Sunstech NSX100BTDVD Mode d'emploi

Taper
Mode d'emploi
Model: NSX100BTDVD
MICRO HIFI COMPONENT SYSTEM
TABLE OF CONTENTS
BEFORE USE
Safety Information……………………………….. ……………………………...1
Disk Protection.…………………………………………………………………..2
Operating Instructions…………………………………………………………...3
Set the Size of TV Screen..…………………………………………………….......4
Accessories………………………………………..……………………………...4
System Connection...……………………………..……………………………...5
Basic Functions....………………………………...……………………………....6
Advanced Functions....…………………………………………………………..7
Special Functions………………………………………………………………...9
Setting and Operating……………………………….. ………………………...10
System Setup.…………………………………….……………………………..10
Speaker...………………………………………………………………………...11
Dolby Digital Surround..………………………………………………………...12
Video Setting……..………………………….. …….…………………………....12
Default Setting…………………………………………………………………..14
Copying of CD, MP3 and MP4 Contents……………………………………........16
MIC Setup.....................................................................................................................................17
Radio…………………………………….. ……………………….……………...18
Multimedia…………………………………….. ………………………………..18
Operating Instructions of Bluetooth...................................................................................20
Troubleshooting………………………………………………………..………....21
Specications…………………………………….. ………………………...…......22
BEFORE USE
Danger! High Voltage! Electric Shock If Opened!
Operate with Caution! Please refer to the related operating
instructions.
Label for Class II Products (Dual Insulation)
To replace the power cord, use the product with the
r.
To avoid electric shock, use the right power cord and
insert it properly.
Laser parts are used in this System. If instructions
described in this Manual are not followed in operating or
adjusting the System, personnel may be exposed to radiation.
WARNING:
Precautions:
Hazardous
Operation:
T
System in the rain or in a place with high humidity. Do not
open the System without permission, for the parts inside may
have high voltage.
Do not open or repair the System. Such work should be done
Visible or invisible radiations may be sent out when the
System is opened. Therefore, do not open the System so as
to avoid radiation.
1
Safety Information
2
Safety Information and Maintenance
Please read through this Manual and understand the warning signs and
indications on the parts. Keep the Manual properly for the use of the future.
All parts are specially designed and manufactured so as to ensure safety.
Power supply: Follow the descriptions
on the label and use the power cord
properly.
Keep all parts away from
moisture.
Avoid direct sunshine and high
temperature.
Do not open the cover. Otherwise,
needles, hairpins or coins may fall
into the equipment.
Protect the power cables. Do not
allow it to be pressed by heavy
objects, nor step on it. Do not
stretch or bend it excessively.
If the System is not used for
a long time, unplug the power
cord from the outlet.
Disk Protection
To clean a dirty disk, you should use a clean rag and clean it in
a linear way and from inside to outside.
Keep the player, battery and disk away from environment with
moisture, rain, dust or high temperature (which comes from
heating equipment or direct rays). Keep the disk tray moved in
so as to avoid dust.
Do not apply any soluble substances, such as benzene, thinner,
cleaning agent and anti-static spray, to the color disk.
When the Player is suddenly moved from a cold environment to
a warm environment, water can be condensed on the lens of the
player, which may lead the failure of the disk. In this case, put
the Player in the warm environment till the condensed water on
the lens is totally evaporated.
3
Disk Protection
Operating Environment
Disk Protection
Disk Protection
Structure of Disk Contents
Interference
Condensed Water
When the System works for a long time,
the panels at the top and bottom of the
device can become warm.
When the device is not used, take out
the disk and unplug the power cord.
If it is not used for a long time, the
System may malfunction or its
performance becomes deteriorated. For
that reason, the device should be
operated occasionally.
Do not place foreign objects onto the
disk tray.
Do not put the device in an environment
with:
Heat source or enclosed space (like in a
car);
High temperature (≥40 ) or high
humidity (90%);
Dirt;
Direct sunshine.
Keep the device away from TV, radio
and video recorder so as to avoid
distorted image or sound.
Condensed water may appear on the
device in the cases below:
When it is moved from cold environment
to a warm one, and vise versa;
When it is used in a space with a running
air conditioner system and the cold air
contacts the device;
When it is in the house with much steam
or high humidity.
A device with condensed water may not
work properly. In this case, you can plug
the power cord and keep the machine
running idle for about 2-3 hours. And
the water can be evaporated after the
temperature rises. If the power cord
remains unplugged, water won’t be
condensed on the device.
Do not touch the Replay button.
Do not stick tape or paper onto the
disk. To clean a disk, use a wetted
rag rst, then a dry rag.
To avoid damage to the device, do
not apply any soluble substances,
such as benzene and anti-static
spray with ethylene-based substance,
to the disk.
Do not seal up the disk in a place
close heat source, nor in a bathroom
or close to a humidier.
Seal up the disk in a box, the top of
which shall have no heavy objects.
Normally, the digitalized video disk
comprises of dierent titles that are
made up of chapters.
Audio disk is made up of tracks.
Each title, chapter and track has a
number, respectively called title
number, chapter number and track
number. But some disks may not
have such numbers.
Set the Size of TV Screen
Accessories
TV screens always have a special proportion that corresponds to its size.
TV
Screen
Displayed part
Common
4:3
4:3
16:9
16:9
Full Screen
Mailbox Type
Wide Screen
unit 1 piece
2.0 Speaker 1 set
Remote control 1 piece
FM antenna 1 piece
Audio/video cable 1 sets
User’s Manual 1 piece
4
System Connection
Please refer to the drawing below for system connection. Do not plug the power
cord before the connection is completed.
Note:
1. Make sure the source cables are properly connected. Otherwise, no audio
contents will be output or other failures come out.
2. Make sure the power cord is unplugged before removing or inserting the
connecting cables. Otherwise, the device or other parts may be damaged.
5
R/8 L/8
S- Video output
Video output
Tape
Audio Output
FM Antenne
FM Antenne
Inside Amplier
Power Output
Right Speaker
TV
Left Speaker
Left
Channel
YUV Output
Right
Channel
Inside Amplier
Power Output
Dolby Amplier
Basic Functions
Preparation
If you want to watch the disk
contents, turn on the TV, select
the video mode and connect TV
to the DVD Player.
Playing
1. Press the Power button to start
the device. At the time, directions
will appear on the screen, and LED
illuminated. If the disk is not inserted,
words “no disk” will appear on the
screen. If inserted with the tray, the
device will play the disk automatically.
2. Press ON/OFF to withdraw the disk
tray. The device can accept two types
of disks. Follow the indications on the
disk to insert it. Failure to follow such
indication may cause damage to the
disk and malfunction of the player.
Do not put incompatible disks into
the device.
3. Press ON/OFF to move in the disk
tray, and the device will start playing
automatically. Some disks might not
be played automatically, and the user
should manually make selections in
the main interface to start the playing.
You can press Enter/Play on the remote
control or select the corresponding
number for that purpose.
Stop Playing
1. Press Stop to enter the stop mode.
At the time, the “start-up” icons will
appear on the TV screen. The Player
can memorize the stopped place.
2. Press Enter/Play, and the device
will play the disk from the stopped
placed or from the beginning.
3.Press Stop twice to stop playing
completely.
Previous/Next Track
In playing mode, you can press
Previous to go back to the beginning
of the chapter. Each time you press
Previous, the system will jump back
one chapter till it reaches the starting
chapter.
In playing mode, you can press
Next to play the next chapter.
Fast Forward/Reverse
1. Press Fast Forward (FF) to fast
play the contents of the disk. The
playing speed changes each time
you press this button.
2. Press Enter/Play to restore the
normal playing state.
3. Press Fast Reverse (FR) to fast
reverse the contents of the disk.
The playing speed changes each
time you press this button.
4. Press Enter/Play to restore the
normal playing state.
Pause/Stop
1. In playing mode, press Pause/Stop
to make the playing pause. In pause
mode, the system is in mute state.
2. Press Pause/Stop again, and the
system will show the next interface
of the contents.
3. Press Enter/Play to restore the
normal playing state.
Note:
1. If the mark appears on the screen,
it means this operation is forbidden in
this device or disk.
2.The device is controlled by CPU with
settings, and the Screensaver mode
might be activated. You can press any
key to start the device.
6
Advanced Functions
NOTE: The functions said below are only applicable to DVD les. And dierent
DVD player may provide dierent functions.
Display
Press Display, and such options for
disk info as “played title”, “current title”,
“played chapter”, “current chapter” and
“close” to appear on the screen.
Video Mode
Press the Mode key to set the video
output as CVBS, YUV or P-Scan.
Note: Press this key once, and the
black screen will appear.
