JVC KD-R482 Manuel utilisateur

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ENGLISH

FRANÇAIS

DEUTSCH

РУCCKИЙ

B5A-1625-00 [E]

KD-R484 / KD-R482

CD RECEIVER

INSTRUCTION MANUAL

RÉCEPTEUR CD

MANUEL D’INSTRUCTIONS

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

JS_JVC_KD_R484_E_C_00_draft 3.indd 1JS_JVC_KD_R484_E_C_00_draft 3.indd 1 7/29/2016 5:10:37 PM7/29/2016 5:10:37 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

i

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as

household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of

handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper

recycling and waste disposal will help conserve resources whilst preventing detrimental effects

on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques

et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte

sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne

peuvent pas être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés

sur des sites capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage

adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des

leurs effets nocifs sur notre santé et sur l’environnement.

Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient

du plomb.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist

darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,

sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten

und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und

die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere

Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den

kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок

службы (годности) данного товара “по истечении которого он может представлять

опасность для жизни, здоровья потребителя, причинять вред его имуществу или

окружающей среде” составляет семь (7) лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с

ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических

материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других

прав потребителя, в частности, гарантийного обслуживания JVC, которое он может

получить в соответствии с законом о правах потребителя или других законов, связанных

с ним.

Условия хранения:

Температура: от –30°C до +85°C

Влажность: от 0% до 90%

JS_JVC_KD_R484_E_C_00_draft 3.indd iJS_JVC_KD_R484_E_C_00_draft 3.indd i 8/12/2016 12:31:08 PM8/12/2016 12:31:08 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ii

For Israel

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that

have been classified as Class 1. It means that the unit is utilizing laser beams that are of a

weaker class. There is no danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des

rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il

n’y a pas de danger de radiation accidentelle hors de l’appareil.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente

Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf

hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören.

Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche

Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует

лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи

слабой интенсивности. Они не представляют опасности и не распространяют опасную

радиацию вне устройства.

JS_JVC_KD_R484_E_C_00_draft 3.indd iiJS_JVC_KD_R484_E_C_00_draft 3.indd ii 7/29/2016 5:10:38 PM7/29/2016 5:10:38 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iii

English

Hereby, JVCKENWOOD declares that the radio

equipment “KD-R484/KD-R482” is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

http://www.jvc.net/cs/car/eudoc/

Français

Par la présente, JVCKENWOOD déclare que

l’équipement radio « KD-R484/KD-R482 » est conforme

à la directive 2014/53/UE.

L’intégralité de la déclaration de conformité UE est

disponible à l’adresse Internet suivante :

http://www.jvc.net/cs/car/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät

“KD-R484/KD-R482” der Richtlinie

2014/53/EU entspricht.

Der volle Text der EU-Konformitätserklärung steht

unter der folgenden Internetadresse zur Verfügung:

http://www.jvc.net/cs/car/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur

“KD-R484/KD-R482” in overeenstemming is met

Richtlijn 2014/53/EU.

De volledige tekst van de EU-verklaring van

overeenstemming is te vinden op het volgende

internetadres:

http://www.jvc.net/cs/car/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che

l΄apparecchio radio “KD-R484/KD-R482” è conforme

alla Direttiva 2014/53/UE.

Il testo integrale della dichiarazione di conformità UE è

disponibile al seguente indirizzo internet:

http://www.jvc.net/cs/car/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo

de radio “KD-R484/KD-R482” cumple la Directiva

2014/53/EU.

El texto completo de la declaración de conformidad

con la UE está disponible en la siguiente dirección de

internet:

http://www.jvc.net/cs/car/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o

equipamento de rádio “KD-R484/KD-R482” está em

conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade da UE

está disponível no seguinte endereço de internet:

http://www.jvc.net/cs/car/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy

“KD-R484/KD-R482” jest zgodny z dyrektywą

2014/53/UE.

Pełny tekst deklaracji zgodności EU jest dostępny pod

adresem:

http://www.jvc.net/cs/car/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové

zařízení “KD-R484/KD-R482” splňuje podmínky

směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný na

následující internetové adrese:

http://www.jvc.net/cs/car/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a

„KD-R484/KD-R482“ rádióberendezés megfelel a

2014/53/EU irányelvnek.

Az EU konformitási nyilatkozat teljes szövege az alábbi

weboldalon érhető el:

http://www.jvc.net/cs/car/eudoc/

Declaration of Conformity with regard to the RE Directive 2014/53/EU

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVC Technical Services Europe GmbH

Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany

Déclaration de conformité se rapportant à la directive RE 2014/53/EU

Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Représentants dans l’UE:

JVC Technical Services Europe GmbH

Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVC Technical Services Europe GmbH

Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany

Декларация соответствия относительно Директивы RE 2014/53/EU

Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представительство в ЕС:

JVC Technical Services Europe GmbH

Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany

JS_JVC_KD_R484_E_C_00_draft 3.indd iiiJS_JVC_KD_R484_E_C_00_draft 3.indd iii 7/29/2016 5:10:38 PM7/29/2016 5:10:38 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iv

Svenska

Härmed försäkrar JVCKENWOOD att

radioutrustningen “KD-R484/KD-R482” är i

enlighet med direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran

om överensstämmelse finns på följande

Internetadress :

http://www.jvc.net/cs/car/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite

“KD-R484/KD-R482” on direktiivin 2014/53/EU

mukainen.

EU-vaatimustenmukaisuusvakuutusvaatimus

löytyy kokonaisuudessaan seuraavasta internet-

osoitteesta:

http://www.jvc.net/cs/car/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska

oprema »KD-R484/KD-R482« v skladu z Direktivo

2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

dostopno na tem spletnem naslovu:

http://www.jvc.net/cs/car/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

rádiové zariadenie „KD-R484/KD-R482“ vyhovuje

smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na

nasledovnej internetovej adrese:

http://www.jvc.net/cs/car/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret

“KD-R484/KD-R482” er i overensstemmelse med

Direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde ordlyd

er tilgængelig på følgende internetadresse:

http://www.jvc.net/cs/car/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι

ο ραδιοεξοπλισμός «KD-R484/KD-R482»

συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

στο διαδίκτυο:

http://www.jvc.net/cs/car/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et

„KD-R484/KD-R482“ raadiovarustus on vastavuses

direktiiviga 2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on

kättesaadav järgmisel internetiaadressil:

http://www.jvc.net/cs/car/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra

„KD-R484/KD-R482” atbilst direktīvas

2014/53/ES prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā tīmekļa adresē:

http://www.jvc.net/cs/car/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga

„KD-R484/KD-R482“ atitinka 2014/53/EB

direktyvos reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą

galite rasti šiuo internetiniu adresu:

http://www.jvc.net/cs/car/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir

tar-radju “KD-R484/KD-R482” huwa konformi

mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

disponibbli fl-indirizz intranet li ġej:

http://www.jvc.net/cs/car/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema

“KD-R484/KD-R482” u skladu s Direktivom

2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o

usklađenosti dostupan je na sljedećoj internet

adresi:

http://www.jvc.net/cs/car/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că

echipamentul radio “KD-R484/KD-R482” este în

conformitate cu Directiva 2014/53/UE.

Textul integral al declarației de conformitate UE este

disponibil la urmatoarea adresă de internet:

http://www.jvc.net/cs/car/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че

радиооборудването на “KD-R484/KD-R482” е в

съответствие с Директива 2014/53/ЕС.

Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет

адрес:

http://www.jvc.net/cs/car/eudoc/

Turkish

Burada, JVCKENWOOD “KD-R484/KD-R482”

radyo ekipmanının 2014/53/AB Direktifine uygun

olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni

aşağıdaki internet adresinde mevcuttur.

http://www.jvc.net/cs/car/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что

радиооборудование «KD-R484/KD-R482»

соответствует Директиве 2014/53/EU.

Полный текст декларации соответствия

ЕС доступен по следующему адресу в сети

Интернет:

http://www.jvc.net/cs/car/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,

що радіообладнання «KD-R484/KD-R482»

відповідає Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС

можна знайти в Інтернеті за такою адресою:

http://www.jvc.net/cs/car/eudoc/

JS_JVC_KD_R484_E_C_00_draft 3.indd ivJS_JVC_KD_R484_E_C_00_draft 3.indd iv 7/29/2016 5:10:38 PM7/29/2016 5:10:38 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

2

ENGLISH

CONTENTS BEFORE USE

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important

that you read and observe Warning and Caution in this manual.

• Please keep the manual in a safe and accessible place for future reference.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded

data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short

circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to

evaporate.

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1

Cancel the demonstration

2 Set the clock and date

3 Set the basic settings

CD/USB/ANDROID 5

RADIO 7

AUX 8

AUDIO SETTINGS 9

DISPLAY SETTINGS 11

REFERENCES 12

Maintenance

More information

TROUBLESHOOTING 13

INSTALLATION/

CONNECTION 14

SPECIFICATIONS 17

How to read this manual

• Operations are explained mainly using buttons on the faceplate of

KD-R484

.

• English indications are used for the purpose of explanation. You can select the display language from the

menu.

( 4)

•

[XX]

indicates the selected items.

•

( XX)

indicates references are available on the stated page.

JS_JVC_KD_R484_E_EN_5.indd 2JS_JVC_KD_R484_E_EN_5.indd 2 7/29/2016 5:10:54 PM7/29/2016 5:10:54 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

3

ENGLISH

BASICS

To On the faceplate

Turn on the power

Press

.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Press the volume knob to mute the sound or pause playback.

• Press again to cancel.

Select a source

• Press

repeatedly.

• Press

, then turn the volume knob within 2 seconds.

Change the display information

Press

repeatedly.

( 13)

Attach

How to reset

Detach

Your preset adjustments

will be erased except stored

radio stations.

Faceplate

Volume knob Loading slot

Detach button

Display window

JS_JVC_KD_R484_E_EN_5.indd 3JS_JVC_KD_R484_E_EN_5.indd 3 7/29/2016 5:10:55 PM7/29/2016 5:10:55 PM

ENGLISH

4

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

Cancel the demonstration

When you turn on the power (or after you reset the unit), the display

shows: “CANCEL DEMO”

“PRESS” “VOLUME KNOB”

1 Press the volume knob.

[YES]

is selected for the initial setup.

2 Press the volume knob again.

“DEMO OFF” appears.

Set the clock and date

1

Press and hold .

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCK ADJUST]

, then press the

knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the

knob.

6 Turn the volume knob to select

[12H]

or

[24H]

, then press the

knob.

To set the date

7 Turn the volume knob to select

[DATE SET]

, then press the knob.

8 Turn the volume knob to make the settings, then press the knob.

Day

Month Year

9 Press to exit.

To return to the previous setting item, press .

1

2

Set the basic settings

1

Press and hold .

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press .

Default:

XX

SYSTEM

KEY BEEP

ON

:Activates the keypress tone.;

OFF

:Deactivates.

SOURCE SELECT

AM SRC

*

ON

:Enables AM in source selection.;

OFF

:Disables.

( 7)

BUILT-IN AUX

*

ON

:Enables AUX in source selection.;

OFF

:Disables.

( 8)

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not

activated).

For details on how to update the firmware, see:

<http://www.jvc.net/cs/car/>.

CLOCK

TIME SYNC

ON

:The clock time is automatically set using the Clock Time (CT) data in FM

Radio Data System signal.;

OFF

:Cancels.

CLOCK DISPLAY ON

:The clock time is shown on the display even when the unit is turned off.;

OFF

:Cancels.

ENGLISH

Select the display language for menu and music information if applicable.

By default,

ENGLISH

is selected.

РУССКИЙ

ESPANOL

*

Not displayed when the corresponding source is selected.

3

JS_JVC_KD_R484_E_EN_5.indd 4JS_JVC_KD_R484_E_EN_5.indd 4 7/29/2016 5:10:56 PM7/29/2016 5:10:56 PM

ENGLISH

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD/USB/ANDROID

To directly select USB/ANDROID source, press .

To On the faceplate

Reverse/Fast-forward

*

3

Press and hold .

Select a track/file Press

.

Select a folder

*

4

Press .

Repeat play

*

3

Press repeatedly.

TRACK REPEAT

/

ALL REPEAT

: Audio CD

TRACK REPEAT

/

FOLDER REPEAT

/

ALL REPEAT

: MP3/WMA/WAV/FLAC file

ONE REPEAT

/

ALL REPEAT

/

REPEAT OFF

: ANDROID

Random play

*

3

Press repeatedly.

ALL RANDOM

/

RANDOM OFF

: Audio CD

FOLDER RANDOM

/

ALL RANDOM

/

RANDOM OFF

: MP3/WMA/WAV/FLAC file

SONG RANDOM

/

ALL RANDOM

/

RANDOM OFF

: ANDROID

*

1

Do not leave the cable inside the car when not using.

*

2

When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install

the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.

For more information, visit <http://www.jvc.net/cs/car/>.

*

3

For ANDROID: Applicable only when

[AUTO MODE]

is selected.

( 6)

*

4

For CD: Only for MP3/WMA files. This does not work for ANDROID.

Start playback

The source changes automatically and

playback starts.

CD

Eject disc

Label side

USB input terminal

USB 2.0 cable

*

1

(commercially available)

Micro USB 2.0 cable

*

1

(commercially available)

USB

ANDROID

*

2

JS_JVC_KD_R484_E_EN_5.indd 5JS_JVC_KD_R484_E_EN_5.indd 5 7/29/2016 5:10:56 PM7/29/2016 5:10:56 PM

ENGLISH

6

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Select control mode

While in ANDROID source, press repeatedly.

AUTO MODE

: Control Android device from this unit via JVC MUSIC PLAY

application installed in the Android device.

AUDIO MODE

: Control Android device using the Android device itself via

other media player applications installed in the Android device.

However, you can still play/pause or file skip from this unit.

Select music drive

While in USB source, press repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

Select a file from a folder/list

For ANDROID, applicable only when

[AUTO MODE]

is selected.

1 Press .

2 Turn the volume knob to select a folder/list, then press the

knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list

quickly.

Alphabet search

(applicable only for ANDROID source)

You can search for a file according to the first character.

1 Press to enter character search.

2 Turn the volume knob to select the desired character.

^A^ : Upper case (A to Z)

_A_ : Lower case (a to z)

-0- : Numbers (0 to 9)

-OTHERS- : Character other than A to Z, 0 to 9

3 Press the volume knob to start searching.

• To return to the previous setting item, press

.

• To cancel, press and hold

.

CD/USB/ANDROID

JS_JVC_KD_R484_E_EN_5.indd 6JS_JVC_KD_R484_E_EN_5.indd 6 8/8/2016 2:06:51 PM8/8/2016 2:06:51 PM

ENGLISH

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Search for a station

1

Press repeatedly to select FM or AM.

2 Press to search for a station automatically.

(or)

Press and hold until “M” flashes, then press repeatedly to search for a

station manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station

While listening to a station....

Press and hold one of the number buttons (1 to 6).

(or)

1 Press and hold the volume knob until “PRESETMODE” flashes.

2 Turn the volume knob to select a preset number, then press the knob.

The preset number flashes and “MEMORY” appears.

Select a stored station

Press one of the number buttons (1to6).

(or)

1 Press .

2 Turn the volume knob to select a preset number, then press the knob.

Other settings

1

Press and hold .

2 Turn the volume knob to select an item

(

see the

following table

)

, then press the knob.

3 Repeat step 2 until the desired item is selected/

activated or follow the instructions stated on the

selected item.

4 Press to exit.

To return to the previous setting item, press .

Default:

XX

TUNER SETTING

RADIO TIMER

Turns on the radio at a specific time regardless of the current

source.

1

ONCE

/

DAILY

/

WEEKLY

/

OFF

:Select how often the timer

will be turned on.

2

FM

/

AM

:Select the band.

3

01

to

18

(for FM)/

01

to

06

(for AM):Select the preset

station.

4

Set the activation day

*

1

and time.

“

M

” lights up when complete.

Radio Timer will not activate for the following cases.

•

The unit is turned off.

•

[OFF]

is selected for

[AM SRC]

in

[SOURCE SELECT]

after

Radio Timer for AM is selected.

( 4)

SSM

SSM 01–06

/

SSM 07–12

/

SSM 13–18

: Automatically

presets up to 18 stations for FM. “SSM” stops flashing

when the first 6 stations are stored. Select

SSM 07–12

/

SSM 13–18

to store the following 12 stations.

*

1

Selectable only when

[ONCE]

or

[WEEKLY]

is selected in step

1

.

JS_JVC_KD_R484_E_EN_5.indd 7JS_JVC_KD_R484_E_EN_5.indd 7 7/29/2016 5:10:57 PM7/29/2016 5:10:57 PM

ENGLISH

8

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

LOCAL SEEK ON

:Searches only FM stations with good reception.;

OFF

:Cancels.

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

IF BAND AUTO

:Increases the tuner selectivity to reduce interference noises from

adjacent FM stations. (Stereo effect may be lost.);

WIDE

:Subjects to

interference noises from adjacent FM stations, but sound quality will not be

degraded and the stereo effect will remain.

MONO SET ON

:Improves the FM reception, but the stereo effect will be lost.;

OFF

:Cancels.

NEWS SET

*

2

ON

:The unit will temporarily switch to News Programme if available.;

OFF

:Cancels.

REGIONAL

*

2

ON

: Switches to another station only in the specific region using the “AF”

control.;

OFF

:Cancels.

AF SET

*

2

ON

: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception

when the current reception is poor.;

OFF

: Cancels.

TI

*

2

ON

: Allows the unit to temporarily switch to Traffic Information if available

(“TI” lights up). ;

OFF

:Cancels.

PTY SEARCH

*

2

Select a PTY code (see below).

If there is a station broadcasting a program of the same PTY code as you

have selected, that station is tuned in.

*

2

Only for FM source.

PTY code

NEWS

,

AFFAIRS

,

INFO

,

SPORT

,

EDUCATE

,

DRAMA

,

CULTURE

,

SCIENCE

,

VARIED

,

POP

M

(music),

ROCK M

(music),

EASY M

(music),

LIGHT M

(music),

CLASSICS

,

OTHER

M

(music),

WEATHER

,

FINANCE

,

CHILDREN

,

SOCIAL

,

RELIGION

,

PHONE IN

,

TRAVEL

,

LEISURE

,

JAZZ

,

COUNTRY

,

NATION M

(music),

OLDIES

,

FOLK M

(music),

DOCUMENT

Use a portable audio player

1

Connect a portable audio player (commercially available).

2 Select

[ON]

for

[BUILT-IN AUX]

in

[SOURCE SELECT]

.

