Joy CPA307H Mode d'emploi

CPA307H
Marque
Joy
Modèle
CPA307H
Taper
Mode d'emploi
User’s Guide
extreme
for iPhone 12
extreme
for iPhone 12
support@thejoyfactory.com
(949) 216-8888
Contact us Monday through Friday,
9:00 a.m. to 5:00 p.m. (PST)
Certification
Marking Warnings &
Conditions of Use
North American Certification Warning
and Condition of Use
Warning – EXPLOSION HAZARD. DO NOT CONNECT
OR DISCONNECT WHEN ENERGIZED. All ports must
be fully closed while in a known hazardous area. No
other equipment shall be connected to the device while
in the hazardous area. Device shall not be charged while
in a hazardous area. Enclosure must never be opened
to remove device.
Attention – RISQUE D’EXPLOSION. NE PAS
BRANCHER NI DÉBRANCHER SOUS TENSION. Tous
les ports doivent être complétement fermés dans une
zone dangereuse connue. Aucun autre équipement ne
doit être connecté à l’appareil dans la zone dangereuse.
L’appareil ne doit pas être chargé dans une zone
dangereuse. Le boîtier ne doit jamais être ouvert pour
retirer le périphérique.
ATEX Certification Warning and
Condition of Use
WARNING - EXPLOSION HAZARD. DO NOT
CONNECT OR DISCONNECT WHEN ENERGIZED
WARNING – ALL PORTS MUST BE FULLY CLOSED
WHILE IN A KNOWN HAZARDOUS AREA. NO OTHER
EQUIPMENT SHALL BE CONNECTED TO THE
DEVICE WHILE IN THE HAZARDOUS AREA. DEVICE
SHALL NOT BE CHARGED WHILE IN A HAZARDOUS
AREA. ENCLOSURE MUST NEVER BE OPENED TO
REMOVE DEVICE.
WARNING - DO NOT OPEN WHEN AN EXPLOSIVE
ATMOSPHERE IS PRESENT
SPECIFIC CONDITION OF USE - THE
ENVIRONMENT OF DEPLOYMENT MUST HAVE
CONTROLLED TEMPERATURE AND HUMIDITY TO
AVOID BUILDING OF STATIC CHARGE.
1
2
3
5
4
6
7
8
9
10
16
11
12
13
14
15
Case Specifications
1. Reinforced corners to absorb and divert shock
2. Rear facing camera lens cover
3. Raised edges for extra lens and screen protection
4. Molded-in buttons
5. Robust outer shell provides hazardous location
protection
6. 9H PET screen protector
7. Textured edges for extra grip
8. MagSafe and Qi wireless charging compatibility
9. Fully enclosed IP55 liquid and dust particle rating
10. Lightning connector cover
11. Accessory port for lanyard or carrying strap
12. Asset tag compatibility
13. Includes harness with build-in belt clip and
kickstand
14. Volume up/down button covers
15. Ring/Silent toggle switch
16. Ambient light sensor compatibility
This Disclaimer applies to The Joy Factory Inc.’s aXtion® Extreme Class I and Class II, Div. 2,
Class III Div. 1 & 2, ATEX Zone 2 with MIL-STD-810H Military Grade and IP68 Waterproof Certified
Cases (the “Case” or the “aXtion Extreme Case”).
INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY. IMPROPER USE OF THE CASE COULD BE
DETRIMENTAL.
This aXtion Extreme Case is designed only for the specific tablet listed on the box containing the Case.
Thus, the Case is only intended for and only warrantied for proper use with that specific tablet and not for
use with another device type. Because different generations of tablets have different specifications, please
refer to the packaging for your aXtion Extreme Case to determine whether your tablet will be compatible
with the aXtion Extreme Case you have purchased.
Do not use the aXtion Extreme Case if it is damaged or not functioning properly for any reason
CERTIFICATIONS
aXtion Extreme Cases are Class I and Class II, Div. 2, Class III Div. 1 & 2, ATEX Zone 2 certified, meaning
they are approved for usage in hazardous locations which require these certifications. Please refer to the
certification label on the case and/or the product page on The Joy Factory website for the specific
certifications. The certified Case and tablet solution is installed in The Joy Factory Inc’s certified labs and is
verified with a tamperproof label. If the tamperproof label is removed then the solution is void. The Case’s
label should be inspected upon deployment and periodically while in-use. When the tamperproof label is
intact, the Case provides protection to tablets in environments where explosion or fire hazards exist due to
the presence of flammable gases, flammable or combustible liquid-produced vapors, combustible dusts,
or ignitable fibers or flying materials All aXtion Extreme Cases are certified IP68 waterproof. The IP68 rating
means that the aXtion Extreme Case is certified as “dust and watertight” (that is, no dust or water will enter
the Case when it is properly installed and used). All aXtion Extreme Cases are also designed to be shock
resistant and can physically and functionally withstand infrequent, non-repetitive shocks encountered in
various environments.
NO ALTERATIONS
Any alteration to your aXtion Extreme case is prohibited and will not be covered under any of the following
certifications: Class I and Class II, Div. 2, Class III Div. 1 & 2, ATEX Zone 2 with MIL-STD-810H Military Grade
and IP68 Waterproof. In addition, any alterations will void all warranties, for the Case. The Joy Factory Inc.
disclaims any and all liability for damages arising from use of an altered aXtion Extreme case.
NOTE: Removal of the device from the aXtion Extreme Case breaks the tamperproof label thus voiding all
certifications. The Joy Factory Inc. disclaims all liability and all warranties, whether expressed or implied, in
situations where the Case is mishandled.
EXPRESS WARRANTY
The Case is covered under a one-year manufacturing warranty from the date of purchase and can be
replaced free of charge for any manufacturing defects. If you believe the Case has a manufacturing defect,
cease use immediately and contact The Joy Factory Inc. by email at support@thejoyfactory.com or by
telephone at (949) 216-8888, Monday through Friday, 9:00 a.m. to 5:00 p.m., Pacific Standard Time. The
Joy Factory Inc. will only replace a Case that has a manufacturing defect. The Joy Factory is not liable to
replace or pay for replacement of your device or any additional items which may be damaged from use of
a Case with manufacturing defects or the use of the Case with other cases and bumpers.
WARRANTY DISCLAIMER
EXCEPT TO THE EXTENT SET FORTH IN THE EXPRESS WARRANTY ABOVE AND AS PERMITTED BY
LAW, THE JOY FACTORY INC. PROVIDES THE CASES ON AN “AS IS” BASIS, AND DISCLAIMS ALL
WARRANTIES AND CONDITIONS WITH RESPECT TO THE CASES, WHETHER ORAL, WRITTEN,
STATUTORY, OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
The Joy Factory Inc. does not provide a warranty for the tablet computer installed into the aXtion Extreme
Case.
LIMITATION OF LIABILITY
IN ADDITION TO THE ABOVE WARRANTY DISCLAIMER, TO THE MAXIMUM EXTENT PERMITTED BY
LAW, IN NO EVENT WILL: (A) THE JOY FACTORY, INC., ITS PARTNERS, OFFICERS, DIRECTORS,
AGENTS, EMPLOYEES, AFFILIATES, PARENTS, SUCCESSORS, ASSIGNS, LICENSORS, SUPPLIERS,
AND RESELLERS (COLLECTIVELY, “THE JOY FACTORY PARTIES”) BE LIABLE FOR ANY CONSEQUEN-
TIAL, EXEMPLARY, SPECIAL, OR INCIDENTAL DAMAGES, INCLUDING ANY DAMAGES FOR PERSONAL
INJURY OR LOST DATA, PROFITS, EQUIPMENT OR PROPERTY, ARISING FROM OR RELATING TO THE
CASES, EVEN IF THE JOY FACTORY PARTIES KNEW OF, SHOULD HAVE KNOWN OF, OR WERE
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; AND (B) THE TOTAL CUMULATIVE LIABILITY OF
THE JOY FACTORY PARTIES ARISING FROM OR
RELATED TO THE CASES, WHETHER IN CONTRACT, TORT OR OTHERWISE, EXCEED THE AMOUNT
OF $100.00. THIS LIMITATION APPLIES NO MATTER HOW MANY CASES YOU OWN, AND WILL NOT BE
INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR CLAIM.
CALIFORNIA PROPOSITION 65 NOTICE
The State of California requires that all manufacturers notify their consumers of certain chemicals that may
be found in their products, even if the amount is very slight. This is so because, if ingested, exposure to
these chemicals could contribute to higher risks of cancer or birth defects. The general Proposition 65
notice is as follows:
WARNING: This product contains a chemical known to the State of California to cause cancer, birth
defects or other reproductive harm. All of The Joy Factory Inc.’s Cases are safe and are required to meet
applicable federal health and safety standards. A variety of products on the market today contain safe levels
of these chemicals, and when used as intended, do not expose the consumer to any greater risks.
For more information on California’s Proposition 65, please see: https://oehha.ca.gov/proposi-
tion-65/law/proposition-65-law-and-regulations
1. Label: Check the certification label to
ensure the case is certified for your
work environment, and the tamper
proof label is not missing or appears
to be tampered.
2. Case Body: Inspect the case and
ensure there is no damage such as
cracks, or missing parts.
3. Screen Protector and Camera Lens
Cover: Ensure the screen and lens
cover have no crack and is firmly
adhered to the case.
4. Port Cover: Ensure all port covers are
completely closed.
5. Do not attempt to remove the screws
and open the case, doing so will void
the HazLoc certification and warranty.
Inspections before
entering the hazardous
environment:
Very Important: Label Inspection
This hazardous location certified solution is
void if the tamperproof label is broken or
appears tampered.
Due to the nature of hazardous locations this case and phone
solution will be utilized in, its imperative to ensure the install
tamperproof label is fully intact and shows no signs of
tampering. If at any time the tamperproof label is missing or
appears to be tampered, whether it is during initial deployment
or during regular usage, place the case out of service and
contact your authorized reseller.
Charging your iPhone
This case with the phone cannot be charged anywhere in a
hazardous environment. When in a safe environment free from
explosive vapors, particles and debris the device can either by
wired through USB-C or
by wireless through
Apple MagSafe/Qi
charging devices.
Upward
45-degree
motion
Wired
charging
Wireless charging
Holster dismoutning
Lift the top clip and pull the case in an upward 45-degree
motion.
Holster mounting
The case fits inside the holster both front and back facing. Slide
the case into the holster in a downward 45-degree motion until
you hear an audible click.
Features
The included holster functions as a belt clip and
kickstand.
Downward
45-degree
motion
Push to release kickstand
Lanyard not included
Belt Clip
Kickstand
Lanyard
A lanyard port is
available for an
optional accessory.
Beware
Hazardous Area
  • Page 1 1
  • Page 2 2

Joy CPA307H Mode d'emploi

CPA307H
Marque
Joy
Modèle
CPA307H
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents