Dukers DSP48-18M-S2 Guide d'installation

BEFORE FIRST USE 0

It is important to perform a site survey before installing an appliance.

• Remove all packaging (àDisposal instructions).

• Check for completeness and transport damage. In case of damage or incomplete

delivery please contact your dealer (àGuarantee).

• Clean the appliance (àCleaning).

• Place the appliance on a horizontal and stable surface

• Try to position the appliance close to a wall, but leave enough space for ventilation to

ensure good circulation and efﬁciency of the appliance.

• Please keep the appliance away from substance, which can cause ignition

• Do not position the appliance in direct sunlight or near any heat sources.

• Protect the appliance from moisture, extreme heat or cold.

• Climate class for the appliance.

• Climate class and matched temperature range for reference:

Test room climate class

Dry bulb temperature

Relative humidity

°C

• Never use an extension cord – risk of overheating! If the power cord (6) does not

reach the nearest mains outlet, either rearrange your store layout or ask qualiﬁed

personnel to ﬁt a new outlet.

• The appliance is fitted with castors (8), so that you can easily move it from one place

to another. Warning! Do not move the appliance across uneven floors or steps.

• If power is cut off, wait for at least 5 minutes before plugging the appliance in again to

avoid damaging the compressor.

• Warning! Do not move the appliance across uneven ﬂoors or steps.

• Important! Allow the appliance to stand upright for 8 hours before connecting to a

mains outlet for the ﬁrst time, in order to allow the refrigerant to settle.