So, press it till the normal screen state
comes back. If the image is interfered
or no image appears on the screen,
you can press Mode to solve the
problem.
Subtitle
Title
Press Subtitle, and all options for subtitle
will appear on the screen.
The language of the subtitle shown for the
rst time is the default value of the device.
For example, if “01/02 English” is used as
the subtitle, you can press the Subtitle
again to allow the screen to other
languages, like 02/02 XX.
“01” refers to the current language.
“02” refers to the total number of
languages used in the system
(subject to DVD Player’s model).
Press this key, and the main interface
of the system will appear on the screen.
The user can make options according
to his preference. (This key is eective
only when submenus exist)
Menu
Press this key, and the main interface
of the system will appear on the screen.
The user can make options according
to his preference.(This key is ee
ctive only when submenus exist)
Angle
Press this key to view the DVD
contents from dierent angle.
GOTO
Use this key to choose chapters
and time while watching DVD
contents.
If you want to choose a chapter
whose number has to digits, you
can press “10+” to set the number.
Press Time to select the chapter
in accordance with the following
contents displayed on the screen:
Title 02/Chapter (enter the required
digits)/32
Press Time twice to select the time
when the DVD contents are played.
The information below will appear
on the screen:
Title 02/10 time : :
Press Time thrice to select the time
point in the chapter. The information
below will appear on the screen:
Chapter 01/32 Time : :
Volume and Mute
Press the key [+] to turn up the
volume and [-] to turn it down.
Press Mute to set the system in
the mute mote (no sound). Press
Mute again to restore the normal
playing state.
Repeat
Perform the operations below to
repeat the chapter, DVD title and
the whole DVD contents.
Press Repeat once to repeat the
7
contents of the chapter.
Press it twice to repeat the
contents of the title.
Press it thrice to repeat the
whole contents of the DVD disk.
Press it for the fourth time
to cancel the repeat mode.
Note: For disks with such formats
as CD, JPEG, Kodak Picture,
WMA, MP3, HDCD and CD+G,
you should use the main interface
of the system to repeat the playing.
Zoom
Press this key to zoom in the image.
In this mode, the user can also use
the navigation keys to move the
image.
A-B
The user can also mark one
section of the DVD contents
and allow the system to play
it repeatedly. To that eect,
choose the starting point you
want to repeat and press the
key A-B to set Point A when
the DVD contents are being
played, and press it again to
set Point B as ending point.
Then the part between A and
B will be played repeatedly.
Press the key A-B for the third
place to cancel the state.
Slow
Press the key Slow to slow down
the playing. Each time you press
this key, the playing speed changes
as follows:
1/2→►1/4→►1/8→►1/16.
Source
Choose signal source among
DVD/FM/LINE IN/BT.
Language
Some DVD Players supports multiple
languages. Press the key Language,
and the rst audio selection will
appear on the screen. Then you can
make options. Press the key again to
move to another option.
For example,
Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Return
In playing mode, you can press Return
to enter the main menu. Press it again
to return to the interface where all
contents of the DVD disk are displayed.
In playing S-VCD and VCD 2.0 disks,
you can press the key Return to return
to the Menu interface, and at the time,
the main interface will appear.
PBC
With the key PBC (play back control),
the system can provide advanced
selection when VCD disk is being
played. Press this key to enter the
related interface (for some disks, the
PBC interface can be reached
automatically). Then press the numeric
keys to make the options. Press the
key again to exit the options.
Programme
With this function, the user can
programme the chapters and play them
in accordance with his own will.Press
Programme, and the chapters list will
appear on the screen, where the user
can choose the desired chapter and
programme it. After that, the user can
move the curser to select the starting
mark. At the time, the system will start
“channel playing”, where the “channel
mark” will appear on the screen.
8
Special Functions
Audio CD Playback
When a disk with CD format is inserted into the device, the System can play its
contents automatically.
Press Previous/Next to change the track, and FF/FR to fast forward or fast
reverse the contents.
Note: A CD+G disk is equal to an Audio CD.
MP3 Playback
When a disk with MP3 format is about to be
played, the system will automatically display
the navigation interface while the contents are
being uploaded.
In the navigation interface, use the key Up/Downto make options. After
In all the tracks, use the key Up/Down to make options. After selection, press
Enter/Play to play the track.
In the current interface, press the key Left to return to the previous menu, and
press Previous/Next to enter the previous and next page.
Kodak Picture CD Disc Playback
When a disk with Kodak Picture format is about to be played, the system will
automatically display the navigation interface while the contents are being
uploaded.
In the navigation interface, use the key Up/Down to make options. After
In all the tracks, use the key Up/Down to make options. After selection, press
Enter/Play to play the track.
Each picture of the Kodak Picture CD will be displayed as slide, whose size is
automatically adjusted in accordance with the proportion of the TV.
Press the key Main Interface to return to the main interface.
Press Pause to allow the playing pause and the current picture will remain still.
Press Previous/Next to view the previous and next picture.
Press Enter/Play to return the slide mode. Note: The quality of the picture
displayed is subject to the model of the device used for viewing.
JPEG Disk Playback
When a disk with JPEG format is about to be played, the system will automati-
cally display the navigation interface while the contents are being uploaded.
In the navigation interface, use the key Up/Down to make options. After
r.
Press Previous/Next to select the previous and next picture.
Press Pause to allow the picture-playing pause so that you can view for a
longer time. Press Enter/Play to return to the normal playing state.
9
System Setup
A.TV Display
B. Angle Mark
C. OSD Language
D. Captions
Select the key Set on the remote
control, and the setup interface
will appear on the screen.
1. The user can use the keys
“Up/Down/Left/Right” to make
selections. However, it would be
dicult to use the cursor of the
remote control to perform the
operation. You can press Enter/Play
to make the option, and press Left to
return to the previous interface.
2. Press Set to exit the setup interface.
Interface for Normal Settings
With this interface, you can set the
displaying format of the TV screen,
the video mode and all functions
relating to DVD contents.
With this item, you can select the
displaying format of the TV screen
according to your preference. The
proportion of the displayed part on
the screen is subject to the nature
of the disk and of the TV (refer to
Page 20: Multiple Image Sizes).
In any selected displaying format,
a picture recorded with 4:3 proportion
will always be displayed with the same
width-height proportion.
In the case of DVD disk, the displaying
format might change. You can refer to the
related information for details. If the
contents of DVD disk are recorded
with 16:9 format and the TV displays
the image with proportion of 4:3, the
image will be compacted when
displayed.
Some DVD titles are recorded with
special format. In this case, whatever
displaying format the user selects,
the DVD titles with the original format
will be displayed on the screen.
In playing the DVD contents, the user
can choose one camera angle from
the options to display the contents.
The user can set the OSD language
thorough this item.
For those suering from hearing, the
supplementary narrations recorded
can be displayed on the screen.
10
E.Screen saver
F. HDCD
B. SPDIF output mode
G. Last Memory
Note: This function is only eective
for those disks with hidden subtitles.
After the system enters the stop
state for several minutes, the
screensaver mode will be enabled
and a moving image will appear on
the screen.
HDCD is the short form of “high
density compact disk”.
If the power fails abruptly, the
DVD Player can memorize the
place where the playing was
stopped. When the power is
restored, the system can play
the disk from the stopped place.
Setting the Speaker
You can use this item to set
Left/Right Channel or Stereo
DOWNMIX Mode
1 indicates the left channel.
2 indicates the right channel.
Use this item to set the SPDIF output
mode. In original SPDIF mode, the
user can only adjust the volume of
MP3 contents, not for contents with
DVD or CD format.
This DVD Player provides three audio
output options.
Disable SPDIF: In this analog
surround mode, the cables at the rear
of the panel are connected to the two
audio output ports to output the audio
source.
11
A. Dual Mono
A. Component
B. TV Mode
C. Quality
B. Dynamic
Original or modied SPDIF: With this
surround format, the audio source is
output through the Dolby digital decoder
formed on the basis of the optical mouse
at the rear panel and the co-axial connector.
Interface for setting Dolby digital surround
If the user’s microphone/decoder can
output Dolby digital surround source,
he can select stereo, left channel, right
channel or mix channel.
Set this item to play the audio
contents in high volume at night
while not disturbing others. This
item can lower the volume, but keep
the original sound quality. The gure
below shows the range to be set from
the lowest to the highest volume, with
the unit dB.
Video Setup
Use this item to set the video
output.
Set the TV mode in this device
the same as the user’s TV. If
the image is interfered or no
image appears, press V-Mode
to adjust.
Use this item to set the image
quality of the output video.
12
Sharpness
Brightness
Use this item to set the brightness
of the output video.
Press the key Right, and the
interface below will appear:
Then press Left/Right to adjust
the brightness, and press
Enter/Play to conrm the selection.
At the same time, the screen
returns to the previous interface.
Contrast
You can set the contrast through
the interface of Video setting.
Press the key Right to reach the
interface.
Then press Left/Right to adjust the
contrast through the numbers, and
press Enter/Play to conrm the
selection. At the same time, the
screen returns to the previous
interface.
13
Default Setting
The item Default Setting appears
only when the machine was not used.
To activate the adjustment, you have
to restart the machine.
A. TV Type
This DVD Player supports a variety
of TV standards, such as MULTI
(AUTO), NTSC and PAL.
If your TV only supports NTSC or
PAL standard, the TV screen will
blink with black and white spots
when a wrong standard is selected.
In this case, you should press Set
and go to the interface of default
proper standard to play the contents.
Note: To set the TV standards:
1. You can choose from the two
options, NTSC and PAL, from the
DVD Player;
2. Refer to the table below, which
shows the TV standard matched
by the respective disk:
B. Audio
You can choose the item Audio in
the preference interface to set the
audio output of the DVD contents.
C. Subtitle
Set the preferred language as the
default value of the DVD Player’s
subtitle. (Subject to compatibility
of DVD Player)
D. Disc Menu
Set the preferred language as the
default value of the main interface
of the DVD Player. (Subject to
compatibility of DVD Player)
14
DVD
E. Parental Control
F. Change the Password
G. Default
With the item Channel Supervision,
you can set the examination class
for DVD disk, so that family members
can view the contents in accordance
with their respective age group. 8
examination classes are available.
Press Left/Right to make the selection,
and press Enter/Play to conrm it. At
the time, the system will return to the
previous interface.
You can change the password so
that your family members can watch
the disk. To do that, enter the
preference interface and select
Then password. Press Password
and enter a four-digit password.
Note: To avoid oblivion, you may
write down the set password.
You have to enter the old password
before you enter the new one
(default password: 1234).
Use the item Default, you can
restore the default settings
(except the password). To do that,
choose the item Default in the
preference interface, and press
Enter/Play to restore the factory
defaults.
15
Copy Contents of CD, MP3 and AVI to USB Device
Please make sure the movable USB device has enough memory space that can
accept all contents from DVD Player.
CD Taking-In
1. Basic setting: This DVD Player can read the
contents in CD, USB device and have enough
memory.
2. After the contents of CD are read, press Copy to
prop up the new options (see the picture below).
Then press Up/Down/Left/Right to make selections.
3. After the contents of CD are taken in, press Exit
to the take-in interface.
Copy Contents of MP3 and AVI
1. Basic setting: This DVD Player can read contents
of MP3 and USB device, and have enough memory.
2. After the contents of MP3 are read, press Stop.
After you
press Copy, the related dialogue box will prop up.
At the time, press Enter.
3.
will prop up. Press Enter to complete the copying
process.
4. To copy contents of AVI format, use the same
procedure as MP3.
Note: It is normal to see “disk being reading” dialogue box.
16
FIGURE 1 FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
17
MIC SETUP
Use the right arrow button to select
status ofkaraoke, may set to AUTO
or OFF.
Use the UP/DOWNbutton to
increase or decrease the karaoke
1 volume
Use the UP/DOWN button to
increase or decrease the echo
level.
Playing Radio functions
1. The frequency the embedded radio receives in the system ranges from
87.50MH~ 108 MHz.
2. In playing mode of the DVD Player, press the key Signal Source to switch to
FM mode. Then press the key Search on the remote control, and the system
will search the channels and save 1-20 of them.
3. You can press Previous/Next to select the channel you like, and use Fast
Forward or Fast Reverse to tune manually.
Multimedia
1. The System supports USB device and is compatible with les with such
formats as JPEG, MP3, AVI and WMA.
2. It also supports SD card and is compatible with les with such formats as
JPEG, MP3, AVI and WMA.
3. Play contents in USB device: Contents in USB device can be played only
when there is no disk or card inside the player. If so, the player will play the
contents automatically after properly connected.
4. Play contents SD card: Contents in SD card can be played only when there
is no disk or USB device inside the player. If so, the player will play the contents
automatically after properly connected.
Note:
A: If malfunction exists in memory device, the player won’t play its cont
18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114

Sunstech NSX100BTDVD Mode d'emploi

Taper
Mode d'emploi