Sony CDP-CX220 Le manuel du propriétaire

3-862-563-21 (1)

 1998 by Sony Corporation

CDP-CX240

CDP-CX220

Compact Disc

Player

EN

F

ES

P

Operating Instructions

Mode d’emploi

Manual de instrucciones

2

EN

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual are for

models CDP-CX240 and CDP-CX220.

The CDP-CX240 is the model used for

illustration purposes.

Any difference in operation is clearly

indicated in the text, for example,

“CDP-CX240 only.”

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or

similar names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

This equipment is intended for home

entertainment purposes only. The

warranty shall be invalidated if used

in commercial environments, such as

by disc jockeys, etc., even within the

Warranty Period.

WARNING

To prevent fire or shock

hazard, do not expose the unit

to rain or moisture.

To avoid electrical shock, do

not open the cabinet. Refer

servicing to qualified

personnel only.

The laser component in this product

is capable of emitting radiation

exceeding the limit for Class 1.

This appliance is classified as a CLASS 1

LASER product. The CLASS 1 LASER

PRODUCT MARKING is located on the

rear exterior.

The following caution label is located

inside of the unit.

WARNING

To prevent shock hazard, do not insert

the plug cut off from the mains lead into

a socket outlet. This plug cannot be used

and should be destroyed.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK,

DO NOT USE THIS POLARIZED AC

PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO

PREVENT BLADE EXPOSURE.

EN

3

EN

TABLE OF CONTENTS

Getting Started

Unpacking............................................................................................................................ 4

Hooking Up the System..................................................................................................... 4

Connecting Another CD Player (CDP-CX240 only) ...................................................... 6

Inserting CDs....................................................................................................................... 7

Playing a CD......................................................................................................................... 10

Playing CDs

Using the Display ............................................................................................................ 12

Locating a Specific Disc .................................................................................................. 13

Specifying the Next Disc to Play ................................................................................... 15

Locating a Specific Track or a Point in a Track ............................................................ 15

Playing Repeatedly........................................................................................................... 16

Playing in Random Order (Shuffle Play) ...................................................................... 16

Creating Your Own Program (Program Play).............................................................. 17

Playing Using a Timer (CDP-CX240 only) .................................................................... 19

Controlling Another CD Player (Advanced Mega Control) (CDP-CX240 only)..... 20

Fading In or Out (CDP-CX240 only).............................................................................. 21

Playing Alternately (No-Delay Play/X-Fade Play) (CDP-CX240 only) ................... 22

Storing Information About CDs (Custom Files)

What You Can Do With the Custom Files .................................................................... 23

Labeling Discs (Disc Memo)............................................................................................ 23

Storing Custom File Information Using a keyboard (CDP-CX240 only).................. 26

Storing Specific Tracks (Delete Bank) ............................................................................ 26

Grouping Discs (Group File)........................................................................................... 27

Storing Your Favorite Tracks (Hit List) (CDP-CX240 only) ....................................... 28

Additional Information

Precautions ........................................................................................................................ 30

Notes on CDs..................................................................................................................... 30

Troubleshooting ................................................................................................................ 31

Specifications ..................................................................................................................... 31

Index.......................................................................................................................................... 32

Getting Started

4

EN

Getting Started

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

Unpacking

Check that you received the following items:

• Audio cord (1)

• Monaural (2P) mini-plug cord (connecting cord for

CONTROL A1) (1) (supplied for Canadian models

only)

• Remote commander (remote) (1)

• Sony SUM-3 (NS) batteries (2)

• CD booklet holders (2) and label (1)

How to use the CD booklet holder

The CD booklet holder helps you locate the disc easily.

After you have inserted discs into the player, you can put

the CD booklet (which comes with a CD) into the

supplied holder. Put two CD booklets facing back to back

into a pocket. Stick the number label on each pocket,

matching the number of the disc slot where you have

inserted the disc. You can put up to 200 CD booklets into

the holders.

Inserting batteries into the remote

You can control the player using the supplied remote.

Insert two size AA (R6) batteries by matching the +

and – on the batteries to the diagram inside the battery

compartment.

Insert the negative (–) end first, then push in and down

until the positive (+) end clicks into position.

When using the remote, point it at the remote sensor g

on the player.

What cords will I need?

Audio cord (1) (supplied)

White

(L)

Red

(R)

White

(L)

Red

(R)

When to replace batteries

With normal use, the batteries should last for about six

months. When the remote no longer operates the player,

replace all the batteries with new ones.

Notes

• Do not leave the remote near an extremely hot or humid

place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you do not use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

CD player

DIGITAL OUT

(OPTICAL)

COMMAND

MODE

S-LINK/

CONTROL A1

Amplifier

To line output (L)

To line output (R)

To an AC outlet

: Signal flow

To audio input

To an AC outlet

Playing CDsGetting Started

Getting Started

5

EN

Hookups

When connecting the audio cord, be sure to match the

color-coded cord to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

CD player

Amplifier

• If you have a digital component such as a digital

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using an optical cable (not supplied). Take off the

cap and plug in the optical cable.

POC-15

Optical cable (not supplied)

CD player

Digital component

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software

other than music, such as a CD-ROM.

If you have a Sony component with the CONTROL A1

jack

Connect the component via the CONTROL A1 jack. You

can simplify the operation of audio systems composed of

separate Sony components. For details, refer to the

supplementary “S-Link

TM

/CONTROL-A1 Control

System” instructions.

When using another Sony CD player together with

this player

You can make the supplied remote effective only for this

player.

• When using the player equipped with the

COMMAND MODE selector:

Set the COMMAND MODE selector of this player to

CD 1 and that of another player to CD 2 or CD 3. Then

set the CD 1/2/3 switch on the remote supplied for

each player accordingly.

• When using the player not equipped with the

COMMAND MODE selector:

The command mode of the player without the

COMMAND MODE selector is set to CD 1. Set the

COMMAND MODE selector of this player to CD 2,

and set the CD 1/2/3 switch on the remote to CD 2.

Setting the voltage selector (voltage

selector equipped models only)

Check that the voltage selector on the rear panel of the

player is set to the local power line voltage. If not, set

the selector to the correct position using a screwdriver

before connecting the AC power cord to a wall outlet.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Note on placement

Be sure to place the player on a horizontal place.

If the player is slanted, it may cause malfunction or

damage the player.

220 - 240 V110 - 120 V

LINE2ND CD

IN OUT

L

R

L

R

INPUT

CD

L

R

DIGITAL OUT

OPTICAL

DIGITAL INPUT

OPTICAL

Getting Started

6

EN

What cords will I need?

• Audio cord (1) (Use the cord supplied with the player to be

connected.)

• Monaural (2P) mini-plug cord (1) (supplied for Canadian

models only)

1 Connect the players with an audio cord (see also

“Hookups” on page 5).

2 Connect the players with a monaural (2P) mini-

plug cord.

Connecting Another CD Player

(CDP-CX240 only)

If you have a Sony CD player equipped with the

CONTROL A1 jack and the command mode of that

player can be set to CD 3, you can control that player as

the second player with this unit. After connecting this

unit and an amplifier, follow the procedure below.

Be sure to turn off the power of each player before

making this connection.

CDP-CX200, etc.

CDP-CX240

CDP-CX200, etc.

To an AC outlet

: Signal flow

To audio input

To LINE OUT

Amplifier

CDP-CX240

CDP-CX200, etc.

CDP-CX240

For details on this connection, refer to the

supplementary “S-Link

TM

/CONTROL-A1 Control

System” instructions.

3 Set the COMMAND MODE selector of each

player.

Set the COMMAND MODE selector of this player

to CD 1 or CD 2, and set that of the second player

to CD 3.

To an AC outlet

For details on how to operate the second player,

see “Controlling Another CD Player” on page 20

and “Playing Alternately” on page 22.

4 Connect the AC power cord of both players to AC

outlets.

Notes

• Do not connect a player other than that you use as the

second player to the 2ND CD IN jacks of this player.

• When connecting a second CD player, do not connect the

DIGITAL OUT (OPTICAL) connector of this unit to the

amplifier.

COMMAND

MODE

To 2ND CD IN

To S-LINK/CONTROL A1

To audio output

LINE2ND CD

IN OUT

L

R

L

R

LINE OUT

L

R

CONTROL A1

S-LINK

CONTROL A1

COMMAND MODE

CD

132

To CONTROL A1

Playing CDsGetting Started

Getting Started

7

EN

Inserting CDs

You can insert up to 200 discs into this player.

I/u

§ OPEN/CLOSE

JOG

1 Press I/u to turn on the player.

2 Open the front cover by pressing § OPEN/

CLOSE.

Rotary table

Loading position

Playing position

Disc slot at the loading position

Disc number

The disc number at the loading position appears in

the display.* If the disc has the Disc Memo (see

page 23), the Disc Memo appears instead of the

disc number. As you turn the JOG dial, the disc

number or the Disc Memo changes.

Disc number or the Disc Memo

You can classify discs into eight groups by using

the Group File function. This feature lets you easily

find the disc you want to play. For details, see

“Grouping Discs” on page 27.

* If you have already inserted discs, the disc number at

the playing position appears. When you turn the JOG

dial, the displayed disc number changes to the one at

the loading position.

ALL

*DISC-20*

DISCS

CD1

02

DISC

3 Turn the JOG dial until you find the disc slot

where you want to insert a disc, while checking the

disc number (written beside every slot and also

indicated in the display).

(Continued)

Getting Started

8

EN

The rotary table turns and the disc slot at the

loading position is set to the playing position.

Always close the front cover except when you

insert or remove discs.

5 Repeat Steps 3 and 4 to insert more discs.

6 Close the front cover by pressing § OPEN/

CLOSE.

With the label side

facing right

After inserting the disc, you can input the original

disc titles instead of the disc numbers (see

“Labeling Discs” on page 23) to locate it easily

when you start playing.

4 Insert a disc with the label side facing right.

ALL DISCS

CD1

20

DISC

SONYHITS

The supplied CD booklet holders help you locate a

disc

You can store up to 200 CD booklets. Insert a booklet and

stick the number label on the film of a pocket and the

booklet so that you can locate the disc easily.

Notes

• Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It

may damage the player.

• Do not attach anything such as seals or sleeves to CDs. It

may damage the player or the disc.

• If you drop a disc into the player and the CD won’t go

into the slot correctly, consult your nearest Sony dealer.

• When transporting the player, remove all discs from the

player.

• Make sure you have inserted the disc into each slot at a

right angle to the rotary table. If the disc is not put in

straight, it may damage the player or the disc.

• Make sure the rotary table comes to a complete stop

before inserting or removing discs.

The front panel closes automatically when you press

·. Be careful not to put your hand into the player after

pressing · otherwise your hand may be caught in the

front panel.

Playing CDsGetting Started

Getting Started

9

EN

Removing CDs

After following Steps 1 to 3 of “Inserting CDs” on page

7, remove the discs. Then close the front cover.

Basic Operations

10

EN

Playing a CD

23

1

2

• See pages 4 – 5 for the hookup

information.

• Make sure you have inserted the

discs correctly as indicated on

pages 7 – 8.

• You can play all the tracks on a

disc in the original order

(Continuous Play). You can also

play up to 200 discs

consecutively.

You can turn on the player

by pressing I/u on the

remote Z

Turn on the amplifier and select the CD player position.

Press I/u to turn on the player.

Press CONTINUE to select ALL DISCS or 1 DISC Continuous

Play mode.

Each time you press CONTINUE, “ALL DISCS” or “1 DISC”

appears in the display.

3

When you select

ALL DISCS

1 DISC

The player plays

All discs in the player consecutively in the order of

disc number. Empty disc slots are skipped.

Only one disc you have selected

Turn the JOG dial until the disc number or the Disc Memo (see

page 23) you want appears in the display to select the first disc

(ALL DISCS) or the disc you want (1 DISC).

4

4/5

ALL DISCS

CD1

20

DISC

*DISC-20*

5

STANDBY

I / u

TIMER

OFF PLAY

KEY BOARD

KEYBOARD

CONTINUE

GROUP 1

GROUP 5

SHUFFLE

GROUP 2

GROUP 6

PROGRAM

GROUP 3

GROUP 7

REPEAT

GROUP 4

GROUP 8

TIME/TEXT

HIT LIST

GROUP FILE

MEGA CONTROL

FADER NO DELAY

X-FADE

MEMO SEARCH

INPUT

DISC/CHARACTER

PUSH ENTER

OPEN/CLOSE

AMS

CHECK CLEAR

Basic Operations

11

EN

5

Push the JOG dial or press · to start playing.

The selected disc is set to the playing position, and the player

plays all the discs from the selected one (ALL DISCS) or all the

tracks once (1 DISC).

Adjust the volume on the amplifier.

To stop playback

Press p.

When you turn off the player

The player remembers the

last playing disc and the

play mode (Continuous,

Shuffle (see page 16) or

Program (see page 17)).

When you turn on the

player again, therefore, the

player plays the same disc in

the same play mode.

§ OPEN/CLOSE

≠/±

·P p

To

Pause

Resume playing after pause

Go to the next disc

Go back to the preceding disc

Go to the next track

Go back to the preceding track

Stop playing and remove the disc

You need to

Press P

Press P or ·

Press DISC SKIP + once.

Hold down the button to skip discs.

Press DISC SKIP – once.

Hold down the button to skip discs.

Press ±

Press ≠

Press § OPEN/CLOSE

JOG

STANDBY

I / u

TIMER

OFF PLAY

KEY BOARD

KEYBOARD

CONTINUE

GROUP 1

GROUP 5

SHUFFLE

GROUP 2

GROUP 6

PROGRAM

GROUP 3

GROUP 7

REPEAT

GROUP 4

GROUP 8

TIME/TEXT

HIT LIST

GROUP FILE

MEGA CONTROL

FADER NO DELAY

X-FADE

MEMO SEARCH

INPUT

DISC/CHARACTER

PUSH ENTER

OPEN/CLOSE

AMS

CHECK CLEAR

Playing CDs

12

EN

Playing CDs

Using the Display

You can check information about the disc using the

display.

p

JOG

TIME/TEXT

Checking the total number and playing

time of the tracks

Select the disc you want to check, and push the JOG

dial in the Continuous Play mode. As the player starts

play automatically, press p to stop, and then

TIME/TEXT.

The display shows the current disc number, total

number of tracks and total playing time of the disc.

When you want to check another disc

Press DISC SKIP on the remote in the stop mode to select

the disc you want to check. The total number of tracks

and the total playing time of the selected disc appear for

a while.

Current disc number

Total number of tracks

Total playing time

Display information while playing a disc

While playing a disc, the display shows the current disc

number, track number, playing time of the track and

the next disc number.

Current disc number

Next disc number

Current track number

Playing time of the track

TIME/TEXT

HIGH-LIGHT

ALL DISCS

CD TEXT

CD1

DISC

SONYHITS

ALL DISCS

CD1

20

DISC

TRACK

MIN

SEC

20 10 60.48

ALL DISCS

CD1

83

DISC

TRACK

MIN

SEC

20 1 0.28

Checking the information of CD TEXT discs

CD TEXT discs have information, such as the disc titles

or artist names, memorised in a blank space on the

discs where, on normal discs, there is no information.

The display shows the CD TEXT information of the

disc so that you can check the current disc title, artist

name and track title. When the player detects CD TEXT

discs, the “CD TEXT” indication appears in the

display. If your CD TEXT disc has multi language

capacity, “MULTI CD TEXT” indication appears in the

display. If you want to check the information in

another language, refer to “Selecting the language of

the CD TEXT information” on page 13.

Display information before you start playing

The display shows the disc title. When you press

TIME/TEXT, the artist name scrolls in the display. If

you press TIME/TEXT again, the display shows the

current disc number, total number of tracks and total

playing time of the disc momentarily. Then the display

shows the disc title again.

INPUT

Playing CDsGetting Started

Playing CDs

13

EN

Display information while playing a disc

Each time you press TIME/TEXT, the display shows

the information as shown below.

The current disc

number, track

number and

playing time

appear.

Press

The current track

title appears.

Press

This information also appears when

the player locates the track.

To play disc highlights

Some CD TEXT discs have a feature to play only the

highlights of the discs.

Press HIGH-LIGHT on the remote to start playing disc

highlights in the stop mode.

“Hi LIGHT” indication in the display flashes while playing

disc highlights.

If you press HIGH-LIGHT while selecting discs without this

feature, “NO HIGHLIGHT” appears in the display.

JOG

≠/±

MEMO SEARCH

DISC

ENTER

MEMO SCAN

·

Number

buttons

>10

ALL DISCS

CD TEXT

CD1

DISC

TRACK

MIN

SEC

ALL DISCS

CD TEXT

CD1

TRACK

13

12 1 1.52

13

HitechBlues

3 Turn the JOG dial until the language you want

appears in the display.

4 Push the JOG dial to select the language.

“Reading Text” appears momentarily, then the

display shows the information in the selected

language.

To check the current language

1 Press INPUT while playing a CD TEXT disc.

“Show lang.” flashes.

2 Push the JOG dial.

The current language appears momentarily.

You can also check the current language while selecting a CD

TEXT disc without multi-language information.

Note

If you select a CD TEXT disc which does not contain the

information of the selected language, the display shows the

information in another language according to the disc’s

priority.

Locating a Specific Disc

(Continued)

ALL

Select lang.

DISCS

MULTI CD TEXT

CD1

21

ALL

English

DISCS

MULTI CD TEXT

CD1

21

Selecting the language of the CD TEXT

information

You can select the language used to display the CD

TEXT information when you select a CD TEXT disc

with multi-language information.

Once you select the language, the display shows the

information in the selected language until you turn off

the player. If the player cannot read the language

memorized in a CD TEXT disc, the player shows

“(other lang.).”

1 Press INPUT in stop mode.

“Select lang.” flashes.

2 Push the JOG dial.

The current operating language flashes.

Playing CDs

14

EN

Each time you press ≠/±, the characters

appear in the following order.

A B C D E F G H I J K L M N O P Q R S T U V W X

Y Z 0 1 2 3 4 5 6 7 8 9

If “NOT FOUND” appears in the display while

inputting the first character with the ≠/±

buttons, no disc has been labeled using the input

character.

Notes

• When searching input characters, blanks and symbols

before the first character in the Disc Memo are ignored.

• When searching input characters, upper and lower

cases cannot be differentiated.

3 Turn the JOG dial to find the disc you want.

As you turn the JOG dial, the Disc Memos starting

with the input character appear in the display.

4 Push the JOG dial to select the disc.

In Program Play mode, the disc will be added to

the end of the program.

To cancel Memo Search

Press MEMO SEARCH again.

If there is no more Disc Memo starting with the input

character in Step 3

The input character changes to the next one when you

turn the JOG dial.

Input character

ALL DISCS

CD1

S

SONYHITS

Selecting a disc on the player

Turn the JOG dial until the disc number or Disc Memo

(see page 23) you want appears in the display. Push the

JOG dial to start play.

Selecting a disc directly using the remote

1 Press DISC.

2 Press the number button of the disc.

Example: To enter number 35

Press 3 then 5.

To enter number 100

Press 1, then 10/0 twice.

3 Press ENTER to start play.

Locating a disc by scanning each Disc

Memo (Memo Scan) Z

You can locate a disc you want to play quickly by

scanning the Disc Memos (see page 23) in the display .

Note that you cannot use this function in the ALL

DISCS Shuffle Play mode.

1 Press MEMO SCAN.

“MEMO SCAN” appears in the display, and the

Disc Memos scroll in the display.

2 Press · when the Disc Memo of the disc you

want to play appears.

The disc is set to the playing position, and the

player starts playing.

In Program Play mode, the disc will be added to

the end of the program if you press ENTER instead

of ·.

Note

If “NO ENTRY” appears in the display, no disc has been

labeled with the Disc Memo. Try the Memo Scan function

again after labeling the discs.

Locating a disc by searching a specific Disc

Memo (Memo Search)

You can search and locate a disc you want by inputting

the first character used in the Disc Memo (see page 23).

1 Press MEMO SEARCH.

“MEMO SEARCH” appears in the display.

2 Press ≠/± repeatedly to input the first

character.

Playing CDsGetting Started

Playing CDs

15

EN

Locating a Specific Track or a

Point in a Track

You can quickly locate any track while playing a disc

using the ≠/± (AMS: Automatic Music Sensor)

buttons or number buttons on the remote. You can also

locate a specific point in a track while playing a disc.

≠/±

Number

buttons

=/+

0/)

To locate

the next or

succeeding tracks

the current or

preceding tracks

a specific track

directly Z

a point in a track

while monitoring the

sound Z

a point in a track

quickly by observing

the display Z

Press

± repeatedly until you find the

track

≠ repeatedly until you find the

track

The number button of the track on the

remote

0 (backward)/) (forward) on the

remote and hold down until you find

the point

0 (backward)/) (forward) on the

remote and hold down until you find

the point during pause. You will not

hear the sound during the operation.

Specifying the Next Disc to

Play

You can specify the next disc to play while playing a

disc in Continuous or 1 DISC Shuffle Play mode.

While playing a disc, turn the JOG dial. “NEXT DISC”

appears in the display and the disc number or Disc

Memo (see page 23) changes as you turn the JOG dial.

When the disc number or Disc Memo you want

appears in the display, stop turning the JOG dial.

After the current disc is played, the next disc you have

specified starts playing.

If you want to skip to the next disc right away, push

the JOG dial while playing the current disc.

To cancel the disc you have specified

Press CONTINUE twice.

Next disc number or

the Disc Memo

>10

When you directly locate a track numbered over 10 Z

Press >10 first, then the corresponding number buttons

on the remote.

Note

If “– OVER –” appears in the display, the disc has reached the

end while you were pressing ) on the remote. Press ≠ or

0 on the remote to go back.

ALL DISCS

CD1

NEXT DISC

38

*DISC-38*

Playing CDs

16

EN

Playing in Random Order

(Shuffle Play)

You can have the player “shuffle” the tracks and play

in random order. The player shuffles all the tracks on

all discs or on the disc you specified.

JOG

SHUFFLE

·

Playing Repeatedly

You can play discs/tracks repeatedly in any play

mode.

Press REPEAT while playing a disc.

“REPEAT” appears in the display. The player repeats

the discs/tracks as follows:

When the disc is played in

ALL DISCS Continuous Play

(page 10)

1 DISC Continuous Play

(page 10)

ALL DISCS Shuffle Play

(page 16)

1 DISC Shuffle Play

(page 17)

Program Play (page 17)

To cancel Repeat Play

Press REPEAT twice.

Repeating the current track

You can repeat only the current track.

While the track you want is being played, press

REPEAT repeatedly until “REPEAT 1” appears in the

display.

To cancel Repeat 1

Press REPEAT.

The player repeats

All tracks on all discs

All tracks on the current disc

All tracks on all discs in

random order

All tracks on the current disc

in random order

The same program

REPEAT

Playing all tracks on all discs in random

order

1 Press SHUFFLE.

“ALL DISCS” and “SHUFFLE” appear in the

display.

2 Push the JOG dial or press ·.

ALL DISCS Shuffle Play starts.

“

” appears in the display while the player is

“shuffling” the discs or the tracks.

·

SHUFFLE

DISC

Number

buttons

ENTER

Playing CDsGetting Started

Playing CDs

17

EN

Creating Your Own Program

(Program Play)

You can arrange the order of the tracks and/or discs to

create three different programs and programs are

stored automatically. A program can contain up to 32

“steps” — one “step” may contain a track or a whole

disc.

You can make programs using the controls on the

remote as well as ones on the player. However, the

programming procedures are different.

Creating a program on the player

1 Press PROGRAM until the program number you

want (PROGRAM 1, 2 or 3) appears in the display.

If a program is already stored in the selected

program number, the last step of the program

appears in the display. When you want to erase the

whole program, hold down CLEAR until

“CLEAR” appears in the display (see page 19).

2 Turn the JOG dial until the disc number you want

appears in the display.

JOG

PROGRAM

CHECK

3 To program a whole disc, skip this step. Press

≠/± until the track number you want

appears in the display.

Track number

·

≠/±

CLEAR

Playing all tracks on a specified disc in

random order

1 Press SHUFFLE twice.

“1 DISC” and “SHUFFLE” appear in the display.

2 Turn the JOG dial until the disc number you want

appears in the display.

When using the remote, press DISC first and then

press the number button of the disc.

3 Push the JOG dial or press ·.

When using the remote, press ENTER.

1 DISC Shuffle Play starts.

“

” appears in the display while the player is

“shuffling” the tracks.

To cancel Shuffle Play

Press CONTINUE.

You can start Shuffle Play while playing

Press SHUFFLE, and Shuffle Play starts from the current

track.

You can directly select a disc for 1 DISC Shuffle Play

See “Selecting a disc directly using the remote” on page

14.

You can go to the next disc during 1 DISC Shuffle Play

Press DISC SKIP +.

You can specify the next disc to play during 1 DISC

Shuffle Play

Turn the JOG dial to specify the next disc. After all the

tracks on the current disc are played in random order,

the next disc starts playing. If you want to skip to the

next disc right away, push the JOG dial while playing the

current disc.

Notes

• You cannot specify the next disc to play during ALL DISCS

Shuffle Play.

• Even if you press p or turn off the player during ALL

DISCS Shuffle Play, the player remembers which discs/

tracks were played and which were not. Therefore, if you

want to start ALL DISCS Shuffle Play again from the

beginning, be sure to repeat the procedure from Step 1.

(Continued)

PROGRAM

1

CD1

DISC

20

*DISC-20*

PROGRAM

1

CD1

DISC

TRACK

STEP

20

20 3 1

Playing CDs

18

EN

3 Press the number button of the disc.

>10

DISC

CHECK

·

PROGRAM

Number

buttons

ENTER

CLEAR

1 Press PROGRAM until the program number you

want (PROGRAM 1, 2 or 3) appears in the display.

2 Press DISC.

4 To program a whole disc, press ENTER and go to

Step 6.

Press >10.

5 Press the number button of the track.

When the disc has more than 10 tracks, press 0 first

then press the corresponding number to enter a

track number from 1 to 9.

4 Push the JOG dial.

5 To program other discs/tracks, do the following:

To program

All tracks of another disc(s)

Other tracks on the same disc

Other tracks on other discs

6 Push the JOG dial or press · to start Program

Play.

To cancel Program Play

Press CONTINUE.

The programs remain even after Program Play ends

When you push the JOG dial or press ·, you can play

the same program again.

When you press PROGRAM to select Program Play

during Continuous or Shuffle Play

The program will be played after the current track.

The program remains until you erase them

Even if you replace discs, the programmed disc and track

numbers remain. So, the player plays only the existing

disc and track numbers. However, the disc and track

numbers that are not found in the player or on the disc

are deleted from the program, and the rest of the

program is played in the programmed order.

Note

If you press one of the GROUP 1 – 8 buttons to start Group

Play, Program Play will be canceled (see page 27).

Repeat Steps

2 and 4

3 and 4

2 to 4

The disc being

programmed

Playing order

The track being programmed

Creating a program using the remote Z

The disc being programmed

The track being programmed

Playing order

PROGRAM

1

CD1

DISC

TRACK

STEP

20

20 3 1

PROGRAM

1

CD1

DISC-[ _]

02

PROGRAM

1

CD1

DISC-[ 20]

02

PROGRAM

1

CD1

DISC

TRACK

STEP

20 -- 1

02

PROGRAM

1

DISC

TRACK

STEP

20

20 3 1

Playing CDsGetting Started

Playing CDs

19

EN

Changing the programmed order

You can change your program before you start playing.

To

Erase a track or disc

Erase the last track or

disc in the program

Add tracks or discs to the

end of the program

Erase the whole program

completely

You need to

Press CHECK until the track or

disc you do not want appears in

the display, then press CLEAR

Press CLEAR. Each time you

press the button, the last track or

disc will be cleared.

Follow the programming

procedure

Hold down CLEAR until

“CLEAR” appears in the display

to erase the whole program, then

create a new program following

the programming procedure

6 To program other discs/tracks, do the following:

To program

All tracks of another disc(s)

Other tracks on the same disc

Other tracks on other discs

7 Press · to start Program Play.

To cancel Program Play

Press CONTINUE.

Checking the programmed order

You can check your program before or after you start

playing.

Press CHECK.

Each time you press this button, the display shows the

disc and track number of each step in the programmed

order. (When a whole disc is programmed as one step,

“ALL” appears instead of the track number.) After the

last step in the program, the display shows “– END –”

and returns to the original display.

Repeat Steps

2 to 4

5

2 to 5

Erasing the program stored in memory

1 Press PROGRAM repeatedly in the stop mode

until the program number (PROGRAM 1, 2 or 3)

you want to erase appears in the display.

2 Hold down CLEAR until “CLEAR” appears in the

display.

Playing Using a Timer

(CDP-CX240 only)

You can start playing a disc at any time you want by

connecting a timer (not supplied). Please also refer to

the instructions for the timer if you need help.

TIMER Play mode buttons

1 Press one of the play mode buttons to select the

play mode you want.

2 Set TIMER on the player to PLAY.

3 Set the timer to the time you want.

The player turns off. When the set time comes, the

player turns on and starts playing.

4 After you have used the timer, set TIMER on the

player to OFF.

Playing CDs

20

EN

1 Press MEGA CONTROL on this player.

The MEGA CONTROL button and “2nd” in the

display light up. The display shows the current

disc number or disc memo of the second player.

≠/±

JOG

pP

·

Current disc number or the Disc Memo

Play mode buttons

(CONTINUE/SHUFFLE/

PROGRAM/REPEAT)

Controlling Another CD Player

(Advanced Mega Control)

(CDP-CX240 only)

This unit can control a second CD player (see

“Connecting Another CD Player” on page 6).

Even when a second CD player is connected, the

controls on both of the units will function. When you

press the play button on either unit, the operating

player stops and the resting player starts.

Make sure “2nd DETECTED” appears in this player’s

display after turning on both players.

Note that depending on the player, you may not be

able to operate all the functions of the second CD

player.

The controls indicated in the illustration below are effective

while the MEGA CONTROL button is lit.

2 Select the play mode you want.

To program tracks, use the controls on the second

player.

You cannot change the second CD player’s ALL

DISCS Play mode to 1 DISC Play mode, and vice

versa, by using the play mode button on this

player.

3 Press · on this player to start playing.

The play starts and the display shows the current

disc and track numbers and the playing time of the

track.

While the MEGA CONTROL button is lit, you can

control the second player with the controls on this

player.

To control the second player directly using the supplied

remote

Set CD 1/2/3 on the remote to CD 3 which is the same

position as the COMMAND MODE selector on the rear panel

of the second player.

To control this player again

Press MEGA CONTROL. The MEGA CONTROL button goes

off and you can control this player.

Loading the Disc Memos of the second CD

player

If the second CD player has the Disc Memo function

(see page 23), you can load the Disc Memos of the

second CD player to this player’s memory and display

them on this player.

1 Press INPUT.

2 Turn the JOG dial until “LOAD 2ND MEMO”

appears in the display.

0/)

ALL DISCS

CD1

2nd DISC

4

*DISC-4*

ALL DISCS

CD1

LOAD 2ND MEMO

INPUT

MEGA CONTROL

La page charge ...

Sony CDP-CX220 Le manuel du propriétaire

Sony CDP-CX220 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents