vinegar or other descaling substances. Put in one measure

of water, replace the safety cap and shake to loosen any accumulated deposits.

Remove safety cap and immediately empty water into a sink. CAUTION: Do not

immerse the appliance in water.

Steam Delivery

Button

Power On

Light

The power on light will come on. Steam will be

ready after about 3 to 4 minutes. Do not leave the

appliance unattended during the waiting period.

Press steam delivery button to release steam.

Suggested Uses for Attachments

Fabric Tool

Scrub Brush

Window Cleaner

Straight Nozzle

Angled Nozzle

Flexible Hose

Stovetops, countertops, sealed grout, inside trash

receptacles.

Steaming clothes, upholstery, window coverings.

Windows, mirrors, glass doors. Do not use on cold

windows or glass. It may break.

Edging, window sills, ledges, tile, mantles.

Difficult to reach areas, toilet bowls, window sills.

Areas requiring additional reach. This attachment can be

used with all the other tools.

PROBLEM SOLVING

NOTE: Unplug the electrical cord before servicing.

PROBLEM CAUSE SOLUTION

Appliance won’t

start

Electric plug

No water in tank

Push plug securely into

outlet. Verify power on light

is on.

Try another outlet.

Check circuit breaker.

Check the tank for water.

General questions

Appliance won’t

make steam

Call 1-800-438-7352

between 8:00 AM–4:45 PM

Monday through Friday,

central standard time.

Know the Model and Type

numbers when you call.

Assembly or related

accessories

Appliance spits

water out of nozzle

Too much water in

tank. Do not overfill.

Unit positioned

upside down.

Not fully preheated.

Water tank too hot.

Not properly

installed.

Check the water level in the

tank.

Use in upright position.

Allow more time for water to

heat up.

Allow more time for cooling.

Add water slowly.

Use special funnel provided.

Check for proper assembly.

Review this guide for

assembly instructions.

Water boils out of fill

spout when adding

water.

Accessories will not

stay on.

VACUUM CLEANERS

The Eureka Company

P.O. Box 2799

Bloomington, IL 61702-2799

Name

Address (street address needed for UPS)

City State Zip

Telephone (Day) (Eve) (Fax)

Name

Address (street address needed for UPS)

City State Zip

Telephone (Day) (Eve) (Fax)

__________________

Model Number

__________________

Type

__________________

Serial Number

IMPORTANT:

Be sure to include

your model, type, and

serial numbers. These

numbers may be

found on the rating

plate.

Genuine Eureka Parts For Model 350

Part No. Qty. Price (USD) Total

Small Brush 61014 2.59

Angular Nozzle 61015 1.99

Cleaning Cloth 61016 2.49

Upholstery Nozzle 61017 7.99

Window Cleaner 61018 5.49

Hose 61019 19.99

Nozzle 61020 5.49

Total (prices subject to change without notice)

Tax (add state and local taxes as required by law)

Postage and Handling Charge (Within the U.S.A.)

TOTAL

Printed in U.S.A.

Method of Payment (No C.O.D.s)

Check or money order (payable to The Eureka Company). Do not send currency.

Charge to my Visa (13/16 digits) MasterCard (13 digits) American Express (15 digits)

Acct. number Expiration date

Signature (Full name as shown on account) _____________________________________________

Part No. 70395

To Order

By Phone

1-800-

438-7352*

HOURS:

Call between 8 a.m.

and 4:45 p.m.

central standard time

By FAX

1-309-823-5789

*En Mexico

Llame 254 34 52

By Mail

Simply fill out this

Order Form.

Please be sure to

include day

and evening

phone numbers.

www.eureka.com

$3.75

ORDER FORM

3/00

(Not applicable in Canada)

To Answer Problems or Questions for U.S.A. and Canada call:

1-800-282-2886*

7 a.m. to 8 p.m. central standard time Monday through Saturday

THE EUREKA LIMITED WARRANTY

hat This Warranty Covers

Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to the

original purchaser and members of his or her immediate household. The warranty is subject to the following provisions.

hat This Warranty Does Not Cover

• Parts of the cleaner that require replacement under normal use.

• Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Owner’s Guide.

• Defects or damages caused by unauthorized service or the use of other than Genuine Eureka parts.

hat The Eureka Company Will Do

The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty. As a matter of warranty policy, the Eureka Company

will not refund the consumer’s purchase price.

arranty Registration

Please fill out and return the warranty registration card accompanying your cleaner.

btaining Warranty Service

To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Eureka Authorized Warranty Station.

You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”

For the location of the nearest Eureka Authorized Warranty Station or for service information, telephone toll free:

USA: 1-800-282-2886

Mexico: 254 23 52

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866 Langs

Drive, Cambridge, Ontario N3H 2N7.

If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Eureka Authorized Warranty Station. Return shipping

charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type, and serial numbers from the data plate on the cleaner.

Part No. 70397

(5/00) Printed in U.S.A.

urther Limitations and Exclusions

Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any warranty for Fitness For A

Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply

to you.

Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Eureka be liable for any consequential or incidental damages

you may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary by state.

uestions & Answers about Genuine Eureka Products

Why should I use only Genuine Eureka paper bags, belts, and parts in my Eureka product?

A: Using Genuine Eureka Products, which are made to our exacting specifications and engineered with emphasis on quality, performance, and customer satisfaction,

ensures the long life and cleaning efficiency of your Eureka product. Overall, this saves you money and helps to keep your home clean.

How can I be sure I am using only Genuine Eureka products in my product?

A: Typically, packaged products can be identified by a “Genuine Eureka Product” symbol (see illustration above). For further identification assistance, you may call our

toll-free number, 1-800-282-2886, for the location of a nearby Eureka Authorized Warranty Station.

Are there any differences between “made to fit” or “imitation” and Genuine Eureka parts?

A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly purchased “imitation” parts while thinking they

purchased genuine. Unfortunately, many of these customers discovered the differences after they experienced related difficulties.

For Genuine Eureka Value, Accept No Imitations!

THE EUREKA COMPANY

Bloomington, Illinois 61701

GENUINE

EUREKA PRODUCT

Household Warranty

abs 190