( 4)

3 Press repeatedly to select AUX.

4 Turn on the portable audio player and start playback.

Use a 3-core plug head stereo mini plug for optimum audio

output.

3.5mm stereo mini plug with “L” shaped connector

(commercially available)

Portable audio player

Auxiliary input jack

AUX

JS_JVC_KD_R484_E_EN_5.indd 8JS_JVC_KD_R484_E_EN_5.indd 8 7/29/2016 5:10:57 PM7/29/2016 5:10:57 PM

ENGLISH

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

Default:

XX

EQ SETTING

PRESET EQ

Select a preset equalizer suitable to the music genre.

•

Select

[USER]

to use the settings made in

[EASY EQ]

or

[PRO EQ]

.

FLAT

/

DRVN 3

/

DRVN 2

/

DRVN 1

/

HARD ROCK

/

HIP HOP

/

JAZZ

/

POP

/

R&B

/

TALK

/

USER

/

VOCAL BOOST

/

BASS BOOST

/

CLASSICAL

/

DANCE

EASY EQ

Adjust your own sound settings.

•

The settings are stored to

[USER]

.

•

The settings made may affect the current settings of

[PRO EQ]

.

SUB.W SP

*

1

*

2

:

00

to

+06

(Default:

03

SUB.W

*

1

*

3

:

–08

to

+08

00

BASS

:

LVL–06

to

LVL+06

LVL 00

MID

:

LVL–06

to

LVL+06

LVL 00

TRE

:

LVL–06

to

LVL+06

LVL 00

)

PRO EQ

1

BASS

/

MIDDLE

/

TREBLE

:Select a sound tone.

2

Adjust the sound elements of the selected sound tone.

•

The settings are stored to

[USER]

.

•

The settings made may affect the current settings of

[EASY EQ]

.

BASS

Frequency:

60HZ

/

80HZ

/

100HZ

/

200HZ

(Default:

80HZ

Level:

LVL–06

to

LVL+06

LVL 00

Q:

Q1.0

/

Q1.25

/

Q1.5

/

Q2.0

Q1.0

)

MIDDLE

Frequency:

0.5KHZ

/

1.0KHZ

/

1.5KHZ

/

2.5KHZ

(Default:

1.0KHZ

Level:

LVL–06

to

LVL+06

LVL 00

Q:

Q0.75

/

Q1.0

/

Q1.25

)

TREBLE

Frequency:

10.0KHZ

/

12.5KHZ

/

15.0KHZ

/

17.5KHZ

(Default:

10.0KHZ

Level:

LVL–06

to

LVL+06

LVL 00

Q:

Q FIX

)

AUDIO CONTROL

BASS BOOST

LEVEL +01

to

LEVEL +05

(

LEVEL +01

): Selects your preferred bass boost level.;

OFF

:Cancels.

*

1

Displayed only when

[SUBWOOFER SET]

is set to

[ON]

.

( 10)

*

2

Displayed only when

[SPK/PRE



OUT]

is set to

[SUB.W/SUB.W]

.

( 10)

*

3

Displayed only when

[SPK/PRE OUT]

is set to

[REAR/SUB.W]

or

[SUB.W/SUB.W]

.

( 10)

Select a preset equalizer

Press repeatedly.

(or)

Press

, then turn the volume knob within 5seconds.

Preset equalizer

:

FLAT

(default),

DRVN 3

,

DRVN 2

,

DRVN 1

,

HARD ROCK

,

HIP HOP

,

JAZZ

,

POP

,

R&B

,

TALK

,

USER

,

VOCAL BOOST

,

BASS BOOST

,

CLASSICAL

,

DANCE

Store your own sound settings

1

Press and hold to enter EASY EQ setting.

2 Turn the volume knob to select an item, then press the knob.

Refer to

[EASY EQ]

for setting and the result is stored to

[USER]

.

• To return to the previous setting item, press .

• To exit, press

.

Other settings

1

Press and hold .

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or

follow the instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press .

JS_JVC_KD_R484_E_EN_5.indd 9JS_JVC_KD_R484_E_EN_5.indd 9 8/8/2016 2:07:07 PM8/8/2016 2:07:07 PM

ENGLISH

10

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

LOUDNESS

LEVEL 01

/

LEVEL 02

:Boosts low or high frequencies to produce a well-

balanced sound at low volume.;

OFF

:Cancels.

SUB.W LEVEL

*

4

SPK-OUT

*

5

SUB.W 00

to

SUB.W +06

(

SUB.W +03

):Adjusts the

output level of the subwoofer connected via speaker lead.

(

16)

PRE-OUT

*

6

SUB.W –08

to

SUB.W +08

(

SUB.W 00

):Adjusts the

output level of the subwoofer connected to the lineout

terminals (REAR/SW) through an external amplifier.

( 16)

SUBWOOFER SET

*

6

ON

: Turns on the subwoofer output.;

OFF

: Cancels.

SUBWOOFER



LPF

*

4

FRQ THROUGH

:All signals are sent to the subwoofer;

FRQ 55HZ

/

FRQ 85HZ

/

FRQ 120HZ

:Audio signals with frequencies lower

than 55Hz/85Hz/120Hz are sent to the subwoofer.

SUB.W PHASE

*

4

REVERSE

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

output to be in line with the speaker output for optimum performance.

(Selectable only if a setting other than

[FRQ THROUGH]

is selected for

[SUBWOOFER LPF]

.)

FADER

POSITION R06

to

POSITION F06

(

POSITION 00

):Adjusts the front and

rear speaker output balance.

BALANCE

*

7

POSITION L06

to

POSITION R06

(

POSITION 00

):Adjusts the left and

right speaker output balance.

VOLUME



ADJUST

LEVEL –15

to

LEVEL +06

(

LEVEL 00

):Preset the initial volume level of

each source (compared to the FM volume level). Before adjustment, select

the source you want to adjust. (“VOLADJFIX” appears if FM is selected.)

AMP



GAIN

LOW POWER

:Limits the maximum volume level to 25. (Select if the

maximum power of each speaker is less than 50W to prevent damaging

the speakers.);

HIGH POWER

:The maximum volume level is 35.

*

4

Displayed only when

[SUBWOOFER SET]

is set to

[ON]

.

*

5

Displayed only when

[SPK/PRE OUT]

is set to

[SUB.W/SUB.W]

.

*

6

Displayed only when

[SPK/PRE OUT]

is set to

[REAR/SUB.W]

or

[SUB.W/SUB.W]

.

*

7

This adjustment will not affect the subwoofer output.

D.T.EXPANDER

(Digital Track

Expander)

ON

:Creates realistic sound by compensating the high-frequency

components and restoring the rise-time of the waveform that are lost in

audio data compression.;

OFF

:Cancels.

SPK/PRE OUT

Depending on the speaker connection method, select the appropriate

setting to get the desired output. (



Speaker output settings

)

Speaker output settings

Select the output setting for the speakers

[SPK/PRE OUT]

, base on the

speaker connection method.

Connection via lineout terminals

For connections through an external amplifier.

( 16)

Setting on

[SPK/PRE OUT]

Audio signal through lineout terminal

REAR/SW

REAR/REAR

Rear speakers output

REAR/SUB.W

(default) Subwoofer output

SUB.W/SUB.W

Subwoofer output

Connection via speaker leads

For connections without using an external amplifier. However, with

this settings you can also enjoy the subwoofer output.

( 16)

Setting on

[SPK/PRE OUT]

Audio signal through rear speaker lead

L (left) R (right)

REAR/REAR

Rear speakers output Rear speakers output

REAR/SUB.W

(default) Rear speakers output Rear speakers output

SUB.W/SUB.W

Subwoofer output (Mute)

If

[SUB.W/SUB.W]

is selected:

–

[FRQ 120HZ]

is selected in

[SUBWOOFER LPF]

and

[FRQ THROUGH]

is not

available.

–

[POSITION R01]

is selected in

[FADER]

and selectable range is

[POSITION R06]

to

[POSITION 00]

.

JS_JVC_KD_R484_E_EN_5.indd 10JS_JVC_KD_R484_E_EN_5.indd 10 8/8/2016 2:07:23 PM8/8/2016 2:07:23 PM

ENGLISH

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

1 Press and hold .

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press .

Default:

XX

DISPLAY

DIMMER

Dim the illumination.

OFF

:Dimmer is turned off. Brightness changes to

[DAY]

setting.

ON

:Dimmer is turned on. Brightness changes to

[NIGHT]

setting.

(



[BRIGHTNESS]

)

DIMMER TIME

:Set the dimmer on and off time.

1

Turn the volume knob to adjust the

[ON]

time, then press the knob.

2

Turn the volume knob to adjust the

[OFF]

time, then press the knob.

(Default:

[ON]

:

18:00

;

[OFF]

:

6:00

)

DIMMER AUTO

:Dimmer turns on and off automatically when you turn off or

on the car headlights.

*

1

DISPLAY SETTINGS

BRIGHTNESS

Set the brightness for day and night separately.

1

DAY

/

NIGHT

:Select day or night.

2

Select a zone.

3

LEVEL 00

to

LEVEL 31

:

Set the brightness level.

(Default:

BUTTON ZONE

:

DAY

:

LEVEL 25

;

NIGHT

:

LEVEL 09

DISP ZONE

:

DAY

:

LEVEL 31

;

NIGHT

:

LEVEL 12

)

TEXT SCROLL

*

2

SCROLL ONCE

:Scrolls the display information once.;

SCROLL AUTO

:Repeats scrolling at 5-second intervals.;

SCROLL OFF

:Cancels.

*

1

The illumination control wire connection is required.

( 16)

*

2

Some characters or symbols will not be shown correctly (or will be blanked).

JS_JVC_KD_R484_E_EN_5.indd 11JS_JVC_KD_R484_E_EN_5.indd 11 8/8/2016 2:07:38 PM8/8/2016 2:07:38 PM

ENGLISH

12

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to

damage the connector.

Handling discs:

•

Do not touch the recording surface of the disc.

•

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•

Do not use any accessories for the disc.

•

Clean from the center of the disc and move outward.

•

Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•

When removing discs from this unit, pull them out horizontally.

•

Remove burrs from the center hole and disc edge before inserting a disc.

More information

For: – Latest firmware updates and latest compatible item list

– Any other latest information

Visit <http://www.jvc.net/cs/car/>.

General

•

This unit can only play the following CDs:

•

This unit can play back multi-session discs; however, unclosed sessions will be skipped

during playback.

•

DualDisc playback:

The Non-DVD side of a “DualDisc” does not comply with the “Compact

Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product

cannot be recommended.

•

For detailed information and notes about the playable audio files, visit

<http://www.jvc.net/cs/car/>.

REFERENCES

Playable files

•

Playable audio file:

For disc: MP3 (.mp3), WMA (.wma)

For USB mass storage class device: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name

•

Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible

depending on the types or conditions of media or device.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

•

8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS4.1 and above) may not fully support Android Open Accessory

(AOA)2.0.

•

If the Android device supports both mass storage class device and AOA2.0, this unit always

playback via AOA2.0 as priority.

Connector (on the reverse

side of the faceplate)

JS_JVC_KD_R484_E_EN_5.indd 12JS_JVC_KD_R484_E_EN_5.indd 12 7/29/2016 5:10:58 PM7/29/2016 5:10:58 PM

ENGLISH

13

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Change the display information

Each time you press , the display information changes.

•

If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other

information (eg. station name) appears.

Source name Display information

FM

or

AM

Frequency (Date/Clock)

(For FM Radio Data System stations only)

Station name (PS)/Program type (PTY) (Date/Clock) Radiotext (Date/

Clock)

Radiotext+ (Radiotext+) Song title (Artist) Song title

(Date/Clock)

Frequency (Date/Clock) (back to the beginning)

CD

or

USB (For CD-DA)

Track title (Artist) Track title (Disc title) Track title (Date/Clock)

Playing time (Date/Clock)

(backtothebeginning)

(For MP3/WMA/WAV/FLAC files)

Song title (Artist) Song title (Album name) Song title (Date/Clock)

File name (Folder name) File name (Date/Clock) Playing time

(Date/Clock)

(backtothebeginning)

ANDROID

When

[AUTO MODE]

is selected

( 6):

Song title (Artist) Song title (Album name) Song title (Date/Clock)

Playing time (Date/Clock) (backtothebeginning)

AUX

AUX (Date/Clock)

Available Cyrillic letters

Available characters

Display indications

REFERENCES TROUBLESHOOTING

Symptom Remedy

General

Sound cannot be heard.

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

“MISWIRING CHECK

WIRING THEN PWR ON”

appears.

Turn the power off, then check to be sure the terminals of

the speaker wires are insulated properly. Turn the power

on again.

“PROTECTING SEND

SERVICE” appears.

Send the unit to the nearest service center.

Source cannot be selected.

Check the

[SOURCE SELECT]

setting.

( 4)

Radio

•

Radio reception is poor.

•

Static noise while

listening to the radio.

Connect the antenna firmly.

CD/USB

Disc cannot be ejected.

Press and hold to forcibly eject the disc. Be careful not

to drop the disc when it is ejected.

“IN DISC” appears.

Make sure nothing is blocking the loading slot when you

eject the disc.

“PLEASEEJECT” appears.

Press , then insert the disc correctly.

Playback order is not as

intended.

The playback order is determined by the file name (USB)

or the order in which files were recorded (disc).

Elapsed playing time is not

correct.

This depends on the recording process earlier.

“NOT SUPPORT” appears

and track skips.

Check whether the track is a playable format.

( 12)

“READING” keeps flashing.

•

Do not use too many hierarchical levels and folders.

•

Reload the disc or reattach the USB device.

“CANNOT PLAY” flashes

and/or connected device

cannot be detected.

•

Check whether the connected device is compatible with

this unit and ensure the files are in supported formats.

( 12)

•

Reattach the device.

JS_JVC_KD_R484_E_EN_5.indd 13JS_JVC_KD_R484_E_EN_5.indd 13 7/29/2016 5:10:58 PM7/29/2016 5:10:58 PM

ENGLISH

14

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Symptom Remedy

CD/USB

Correct characters are not

displayed.

•

This unit can only display uppercase letters, numbers,

and a limited number of symbols.

•

Depending on the display language you have selected

( 4)

, some characters may not be displayed correctly.

ANDROID

•

Sound cannot be heard

during playback.

•

Sound output only from

the Android device.

•

Reconnect the Android device.

•

If in

[AUDIO MODE]

, launch any media player

application on the Android device and start playback.

•

If in

[AUDIO MODE]

, relaunch the current media player

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit.

( 12)

Cannot playback at

[AUTO MODE]

.

•

Make sure JVC MUSIC PLAY APP is installed on the

Android device.

( 5)

•

Reconnect the Android device and select the appropriate

control mode.

( 6)

•

If this does not solve the problem, the connected Android

device does not support

[AUTO MODE]

.

( 12)

“NO DEVICE” or “READING”

keeps flashing.

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support

[AUTO MODE]

.

( 12)

Playback is intermittent or

sound skips.

Turn off the power saving mode on the Android device.

“CANNOT PLAY”

•

Make sure Android device contains playable audio files.

•

Reconnect the Android device.

•

Restart the Android device.

If you still have troubles, reset the unit.

( 3)

TROUBLESHOOTING INSTALLATION/CONNECTION

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire

(black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during

and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect

them in parallel.

•

Connect speakers with a maximum power of more than 50W. If the maximum power of

the speakers is lower than 50W, change the

[AMP GAIN]

setting to avoid damaging the

speakers.

( 10)

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)

to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned

on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are

working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old

fuse with one that has the same rating.

Basic procedure

1

Remove the key from the ignition switch, then disconnect the

[

terminal of the car

battery.

2

Connect the wires properly.

See Wiring connection.

( 16)

3

Install the unit to your car.

See Installing the unit (in-dash mounting).

( 15)

4

Connect the terminal of the car battery.

5

Reset the unit.

( 3)

JS_JVC_KD_R484_E_EN_5.indd 14JS_JVC_KD_R484_E_EN_5.indd 14 7/29/2016 5:10:59 PM7/29/2016 5:10:59 PM

ENGLISH

15

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

INSTALLATION/CONNECTION

How to remove the unit

When installing without the mounting sleeve

1

Remove the mounting sleeve and trim plate from the unit.

2

Align the holes in the unit (on both sides) with the vehicle

mounting bracket and secure the unit with screws (commercially

available).

Use only the specified screws. Using wrong screws might damage the

unit.

Installing the unit (in-dash mounting)

Do the required wiring.

( 16)

Bend the appropriate tabs to

hold the sleeve firmly in place.

Hook on the top side

Orientate the trim plate as

illustrated before fitting.

Dashboard of

your car

Part list for installation

(C)

Mounting sleeve

(B)

Trim plate

(D)

Wiring harness

(E)

Extraction key

(A)

Faceplate

JS_JVC_KD_R484_E_EN_5.indd 15JS_JVC_KD_R484_E_EN_5.indd 15 7/29/2016 5:11:00 PM7/29/2016 5:11:00 PM

ENGLISH

16

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

When connecting to an external

amplifier, connect its ground wire to the

car’s chassis to avoid damaging the unit.

Wiring connection

Fuse (10A)

Antenna terminal

Light blue/yellow

(Steering remote

control wire)

To the steering wheel remote control adapter

Yellow (A4)

Red (A7)

Yellow (Battery wire)

Color and function

A4 Yellow : Battery

A5 Blue/White : Power control

A6 Orange/white : Car light control switch

A7 Red : Ignition (ACC)

A8 Black : Earth (ground) connection

B1

Purple

]

: Rear speaker (right)

B2

Purple/black

[

B3

Gray

]

: Front speaker (right)

B4

Gray/black

[

B5

White

]

: Front speaker (left)

B6

White/black

[

B7

Green

]

: Rear speaker (left)

*

B8

Green/black

[

Unit

Connecting the ISO connectors on some VW/

Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied

wiring harness as illustrated below.

Vehicle

A7 (Red)

Ignition wire

(Red)

A4 (Yellow)

Default wiring

Battery wire

(Yellow)

*

You can also connect a subwoofer speaker directly without

an external subwoofer amplifier. For setting,



10

.

ISO connectors

If your car does not have an ISO terminal

We recommend installing the unit with a commercially

available custom wiring harness specific for your car and

leave this job to professionals for your safety. Consult

your car audio dealer.

INSTALLATION/CONNECTION

Rear/subwoofer output

Red (Ignition wire)

JS_JVC_KD_R484_E_EN_5.indd 16JS_JVC_KD_R484_E_EN_5.indd 16 8/8/2016 2:07:55 PM8/8/2016 2:07:55 PM

La page est en cours de chargement...

JVC KD-R482 Manuel utilisateur

Ce manuel convient également à

JVC KD-R482 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents