Sunstech NSX100BTDVD Mode d'emploi

Model: NSX100BTDVD

MICRO HIFI COMPONENT SYSTEM

TABLE OF CONTENTS

BEFORE USE

Safety Information……………………………….. ……………………………...1

Disk Protection.…………………………………………………………………..2

Operating Instructions…………………………………………………………...3

Set the Size of TV Screen..…………………………………………………….......4

Accessories………………………………………..……………………………...4

System Connection...……………………………..……………………………...5

Basic Functions....………………………………...……………………………....6

Advanced Functions....…………………………………………………………..7

Special Functions………………………………………………………………...9

Setting and Operating……………………………….. ………………………...10

System Setup.…………………………………….……………………………..10

Speaker...………………………………………………………………………...11

Dolby Digital Surround..………………………………………………………...12

Video Setting……..………………………….. …….…………………………....12

Default Setting…………………………………………………………………..14

Copying of CD, MP3 and MP4 Contents……………………………………........16

MIC Setup.....................................................................................................................................17

Radio…………………………………….. ……………………….……………...18

Multimedia…………………………………….. ………………………………..18

Operating Instructions of Bluetooth...................................................................................20

Troubleshooting………………………………………………………..………....21

Specications…………………………………….. ………………………...…......22

BEFORE USE

Danger! High Voltage! Electric Shock If Opened!

Operate with Caution! Please refer to the related operating

instructions.

Label for Class II Products (Dual Insulation)

To replace the power cord, use the product with the

r.

To avoid electric shock, use the right power cord and

insert it properly.

Laser parts are used in this System. If instructions

described in this Manual are not followed in operating or

adjusting the System, personnel may be exposed to radiation.

WARNING:

Precautions:

Hazardous

Operation:

T

System in the rain or in a place with high humidity. Do not

open the System without permission, for the parts inside may

have high voltage.

Do not open or repair the System. Such work should be done

Visible or invisible radiations may be sent out when the

System is opened. Therefore, do not open the System so as

to avoid radiation.

1

Safety Information

2

Safety Information and Maintenance

Please read through this Manual and understand the warning signs and

indications on the parts. Keep the Manual properly for the use of the future.

All parts are specially designed and manufactured so as to ensure safety.

Power supply: Follow the descriptions

on the label and use the power cord

properly.

Keep all parts away from

moisture.

Avoid direct sunshine and high

temperature.

Do not open the cover. Otherwise,

needles, hairpins or coins may fall

into the equipment.

Protect the power cables. Do not

allow it to be pressed by heavy

objects, nor step on it. Do not

stretch or bend it excessively.

If the System is not used for

a long time, unplug the power

cord from the outlet.

Disk Protection

To clean a dirty disk, you should use a clean rag and clean it in

a linear way and from inside to outside.

Keep the player, battery and disk away from environment with

moisture, rain, dust or high temperature (which comes from

heating equipment or direct rays). Keep the disk tray moved in

so as to avoid dust.

Do not apply any soluble substances, such as benzene, thinner,

cleaning agent and anti-static spray, to the color disk.

When the Player is suddenly moved from a cold environment to

a warm environment, water can be condensed on the lens of the

player, which may lead the failure of the disk. In this case, put

the Player in the warm environment till the condensed water on

the lens is totally evaporated.

3

Disk Protection

Operating Environment

Disk Protection

Structure of Disk Contents

Interference

Condensed Water

When the System works for a long time,

the panels at the top and bottom of the

device can become warm.

When the device is not used, take out

the disk and unplug the power cord.

If it is not used for a long time, the

System may malfunction or its

performance becomes deteriorated. For

that reason, the device should be

operated occasionally.

Do not place foreign objects onto the

disk tray.

Do not put the device in an environment

with:

Heat source or enclosed space (like in a

car);

High temperature (≥40 ) or high

humidity (≥90%);

Dirt;

Direct sunshine.

Keep the device away from TV, radio

and video recorder so as to avoid

distorted image or sound.

Condensed water may appear on the

device in the cases below:

When it is moved from cold environment

to a warm one, and vise versa;

When it is used in a space with a running

air conditioner system and the cold air

contacts the device;

When it is in the house with much steam

or high humidity.

A device with condensed water may not

work properly. In this case, you can plug

the power cord and keep the machine

running idle for about 2-3 hours. And

the water can be evaporated after the

temperature rises. If the power cord

remains unplugged, water won’t be

condensed on the device.

Do not touch the Replay button.

Do not stick tape or paper onto the

disk. To clean a disk, use a wetted

rag rst, then a dry rag.

To avoid damage to the device, do

not apply any soluble substances,

such as benzene and anti-static

spray with ethylene-based substance,

to the disk.

Do not seal up the disk in a place

close heat source, nor in a bathroom

or close to a humidier.

Seal up the disk in a box, the top of

which shall have no heavy objects.

Normally, the digitalized video disk

comprises of dierent titles that are

made up of chapters.

Audio disk is made up of tracks.

Each title, chapter and track has a

number, respectively called title

number, chapter number and track

number. But some disks may not

have such numbers.

Set the Size of TV Screen

Accessories

TV screens always have a special proportion that corresponds to its size.

TV

Screen

Displayed part

Common

4:3

16:9

Full Screen

Mailbox Type

Wide Screen

unit 1 piece

2.0 Speaker 1 set

Remote control 1 piece

FM antenna 1 piece

Audio/video cable 1 sets

User’s Manual 1 piece

4

System Connection

Please refer to the drawing below for system connection. Do not plug the power

cord before the connection is completed.

Note:

1. Make sure the source cables are properly connected. Otherwise, no audio

contents will be output or other failures come out.

2. Make sure the power cord is unplugged before removing or inserting the

connecting cables. Otherwise, the device or other parts may be damaged.

5

R/8 L/8

S- Video output

Video output

Tape

Audio Output

FM Antenne

Inside Amplier

Power Output

Right Speaker

TV

Left Speaker

Left

Channel

YUV Output

Right

Channel

Inside Amplier

Power Output

Dolby Amplier

Basic Functions

Preparation

If you want to watch the disk

contents, turn on the TV, select

the video mode and connect TV

to the DVD Player.

Playing

1. Press the Power button to start

the device. At the time, directions

will appear on the screen, and LED

illuminated. If the disk is not inserted,

words “no disk” will appear on the

screen. If inserted with the tray, the

device will play the disk automatically.

2. Press ON/OFF to withdraw the disk

tray. The device can accept two types

of disks. Follow the indications on the

disk to insert it. Failure to follow such

indication may cause damage to the

disk and malfunction of the player.

Do not put incompatible disks into

the device.

3. Press ON/OFF to move in the disk

tray, and the device will start playing

automatically. Some disks might not

be played automatically, and the user

should manually make selections in

the main interface to start the playing.

You can press Enter/Play on the remote

control or select the corresponding

number for that purpose.

Stop Playing

1. Press Stop to enter the stop mode.

At the time, the “start-up” icons will

appear on the TV screen. The Player

can memorize the stopped place.

2. Press Enter/Play, and the device

will play the disk from the stopped

placed or from the beginning.

3.Press Stop twice to stop playing

completely.

Previous/Next Track

In playing mode, you can press

Previous to go back to the beginning

of the chapter. Each time you press

Previous, the system will jump back

one chapter till it reaches the starting

chapter.

In playing mode, you can press

Next to play the next chapter.

Fast Forward/Reverse

1. Press Fast Forward (FF) to fast

play the contents of the disk. The

playing speed changes each time

you press this button.

2. Press Enter/Play to restore the

normal playing state.

3. Press Fast Reverse (FR) to fast

reverse the contents of the disk.

The playing speed changes each

time you press this button.

4. Press Enter/Play to restore the

normal playing state.

Pause/Stop

1. In playing mode, press Pause/Stop

to make the playing pause. In pause

mode, the system is in mute state.

2. Press Pause/Stop again, and the

system will show the next interface

of the contents.

3. Press Enter/Play to restore the

normal playing state.

Note:

1. If the mark appears on the screen,

it means this operation is forbidden in

this device or disk.

2.The device is controlled by CPU with

settings, and the Screensaver mode

might be activated. You can press any

key to start the device.

6

Advanced Functions

NOTE: The functions said below are only applicable to DVD les. And dierent

DVD player may provide dierent functions.

Display

Press Display, and such options for

disk info as “played title”, “current title”,

“played chapter”, “current chapter” and

“close” to appear on the screen.

Video Mode

Press the Mode key to set the video

output as CVBS, YUV or P-Scan.

Note: Press this key once, and the

black screen will appear.

So, press it till the normal screen state

comes back. If the image is interfered

or no image appears on the screen,

you can press Mode to solve the

problem.

Subtitle

Title

Press Subtitle, and all options for subtitle

will appear on the screen.

The language of the subtitle shown for the

rst time is the default value of the device.

For example, if “01/02 English” is used as

the subtitle, you can press the Subtitle

again to allow the screen to other

languages, like 02/02 XX.

“01” refers to the current language.

“02” refers to the total number of

languages used in the system

(subject to DVD Player’s model).

Press this key, and the main interface

of the system will appear on the screen.

The user can make options according

to his preference. (This key is eective

only when submenus exist)

Menu

Press this key, and the main interface

of the system will appear on the screen.

The user can make options according

to his preference.(This key is ee

ctive only when submenus exist)

Angle

Press this key to view the DVD

contents from dierent angle.

GOTO

Use this key to choose chapters

and time while watching DVD

contents.

If you want to choose a chapter

whose number has to digits, you

can press “10+” to set the number.

Press Time to select the chapter

in accordance with the following

contents displayed on the screen:

Title 02/Chapter (enter the required

digits)/32

Press Time twice to select the time

when the DVD contents are played.

The information below will appear

on the screen:

Title 02/10 time : :

Press Time thrice to select the time

point in the chapter. The information

below will appear on the screen:

Chapter 01/32 Time : :

Volume and Mute

Press the key [+] to turn up the

volume and [-] to turn it down.

Press Mute to set the system in

the mute mote (no sound). Press

Mute again to restore the normal

playing state.

Repeat

Perform the operations below to

repeat the chapter, DVD title and

the whole DVD contents.

Press Repeat once to repeat the

7

contents of the chapter.

Press it twice to repeat the

contents of the title.

Press it thrice to repeat the

whole contents of the DVD disk.

Press it for the fourth time

to cancel the repeat mode.

Note: For disks with such formats

as CD, JPEG, Kodak Picture,

WMA, MP3, HDCD and CD+G,

you should use the main interface

of the system to repeat the playing.

Zoom

Press this key to zoom in the image.

In this mode, the user can also use

the navigation keys to move the

image.

A-B

The user can also mark one

section of the DVD contents

and allow the system to play

it repeatedly. To that eect,

choose the starting point you

want to repeat and press the

key A-B to set Point A when

the DVD contents are being

played, and press it again to

set Point B as ending point.

Then the part between A and

B will be played repeatedly.

Press the key A-B for the third

place to cancel the state.

Slow

Press the key Slow to slow down

the playing. Each time you press

this key, the playing speed changes

as follows:

►1/2→►1/4→►1/8→►1/16.

Source

Choose signal source among

DVD/FM/LINE IN/BT.

Language

Some DVD Players supports multiple

languages. Press the key Language,

and the rst audio selection will

appear on the screen. Then you can

make options. Press the key again to

move to another option.

For example,

Audio 1/2: AC 3 2 CH English

Audio 2/2: AC 3 5.1 CH English

Return

In playing mode, you can press Return

to enter the main menu. Press it again

to return to the interface where all

contents of the DVD disk are displayed.

In playing S-VCD and VCD 2.0 disks,

you can press the key Return to return

to the Menu interface, and at the time,

the main interface will appear.

PBC

With the key PBC (play back control),

the system can provide advanced

selection when VCD disk is being

played. Press this key to enter the

related interface (for some disks, the

PBC interface can be reached

automatically). Then press the numeric

keys to make the options. Press the

key again to exit the options.

Programme

With this function, the user can

programme the chapters and play them

in accordance with his own will.Press

Programme, and the chapters list will

appear on the screen, where the user

can choose the desired chapter and

programme it. After that, the user can

move the curser to select the starting

mark. At the time, the system will start

“channel playing”, where the “channel

mark” will appear on the screen.

8

Special Functions

Audio CD Playback

When a disk with CD format is inserted into the device, the System can play its

contents automatically.

● Press Previous/Next to change the track, and FF/FR to fast forward or fast

reverse the contents.

●Note: A CD+G disk is equal to an Audio CD.

MP3 Playback

When a disk with MP3 format is about to be

played, the system will automatically display

the navigation interface while the contents are

being uploaded.

●In the navigation interface, use the key Up/Downto make options. After

●In all the tracks, use the key Up/Down to make options. After selection, press

Enter/Play to play the track.

●In the current interface, press the key Left to return to the previous menu, and

press Previous/Next to enter the previous and next page.

Kodak Picture CD Disc Playback

When a disk with Kodak Picture format is about to be played, the system will

automatically display the navigation interface while the contents are being

uploaded.

●In the navigation interface, use the key Up/Down to make options. After

●In all the tracks, use the key Up/Down to make options. After selection, press

Enter/Play to play the track.

●Each picture of the Kodak Picture CD will be displayed as slide, whose size is

automatically adjusted in accordance with the proportion of the TV.

●Press the key Main Interface to return to the main interface.

●Press Pause to allow the playing pause and the current picture will remain still.

●Press Previous/Next to view the previous and next picture.

●Press Enter/Play to return the slide mode. Note: The quality of the picture

displayed is subject to the model of the device used for viewing.

JPEG Disk Playback

When a disk with JPEG format is about to be played, the system will automati-

cally display the navigation interface while the contents are being uploaded.

●In the navigation interface, use the key Up/Down to make options. After

r.

●Press Previous/Next to select the previous and next picture.

●Press Pause to allow the picture-playing pause so that you can view for a

longer time. Press Enter/Play to return to the normal playing state.

9

System Setup

A.TV Display

B. Angle Mark

C. OSD Language

D. Captions

Select the key Set on the remote

control, and the setup interface

will appear on the screen.

1. The user can use the keys

“Up/Down/Left/Right” to make

selections. However, it would be

dicult to use the cursor of the

remote control to perform the

operation. You can press Enter/Play

to make the option, and press Left to

return to the previous interface.

2. Press Set to exit the setup interface.

Interface for Normal Settings

With this interface, you can set the

displaying format of the TV screen,

the video mode and all functions

relating to DVD contents.

With this item, you can select the

displaying format of the TV screen

according to your preference. The

proportion of the displayed part on

the screen is subject to the nature

of the disk and of the TV (refer to

Page 20: Multiple Image Sizes).

In any selected displaying format,

a picture recorded with 4:3 proportion

will always be displayed with the same

width-height proportion.

In the case of DVD disk, the displaying

format might change. You can refer to the

related information for details. If the

contents of DVD disk are recorded

with 16:9 format and the TV displays

the image with proportion of 4:3, the

image will be compacted when

displayed.

Some DVD titles are recorded with

special format. In this case, whatever

displaying format the user selects,

the DVD titles with the original format

will be displayed on the screen.

In playing the DVD contents, the user

can choose one camera angle from

the options to display the contents.

The user can set the OSD language

thorough this item.

For those suering from hearing, the

supplementary narrations recorded

can be displayed on the screen.

10

E.Screen saver

F. HDCD

B. SPDIF output mode

G. Last Memory

Note: This function is only eective

for those disks with hidden subtitles.

After the system enters the stop

state for several minutes, the

screensaver mode will be enabled

and a moving image will appear on

the screen.

HDCD is the short form of “high

density compact disk”.

If the power fails abruptly, the

DVD Player can memorize the

place where the playing was

stopped. When the power is

restored, the system can play

the disk from the stopped place.

Setting the Speaker

You can use this item to set

Left/Right Channel or Stereo

DOWNMIX Mode

1 indicates the left channel.

2 indicates the right channel.

Use this item to set the SPDIF output

mode. In original SPDIF mode, the

user can only adjust the volume of

MP3 contents, not for contents with

DVD or CD format.

This DVD Player provides three audio

output options.

Disable SPDIF: In this analog

surround mode, the cables at the rear

of the panel are connected to the two

audio output ports to output the audio

source.

11

A. Dual Mono

A. Component

B. TV Mode

C. Quality

B. Dynamic

Original or modied SPDIF: With this

surround format, the audio source is

output through the Dolby digital decoder

formed on the basis of the optical mouse

at the rear panel and the co-axial connector.

Interface for setting Dolby digital surround

If the user’s microphone/decoder can

output Dolby digital surround source,

he can select stereo, left channel, right

channel or mix channel.

Set this item to play the audio

contents in high volume at night

while not disturbing others. This

item can lower the volume, but keep

the original sound quality. The gure

below shows the range to be set from

the lowest to the highest volume, with

the unit dB.

Video Setup

Use this item to set the video

output.

Set the TV mode in this device

the same as the user’s TV. If

the image is interfered or no

image appears, press V-Mode

to adjust.

Use this item to set the image

quality of the output video.

12

Sharpness

Brightness

Use this item to set the brightness

of the output video.

Press the key Right, and the

interface below will appear:

Then press Left/Right to adjust

the brightness, and press

Enter/Play to conrm the selection.

At the same time, the screen

returns to the previous interface.

Contrast

You can set the contrast through

the interface of Video setting.

Press the key Right to reach the

interface.

Then press Left/Right to adjust the

contrast through the numbers, and

press Enter/Play to conrm the

selection. At the same time, the

screen returns to the previous

interface.

13

Default Setting

The item Default Setting appears

only when the machine was not used.

To activate the adjustment, you have

to restart the machine.

A. TV Type

This DVD Player supports a variety

of TV standards, such as MULTI

(AUTO), NTSC and PAL.

If your TV only supports NTSC or

PAL standard, the TV screen will

blink with black and white spots

when a wrong standard is selected.

In this case, you should press Set

and go to the interface of default

proper standard to play the contents.

Note: To set the TV standards:

1. You can choose from the two

options, NTSC and PAL, from the

DVD Player;

2. Refer to the table below, which

shows the TV standard matched

by the respective disk:

B. Audio

You can choose the item Audio in

the preference interface to set the

audio output of the DVD contents.

C. Subtitle

Set the preferred language as the

default value of the DVD Player’s

subtitle. (Subject to compatibility

of DVD Player)

D. Disc Menu

Set the preferred language as the

default value of the main interface

of the DVD Player. (Subject to

compatibility of DVD Player)

14

DVD

E. Parental Control

F. Change the Password

G. Default

With the item Channel Supervision,

you can set the examination class

for DVD disk, so that family members

can view the contents in accordance

with their respective age group. 8

examination classes are available.

Press Left/Right to make the selection,

and press Enter/Play to conrm it. At

the time, the system will return to the

previous interface.

You can change the password so

that your family members can watch

the disk. To do that, enter the

preference interface and select

Then password. Press Password

and enter a four-digit password.

Note: To avoid oblivion, you may

write down the set password.

You have to enter the old password

before you enter the new one

(default password: 1234).

Use the item Default, you can

restore the default settings

(except the password). To do that,

choose the item Default in the

preference interface, and press

Enter/Play to restore the factory

defaults.

15

Copy Contents of CD, MP3 and AVI to USB Device

Please make sure the movable USB device has enough memory space that can

accept all contents from DVD Player.

CD Taking-In

1. Basic setting: This DVD Player can read the

contents in CD, USB device and have enough

memory.

2. After the contents of CD are read, press Copy to

prop up the new options (see the picture below).

Then press Up/Down/Left/Right to make selections.

3. After the contents of CD are taken in, press Exit

to the take-in interface.

Copy Contents of MP3 and AVI

1. Basic setting: This DVD Player can read contents

of MP3 and USB device, and have enough memory.

2. After the contents of MP3 are read, press Stop.

After you

press Copy, the related dialogue box will prop up.

At the time, press Enter.

3.

will prop up. Press Enter to complete the copying

process.

4. To copy contents of AVI format, use the same

procedure as MP3.

Note: It is normal to see “disk being reading” dialogue box.

16

FIGURE 1 FIGURE 2

FIGURE 3

FIGURE 4

FIGURE 5

17

MIC SETUP

Use the right arrow button to select

status ofkaraoke, may set to AUTO

or OFF.

Use the UP/DOWNbutton to

increase or decrease the karaoke

1 volume

Use the UP/DOWN button to

increase or decrease the echo

level.

Playing Radio functions

1. The frequency the embedded radio receives in the system ranges from

87.50MH~ 108 MHz.

2. In playing mode of the DVD Player, press the key Signal Source to switch to

FM mode. Then press the key Search on the remote control, and the system

will search the channels and save 1-20 of them.

3. You can press Previous/Next to select the channel you like, and use Fast

Forward or Fast Reverse to tune manually.

Multimedia

1. The System supports USB device and is compatible with les with such

formats as JPEG, MP3, AVI and WMA.

2. It also supports SD card and is compatible with les with such formats as

JPEG, MP3, AVI and WMA.

3. Play contents in USB device: Contents in USB device can be played only

when there is no disk or card inside the player. If so, the player will play the

contents automatically after properly connected.

4. Play contents SD card: Contents in SD card can be played only when there

is no disk or USB device inside the player. If so, the player will play the contents

automatically after properly connected.

Note:

A: If malfunction exists in memory device, the player won’t play its cont

18

La page charge ...

Sunstech NSX100BTDVD Mode d'emploi

Sunstech NSX100BTDVD Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents