Zanussi ZRB935NX2 Manuel utilisateur

Marque: Zanussi

Modèle: ZRB935NX2

Catégorie: Réfrigérateurs-congélateurs

Taper: Manuel utilisateur

User manual 2

Notice d'utilisation 17

Fridge Freezer

Réfrigérateur/congélateur

ZRB935NX2

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4

Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5

First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8

Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 9

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 10

Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13

Environmental concerns _ _ _ _ _ _ _ _ _ _ 15

Subject to change without notice.

Safety information

In the interest of your safety and to ensure the

correct use, before installing and first using the

appliance, read this user manual carefully, in-

cluding its hints and warnings. To avoid unnec-

essary mistakes and accidents, it is important

to ensure that all people using the appliance

are thoroughly familiar with its operation and

safety features. Save these instructions and

make sure that they remain with the appliance if

it is moved or sold, so that everyone using it

through its life will be properly informed on ap-

pliance use and safety.

For the safety of life and property keep the pre-

cautions of these user's instructions as the

manufacturer is not responsible for damages

caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by per-

sons (including children) with reduced physi-

cal, sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction con-

cerning use of the appliance by a person re-

sponsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

• Keep all packaging well away from children.

There is risk of suffocation.

• If you are discarding the appliance pull the

plug out of the socket, cut the connection

cable (as close to the appliance as you can)

and remove the door to prevent playing chil-

dren to suffer electric shock or to close

themselves into it.

• If this appliance featuring magnetic door

seals is to replace an older appliance having

a spring lock (latch) on the door or lid, be

sure to make that spring lock unusable be-

fore you discard the old appliance. This will

prevent it from becoming a death trap for a

child.

General safety

Warning!

Keep ventilation openings, in the appliance en-

closure or in the built-in structure, clear of ob-

struction.

• The appliance is intended for keeping food-

stuff and/or beverages in a normal household

as explained in this instruction booklet.

• Do not use a mechanical device or any artifi-

cial means to speed up the thawing process.

• Do not use other electrical appliances (such

as ice cream makers) inside of refrigerating

appliances, unless they are approved for this

purpose by the manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is con-

tained within the refrigerant circuit of the ap-

pliance, a natural gas with a high level of en-

vironmental compatibility, which is neverthe-

less flammable.

During transportation and installation of the

appliance, be certain that none of the com-

ponents of the refrigerant circuit become

damaged.

If the refrigerant circuit should become dam-

aged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the

appliance is situated

• It is dangerous to alter the specifications or

modify this product in any way. Any damage

www.zanussi.com

to the cord may cause a short-circuit, fire

and/or electric shock.

Warning! Any electrical component (pow-

er cord, plug, compressor) must be re-

placed by a certified service agent or qualified

service personnel to avoid hazard.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not

squashed or damaged by the back of

the appliance. A squashed or damaged

power plug may overheat and cause a

fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not

insert the power plug. There is a risk of

electric shock or fire.

6. You must not operate the appliance

without the lamp cover (if foreseen) of

interior lighting.

• This appliance is heavy. Care should be tak-

en when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are damp/

wet, as this could cause skin abrasions or

frost/freezer burns.

• Avoid prolonged exposure of the appliance

to direct sunlight.

• Bulb lamps (if foreseen) used in this appli-

ance are special purpose lamps selected for

household appliances use only. They are not

suitable for household room illumination.

Daily Use

• Do not put hot pot on the plastic parts in the

appliance.

• Do not store flammable gas and liquid in the

appliance, because they may explode.

• Do not place food products directly against

the air outlet on the rear wall. (If the appli-

ance is Frost Free)

• Frozen food must not be re-frozen once it

has been thawed out.

• Store pre-packed frozen food in accordance

with the frozen food manufacturer's instruc-

tions.

• Appliance's manufacturers storage recom-

mendations should be strictly adhered to.

Refer to relevant instructions.

• Do not place carbonated or fizzy drinks in the

freezer compartment as it creates pressure

on the container, which may cause it to ex-

plode, resulting in damage to the appliance.

• Ice lollies can cause frost burns if consumed

straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance

and disconnect the mains plug from the

mains socket.

• Do not clean the appliance with metal ob-

jects.

• Do not use sharp objects to remove frost

from the appliance. Use a plastic scraper.

• Regularly examine the drain in the refrigerator

for defrosted water. If necessary, clean the

drain. If the drain is blocked, water will col-

lect in the bottom of the appliance.

Installation

Important! For electrical connection carefully

follow the instructions given in specific

paragraphs.

• Unpack the appliance and check if there are

damages on it. Do not connect the appliance

if it is damaged. Report possible damages

immediately to the place you bought it. In that

case retain packing.

• It is advisable to wait at least four hours be-

fore connecting the appliance to allow the oil

to flow back in the compressor.

• Adequate air circulation should be around

the appliance, lacking this leads to overheat-

ing. To achieve sufficient ventilation follow

the instructions relevant to installation.

• Wherever possible the back of the product

should be against a wall to avoid touching or

catching warm parts (compressor, condens-

er) to prevent possible burn.

www.zanussi.com

• The appliance must not be located close to

radiators or cookers.

• Make sure that the mains plug is accessible

after the installation of the appliance.

• Connect to potable water supply only (If a

water connection is foreseen).

Service

• Any electrical work required to do the servic-

ing of the appliance should be carried out by

a qualified electrician or competent person.

• This product must be serviced by an author-

ized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in ei-

ther its refrigerant circuit or insulation materials.

The appliance shall not be discarded together

with the urban refuse and rubbish. The insula-

tion foam contains flammable gases: the appli-

ance shall be disposed according to the appli-

cable regulations to obtain from your local au-

thorities. Avoid damaging the cooling unit, es-

pecially at the rear near the heat exchanger.

The materials used on this appliance marked by

the symbol

are recyclable.

Product description

2 43 5 9 10 11

1213141516

71 6 8

Fruit drawers

Glass shelf

DynamicAir cooling

Control panel

Led bulb

www.zanussi.com

Butter shelf

Door shelf

Bottle shelf

Freezer basket

Maxibox basket

Freezer basket

Cold module

Rating plate

Control panel

BDE

A - Appliance button ON/OFF D - Function button

B - Temperature regulation button E - Confirmation button

C - Temperature and function indicator

Display

10 1 2 3 4

56789

Temperature indicator.

Timer function indicator.

Excessive temperature alarm.

Positive or negative temperature indica-

tor.

FreeStore function indicator.

Action Freeze function indicator.

Shopping function indicator.

Compartment indicator.

Child Lock function indicator.

Eco Mode function indicator.

First switch on

After plugging the plug into the power outlet, if

the display is not illuminated, press key (A), ap-

pliance on.

As soon as the appliance is turned on, it is in

alarm condition, the temperature flashes and

you will hear a buzzer.

Press key (E) and the buzzer will go off (also

see the section on "excessive temperature

alarm" ) the icon

still flashes and on the indi-

cator

will appear the warmest temperature

reached.

For a correct storage of the food select the Eco

mode function that guarantee the following

temperatures are set:

www.zanussi.com

+5°C in the fridge

-18°C in the freezer

• Wait until the inside compartment tempera-

ture reach -18°C, before introducing the

goods in the freezer compartment.

• To select a different temperature see "Tem-

perature regulation".

Switching off

The appliance is shut off by pressing key (A) for

more than 1 second.

During this, a countdown of the temperature

from -3 -2 -1 will be shown.

Functions Menu

By activating the key (D) the functions menu is

operating. Each function could be confirmed by

pressing button (E). If there is no confirmation

after some seconds the display will go out from

the menu and return in normal condition.

The following functions are indicated:

Select the fridge compartment

Select the freezer compartment

Eco Mode function

FreeStore function

Shopping function

Child Lock function

Drinks Chill function

Action Freeze function

Temperature regulation

Press the key (D) to select the compartment

and than the key (B) to set the necessary tem-

perature.

Press the key (E) to confirm the selection.

The temperature indicator shows the set tem-

perature. The set temperature will be reached

within 24 hours.

Fluctuations of some degrees around set tem-

perature are normal and does not mean any

fault in the appliance.

Holiday Function "H"

The holiday function sets the temperature at +

15°C.

This function allows you to keep the refrigerator

shut and empty during a long holiday period ( e.

g. the summer holidays) without the formation

of a bad smell.

To turn on the holiday function operate as per

modift the selected temperature. The tempera-

ture indicator can modify the displayed temper-

ature up to + 8 °C, 1 °at a tim. + 2 °C will be

followed by the letter "H ". Press key E to con-

firm.

Now the refrigerator is in the "holiday "function

in the energy- saving mode.

Important! The fridge compartment must be

empty with holiday function on.

Child Lock Function

The Child Lock function is activated by press-

ing key (D) (several times if necessary) until the

corresponding icon appears

You must confirm the choice by pressing key

(E) within few seconds. You will hear the buzzer

and the icon remains lighted. In this condition

any possible operation through the keys does

not cause any change as long as this function

is activated.

It is possible to de-activate the function at any

time by pressing key (D) until the correspond-

ing icon will flash and then key (E).

Shopping Function

If you need to insert a large amount of warm

food, for example after doing the grocery shop-

ping, we suggest activating the Shopping func-

tion to chill the products more rapidly and to

avoid warming the other food which is already

in the refrigerator.

The Shopping function is activated by pressing

key (D) (several times if necessary) until the

corresponding icon appears

. You must

confirm the choise by pressing key (E) within

few seconds. You will hear the buzzer and the

icon remains lighted.

The Shopping function shuts off automatically

after approximately 6 hours. It is possible to de-

activate the function at any time by pressing key

(D) until the corresponding icon will flash and

then key (E).

Eco Mode Function

Press the key (D) (several times if necessary)

until the corresponding icon appears

www.zanussi.com

Press the key (E) to confirm the selection. You

will hear the buzzer and the icon remains ligh-

ted.

In this condition the temperatures are automati-

cally set (+ 5°C and - 18°C), in the best condi-

tions for storing food.

Set a different temperature in one of the com-

partment to switch off the function.

FreeStore Function

Press the key (D) (several times if necessary)

until the corresponding icon appears

Press the key (E) to confirm the selection. You

will hear the buzzer and the icon remains ligh-

ted.

Important! If the function is activated

automatically the FreeStore icon is not shown

(refer to "Daily use").

The activation of the FreeStore function

increase the energy consumption.

Action Freeze Function

The freezer compartment is suitable for long

term storage of commercially frozen and deep-

frozen food, and for freezing fresh food.

The maximum quantity of foods to freeze in 24

hours is shown on the rating plate.

To freeze the amount of food indicated on the

rating plate, place the food directly in touch

with the cooling surface (remove the drawer or

basket). In case the food is frozen inside the

drawers or baskets, the maximum quantity is

slightly reduced.

To freeze fresh foods, you will need to activate

the Action Freeze function. Press key (D) (sev-

eral times if necessary) until

indicator ap-

pears.

You must confirm the choice by pressing key

(E) within few seconds. You will hear the buzzer

and on the display will appear some animation

with lines.

After a pre-cooling period of 24 hours, place

the foods in the freezer.

Place the food to be frozen in the

compart-

ment, as this is the coldest point.

The freezing process takes 24 hours. During

this period do not put other foods in the freezer.

This function stops automatically after 52

hours.

It is possible to deactivate the function at any

time by pressing key (D) until

indicator will

flash and then press key (E).

Drinks Chill Function

The Drinks Chill function is to be used as a

safety warning when placing bottles in the

freezer compartment. It is activated by pressing

key (D) (several times if necessary) until the

corresponding icon appears

You must confirm the choice by pressing key

(E) within few seconds. You will hear the buzzer

and the icon remains lighted.

In this condition it operates a timer with a de-

fault value of 30 min. and it could change from

1 to 90 min., by pressing key (B) you select the

minutes needed.

At the end of the selected time there are the

following indications:

•

on the indicator

the symbol flashing

•

the icon

flashing

•

the icon

flashing

• sounding of an acoustic alarm until key (E) is

pressed

At this point bear in mind to remove the drinks

contained in the freezer compartment.

It is possible to deactivate the function at any

time by pressing key (D) until the correspond-

ing icon will flash and then key (E).

Excessive temperature alarm

An increase in the temperature in a compart-

ment (for example due to an power failure) is in-

dicated by:

• flashing temperature

•

freezer compartment

flashing

•

flashing of the icon

• sounding of buzzer

When normal conditions are restored:

• the acoustic signal shuts off

• the temperature value continues to flash

When you press key (E) to de-activate the

alarm, the highest temperature reached in the

compartment appears on indicator

for

some seconds.

Then it returns on the normal operation showing

the temperature of the selected compartment.

www.zanussi.com

During the alarm phase, the buzzer can be

switched off by pressing key (E).

First use

Cleaning the interior

Before using the appliance for the first time,

wash the interior and all internal accessories

with lukewarm water and some neutral soap so

as to remove the typical smell of a brand-new

product, then dry thoroughly.

Important! Do not use detergents or abrasive

powders, as these will damage the finish.

Daily use

Freezing fresh food

The freezer compartment is suitable for freezing

fresh food and storing frozen and deep-frozen

food for a long time.

To freeze fresh food activate the Fast Freezing

function at least 24 hours before placing the

food to be frozen in the freezer compartment.

Place the fresh food to be frozen in the bottom

compartment.

The maximum amount of food that can be fro-

zen in 24 hours is specified on the rating plate,

a label located on the inside of the fridge.

The freezing process lasts 24 hours: during this

period do not add other food to be frozen.

After 24 hours, when the freezing process is

completed, deactivate the Fast Freezing func-

tion (see "Fast Freezing function").

Storage of frozen food

When first starting-up or after a period out of

use, before putting the products in the com-

partment let the appliance run at least 2 hours

on the higher settings.

Important! In the event of accidental

defrosting, for example due to a power failure, if

the power has been off for longer than the

value shown in the technical characteristics

chart under "rising time", the defrosted food

must be consumed quickly or cooked

immediately and then re-frozen (after cooling).

Thawing

Deep-frozen or frozen food, prior to being used,

can be thawed in the refrigerator compartment

or at room temperature, depending on the time

available for this operation.

Small pieces may even be cooked still frozen,

directly from the freezer: in this case, cooking

will take longer.

Movable shelves

The walls of the re-

frigerator are equip-

ped with a series of

runners so that the

shelves can be posi-

tioned as desired.

Positioning the door shelves

To permit storage of

food packages of var-

ious sizes, the door

shelves can be

placed at different

heights.

Gradually pull the

shelf in the direction

of the arrows until it

comes free, then re-

position as required.

www.zanussi.com

FreeStore

The refrigerator com-

partment is equipped

with a device that al-

lows for rapid cooling

of foods and more

uniform temperature

in the compartment.

This device activates

by itself when nee-

ded, for example for a

quick temperature re-

covering after door

opening or when the

ambient temperature

is high.

Allows you to switch on the device manually by

activating the Shopping function when needed.

Removal of freezing baskets from the

freezer

The freezing baskets have a limit stop to pre-

vent their accidental removal or falling out. At

the time of its removal from the freezer, pull the

basket towards yourself and, upon reaching the

end point, remove the basket by tilting its front

upwards.

At the time of putting it back, slightly lift the

front of the basket to insert it into the freezer.

Once you are over the end points, push the

baskets back in their position.

Helpful hints and tips

Normal Operating Sounds

• You may hear a faint gurgling and a bubbling

sound when the refrigerant is pumped

through the coils or tubing. This is correct.

• When the compressor is on, the refrigerant is

being pumped around and you will hear a

whirring sound and a pulsating noise from

the compressor. This is correct.

• The thermic dilatation might cause a sudden

cracking noise. It is natural, not dangerous

physical phenomenon. This is correct.

Hints for energy saving

• Do not open the door frequently or leave it

open longer than absolutely necessary.

• If the ambient temperature is high and the

Temperature Regulator is set to low temper-

ature and the appliance is fully loaded, the

compressor may run continuously, causing

frost or ice on the evaporator. If this happens,

set the Temperature Regulator toward warm-

er settings to allow automatic defrosting and

so a saving in electricity consumption.

Hints for fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating liq-

uids in the refrigerator

• do cover or wrap the food, particularly if it

has a strong flavour

• position food so that air can circulate freely

around it

Hints for refrigeration

Useful hints:

Meat (all types) : wrap in polythene bags and

place on the glass shelf above the vegetable

drawer.

For safety, store in this way only one or two

days at the most.

Cooked foods, cold dishes, etc..: these should

be covered and may be placed on any shelf.

www.zanussi.com

Fruit and vegetables: these should be thor-

oughly cleaned and placed in the special draw-

er(s) provided.

Butter and cheese: these should be placed in

special airtight containers or wrapped in alumi-

nium foil or polythene bags to exclude as much

air as possible.

Milk bottles: these should have a cap and

should be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not

packed, must not be kept in the refrigerator.

Hints for freezing

To help you make the most of the freezing

process, here are some important hints:

• the maximum quantity of food which can be

frozen in 24 hrs. is shown on the rating plate;

• the freezing process takes 24 hours. No fur-

ther food to be frozen should be added dur-

ing this period;

• only freeze top quality, fresh and thoroughly

cleaned, foodstuffs;

• prepare food in small portions to enable it to

be rapidly and completely frozen and to make

it possible subsequently to thaw only the

quantity required;

• wrap up the food in aluminium foil or poly-

thene and make sure that the packages are

airtight;

• do not allow fresh, unfrozen food to touch

food which is already frozen, thus avoiding a

rise in temperature of the latter;

• lean foods store better and longer than fatty

ones; salt reduces the storage life of food;

• water ices, if consumed immediately after re-

moval from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing in date on

each individual pack to enable you to keep

tab of the storage time.

Hints for storage of frozen food

To obtain the best performance from this appli-

ance, you should:

• make sure that the commercially frozen food-

stuffs were adequately stored by the retailer;

• be sure that frozen foodstuffs are transferred

from the foodstore to the freezer in the short-

est possible time;

• not open the door frequently or leave it open

longer than absolutely necessary;

• once defrosted, food deteriorates rapidly and

cannot be refrozen;

• do not exceed the storage period indicated

by the food manufacturer.

Care and cleaning

Caution! Unplug the appliance before

carrying out any maintenance operation.

This appliance contains hydrocarbons in

its cooling unit; maintenance and recharg-

ing must therefore only be carried out by au-

thorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with luke-

warm water and some neutral soap.

• regularly check the door seals and wipe

clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Important! Do not pull, move or damage any

pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly

perfumed cleaning products or wax polishes to

clean the interior as this will damage the

surface and leave a strong odour.

Clean the condenser (black grill) and the com-

pressor at the back of the appliance with a

brush. This operation will improve the perform-

ance of the appliance and save electricity con-

sumption.

Important! Take care of not to damage the

cooling system.

Many proprietary kitchen surface cleaners con-

tain chemicals that can attack/damage the

www.zanussi.com

plastics used in this appliance. For this reason

it is recommended that the outer casing of this

appliance is only cleaned with warm water with

a little washing-up liquid added.

After cleaning, reconnect the equipment to the

mains supply.

Defrosting of the refrigerator

Frost is automatically eliminated from the evap-

orator of the refrigerator compartment every

time the motor compressor stops, during nor-

mal use. The defrost water drains out through a

trough into a special container at the back of

the appliance, over the motor compressor,

where it evaporates.

It is important to periodically clean the defrost

water drain hole in the middle of the refrigerator

compartment channel to prevent the water

overflowing and dripping onto the food inside.

Use the special cleaner provided, which you

will find already inserted into the drain hole.

Defrosting of the freezer

The freezer compartment of this model, on the

other hand, is a "no frost" type. This means that

there is no buildup of frost when it is in opera-

tion, neither on the internal walls nor on the

foods.

The absence of frost is due to the continuous

circulation of cold air inside the compartment,

driven by an automatically controlled fan.

Troubleshooting

Caution! Before troubleshooting,

disconnect the power supply.

Only a qualified electrician or competent

person must do the troubleshooting that is not

in this manual.

Important! There are some sounds during

normal use (compressor, refrigerant

circulation).

Problem Possible cause Solution

The appliance is noisy. The appliance is not supported

properly.

Check if the appliance stands stable

(all the four feet should be on the

floor).

The compressor operates

continually.

The Temperature regulator may be

set incorrectly.

Set a warmer temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too fre-

quently.

Do not keep the door open longer

than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature before

storage.

The room temperature is too high. Decrease the room temperature.

The Action Freeze function is

switched on.

Refer to "Action Freeze function".

Water flows on the rear

plate of the refrigerator.

During the automatic defrosting

process, frost defrosts on the rear

plate.

This is correct.

www.zanussi.com

Problem Possible cause Solution

Water flows into the refrig-

erator.

The water outlet is clogged. Clean the water outlet.

Products prevent that water flows

into the water collector.

Make sure that products do not

touch the rear plate.

Water flows on the ground. The melting water outlet does not

flow in the evaporative tray above

the compressor.

Attach the melting water outlet to the

evaporative tray.

There is too much frost

and ice.

Products are not wrapped properly. Wrap the products better.

The door is not closed correctly. Refer to "Closing the door".

The Temperature regulator may be

set incorrectly.

Set a higher temperature.

The temperature in the ap-

pliance is too high.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature before

storage.

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the re-

frigeration is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air circu-

lation in the appliance.

The temperature in the

freezer is too high.

Products are too near to each oth-

er.

Store products so that there is cold

air circulation.

The appliance does not

operate.

The appliance is switched off. Switch on the appliance.

The mains plug is not connected to

the mains socket correctly.

Connect the mains plug to the mains

socket correctly.

The appliance has no power. There

is no voltage in the mains socket.

Connect a different electrical appli-

ance to the mains socket. Contact a

qualified electrician.

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the lamp".

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

1. Disconnect the appliance.

2. Push the movable part to unhook the lamp

cover (1).

3. Remove the lamp cover (2).

4. If needed replace the lamp with a light of

similar characteristic and power. It is sug-

gested to use Osram PARATHOM SPE-

CIAL T26 0.8 Watts.

5. Install the lamp cover.

6. Connect the appliance.

7. Open the door. Make sure that the lamp

comes on.

www.zanussi.com

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "In-

stallation".

3. If necessary, replace the defective door

gaskets. Contact the Service Center.

Dimension

Height 1850 mm

Width 595 mm

Depth 658 mm

Rising Time 18 h

Voltage 230-240 V

Frequency 50 Hz

The technical information are situated in the rat-

ing plate on the internal left side of the appli-

ance and in the energy label.

Installation

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

Install this appliance at a location where the

ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Location

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and

the wall unit must be at least 100 mm . Ideally,

however, the appliance should not be posi-

tioned below overhanging wall units. Accurate

levelling is ensured by one or more adjustable

feet at the base of the cabinet.

Warning! It must be possible to

disconnect the appliance from the mains

power supply; the plug must therefore be easily

accessible after installation.

www.zanussi.com

100 mm

min

20 mm

Rear spacers

You can find the two spacers in the bag with

documentation.

Do these steps to install the spacers:

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

Levelling

When placing the ap-

pliance ensure that it

stands level. This can

be achieved by two

adjustable feet at the

bottom in front.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the rating plate corre-

spond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact for

this purpose. If the domestic power supply

socket is not earthed, connect the appliance to

a separate earth in compliance with current

regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the E.E.C. Direc-

tives.

Door reversibility

Warning! Before carrying out any

operations, remove the plug from the

power socket.

Important! To carry out the following

operations, we suggest that this be made with

another person that will keep a firm hold on the

doors of the appliance during the operations.

www.zanussi.com

• Open the doors.

Unscrew the middle

hinge (B). Remove

the plastic spacer

(A).

• Remove the spacer

(F) and move to the

other side of the

hinge pivot (E).

• Remove the doors.

• Remove the left-

hand cover pin of

the middle hinge

(C,D) and move to

the other side.

• Fit the pin of the

middle hinge (C) in-

to the left-hand hole

of the lower door.

• Unscrew the lower

hinge (A)

• Remove the left-

hand cover pins (D)

and move to the

other side.

• Re-screw the lower

hinge (A) on the op-

posite side.

• Unscrew the lower

hinge pivot (B) and

the spacer (C) and

place them on the

opposite side.

• Remove the plugs

(1)on the upper

side of both doors

and move them to

the other side.

• Re-insert the lower

door on the lower

hinge pivot.

• Insert the middle

hinge into the left

drill of the lower

door.

• Unscrew the upper

hinge pivot and

place it on the op-

posite side.

• Fit the upper door

on the upper door

pivot.

• Re-insert the upper

door on the middle

hinge pivot slightly

tilting both doors.

• Re-screw the mid-

dle hinge . Do not

forget the plastic

spacer .

Do a final check to make sure that:

• All screws are tightened.

• The edges of the doors run parallel to the

side edge of the appliance.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Win-

ter), the gasket may not fit perfectly to the cabi-

net. In that case, wait for the natural fitting of

the gasket.

In case you do not want to carry out the above

mentioned operations, contact the nearest After

Sales Service Force. The After Sales Service

specialist will carry out the reversibility of the

doors at your cost.

Environmental concerns

The symbol on the product or on its

packaging indicates that this product may not

be treated as household waste. Instead it

should be taken to the appropriate collection

point for the recycling of electrical and

electronic equipment. By ensuring this product

is disposed of correctly, you will help prevent

potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. For more detailed

information about recycling of this product,

www.zanussi.com

please contact your local council, your

household waste disposal service or the shop

where you purchased the product.

www.zanussi.com

Sommaire

Consignes de sécurité _ _ _ _ _ _ _ _ _ _ _ 17

Description de l'appareil _ _ _ _ _ _ _ _ _ _ 20

Bandeau de commande _ _ _ _ _ _ _ _ _ _ 20

Première utilisation _ _ _ _ _ _ _ _ _ _ _ _ _ 24

Utilisation quotidienne _ _ _ _ _ _ _ _ _ _ _ 24

Conseils utiles _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 25

Entretien et nettoyage _ _ _ _ _ _ _ _ _ _ _ 27

En cas d'anomalie de fonctionnement _ _ _ 28

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 30

En matière de sauvegarde de l'environnement

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 32

Sous réserve de modifications.

Consignes de sécurité

Pour votre sécurité et garantir une utilisation

correcte de l'appareil, lisez attentivement cette

notice, y compris les conseils et avertisse-

ments, avant d'installer et d'utiliser l'appareil

pour la première fois. Pour éviter toute erreur

ou accident, veillez à ce que toute personne qui

utilise l'appareil connaisse bien son fonctionne-

ment et ses fonctions de sécurité. Conservez

cette notice avec l'appareil. Si l'appareil doit

être vendu ou cédé à une autre personne, veil-

lez à remettre cette notice au nouveau proprié-

taire, afin qu'il puisse se familiariser avec son

fonctionnement et sa sécurité.

Pour la sécurité des personnes et des biens,

conservez et respectez les consignes de sécu-

rité figurant dans cette notice. Le fabricant dé-

cline toute responsabilité en cas de dommages

dus au non-respect de ces instructions.

Sécurité des enfants et des personnes

vulnérables

• Cet appareil n'est pas destiné à être utilisé

par des enfants ou des personnes dont les

capacités physiques, sensorielles ou menta-

les, ou le manque d'expérience et de con-

naissance les empêchent d'utiliser l'appareil

sans risque lorsqu'ils sont sans surveillance

ou en l'absence d'instruction d'une personne

responsable qui puisse leur assurer une utili-

sation de l'appareil sans danger.

Empêchez les enfants de jouer avec l'appa-

reil.

• Ne laissez pas les différents emballages à

portée des enfants. Ils pourraient s'asphyxier.

• Si l'appareil doit être mis au rebut, veillez à

couper le câble d'alimentation électrique au

ras de l'appareil pour éviter les risques

d'électrocution. Démontez la porte pour évi-

ter que des enfants ne restent enfermés à

l'intérieur.

• Cet appareil est muni de fermetures magnéti-

ques. S'il remplace un appareil équipé d'une

fermeture à ressort, nous vous conseillons de

rendre celle-ci inutilisable avant de vous en

débarrasser. Ceci afin d'éviter aux enfants de

s'enfermer dans l'appareil et de mettre ainsi

leur vie en danger.

Consignes générales de sécurité

Avertissement

Veillez à ce que les orifices de ventilation, situ-

és dans l'enceinte de l'appareil ou la structure

intégrée, ne soient pas obstrués.

• Les appareils sont destinés uniquement à la

conservation des aliments et/ou des bois-

sons dans le cadre d’un usage domestique

normal, tel que celui décrit dans la présente

notice.

• N'utilisez pas d'appareils électriques,

d'agents chimiques ou tout autre système ar-

tificiel pour accélérer le processus de dégi-

vrage.

• Ne faites pas fonctionner d'appareils électri-

ques (comme des sorbetières électriques, ...)

à l'intérieur des appareils de réfrigération à

moins que cette utilisation n'ait reçu l'agré-

ment du fabricant.

• N'endommagez pas le circuit frigorifique.

• Le circuit frigorifique de l’appareil contient de

l’isobutane (R600a), un gaz naturel offrant un

haut niveau de compatibilité avec l’environ-

nement mais qui est néanmoins inflammable.

www.zanussi.com

Pendant le transport et l'installation de votre

appareil, assurez-vous qu'aucune partie du

circuit frigorifique n'est endommagée.

Si le circuit frigorifique est endommagé :

– évitez les flammes vives et toute autre

source d'allumage

– aérez soigneusement la pièce où se trouve

l'appareil

• Ne modifiez pas les spécifications de l'appa-

reil. Si le câble d'alimentation est endomma-

gé, il peut causer un court circuit, un incen-

die et/ou une électrocution.

Avertissement Les éventuelles répara-

tions ou interventions sur votre appareil,

ainsi que le remplacement du câble d'alimenta-

tion, ne doivent être effectuées que par un pro-

fessionnel qualifié.

1. Ne branchez pas le cordon d'alimenta-

tion à une rallonge.

2. Assurez-vous que la prise n'est pas

écrasée ou endommagée par l'arrière de

l'appareil. Une prise de courant écrasée

ou endommagée peut s'échauffer et

causer un incendie.

3. Vérifiez que la prise murale de l'appareil

est accessible.

4. Ne débranchez pas l'appareil en tirant

sur le câble.

5. Si la prise murale n'est pas bien fixée,

n'introduisez pas de prise dedans. Ris-

que d'électrocution ou d'incendie.

6. N'utilisez pas l'appareil sans le diffuseur

de l'ampoule (si présent) de l'éclairage

intérieur.

• Cet appareil est lourd. Faite attention lors de

son déplacement.

• Ne touchez pas avec les mains humides les

surfaces givrées et les produits congelés

(risque de brûlure et d'arrachement de la

peau).

• Évitez une exposition prolongée de l'appareil

aux rayons solaires.

• Les ampoules (si présentes) utilisées dans

cet appareil sont des ampoules spécifiques

uniquement destinées à être utilisées sur des

appareils ménagers. Elles ne sont pas du

tout adaptées à un éclairage quelconque

d'une habitation.

Utilisation quotidienne

• Ne posez pas d'éléments chauds sur les par-

ties en plastique de l'appareil.

• Ne stockez pas de gaz ou de liquides inflam-

mables dans l'appareil (risque d'explosion).

• Ne placez pas d'aliments directement contre

la sortie d'air sur la paroi arrière de l'appareil.

(Si l'appareil est sans givre.)

• Un produit décongelé ne doit jamais être re-

congelé.

• Conservez les aliments emballés conformé-

ment aux instructions de leur fabricant.

• Respectez scrupuleusement les conseils de

conservation donnés par le fabricant de l'ap-

pareil. Consultez les instructions respectives.

• Ne mettez pas de bouteilles ni de boîtes de

boissons gazeuses dans le compartiment

congélateur, car la pression se formant à l'in-

térieur du contenant pourrait le faire éclater

et endommager ainsi l'appareil.

• Ne consommez pas certains produits tels

que les bâtonnets glacés dès leur sortie de

l'appareil, car ils peuvent provoquer des brû-

lures.

Entretien et nettoyage

• Avant toute opération d'entretien, mettez l'ap-

pareil hors tension et débranchez-le de la

prise de courant.

• N'utilisez pas d'objets métalliques pour net-

toyer l'appareil.

• N'utilisez pas d'objet tranchant pour gratter la

couche de givre. Utilisez une spatule en plas-

tique.

• Contrôlez régulièrement l'orifice d'évacuation

de l'eau de dégivrage dans le compartiment

réfrigérateur. Nettoyez-le, si besoin. Si l'orifi-

ce est bouché, l'eau s'écoulera en bas de

l'appareil.

Installation

Important Avant de procéder au branchement

électrique, respectez scrupuleusement les

instructions fournies dans cette notice.

www.zanussi.com

• Déballez l'appareil et vérifiez qu'il n'est pas

endommagé. Ne branchez pas l'appareil s'il

est endommagé. Signalez immédiatement au

revendeur de l'appareil les dommages cons-

tatés. Dans ce cas, gardez l'emballage.

• Il est conseillé d'attendre au moins quatre

heures avant de brancher l'appareil pour que

le circuit frigorifique soit stabilisé.

• Veillez à ce que l'air circule librement autour

de l'appareil pour éviter qu'il ne surchauffe.

Pour assurer une ventilation suffisante, res-

pectez les instructions de la notice (chapitre

Installation).

• Placez l'appareil dos au mur pour éviter tout

contact avec le compresseur et le conden-

seur (risque de brûlure).

• Placez de préférence votre appareil loin

d'une source de chaleur (chauffage, cuisson

ou rayons solaires trop intenses).

• Assurez-vous que la prise murale reste ac-

cessible après l'installation de l'appareil.

• Branchez à l'alimentation en eau potable uni-

quement. (Si un branchement sur le réseau

d'eau est prévu.)

Maintenance

• Les branchements électriques nécessaires à

l'entretien de l'appareil doivent être réalisés

par un électricien qualifié ou une personne

compétente.

• Cet appareil ne doit être entretenu et réparé

que par un Service après-vente autorisé, ex-

clusivement avec des pièces d'origine.

Protection de l'environnement

Le système frigorifique et l'isolation de vo-

tre appareil ne contiennent pas de C.F.C.

contribuant ainsi à préserver l'environnement.

L'appareil ne doit pas être mis au rebut avec les

ordures ménagères et les déchets urbains. La

mousse d'isolation contient des gaz inflamma-

bles : l'appareil sera mis au rebut conformé-

ment aux règlements applicables disponibles

auprès des autorités locales. Veillez à ne pas

détériorer les circuits frigorifiques, notamment

au niveau du condenseur. Les matériaux utilisés

dans cet appareil identifiés par le symbole

sont recyclables.

www.zanussi.com

Description de l'appareil

2 43 5 9 10 11

1213141516

71 6 8

Bacs à fruits

Clayette en verre

Refroidissement DynamicAir

Bandeau de commande

Éclairage DEL

Compartiment à beurre

Balconnet de porte

Balconnet porte-bouteilles

Panier de congélation

Bac Maxibox

Panier de congélation

Module de refroidissement

Plaque signalétique

Bandeau de commande

BDE

www.zanussi.com

La page est en cours de chargement...

Zanussi ZRB935NX2 Manuel utilisateur

Marque: Zanussi

Modèle: ZRB935NX2

Catégorie: Réfrigérateurs-congélateurs

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Zanussi ZRB935NX2 User manual

Zanussi ZRB935NX2 Manuel utilisateur

Zanussi ZRB935NX2 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents