Samsung DVD-V6800 Manuel utilisateur

DVD-V6800

www.samsung.com

User’s Manual

AK68-01605S

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 1

2 -

English

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

DO NOT expose the DVD-VCR to

extreme temperature conditions

(below 5°C and above 40°C) or to

extreme humidity conditions (less

than 10% and more than 75%).

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Safety Instructions

DO NOT expose the DVD-VCR to

direct sunlight.

DO NOT expose the DVD-VCR

to any liquids.

If the remote control is not used

for a long period of time, remove

the batteries and store it in a

cool, dry place.

During a storm and/or lightning,

unplug the DVD-VCR from the

mains jack and aerial.

This product incorporates copyright protection technology that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for

home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engi-

neering or disassembling is prohibited.

1. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall

be placed on the apparatus.

2. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

The following illustrations represent precautions.

DO NOT place any objects on the

DVD-VCR or remote control.

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 2

English

- 3

Disc Markings

• CD is recorded as a Digital Signal

with better audio quality, less distor-

tion and less deterioration of audio

quality over time.

• Video with CD sound, VHS quality &

MPEG-1 compression technology.

- DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics).

- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc

or condition of the recording.

- The recorded disc may not run as playback depends on the recording speed.

- Do not run the player with two discs loaded at the same time.

~

PAL

DIGITAL

SOUND

STEREO

NTSC

Play Region Number

Both the DVD-VCR and the discs are coded by

region. These regional codes must match in

order for the disc to play. If the codes do not

match, the disc will not be played.

The Region Number for this player is

described on the rear panel of the player.

Disc Types (Logos)

Recording Types

Disc Size Max. Playing Time Characteristics

Single-sided 240 min.

Double-sided 480 min.

Audio

+

Video

VIDEO-CD

AUDIO-CD

DVD

• DVD contains excellent sound and

video due to Dolby Digital and

MPEG-2 system.

• Various screen and audio functions

can be easily selected through the

on-screen menu.

74 min.

Audio

+

Video

Audio

This DVD-VCR is capable of playing the following types of discs with the corresponding logos :

Play Region Number.

Stereo disc.

Dolby Digital disc.

Digital Audio disc.

NTSC broadcast system in U.S.A,

Canada, Korea, Japan, etc.

PAL colour system in Europe, Australia,

New Zealand, etc.

DTS disc.

Disc contains a Divx software product.

20 min.

74 min.

20 min.

Single-sided 80 min.

Double-sided 160 min.

12 Cm

8 Cm

12 Cm

8 Cm

12 Cm

8 Cm

Disc Type and Characteristics

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 3

4 -

English

Getting Started

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . .3

Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Front View of the DVD-VCR (DVD-V6800) . . . . . . . . . . .5

Rear View of the DVD-VCR (DVD-V6800) . . . . . . . . . . . .6

Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Inserting Batteries in the Remote Control . . . . . . . . . . . . . . .7

Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . .7

Connections

Connecting DVD-VCR to the TV using the RF Cable . . . . 9

Connecting DVD-VCR to the TV using the

Audio/Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting DVD-VCR to the TV using the

Component Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to an AV amplifier with the digital input jack . . 10

Connecting Extend Device . . . . . . . . . . . . . . . . . . . . . . . . 11

Plug & Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Settings

Tuning Your Television for the DVD-VCR . . . . . . . . . . . . . .13

Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . .13

Setting the Menu Language . . . . . . . . . . . . . . . . . . . . . . . .14

Presetting the Stations Automatically . . . . . . . . . . . . . . . . .14

Presetting the Stations Manually . . . . . . . . . . . . . . . . . . . . .15

Clearing a Preset Station . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Changing the Preset Station Table . . . . . . . . . . . . . . . . . . .17

Selecting The RF Out Sound Mode (B/G-D/K) . . . . . . . . . 18

Setting the VCR Output Channel . . . . . . . . . . . . . . . . . . . .18

VCR Functions

Selecting the Colour Mode . . . . . . . . . . . . . . . . . . . . . . . . .19

NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Intelligent Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . .19

Auto Power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Selecting the Cassette Type . . . . . . . . . . . . . . . . . . . . . . . .21

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Selecting the Recording Speed . . . . . . . . . . . . . . . . . . . . . .21

Protecting a Recorded Cassette . . . . . . . . . . . . . . . . . . . . .21

Recording a Programme Immediately . . . . . . . . . . . . . . . . .22

Recording a Programme with Automatic Stop . . . . . . . . . .22

Recording from Another VCR or Camcorder . . . . . . . . . . . . . .23

Using the Assemble Edit Function . . . . . . . . . . . . . . . . . . .23

Using the Timer Programming Feature . . . . . . . . . . . . . . . .24

Checking a Preset Recording . . . . . . . . . . . . . . . . . . . . . . .25

Cancelling a Preset Recording . . . . . . . . . . . . . . . . . . . . . .25

Playing Back

Playing a Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Adjusting Picture Alignment Manually . . . . . . . . . . . . . . . . .26

Selecting the Audio Output Mode . . . . . . . . . . . . . . . . . . . .26

Playing a Cassette in Slow Motion . . . . . . . . . . . . . . . . . . .26

Playing a Sequence Frame by Frame . . . . . . . . . . . . . . . .27

Playing a Sequence at Variable Speeds . . . . . . . . . . . . . . .27

Searching for a Specific Sequence . . . . . . . . . . . . . . . . . . .27

Using the Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . .29

DVD Functions

Setting Up the Language Features . . . . . . . . . . . . . . . . . . .29

Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . .31

Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . . .32

Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . .33

DivX(R) Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . .36

Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . .37

Adjusting the Aspect Ratio (EZ View) . . . . . . . . . . . . . . . . .38

Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . . .39

Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . .39

Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . .39

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

MP3/WMA/CD Audio Play . . . . . . . . . . . . . . . . . . . . . . . . . .42

Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

DivX/MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

DivX/MPEG4 Special Playback Features . . . . . . . . . . . . .46

Reference

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Troubleshooting Guide (VCR) . . . . . . . . . . . . . . . . . . . . . . .48

Troubleshooting Guide (DVD) . . . . . . . . . . . . . . . . . . . . . . .49

Contents

00000X_V6800_AFR_Eng 4/11/08 2:31 PM Page 4

English

- 5

Overviews

Front View of the DVD-VCR (DVD-V6800)

1. DVD DECK.

2. OPEN/CLOSE BUTTON.

3. VIDEO CASSETE COMPARTMENT.

4. EJECT BUTTON.

5. STANDBY/ON BUTTON.

6. VIDEO INPUT JACK LINE IN 2.

7. AUDIO L/R INPUT JACK LINE IN 2.

8. FRONT PANEL DISPLAY.

9. PROGRAMME SELECTION BUTTON.

10. DVD/VCR SELECTION BUTTON.

11. EZ VIEW BUTTON.

12. RECORD BUTTON.

13. REWIND/SKIP BACK BUTTON.

14. STOP BUTTON.

15. PLAY/STILL BUTTON.

16. FAST FORWARD/SKIP NEXT BUTTON.

5 6 7 8 9 10 11 12 13 14 15 16 17

1 2 3 4

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 5

6 -

English

1. ANTENA INPUT

2. RF OUT TO TV

3. LINE IN 1 (Audio / Video)

4. LINE OUT (Audio / Video)

5. LINE AUDIO OUT

(COMPONENT)

6. DIGITAL AUDIO OUT (COAXIAL)

7. COMPONENT VIDEO OUT

8. DIGITAL AUDIO OUT (OPTICAL)

1. The DVD Deck is active.

2. Disc is loaded.

3. The time, counter position, current deck

status is displayed.

4. VHS tape is inserted.

5. The VCR Deck is active.

6. A Timer Recording is programmed or in

progress.

6

1 2 3 4 5

Rear View of the DVD-VCR (DVD-V6800)

Display Indicators

2

4

6

8

1

3

5

7

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 6

English

- 7

Make sure that the following basic accessories

are supplied with your DVD-VCR.

You must insert or replace the batteries in the

remote control when you:

• Purchase the DVD-VCR

• Find that the remote control is no longer

working correctly

1 To release the battery compartment cover,

push the tab in the direction of the arrow and

lift up.

2 Insert two AAA, RO3 or equivalent batteries,

taking care to respect the polarities:

• + on the battery with + on the remote

control.

• – on the battery with – on the remote

control.

Do not mix different battery types (manganese

and alkaline for example).

3 Replace the cover by aligning it with the base

of the remote control and push it down.

Batteries for

remote controls

Remote Control

Audio & Video

Cable

RF-Cable

Owner’s

Instructions

Accessories

Inserting Batteries in the Remote

Control

Tour of the Remote Control

1

21

5

19

18

17

16

4

23

22

24

6

26

25

10

9

7

8

29

14

28

27

13

12

11

30

15

20

2

3

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 7

8 -

English

1. DVD,VCR

Used to operate DVD, VCR.

2. STANDBY/ON

Used to turn the power on or off.

3. Number buttons

4. TIMER

Used to activate the timer recording of

a programme.

5. REC ( ● )

Used to make a recording on cassette.

6. SKIP ( / )

Use to skip a title, chapter or track.

7. STOP ( ■ )

Used to stop during playback.

8. AUDIO

Used to access various audio functions.

9. TRK ( / )

Used to adjust picture alignment manually to

obtain the best possible picture during play-

back.

10. MENU

Used to display the on-screen menu.

11. OK



/



,

¦¦

/



Used to control the cursor in the on-screen

menu and confirm your choice.

12. EZ VIEW

Used to adjust the aspect ratio on a disc.

13. DISC MENU

Used to display a disc menu.

14. SUBTITLE

Used to change the DVD’s subtitle language.

15. ANGLE

Used to access various camera angles on a

DVD.

IPC (Intelligent Picture Control).

Used to adjust the sharpness of the picture.

16. INPUT SEL.

Used to select a external input signal.

17. TV/VCR

Used to select TV or VCR.

18. INFO.

Used to display the current setting or disc

status.

19. OPEN/CLOSE

Used to open and close the disc and video

cassette tray.

20. SHUTTLE

Used to play a sequence at variable speeds.

21. F.ADV/STEP

Used to advance a sequence frame by

frame.

22. SPEED

Used to select the recording speed.

23. PLAY/PAUSE ( )

Used to play or pause during playback.

24. SEARCH ( / )

Used to search forward or backward through

a disc.

25. PROG

Used to select a TV programme.

26. RETURN

Used to return to a previous menu.

27. ZOOM

Used to enlarges picture .

28. CLEAR

Used to clear a preset TV station.

Used to cancel a preset recording.

Used to cancel a preset mark.

Used to set the tape counter to zero.

Used to resume normal play during repeat

play.

29. MARK

Used to mark a position during playback a

disc.

SEARCH

Used to search for a specific sequence.

30. MODE

REPEAT

Used to allow the repeat play a title, chapter,

track, disc or A-B.

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 8

TV

RF cable

Aerial cable

Aerial

2

3

4

English

- 9

Connecting DVD-VCR to the TV

using the RF Cable

To receive television programmes a signal must

be received from one of the following sources:

• An outdoor aerial.

• An indoor aerial.

• A cable television network.

• A satellite receiver.

1 Remove the aerial or network input cable

from the television.

2 Connect this cable to the 75Ω coaxial jack

marked on the rear of your DVD-VCR.

3 Plug the RF Cable supplied into the jack

on your DVD-VCR.

4 Plug the other end of the RF Cable into the

connector previously used for the aerial on

the television.

TV

• Make sure that both the television and the

DVD-VCR are switched off before connect-

ing the cables.

Note

C

onnections

You can connect your DVD-VCR to the tele-

vision using the Audio/Video cable if the

appropriate input is available on the televi-

sion. You thus:

• Obtain better quality sound and pictures

• Simplify the setting up procedure of your

DVD-VCR

1 Connect the RF Cable.

2 Connect one end of the Audio/Video cable

to the Video output and Audio L, R output

jack on the rear of the DVD-VCR.

3 Plug the other end into the appropriate

connector on the television.

ANT IN

Aerial

Aerial cable

RF cable

Connecting DVD-VCR to the TV

using the Audio/Video Cable

•

Regardless of the type of connection chosen,

you must always connect the RF Cable sup-

plied. Otherwise, no picture will be visible on

the screen when the DVD-VCR is switched off.

• Make sure that both the television and the

DVD-VCR are switched off before connecting

the cables.

Notes

Yellow

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 9

10 -

English

COMPONENT VIDEO IN

COMPONENT INPUT

1

2

COMPONENT VIDEO OUT

Connecting DVD-VCR to the TV

using the Component Video Cable

Your TV must support progressive scan input

to allow you to watch component video output.

You will enjoy high quality accurate colour

reproduction images. Component video seper-

ates the picture element into black and

white(Y), blue(Pb), red(Pr) signals to present

most clear and clean images.

1 Connect Component video cables between

the COMPONENT VIDEO OUT jacks on the

rear of the DVD-VCR and COMPONENT

VIDEO IN jacks on the rear of the TV.

2 Connect audio cables between the AUDIO

LINE OUT jacks on the rear of the DVD-VCR

and AUDIO IN jacks on the rear of the TV.

• Take care to respect the colour coding of

the left and right channels.

To take full advantage of the movie theater

experience that DVD offers, you may want to

connect your DVD-VCR to a complete

Surround Sound system, including an A/V

Receiver and six Surround Sound speakers.

If your A/V receiver is equipped with a Dolby

Digital Decoder, you have the option to bypass

the DVD-VCR’s built-in Dolby Digital Decoder.

Use the Digital Audio Out connection below.

To enjoy Dolby Digital or DTS sound, you must

set up the audio settings. (See page 31)

1 Connect a Digital Audio coaxial/optical cable

from the Digital Audio Out jacks on the panel of

the DVD-VCR to their corresponding Digital

Audio Input jacks on your A/V Receiver:

To Digital Audio Input of an A/V

Receiver with a Dolby, MPEG2, DTS,

Digital Decoder

Connecting to an AV amplifier with

the digital input jack

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 10

English

- 11

This allows you to connect your DVD -VCR to

other external devices and view or record their

outputs.

• Method 1 : Connecting a VCR, Set-Top

Box(STB) or

DVD-VCR to the AUDIO/VIDEO

LINE IN 1 jacks.

• Method 2 : Connecting a Camcorder to the LINE

IN 2

in jacks.

Connecting Extend Device

•

You can also use the LINE IN 2 jacks on the front

panel of the DVD-VCR.

• Copy protected content cannot be recorded.

Notes

Method 1 : Connecting a VCR,

set-top Box (STB) Or DVD-VCR to

the AUDIO/VIDEO LINE IN 1 jacks

Connecting a VCR or external device to

AUDIO/VIDEO LINE IN 1 jacks of the DVD-VCR.

You can record from connected equipment

(VCR, STB or DVD).

You can use the LINE IN 2 jacks on the front

panel of the DVD-VCR. You can record from

connected equipment.

When an input source is inserted into LINE IN 2

while viewing TV, the input will be switched to

LINE IN 2 automatically.

Method 2 : Connecting a

Camcorder to the LINE IN 2

jacks

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 11

12 -

English

6 Check the date and time.

Refer to “Setting the Date and Time” to

change the date and time. (see page: 14)

Plug & Auto Setup

Your DVD-VCR will automatically set itself up

when it is plugged into the mains for the first time.

TV stations will be stored in memory. The

process takes a few minutes. Your DVD-VCR

will then be ready for use.

1 Connect the RF Cable as indicated on page

9. (Connecting Your DVD-VCR to the TV

using the RF Cable)

2 Plug the DVD-VCR into the mains.

• “AUTO” in the front panel display flickers.

3 The Language Set menu is displayed.

4 Press the  or  button to select the

desired language, then press OK button.

Start the auto setup.

5 Start the auto scanning.

The number of stations automatically stored

by the DVD-VCR depends on the number of

stations that it has found.

• Now, you only have to switch the DVD-VCR

on and it is ready for use.

• Function for “Plug & Auto Set Up” is fixed

already. So if you want to change this fixed

one, you can change. (refer to “Presetting the

Stations Manually” page 15).

Notes

Auto Setup will be

started.

Check antenna and TV

cable connection.

Channel Memorizing

Please Wait ....

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

Time Date Year

12 : 00 01 / 01 2007 MON

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

English

Français

Deutsch

Español

Italiano

Nederlands

Language

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

√

êÛÒÒÍËÈ

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 12

English

- 13

Tuning Your Television for the DVD-

VCR

You must tune your television for the DVD-VCR

only if you are using the RF cable.

To view pictures from your DVD-VCR when a

Audio/Video cable is used, the television must

be set to the audio/video mode (AV).

1 Switch on the television.

2 Switch on the DVD-VCR by pressing the

STANDBY/ON on the front of the DVD-

VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television

to be reserved for use with your DVD-VCR.

4 Insert the video cassette in the DVD-VCR.

Check that the DVD-VCR starts reading the

cassette; if not, press the II button.

5 Start a scan on your television or set the tele-

vision to UHF channel 36.

6 Fine tune the television until the pictures and

sound are obtained clearly.

7 When the picture and sound are perfectly

clear, store this channel at the desired

programme position on the television.

That programme is now reserved for use with

your DVD-VCR.

S

ettings

Your DVD-VCR contains a 24-hour clock and

calendar used to:

• Automatically stop programme recording.

• Preset your DVD-VCR to record a programme

automatically.

You must set the date and time when:

• You purchase the DVD-VCR.

• Do not forget to reset the time when you

change clocks from winter to summer time

and vice versa.

1 Press the MENU button, then press the OK or

 button.

2 Press the  or  button to select Clock,

then press the OK or  button.

The Clock Set menu is displayed.

3 Press the ¦ or  button to select the hour,

minutes, day, month, and year. The selected

option is highlighted. Press the  or  button

to set them. The day of the week is displayed

automatically. Press the OK button.

• You can hold down the  or button to

scroll more quickly through the values.

• Press the MENU button to exit the menu.

Setting the Date and Time

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

Time Date Year

12 : 00 01 / 01 2007 MON

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 13

14 -

English

Setting the Menu Language Presetting the Stations

Automatically

1 Press the MENU button, then press the OK or

 button.

2 Press the OK or  button again.

The Language Set menu is displayed.

3 Press the  or  button to select desired

language, then press the OK or  button.

• Press the MENU button to exit the menu.

You do not need to preset the stations if you

have already set them automatically (refer to

“Plug & Auto Set Up” on page 12).

Your DVD-VCR contains a built-in tuner used to

receive television broadcasts.

You must preset the stations received through

the tuner. This can be done:

• Plug & Auto Set up (refer to page 12).

• Automatically.

• Manually (refer to page 15).

You can store up to 80 stations.

1 Press the MENU button, then press the

OK or  button.

2 Press the  or  button to select Install,

then press the OK or  button.

The Install menu is displayed.

3 Press the OK button. A message is displayed,

indicating that any channels already preset on

your DVD-VCR will be deleted.

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Auto Setup



Manual Setup



TV System : G

VCR Output CH : CH 36

English

Français

Deutsch

Español

Italiano

Nederlands

Language

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

√

êÛÒÒÍËÈ

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

Your data will be lost

Press OK to continue

MENU to exit

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 14

English

- 15

4 Press the OK button to start the auto scan-

ning. The message Please Wait is displayed.

• The first frequency band is scanned and

stored, then the DVD-VCR searches for the

second station and so on.

When the automatic scanning procedure

has finished, the DVD-VCR switches

automatically to programme 1.

• If you wish to cancel the auto scanning

before the end, press the MENU button.

• The number of stations automatically stored by the

DVD-VCR depends on the number of stations that

it has found.

• Once the auto scanning procedure has finished,

some stations may have been stored more than

once; select the stations with the best reception

and delete the ones no longer required (refer to

page 16).

Note

Channel Memorizing

Please Wait ....

SETUP

VCR

PROG

FUNC

DVD

OK Return Menu

You do not need to preset the stations manually

if you have already set them automatically.

1 Press the MENU button, then press the OK or

 button.

2 Press the  or  button to select Install,

then press the OK or  button.

The Install menu is displayed.

3 Press the  or  button to select Manual

Setup, then press the OK or  button.

The TV STATION TABLE menu is displayed.

4 Press the  or  button to select the

required programme number.

5 Press the  button to preset the station.

The MANUAL TUNING menu will be dis-

played.

Press the ¦ or  button to start scanning the

channels. The frequency band is scanned and

the first station found is displayed.

Presetting the Stations Manually



SWAPPING : OK

DELETE : CLEAR RETURN

❉ ❉ TV STATION TABLE ❉ ❉

PR CH NAME

1 021

- - - -

2

3

4

5

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Auto Setup



Manual Setup



TV System : G

VCR Output CH : CH 36

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 15

16 -

English

If you have stored a TV station:

• That you do not require

• At the wrong programme position, you can

cancel it.

1 Press the MENU button, then press the OK or

 button.

2 Press the  or  button to select Install,

then press the OK or  button.

The Install menu is displayed.

3 Press the  or button to select Manual

Setup, then press the OK or  button.

The TV STATION TABLE menu is displayed.

4 Press the  or  button to select required

preset TV station.

Press the CLEAR button to delete.

5 Repeat the same procedure from step 4

onwards until all the required stations have

been cleared.

Select a character

in the name.

Move to the next

previous or

character

Press the  or button until the

required character is displayed

(letters, numbers or “-” character).

Press the ¦ or  button

respectively.

To... Then...

Clearing a Preset Station

6 If necessary, press the  or  button to

select MFT, then press the ¦ or  button to

adjust the picture.

7 Press the  or  button to select NAME.

The station name is set automatically from the

broadcast signal.

• To change the programme’s name, press

the  button. The first letter of the name

flashes.

8

If you... Then...

Wish to store the

station displayed

Do not wish to

store the station

displayed

•

Press OK to store the

station.

•

Press the  or button until

the CH is selected.

•

Press the ¦ or  button to

go on scanning the

frequency band and display

the next station.

9 Repeat this procedure from step 4 onwards,

until all the required stations have been

stored.

10 Press the MENU button to exit the menu.



SWAPPING : OK

DELETE : CLEAR RETURN

❉ ❉ TV STATION TABLE ❉ ❉

PR CH NAME

1 021

- - - -

2

3

4

5

¦¦

MEMORY : OK

RETURN

❉ ❉ MANUAL TUNING. ❉ ❉

PR : 1

CH : 021

MFT : -

NAME : - - - -

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 16

English

- 17

Changing the Preset Station Table

You can rearrange the station table and give

different programme numbers to the stations

listed according to your own preferences.

1 Press the MENU button, then press the OK or

 button.

2 Press the  or  button to select Install,

then press the OK or  button. The Install

menu is displayed.

3 Press the  or button to Select Manual

Setup, then press the OK or  button.

The TV STATION TABLE menu is displayed.

4 Press the  or  button to select required

preset TV station. The selected station is dis-

played at the same time on the television

screen.

5 Press the OK button to change the

programme number assigned to a station.



SWAPPING : OK

DELETE : CLEAR RETURN

❉ ❉ TV STATION TABLE ❉ ❉

PR CH NAME

1 021

- - - -

2

3

4

5

6 Press the  or  button to select required

position, then press the OK button to swap

the position.

For example to move a TV station in

programme 1 to programme 3.

• Press the MENU button to exit the menu.



SWAPPING : OK

DELETE : CLEAR RETURN

❉ ❉ TV STATION TABLE ❉ ❉

PR CH NAME

1

2

3 021

- - - -

4

5

You can choose the sound mode (B/G or D/K)

according to the TV set connected to your VCR.

1 Press the MENU button, then press the OK

or  button.

2 Press the  or  button to select Install,

then press the OK or  button. The Install

menu is displayed.

3 Press the  or button to select TV

System, then press the OK or  button to

select G or K.

• Press the MENU button to exit the menu.

Selecting the RF OUT Sound Mode

(B/G-D/K)

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Auto Setup



Manual Setup



TV System : G

VCR Output CH : CH 36

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Auto Setup



Manual Setup



TV System : G

VCR Output CH : CH 36

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 17

18 -

English

Setting the VCR Output Channel

Your DVD-VCR output channel may need to be

changed if the pictures suffer from interference

or if your TV cannot find the pictures.

1 Press the MENU button, then press the OK

or  button.

2 Press the  or  button to select Install,

then press the OK or  button. The Install

menu is displayed.

3 Press the  or button to select VCR

Output CH.

4 Press the OK or ¦ or  button to select the

required output channel (CH21~CH69).

➝ CH21 ➝ ..CH36 ➝ ..CH69

• Press the MENU button to exit the menu.

Then tune your television again (see

page 13).

• You can select the required output channel

directly by using the number button.

Before recording or playing back a cassette,

you can select the required system standard.

Otherwise, the system automatically selects the

reception standard when you select AUTO.

• When playing back a cassette, the standard is

automatically selected by the DVD-VCR.

• When you playback an NTSC-recorded tape

on this DVD-VCR make a setting on the colour

system according to your TV. If your TV is a

PAL system only TV, set NTPB. If your TV is

multi system TV (NTSC 4.43 compatible), set

NT4.43 and you can record NT4.43.

1 Press the MENU button, then press the OK

or  button.

2 Press the  or  button to select User Set,

then press the OK or  button.

The User Set menu is displayed.

3 Press the OK or button to select required

colour system. Auto ➝ PAL ➝ SECAM ➝

MESECAM ➝ B/W

• Auto: When playing back a cassette,

the system standard is automatically

selected by the DVD-VCR.

• B/W: Black and White.

Selecting the Colour Mode

V

CR

F

unctions

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Colour System : Auto

NICAM : On

IPC : On

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Auto Setup



Manual Setup



TV System : G

VCR Output CH : CH 36

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 18

English

- 19

NICAM programmes are divided into 3 types.

NICAM Stereo, NICAM Mono and Bilingual (trans-

mission in another language).

NICAM programmes are always accompanied by a

standard mono sound broadcast and you can

select the desired sound. Please refer to page 28.

1 Press the MENU button, then press the OK or

 button.

2 Press the  or  button to select User Set,

then Press the OK or  button.

The User Set menu is displayed.

3 Press the  or  button to select NICAM, then

press the OK or  button to select On or Off.

• On (for NICAM mode):

Normally set at this position

• Off (for MONO mode):

Only set at this position to record the standard

mono sound during a NICAM broadcast if the

stereo sound is distorted due to inferior

reception conditions.

NICAM

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Colour System : Auto

NICAM : On

IPC : On

Intelligent Picture Control

This feature allows you to adjust the sharpness

of the image automatically, according to your

own preferences.

1 During playback, press the MENU button,

then press the OK or  button.

2 Press the  or  button to select User Set,

then press the OK or  button.

The User Set menu is displayed.

3 Press the  or  button to select IPC

(Intelligent Picture Control), then press the OK

or  button.

• You can select the modes simply by press-

ing the IPC button.

4 To adjust the sharpness manually, press the

 button to turn the IPC mode OFF.

The sharpness of the picture is adjusted

manually.

Press the ¦ or  buttons until the picture is

displayed according to your preferences.

❉ ❉ PICTURE ❉ ❉

IPC : OFF

SOFTEN SHARPEN

ON/OFF :



❉

OK

SETUP

VCR

PROG

FUNC

DVD

Return Menu

Colour System : Auto

NICAM : On

IPC : On

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 19

20 -

English

Auto Power Off

This feature automatically turns off your DVD-

VCR if no signal is received and you do not

press any button for the selected time.

1 Press the MENU button, press the OK or 

button.

2 Press the  or  button to select Auto

Power Off.

3 Press the OK or  button to select the

preset interval.

➝ Off ➝ 1 Hour ➝ 2 Hour ➝ 3 Hour

• Press the MENU button to exit the menu.

Screen Messages

Your DVD-VCR displays most information both

the DVD-VCR and the television.

You can choose to display or hide this information

on the television screen (If you configure the

Screen Message to Off, the Fast Forward and

Rewind messages will not be displayed on the

screen. However, the Search Message will not be

displayed on the screen regardless of the Screen

Message configuration).

1 Press the MENU button, then press the OK or

 button.

2 Press the  or  button to select Screen

Messages.

3 Press the OK or  button to select On or Off.

• On : Select to display on-screen information.

• Off : Select to hide on-screen information.

• Press the MENU button to exit the menu.

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

OK

SETUP

VCR

PROG

FUNC

DVD

Language



Clock



Install



User Set



Auto Power Off : Off

Screen Messages : On

Return Menu

00000X_V6800_AFR_Eng 4/11/08 9:49 AM Page 20

La page charge ...

Samsung DVD-V6800 Manuel utilisateur

Samsung DVD-V6800 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents