Sauder Mates Bed 423003 Mode d'emploi

sauder.com

Mates Bed

Model 423003

NOTE: THIS INSTRUCTION

BOOKLET CONTAINS IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR

FUTURE REFERENCE.

English pg 1-20

Français pg 21-23

Español pg 24-26

Lot # 531291 07/17/19

Purchased: __________________

sauder.com

CONTACT US FIRST

BEFORE MAKING ANY RETURNS TO THE STORE.

Share your journey!

sauder.com

CONTACT US FIRST

BEFORE MAKING ANY RETURNS TO THE STORE.

Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.

Prefer the phone? Give us a ring at

1-800-523-3987.

Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)

WARNING

CHOKING HAZARD - Small Parts

Not for children under 3 years.

Adult assembly required.

Hammer

Not actual size

No. 2 Phillips Screwdriver

Tip Shown Actual Size

Skip the power trip.

This time.

Table of Contents Assembly Tools Required

Part Identiﬁ cation

Hardware Identiﬁ cation

Assembly Steps

Français

Español

Warranty

3

4

5-20

21-23

24-26

27

423003 www.sauder.com/servicePage 2

å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge

to help distinguish similar parts from each other. Use this part identiﬁ cation to help identify similar parts.

Part Identiﬁ cation

Now you know

our ABCs.

A2 BOTTOM (2)

B HEADBOARD/FOOTBOARD (2)

B30 DRAWER BOTTOM (2)

C BACK PANEL (1)

D CENTER SUPPORT (1)

D212 RIGHT DRAWER SIDE (2)

D213 LEFT DRAWER SIDE (2)

D476 DRAWER BACK (2)

E UPPER RAIL (1)

F LOWER RAIL (1)

G CLEAT (6)

H RIGHT DRAWER FRONT (1)

J LEFT DRAWER FRONT (1)

M65

DRAWER BRACE (2)

(Hidden part using recycled

material. Color may vary.)

A2

B

B30

C

G

D212

D476

D212

D213

M65

H

J

E

F

423003www.sauder.com/service

Page 3

D

å Screws are shown actual size. You may receive extra hardware with your unit.

Hardware Identiﬁ cation

BLACK 1-1/8" PAN HEAD SCREW - 18

9S

BLACK 9/16" LARGE HEAD SCREW - 10

1S

SILVER 1/4" MACHINE SCREW - 4

61S

SUPPORT

BRACKET - 1

11B

3S

GOLD 5/16" FLAT HEAD SCREW - 16

12E

TACK GLIDE - 12 WOOD DOWEL - 8

15F

HIDDEN CAM - 16

1F

CAM DOWEL - 16

2F

BLACK 1-1/2" FLAT HEAD SCREW - 10

101S

GLUE - 1

54M

30S

BLACK 1-9/16" FLAT HEAD SCREW - 10

BROWN PLASTIC

WASHER - 4

151M

40DA

UNIVERSAL CABINET RAIL - 4

40DC

DRAWER RIGHT - 2

40DD

DRAWER LEFT - 2

PULL - 2

149K

423003 www.sauder.com/servicePage 4

DRAWER FRONT BRACKET - 2

8G

Step 1

Look for this icon. It means a

video assembly tip is available at

www.sauder.com/service/tips

å

Assemble your unit on a carpeted ﬂ oor or on the empty

carton to avoid scratching your unit or the ﬂ oor.

å

Push sixteen HIDDEN CAMS (1F) into the BACK

PANEL (C), CENTER SUPPORT (D), RAILS (E and F) and

DRAWER BRACES (M65). Then, insert the metal end of a

CAM DOWEL (2F) into each HIDDEN CAM.

423003www.sauder.com/service

Page 5

C

D

E

F

M65

Insert the metal end of the CAM

DOWEL into the HIDDEN CAM.

Arrow

1F

2F

(16 used)

Do not tighten the HIDDEN CAMS in this step.

å

Fasten two UNIVERSAL CABINET RAILS* (40DA) to the

HEADBOARD/FOOTBOARDS (B) exactly as shown. Use

four GOLD 5/16" FLAT HEAD SCREWS (3S) through

holes #1 and #3.

å

*patent pending glide system

Step 2

423003 www.sauder.com/servicePage 6

VIEW THE DRAWER GLIDE VIDEO

GOLD 5/16" FLAT HEAD SCREW

(4 used in this step)

3S

Glide end

3

2

1

2

3

4

Rounded edge

A tracking label will be

on one of these surfaces.

Please do not remove.

B

Remember:

Righty tighty.

Lefty loosey.

å

Fasten the remaining UNIVERSAL CABINET RAILS* (40DA) to each

surface of the CENTER SUPPORT (D) exactly as shown. Use four

GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.

å

Fasten the SUPPORT BRACKET (11B) to the CENTER SUPPORT (D).

Use two BLACK 9/16" LARGE HEAD SCREWS (1S).

å

NOTE: Position the BRACKET exactly as shown.

Step 3

423003www.sauder.com/service

Page 7

VIEW THE DRAWER GLIDE VIDEO

Glide end

1

2

3

4

11B

1

2

3

4

D

BLACK 9/16" LARGE HEAD SCREW

(2 used in this step)

1S

GOLD 5/16" FLAT HEAD SCREW

(4 used in this step)

3S

å

With a hammer, tap twelve TACK GLIDES (12E) into the

long edges of the HEADBOARD/FOOTBOARDS (B),

BACK PANEL (C), CENTER SUPPORT (D), and

LOWER RAIL (F).

Step 4

423003 www.sauder.com/servicePage 8

Unﬁ nished edge

This SUPPORT

BRACKET must be here.

12E

B

C

D

F

Step 5

423003www.sauder.com/service

Page 9

Fill the holes 1/4 to 1/2 full with GLUE.

Inspect the parts thoroughly before

assembling. Disassembly of glued

parts is extremely di cult.

Caution

!

54M

15F

å

First, ﬁ ll the center holes in the short edges of the BACK PANEL (C) 1/4

to 1/2 full with GLUE (54M). Then, insert two WOOD DOWELS (15F)

into the holes. Wipe away the excess GLUE.

å

Now, ﬁ ll the hole in the HEADBOARD/FOOTBOARD (B) 1/4 to 1/2

full with GLUE. Fasten the HEADBOARD/FOOTBOARD (B) to the

BACK PANEL (C). Tighten two HIDDEN CAMS. Wipe away the

excess glue.

å

NOTE: Be sure the WOOD DOWEL in the BACK PANEL inserts into

the hole in the HEADBOARD/FOOTBOARD.

Surface with

HIDDEN CAMS

The CABINET RAIL

should be here.

Rounded edge

B

C

Step 6

423003 www.sauder.com/servicePage 10

Fill the holes 1/4 to 1/2 full with GLUE.

Inspect the parts thoroughly before

assembling. Disassembly of glued

parts is extremely di cult.

Caution

!

54M

15F

å

First, ﬁ ll the holes in the short edges of the CENTER

SUPPORT (D) 1/4 to 1/2 full with GLUE (54M). Then,

insert two WOOD DOWELS (15F) into the holes. Wipe

away the excess GLUE.

å

Now, ﬁ ll the center hole in the BACK PANEL (C) 1/4 to 1/2

full with GLUE. Fasten the CENTER SUPPORT (D) to the

BACK PANEL (C). Tighten two HIDDEN CAMS. Wipe away

the excess GLUE.

å

NOTE: Be sure the WOOD DOWEL in the CENTER

SUPPORT inserts into the hole in the BACK PANEL.

Surface with HIDDEN CAMS

D

C

The CABINET RAIL

should be here.

å

First, ﬁ ll the holes in the short edges of the LOWER RAIL (F)

1/4 to 1/2 full with GLUE (54M). Then, insert two WOOD

DOWELS (15F) into the holes. Wipe away the excess GLUE.

å

Now, ﬁ ll the hole in the HEADBOARD/FOOTBOARD (B) and

the hole closest to the ﬁ nished edge in the back surface of

the LOWER RAIL (F) 1/4 to 1/2 full with GLUE. Fasten the

LOWER RAIL (F) to the HEADBOARD/FOOTBOARD (B) and

CENTER SUPPORT (D). Tighten two HIDDEN CAMS. Wipe

away the excess GLUE.

å

NOTE: Be sure the WOOD DOWEL in the RAIL inserts into

the hole in the HEADBOARD/FOOTBOARD.

Step 7

423003www.sauder.com/service

Page 11

D

Fill the holes 1/4 to 1/2 full with GLUE.

Inspect the parts thoroughly before

assembling. Disassembly of glued

parts is extremely di cult.

Caution

!

F

54M

15F

Surface without HIDDEN CAMS

B

Tighten the HIDDEN CAM

Finished edge

Step 8

423003 www.sauder.com/servicePage 12

E

15F

Rounded edge

Surface without HIDDEN CAMS

The UPPER RAIL will rest on

the SUPPORT BRACKET.

15F

å

First, ﬁ ll the holes in the short edges of the UPPER RAIL (E)

1/4 to 1/2 full with GLUE (54M). Then, insert two WOOD

DOWELS (15F) into the holes. Wipe away the excess GLUE.

å

Now, ﬁ ll the hole in the HEADBOARD/FOOTBOARD (B)

1/4 to 1/2 full with GLUE. Fasten the UPPER RAIL (E) to the

HEADBOARD/FOOTBOARD (B) and CENTER SUPPORT (D).

Tighten two HIDDEN CAMS. Wipe away the excess GLUE.

å

NOTE: Be sure the WOOD DOWEL in the RAIL inserts into

the hole in the HEADBOARD/FOOTBOARD.

B

Tighten the HIDDEN CAM

Fill the holes 1/4 to 1/2 full with GLUE.

Inspect the parts thoroughly before

assembling. Disassembly of glued

parts is extremely di cult.

Caution

!

D

54M

Step

å

First, ﬁ ll the holes in the remaining HEADBOARD/

FOOTBOARD (B) 1/4 to 1/2 full with GLUE (54M).

Drop glue into the exact holes shown to the right.

å

Fasten the HEADBOARD/FOOTBOARD (B) to the

BACK PANEL (C) and RAILS (E and F). Tighten ﬁ ve

HIDDEN CAMS. Wipe away the excess GLUE.

å

NOTE: Be sure the WOOD DOWELS in the BACK

PANEL and RAILS inserts into the holes in the

HEADBOARD/FOOTBOARD.

Step 9

423003www.sauder.com/service

Page 13

E

F

54M

B

C

Rounded edge

Fill the holes 1/4 to 1/2 full with GLUE.

Surface without holes

Surface with holes

Step

å

Fasten four CLEATS (G) to the BACK PANEL (C)

and UPPER RAIL (E). Use twelve BLACK 1-1/8" PAN

HEAD SCREWS (9S).

Step 10

423003 www.sauder.com/servicePage 14

9S

BLACK 1-1/8" PAN HEAD SCREW

(12 used in this step)

G

C

E

å

Fasten the remaining CLEATS (G) to the HEADBOARD/

FOOTBOARDS (B). Use six BLACK 1-1/8" PAN

HEAD SCREWS (9S).

Step 11

423003www.sauder.com/service

Page 15

9S

BLACK 1-1/8" PAN HEAD SCREW

(6 used in this step)

G

B

Don't worry. It isn't

Rome. This can be built

in a day.

Step 12

423003 www.sauder.com/servicePage 16

VIEW THE T-SLOT BOX VIDEO

1

3

2

4

Push down

å

Pull the DRAWER FRONT BRACKETS (8G) apart and slide them

into the grooves in the DRAWER SIDES (D212 and D213). You

may need to gently tap them in with a hammer.

å

NOTE: The DRAWER FRONT BRACKETS are marked "RH" and

"LH" for easy identiﬁ cation.

å

Fasten the RIGHT DRAWER FRONT (H) to the DRAWER FRONT

BRACKETS (8G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).

å

Slide the DRAWER BOTTOM (B30) into the grooves

in the DRAWER SIDES (D212 and D213) and

RIGHT DRAWER FRONT (H).

å

Fasten the DRAWER BRACE (M65) to the RIGHT DRAWER

FRONT (H). Tighten one HIDDEN CAM.

å

Fasten the DRAWER BACK (D476) to the DRAWER

SIDES (D212 and D213) and DRAWER BRACE (M65).

Use ﬁ ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).

å

Repeat this step for the other drawer using the LEFT

DRAWER FRONT (J).

BLACK 9/16" LARGE HEAD SCREW

(8 used in this step)

1S

D212

D213

D212

D476

D213

D212

D213

H

Be sure the DRAWER

BOTTOM inserts into the

DRAWER FRONT groove.

Be sure the

DRAWER

BOTTOM

inserts into

the DRAWER

BACK groove.

With the palm of your hand,

tap the DRAWER BOTTOM

down into the groove.

30S

Start each screw a few turns before

completely tightening any of them.

BLACK 1-9/16" FLAT HEAD SCREW

(10 used in this step)

Unﬁ nished surface

Surface with

HIDDEN CAM

B30

H

M65

8G

Hidden part using

recycled material.

Color may vary.

423003www.sauder.com/service

Page 17

Step 13

D213

D212

GOLD 5/16" FLAT HEAD SCREW

(8 used in this step)

3S

VIEW THE DRAWER GLIDE VIDEO

å

Fasten a DRAWER RIGHT (40DC) to the RIGHT DRAWER

SIDE (D212) and a DRAWER LEFT (40DD) to the LEFT

DRAWER SIDE (D213). Use four GOLD 5/16" FLAT HEAD

SCREWS (3S) through holes #1 and #2.

å

NOTE: The glides are not intended to rotate.

å

Fasten a PULL (149K) to the RIGHT DRAWER FRONT (H).

Use two SILVER 1/4" MACHINE SCREWS (61S) and two

BROWN PLASTIC WASHERS (151M).

å

Repeat this step for the LEFT DRAWER.

1

2

1

2

Glide end

H

151M

149K

SILVER 1/4" MACHINE SCREW

(4 used in this step)

61S

These holes will not be used.

å

If you purchased the 422892 Headboard, assemble that

unit now. The Headboard attachment will be shown in the

422892 Headboard instruction book.

å

NOTE: The diagrams below show the 422892 Headboard

on the left or right of this Platform Bed.

Step 14

423003 www.sauder.com/servicePage 18

422892 HEADBOARD on the right

422892 HEADBOARD on the left

å

Fasten the BOTTOMS (A2) to the CLEATS (G). Use ten

BLACK 1-1/2" FLAT HEAD SCREWS (101S).

Step 15

423003www.sauder.com/service

Page 19

G

BLACK 1-1/2" FLAT HEAD SCREW

(10 used in this step)

101S

A2

Almost time to

celebrate! With a nap.

Step 16

423003 www.sauder.com/servicePage 20

å

To insert the drawers into your unit, tip the front of the drawer down and drop the glides on the

drawer behind the glides on the unit. Lift the front of the drawer up and slide it into the unit.

å

To make adjustments to the drawer, loosen the SCREWS in the DRAWER FRONT BRACKETS,

make needed adjustments, and tighten the SCREWS.

å

This completes assembly. Clean with a damp cloth. Wipe dry.

Place the glide on the SLIDE

behind the glide on the RAIL.

J

25 lbs.

H

And to celebrate, why not share your success story at Walmart.com or

La page est en cours de chargement...

Sauder Mates Bed 423003 Mode d'emploi

Sauder Mates Bed 423003 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents