Wacker Neuson WP1540W Manuel utilisateur

Operator’s

Manual

Notice

d’emploi

Vibroplate

WP 1540

WP 1540W

5000403062 01 0411

5 0 0 0 4 0 3 0 6

2

Copyright

notice

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the machine. Any

other type of reproduction is prohibited without express written permission from

Wacker Neuson Corporation.

Any type of reproduction or distribution not authorized by Wacker Neuson Corporation

represents an infringement of valid copyrights. Violators will be prosecuted.

Trademarks All trademarks referenced in this manual are the property of their respective owners.

Manufacturer Wacker Neuson Manila Incorporated

Lot 2,Blk 1 Phase , PEZA Drive, First Cavite Industrial Estate, Brgy. Langkaan

Dasmariñas, Cavite, Philippines

Tel: +63-(0)2-580-7136 Fax: +63-(0)2-580-712

www.wackerneuson.com

Translated

instruction

s

This Operator’s Manual presents a translation of the original instructions. The original

language of this Operator’s Manual is American English.

WP 1540 Table of

Contents

Foreword

3

1. Emission System Control Information 4

2. Safety Information 9

2.1 Laws Pertaining to Spark Arresters .................................................... 10

2.2 Operating Safety ................................................................................ 11

2.3 Operator Safety while using Internal Combustion Engines ................ 12

2.4 Service Safety .................................................................................... 13

2.5 Label Locations .................................................................................. 14

2.6 Warning and Informational Labels ...................................................... 15

2.7 Operating Labels ................................................................................ 18

3. Technical Data 20

3.1 Engine Data ........................................................................................ 20

3.2 Plate Data ........................................................................................... 21

3.3 Sound and Vibration Specifications .................................................... 21

3.4 Dimensions ......................................................................................... 22

4. Operation 23

4.1 Recommended Fuel ........................................................................... 23

4.2 Before Starting ................................................................................... 23

4.3 To Start ............................................................................................... 24

4.4 To Stop ............................................................................................... 24

4.5 Application .......................................................................................... 25

4.6 Operation ............................................................................................ 26

4.7 Wheel Kit (0162986) ........................................................................... 27

wpm_bo5000190613_11TOC.fm

1

wpm_bo5000190613_11TOC.fm

Table of Contents WP

1540

5. Maintenance 28

5.1 Maintaining the Emission Control System............................................28

5.2 Periodic Maintenance Schedule ..........................................................28

5.3 Drive Belt .............................................................................................30

5.4 Exciter Lubrication ...............................................................................31

5.5 Spark Plug ...........................................................................................32

5.6 Engine Oil ............................................................................................33

5.7 Air Cleaner ..........................................................................................34

5.8 Cleaning Fuel Strainer .........................................................................35

5.9 Troubleshooting ...................................................................................36

5.10 Storage ................................................................................................36

5.11 Lifting Machine ....................................................................................37

5.12 Transporting Machine ..........................................................................38

2

Foreword

WARNING

CALIFORNIA

Proposition 65 Warning:

Engine exhaust, some of its constituents, and certain vehicle

components, contain or emit chemicals known to the State of

California to cause cancer and birth defects or other reproductive

harm.

This manual provides information and procedures to safely operate

and maintain this Wacker Neuson model. For your own safety and

protection from injury, carefully read, understand and observe the

safety instructions described in this manual.

Keep this manual or a copy of it with the machine. If you lose this

manual or need an additional copy, please contact Wacker Neuson

Corporation. This machine is built with user safety in mind; however,

it can present hazards if improperly operated and serviced. Follow

operating instructions carefully! If you have questions about operating

or servicing this equipment, please contact Wacker Neuson

Corporation.

The information contained in this manual was based on machines in

production at the time of publication. Wacker Neuson Corporation

reserves the right to change any portion of this information without

notice.

All rights, especially copying and distribution rights, are reserved.

No part of this publication may be reproduced in any form or by any

means, electronic or mechanical, including photocopying, without

express written permission from Wacker Neuson Corporation.

Any type of reproduction or distribution not authorized by Wacker

Neuson Corporation represents an infringement of valid copyrights

and will be prosecuted. We expressly reserve the right to make

technical modifications, even without due notice, which aim at

improving our machines or their safety standards.

wc_tx000001gb.fm

3

Emission Control Systems Information and Warranty

1 Emission Control Systems Information and Warranty

The Emission Control Warranty and associated information is valid only for the

U.S.A., its territories, and Canada.

1.1 Emission Control System Background Information

Introduction

Wacker Neuson spark-ignited engines/equipment must conform with applicable

Environmental Protection Agency (EPA) and the State of California emissions

regulations. There are two types of emissions that fall under these regulations: 1)

exhaust, and 2) evaporative. These regulations require that manufacturers warrant

the emission control systems for defects in materials and workmanship.

Furthermore, EPA and California regulations require all manufacturers to furnish

written instructions describing how to operate and maintain the engines/equipment

including the emission control systems. This information is provided with

all

Wacker

Neuson engines/equipment at the time of purchase.

Exhaust Emissions

The combustion process produces carbon monoxide, oxides of nitrogen, and

hydrocarbons. Control of hydrocarbons and oxides of nitrogen is very important

because, under certain conditions, they react to form photochemical smog when

subjected to sunlight. Carbon monoxide does not react in the same way, but it is

toxic.

Wacker Neuson utilizes lean carburetor settings and other systems to reduce the

emissions of carbon monoxide, oxides of nitrogen, and hydrocarbons.

Evaporative Emissions

Evaporative emissions are fuel emissions and generally include emissions that

result from permeation of fuel through the fuel-system materials or from ventilation

of the fuel system.

Wacker Neuson utilizes low-permeation fuel lines and fuel tanks where applicable

to reduce evaporative emissions.

Problems that may affect Emissions

If any of the following symptoms arise, have the engine/equipment inspected and

repaired by a Wacker Neuson dealer/service center.

Hard starting or stalling after starting

Rough idling

Misfiring or backfiring under load

Afterburning (backfiring)

Presence of black exhaust smoke during operation

High fuel consumption

4

wpm_tx001756gb.fm

Emission Control Systems Information and Warranty

Tampering and Altering

Tampering with or altering the emission control system may increase emissions

beyond the legal limit. If evidence of tampering is found, Wacker Neuson may deny

a warranty claim. Among those acts that constitute tampering are:

Removing or altering of any part of the air intake, fuel, or exhaust systems.

Altering or defeating the speed-adjusting mechanism causing the engine to

operate outside its design parameters.

1.2 Limited Defect Warranty for Wacker Neuson Emission Control

Systems

The Emission Control Warranty is valid only for the U.S.A., its territories, and

Canada.

Wacker Neuson Sales Americas, LLC, N92 W15000 Anthony

Avenue,

Menomonee

Falls, WI 53051, (hereinafter “Wacker Neuson”) warrants to the initial

retail purchaser, and each subsequent owner, that this

engine/equipment,

including

all parts of its emission control systems, have been designed, built, and

equipped

to

conform at the time of initial sale to all applicable emission regulations of

the

U.S.

Environmental Protection Agency (EPA), and that the engine/equipment

is

free

of defects in materials and workmanship which would cause this engine/

equipment to fail to conform to EPA regulations during its warranty period.

Wacker Neuson is also liable for damages to other engine/equipment components

caused by a failure of any warranted parts during the warranty period.

Limited Defect Warranty Period for Wacker Neuson Emission Control

Systems

The warranty period for this engine/equipment begins on the date of sale to the

initial purchaser and continues for a minimum of two (2) years. For the warranty

terms for your specific engine/equipment, visit wackerneuson.com.

Any implied warranties are limited to the duration of this written warranty.

What is covered

Wacker Neuson recommends the use of genuine Wacker Neuson parts, or the

equivalent, whenever maintenance is performed. The use of replacement parts not

equivalent to the original parts may impair the effectiveness of the engine/

equipment emission controls systems. If such a replacement part is used in the

repair or maintenance of the engine/equipment, assure yourself that such part is

warranted by its manufacturer to be equivalent to the parts offered by Wacker

Neuson in performance and durability. Furthermore, if such a replacement part is

used in the repair or maintenance of the engine/equipment, and an authorized

Wacker Neuson dealer/service center determines it is defective or causes a failure

of a warranted part, the claim for repair of the engine/equipment may be denied. If

the part in question is not related to the reason the engine/equipment requires

repair, the claim will not be denied.

For the components listed in the following table, an authorized Wacker Neuson

dealer/service center will, at no cost to you, make the necessary diagnosis, repair,

or replacement necessary to ensure that the engine/equipment complies with the

wpm_tx001756gb.fm

5

Emission Control Systems Information and Warranty

applicable EPA regulations. All defective parts replaced under this warranty

become property of Wacker Neuson.

Exhaust Emissions

Systems Covered

Components

Carburetor and internal parts

Air/fuel ratio feedback system

(if applicable)

Cold start enrichment system

(if applicable)

Fuel metering system

Regulator assembly (if applicable)

Catalytic muffler (if applicable)

Exhaust system

Exhaust manifold (if applicable)

Air filter housing

Air filter element*

Air induction system

Intake manifold (if applicable)

Flywheel magneto

Ignition module

Electronic controls (if applicable)

Spark advance/retard system (if

applicable)

Spark plug cap

Ignition system

Spark plug*

Tubing

Fittings

Seals

Gaskets

Miscellaneous parts associated with the

exhaust emission control system

Clamps

* Indicates expendable maintenance items. Warranted only to first scheduled replacement point.

Evaporative Emissions

Systems Covered

Components

Fuel tank (if applicable)

Fuel tank cap (if applicable)

Fuel line (if applicable)

Fuel line fittings (if applicable)

Clamps (if applicable)

Carbon canister (if applicable)

Evaporative control system

Purge port connector (if applicable)

Clamps

Gaskets

Miscellaneous parts associated with the

evaporative emission control system

Mounting brackets

6

wpm_tx001756gb.fm

Emission Control Systems Information and Warranty

What is not covered

Failures other than those resulting from defects in material or

workmanship

.

Any systems or parts which are affected or damaged by owner abuse,

tampering, neglect, improper maintenance, misuse, improper fueling,

improper storage, accident and/or collision; the incorporation of, or any use

of, add-on or modified parts, or unsuitable attachments, or the alteration of

any part.

Replacement of expendable maintenance items made in connection with

required maintenance services after the item’s first scheduled replacement

as listed in the maintenance section of the engine/equipment operator’s

manual, such as spark plugs and filters.

Incidental or consequential damages such as loss of time or the use of the

engine/equipment, or any commercial loss due to the failure of the engine/

equipment.

Diagnosis and inspection charges that do not result in warranty-eligible

service being performed.

Any non-authorized replacement part, or malfunction of authorized parts due

to use of-non authorized parts.

Owner’s Warranty Responsibility

The engine/equipment owner is responsible for the performance of the required

maintenance listed in the Wacker Neuson engine/equipment operator’s manual.

Wacker Neuson recommends that all receipts covering maintenance on the

engine/equipment be retained, but Wacker Neuson cannot deny

warranty

coverage

solely for the lack of receipts or for the failure to ensure the performance

of all scheduled maintenance.

Normal maintenance, replacement, or repair of emission control devices and

systems may be performed by any repair establishment or individual; however,

warranty repairs must be performed by an authorized Wacker Neuson dealer/

service center.

The engine/equipment must be presented to an authorized Wacker Neuson dealer/

service center as soon as a problem exists. Contact Wacker Neuson Product

Support Department (1-800-770-0957) or visit wackerneuson.com to find a dealer/

service center in your area, or to answer questions regarding warranty rights and

responsibilities.

How to Make a Claim

In the event that any emission-related part is found to be defective during the

warranty period, you shall notify Wacker Neuson Product Support Department (1-

800-770-0957), and you will be advised of the appropriate dealer/service center

where warranty repair can be performed. All repairs qualifying under this limited

warranty must be performed by an authorized Wacker Neuson dealer/service

center.

You must take your Wacker Neuson engine/equipment along with proof of original

purchase date, at your expense, to the authorized Wacker Neuson dealer/service

center during their normal business hours.

wpm_tx001756gb.fm

7

Emission Control Systems Information and Warranty

For owners located more than 100 miles from an authorized dealer/service center

(excluding the states with high-altitude areas as identified in 40 CFR Part 1068,

Appendix III), Wacker Neuson will pay for pre-approved shipping costs to and from

an authorized Wacker Neuson dealer/service center.

Claims for repair or adjustment found to be caused solely by defects in material or

workmanship will not be denied because the engine/equipment was not properly

maintained and used.

The warranty repairs should be completed in a reasonable amount of time, not to

exceed 30 days.

8

wpm_tx001756gb.fm

9

wpm_si000325gb.fm

WP 1540 Safety Information

2. Safety Information

This manual contains DANGER, WARNING, CAUTION, NOTICE, and

NOTE signal words which must be followed to reduce the possibility

of personal injury, damage to the equipment, or improper service.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER

WARNING

CAUTION

DANGER indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

NOTICE: Used without the safety alert symbol, NOTICE indicates a

situation which, if not avoided, could result in property damage.

Note: Contains additional information important to a procedure.

10

wpm_si000325gb.fm

Safety Information WP 1540

2.1 Laws Pertaining to Spark Arresters

Notice: State Health Safety Codes and Public Resources Codes

specify that in certain locations spark arresters be used on internal

combustion engines that use hydrocarbon fuels. A spark arrester is a

device designed to prevent accidental discharge of sparks or flames

from the engine exhaust. Spark arresters are qualified and rated by

the United States Forest Service for this purpose.

In order to comply with local laws regarding spark arresters, consult

the engine distributor or the local Health and Safety Administrator.

11

wpm_si000325gb.fm

WP 1540 Safety Information

2.2 Operating Safety

Familiarity and proper training are required for the safe operation of the

machine. Machines operated improperly or by untrained personnel

can be hazardous. Read the operating instructions contained in this

WARNING

manual and the engine manual, and familiarize yourself with the

location and proper use of all controls. Inexperienced operators should

receive instruction from someone familiar with the machine before

being allowed to operate it.

2.2.1 Do not allow anyone to operate this equipment without proper training.

People operating this equipment must be familiar with the risks and

hazards associated with it.

2.2.2 Do not touch the engine or muffler while the engine is on or

immediately after it has been turned off. These areas get hot and may

cause burns.

2.2.3 Do not use accessories or attachments that are not recommended by

Wacker Neuson. Damage to equipment and injury to the user may

result.

2.2.4 NEVER operate the machine with the beltguard missing. Exposed

drive belt and pulleys create potentially dangerous hazards that can

cause serious injuries.

2.2.5 Never leave the machine running unattended.

2.2.6 Be sure operator is familiar with proper safety precautions and

operation techniques before using machine.

2.2.7 Always wear protective clothing appropriate to the job site when

operating the machine.

2.2.8 Wear hearing protection when operating equipment.

2.2.9 Close fuel valve on engines equipped with one when machine is not

being operated.

2.2.10 Store the machine properly when it is not being used. The machine

should be stored in a clean, dry location out of the reach of children.

2.2.11 Always operate machine with all safety devices and guards in place

and in working order. Do not modify or defeat safety devices. Do not

operate machine if any safety devices or guards are missing or

inoperative.

2.2.12 Read, understand, and follow procedures in the Operator’s Manual

before attempting to operate the machine.

12

wpm_si000325gb.fm

Safety Information WP

1540

2.3 Operator Safety while using Internal Combustion Engi

nes

Internal combustion engines present special hazards during operation

and fueling. Read and follow the warning instructions in the engine

owner’s manual and the safety guidelines below. Failure to follow the

WARNING

warnings and safety standards could result in severe injury or death.

2.3.1 DO NOT run the machine indoors or in an enclosed area such as a

deep trench unless adequate ventilation, through such items as

exhaust fans or hoses, is provided. Exhaust gas from the engine

contains poisonous carbon monoxide gas; exposure to carbon

monoxide can cause loss of consciousness and may lead to death.

2.3.2 Do not smoke while operating the machine.

2.3.3 Do not smoke when refueling the engine.

2.3.4 Do not refuel a hot or running engine.

2.3.5 Do not refuel the engine near an open flame.

2.3.6 Do not spill fuel when refueling the engine.

2.3.7 Do not run the engine near open flames.

2.3.8 Refill the fuel tank in a well-ventilated area.

2.3.9 Replace the fuel tank cap after refueling.

2.3.10 ALWAYS check the fuel lines and the fuel tank for leaks and cracks

before starting the engine. Do not run the machine if fuel leaks are

present or the fuel lines are loose.

13

wpm_si000325gb.fm

WP 1540 Safety Information

2.4 Service Safety

WARNING

A poorly maintained machine can become a safety hazard! In order

for the machine to operate safely and properly over a long period of

time, periodic maintenance and occasional repairs are necessary.

2.4.1 Do not attempt to clean or service the machine while it is running.

Rotating parts can cause severe injury.

2.4.2 Do not crank a flooded engine with the spark plug removed on

gasoline-powered engines. Fuel trapped in the cylinder will squirt out

the spark plug opening.

2.4.3 Do not test for spark on gasoline-powered engines if the engine is

flooded or the smell of gasoline is present. A stray spark could ignite

the fumes.

2.4.4 Do not use gasoline or other types of fuels or flammable solvents to

clean parts, especially in enclosed areas. Fumes from fuels and

solvents can become explosive.

2.4.5 Keep the area around the muffler free of debris such as leaves, paper,

cartons, etc. A hot muffler could ignite the debris and start a fire.

2.4.6 Replace worn or damaged components with spare parts designed and

approved by Wacker Neuson.

2.4.7 Disconnect the spark plug on machines equipped with gasoline

engines, before servicing, to avoid accidental start-up.

2.4.8 Keep the machine clean and labels legible. Replace all missing and

hard-to-read labels. Labels provide important operating instructions

and warn of dangers and hazards.

14

wpm_si000325gb.fm

Safety Information WP 1540

2.5 Label Locations

wpmgr005960

WARNING

WARNUNG

ADVERTENCIA

AVERTISSEMENT

10W30

1 2 3 4 5 6 7

1

2

15

wpm_si000325gb.fm

WP 1540 Safety Information

2.6 Warning and Informational Labels

Wacker Neuson machines use international pictorial labels where

needed. These labels are described below.

Label Meaning

WARNING!

To prevent hearing loss, wear hearing protec-

tion when operating the machine.

Read the Operator’s Manual for machine infor-

mation.

Check engine oil level.

Use SAE10W30.

Check the fuel level.

WARNING!

Hot surface!

Guaranteed sound power level in dB(A).

16

wpm_si000325gb.fm

Safety Information WP 1540

Label Meaning

WARNING!

Hand injury if caught in moving belt.

Always replace beltguard.

CAUTION!

Read and understand the supplied Operator’s

Manual before operating this machine. Failure

to do so increases the risk of injury to yourself

and others.

NOTICE

Lifting point.

DANGER!

Engines emit carbon monoxide; operate only

in well-ventilated area. Read the Operator’s

Manual.

No sparks, flames, or burning objects near the

machine. Shut off the engine before refueling.

Label-machine model

Company logo

17

wpm_si000325gb.fm

WP 1540 Safety Information

Label Meaning

A nameplate listing the model number, item

number, revision number, and serial number is

attached to each unit. Please record the infor-

mation found on this nameplate so it will be

available should the nameplate become lost or

damaged. When ordering parts or requesting

service information, you will always be asked

to specify the model number, item number,

revision number, and serial number of the unit.

This machine may be covered by one or more

patents.

18

wpm_si000325gb.fm

Safety Information WP 1540

2.7 Operating Labels

Wacker Neuson machines use international pictorial labels where

needed. These labels are described below.

Label Meaning

Open the fuel flow valve.

Push or turn engine switch to ON position.

Close the choke.

Place throttle in the IDLE position.

Pull the rewind starter.

Close the fuel flow valve.

La page charge ...

Wacker Neuson WP1540W Manuel utilisateur

Ce manuel convient également à

Wacker Neuson WP1540W Manuel utilisateur

dans d''autres langues

Documents connexes