Telit Wireless Solutions CE910-DC Hardware User's Manual

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Notice

While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no

liability resulting from any inaccuracies or omissions in this document, or from use of the information

obtained herein. The information in this document has been carefully checked and is believed to be

entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves

the right to make changes to any products described herein and reserves the right to revise this

document and to make changes from time to time in content hereof with no obligation to notify any

person of revisions or changes. Telit does not assume any liability arising out of the application or use

of any product, software, or circuit described herein; neither does it convey license under its patent

rights or the rights of others.

It is possible that this publication may contain references to, or information about Telit products

(machines and programs), programming, or services that are not announced in your country. Such

references or information must not be construed to mean that Telit intends to announce such Telit

products, programming, or services in your country.

Copyrights

This instruction manual and the Telit products described in this instruction manual may be, include or

describe copyrighted Telit material, such as computer programs stored in semiconductor memories or

other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive

rights for copyrighted material, including the exclusive right to copy, reproduce in any form,

distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted

material of Telit and its licensors contained herein or in the Telit products described in this instruction

manual may not be copied, reproduced, distributed, merged or modified in any manner without the

express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed

to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights,

patents or patent applications of Telit, as arises by operation of law in the sale of a product.

Computer Software Copyrights

The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may

include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor

memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party

supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive

right to copy or reproduce in any form the copyrighted computer program. Accordingly, any

copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products

described in this instruction manual may not be copied (reverse engineered) or reproduced in any

manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the

purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or

otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party

supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation

of law in the sale of a product.

Usage and Disclosure Restrictions

License Agreements

The software described in this document is the property of Telit and its licensors. It is furnished by

express license agreement only and may be used only in accordance with the terms of such an

agreement.

Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by

law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language or computer language, in any form or by any means,

without prior written permission of Telit

High Risk Materials

Components, units, or third-party products used in the product described herein are NOT fault-tolerant

and are NOT designed, manufactured, or intended for use as on-line control equipment in the

following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities,

Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or

Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed

or implied warranty of fitness for such High Risk Activities.

Trademarks

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service

names are the property of their respective owners.

Contents

The aim of this document is the description of typical hardware solutions useful for developing a

product with the Telit CE910 module.

This document is intended for Telit customers who are about to implement their applications using

our CE910 modules.

For general contact, technical support, to report documentation errors and to order manuals, contact

Telit Technical Support Center (TTSC) at:

Alternatively, use:

For detailed information about where to buy the Telit modules or for recommendations on accessories

and components visit:

To register for product news and announcements or for product questions contact Telit Technical

Support Center (TTSC).

Our aim is to make this guide as helpful as possible. Please keep us informed of comments and

suggestions for improvements.

Telit appreciates feedback from the users of our information.

http://www.sensorexpert.com.cn 400-883-3391

½öÓÃÓÚÆÀ¹À¡£

°æÈ¨ËùÓÐ (c) by Foxit Software Company, 2004

ÓÉ Foxit PDF Editor ±à¼-

This document contains the following chapters:

Chapter 1: “Introduction” provides a scope for this document, target audience, contact and support

information, and text conventions.

Chapter 2: “General Product Description” gives an overview of the features of the product.

Chapter 3: “CE910 Module Connections” deals with the pin out configuration and layout.

Chapter 4: “Hardware Commands” How to operate the module via hardware.

Chapter 5: “Power supply” Power supply requirements and general design rules.

Chapter 6: “Antenna” The antenna connection and board layout design are the most important parts in

the full product design.

Chapter 7: “USB Port” The USB port on the Telit CE910 is the core of the interface between the

module and OEM hardware.

Chapter 8: “Serial ports” Refers to the serial ports of the Telit CE910.

Chapter 9: “Audio Section overview” Refers to the audio blocks of the Base Band Chip of the CE910

Telit Module.

Chapter 10: “General Purpose I/O” How the general purpose I/O pads can be configured.

Chapter 11: “ADC section” Deals with this one kind of converter.

Chapter 12: “Mounting CE910 on the Application” Mechanical dimensions and

recommendations on how to mount the module on the user’s board.

Chapter 13: “Packing System” Deals with packing system.

Chapter 14: “Application Design Guide” Deals with the design of host system for download or

upgrade.

Chapter 15: “Conformity Assessment Issues” provides some fundamental hints about the conformity

assessment that the final application might need.

Chapter 16: “Safety Recommendation” provides some safety recommendations that must be followed

by the customer in the design of the application that makes use of the Telit CE910.

Chapter 17: “Document History” provides document revision history of the Telit CE910.

Danger – This information MUST be followed or catastrophic equipment failure or bodily injury

may occur.

Caution or Warning – Alerts the user to important points about integrating the module. If these

points are not followed, the module and end user equipment may fail or malfunction.

Tip or Information – Provides advice and suggestions that may be useful when integrating the

module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.

 CE910 Software User Guide, 1vv0301011

 CE910 AT Commands Reference Guide, 80399ST10111A

 Telit EVK2 User Guide, 1vv0300704

The aim of this document is the description of typical hardware solutions useful for developing a

product with the Telit CE910 module.

In this document all the basic functions of a mobile device will be taken into account; for each one of

them a proper hardware solution will be suggested and eventually the wrong solutions and common

errors to be avoided will be evidenced. Obviously this document cannot embrace all hardware

solutions and products that may be designed. Avoiding the discussed wrong solutions must be

considered as mandatory. While the suggested hardware configurations must not be considered

mandatory, the information given must be used as a guide and a starting point for properly developing

a product with the Telit CE910 module.

NOTE:

The integration of the CDMA 1xRTT module within a user application must be done according to the

design rules described in this manual.

The information presented in this document is believed to be accurate and reliable. However, no

responsibility is assumed by Telit Communication S.p.A. for its use, such as any infringement of

patents or other rights of third parties. No license is granted by implication or otherwise under any

patent rights of Telit Communication S.p.A. other than for circuitry embodied in Telit products. This

document is subject to change without notice.

Signal

I/O

Function

Type

USB FS 2.0 Communication Port

B15

USB_D+

I/O

USB differential Data(+)

C15

USB_D-

I/O

USB differential Data(+)

A13

VUSB

I

Power for the internal USB transceiver

5V

Asynchronous UART – Prog. / data +HW Flow Control

N15

C103/TXD

I

Serial data input from DTE

CMOS 1.8V

M15

C104/RXD

O

Serial data output to DTE

CMOS 1.8V

M14

C108/DTR

I

Input for (DTR) from DTE

CMOS 1.8V

L14

C105/RTS

I

Input for (RTS) from DTE

CMOS 1.8V

P15

C106/CTS

O

Output for (CTS) to DTE

CMOS 1.8V

N14

C109/DCD

O

Output for (DCD) to DTE

CMOS 1.8V

P14

C107/DSR

O

Output for (DSR) to DTE

CMOS 1.8V

R14

C125/RING

O

Output for (RI) to DTE

CMOS 1.8V

Asynchronous Auxiliary UART

D15

TX_AUX

O

Auxiliary UART (TX Data to DTE)

CMOS 1.8V

E15

RX_AUX

I

Auxiliary UART (RX Data from DTE)

CMOS 1.8V

RUIM Interface

(*NOTE)

A3

RUIMVCC

-

Reserved but applicable only to RUIM variant :

Power supply for the RUIM

1.8/3V

A5

RUIMIO

I/O

Reserved but applicable only to RUIM variant :

RUIM Data I/O

1.8/3V

A6

RUIMCLK

O

Reserved but applicable only to RUIM variant :

RUIM Clock

1.8/3V

A7

RUIMRST

O

Reserved but applicable only to RUIM variant :

RUIM Reset

1.8/3V

Digital Voice interface (Reserved)

B9

DVI_WA0

-

Reserved

B6

DVI_RX

-

Reserved

B7

DVI_TX

-

Reserved

B8

DVI_CLK

-

Reserved

Analog Voice Interface

B2

EAR+

AO

Earphone signal output, phase +

B3

EAR-

AO

Earphone signal output, phase -

B4

MIC+

AI

Microphone input, phase +

B5

MIC-

AI

Microphone input, phase -

Digital IO

C8

GPIO_01

I/O

GPIO_01 / STAT LED

CMOS 1.8V

C9

GPIO_02

I/O

GPIO_02

CMOS 1.8V

C10

GPIO_03

I/O

GPIO_03

CMOS 1.8V

La page charge ...

Telit Wireless Solutions CE910-DC Hardware User's Manual

Ce manuel convient également à

Telit Wireless Solutions CE910-DC Hardware User's Manual

dans d''autres langues

Documents connexes

Autres documents