Whirlpool WED94HEAW Mode d'emploi

Marque: Whirlpool

Modèle: WED94HEAW

Catégorie: Sèche-linge électriques

Taper: Mode d'emploi

W10494212A

W10494222A - SP

If you have any problems or questions, visit us at www.whirlpool.com

Pour tout problème ou question, consulter www.whirlpoolappliances.ca

Use & Care Guide

Guide d’utilisation et d’entretien

ELECTRONIC DRYER

SÉCHEUSE ÉLECTRONIQUE

Para obtener acceso

al Manual de uso y

cuidado en español, o para

obtener información adicional

acerca de su producto, visite:

www.whirlpool.com.

W10494212A v15.indd 1 6/1/12 4:15 PM

DRYER SAFETY

TABLE OF CONTENTS

DRYER SAFETY .......................................................................2

ACCESSORIES ........................................................................4

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW ...........5

CONTROL PANEL AND FEATURES .........................................6

CYCLE GUIDE .......................................................................... 8

USING YOUR DRYER ............................................................10

CYCLE STATUS INDICATORS ................................................12

ADDITIONAL FEATURES .......................................................12

DRYER CARE .........................................................................13

TROUBLESHOOTING ............................................................15

WARRANTY ............................................................................ 18

ASSISTANCE OR SERVICE ..................................... Back Cover

TABLE DE MATIÈRES

SÉCURITÉ DE LA SÉCHEUSE ...............................................19

ACCESSOIRES ......................................................................21

VÉRIFICATION D’UNE CIRCULATION D’AIR ADÉQUATE

POUR LE SYSTÈME D’ÉVACUATION ....................................22

TABLEAU DE COMMANDE ET CARACTÉRISTIQUES ..........23

GUIDE DES PROGRAMMES ..................................................25

UTILISATION DE LA SÉCHEUSE ...........................................27

TÉMOINS LUMINEUX DE PROGRAMME ..............................29

CARACTÉRISTIQUES SUPPLÉMENTAIRES ..........................30

ENTRETIEN DE LA SÉCHEUSE .............................................31

DÉPANNAGE ..........................................................................33

GARANTIE .............................................................................. 39

ASSISTANCE OU SERVICE ...........................Couverture arrière

W10494212A v15.indd 2 6/1/12 4:15 PM

IMPORTANT: When discarding or storing your old clothes dryer, remove the door.

W10494212A v15.indd 3 6/1/12 4:15 PM

ACCESSORIES

Enhance your new washer and dryer with the following

genuine Whirlpool accessories. For more information

on options and ordering, call 1-800-901-2042, or visit us

at: www.whirlpool.com/accessories. In Canada, call

1-800-807-6777 or visit us at www.whirlpoolparts.ca

15" Pedestal

Color-matched pedestals raise

the washer and dryer to a more

comfortable working height.

The large drawer provides

convenient storage.

Stack Kit

If space is at a premium,

the stack kit allows the dryer

to be installed on top of

the washer.

Worksurface

The worksurface bridges

the washer and dryer, and

provides a convenient working

and storage area.

W10494212A v15.indd 4 6/1/12 4:15 PM

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Good air ow

Along with heat, dryers require good air ow to efciently

dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See Installation

Instructions.

The venting system attached to the dryer plays a big role

in good air ow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Maintain good air ow by:

Cleaning your lint screen before each load.

Replace plastic or foil vent material

with 4" (102 mm) diameter heavy, rigid

vent material.

Good

Better

Use the shortest length of vent possible.

Use no more than four 90° elbows in a vent system;

each bend and curve reduces air ow.

Remove lint and debris from the exhaust hood.

Remove lint from the entire length of the vent system

at least every 2 years. When cleaning is complete, be

sure to follow the Installation Instructions supplied with

your dryer for nal product check.

Clear away items from the front of the dryer.

Use Automatic Cycles for better fabric care and energy savings

Use the Automatic Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles,

drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer

shuts off when the load reaches the selected dryness. Use the NORMAL DRY dryness level to provide optimal energy savings.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to

over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

Tips for getting the best performance from your steam dryer

n

Results may vary depending on fabric. 100% cotton

garments with wrinkle-free nish may yield better results

than those without. 100% cotton items may require

additional touching up after cycles that use steam.

n

Use of fabric softener sheet is not recommended with

cycles that use steam. It may cause temporary staining

on clothes.

n

Cycles that use steam are not recommended for items that

have been starched. Wash any starched or new garments

prior to using a cycle that uses steam.

n

The Steam Refresh Cycle is best for smoothing out wrinkles

and reducing odors from loads consisting of dry items of

wrinkle-free cotton, cotton-polyester blend, common knits,

and synthetics.

W10494212A v15.indd 5 6/1/12 4:15 PM

CONTROL PANEL AND FEATURES

POWER

Touch to turn the dryer on and off. Touch to stop/cancel

a cycle at any time.

CYCLE CONTROL KNOB

Use your dryer’s cycle control knob to select available

cycles on your dryer. Turn the knob to select a cycle

for your laundry load. See “Cycle Guide” for detailed

descriptions of cycles.

Not all features and cycles are available on all models.

Models WED96HEA/WGD96HEA

Models WED88HEA/WGD88HEA

START/PAUSE

Touch and hold until the LED comes on to start a cycle, or

touch once while a cycle is in process to pause it.

NOTE: The control panel features a sensitive surface that responds

to a light touch of your nger. To ensure your selections are registered,

touch the control panel with your nger tip, not your ngernail. When

selecting a setting or option, simply touch its name.

B EA C D F

B ED F

W10494212A v15.indd 6 6/1/12 4:15 PM

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up

and the Estimated Time Remaining (for Automatic Cycles)

or actual time remaining (for Manual Cycles) will be

displayed.

Automatic Cycles are Heavy Duty, Normal, Bulky, Casual,

Delicates, Towels, and Sanitize. Manual Cycles are Quick

Dry and Timed Dry. The Steam Cycle is Steam Refresh.

Touch along the bottom of the display to adjust settings.

Touch “+” or “–” with Manual Cycles to increase or

decrease the length of a Timed Dry or Quick Dry cycle.

See “Cycle Guide” for available settings on each cycle.

Not all settings are available with all cycles.

Cycle Status Lights

The indicator bar at the top of the display will let you

know what stage of the drying cycle is in process.

For more information on each stage, see “Cycle Status

Indicators.”

Temp

When using Manual Cycles, you may select a dry

temperature based on the type of load you are drying.

Use the warmest setting safe for the garments in the

load. Follow garment label instructions.

NOTE: Automatic Cycles use a preset temperature that

is not adjustable.

Dryness Level

You may adjust the Dryness Level on Automatic Cycles

(except for the Sanitize cycle), if desired.

NOTE: Dryness Level is for use with Automatic Cycles

only.

Damp Dry Signal

Touch to select the Damp Dry Signal. When selected, a

series of beeps will sound when the load is damp, but

not completely dry. This will allow you to take clothes

out of the load that do not need to dry completely.

This option is available on Heavy Duty, Normal, Bulky,

Casual, Towels, and Delicates cycles. The Damp Dry

Signal is selected as a default for the Bulky cycle, as

a reminder to manually reposition bulky loads midway

through the cycle.

Wrinkle Shield

™

Option

If you will be unable to remove a load immediately,

touch Wrinkle Shield

™

to add up to 140 minutes of

periodic tumbling to help reduce wrinkling. You may

select the “With Steam” setting to add a short steam

cycle after 60 minutes to help smooth out wrinkles.

4 5

OPTIONS

Use to select available options for your dryer. Not all

cycles and options are available on all models.

Steam (on some models)

Touch to activate the Steam option, which adds steam

at the end of the cycle before cool down.

EcoBoost

™

Option

Touch to activate the EcoBoost

™

option, which

allows you to increase your energy savings by using

a slightly lower heat level. This may increase dry

times somewhat.

Static Reduce (on some models)

Touch to add the Static Reduce option to selected

Automatic cycles. The dryer will automatically tumble,

pause, and introduce a small amount of moisture

into the load to help reduce static. This option adds

approximately 8 minutes to the total cycle time.

Drum Light

Touch to turn the LED drum light on or off. The light

will also turn on when the door is open, and turn off

automatically after about 5 minutes.

Cycle Signal

Use this to turn the signal indicating the end

of a drying cycle on or off.

NOTE: You may also turn off the tones that sound

when a feature, setting, or option is touched. Touch

and hold Cycle Signal for about one second to turn

sounds on or off.

Control Lock

Use to lock the controls of the dryer and avoid

an accidental change in cycle options or preferences

during a drying cycle.

NOTE: The Control Lock function may be enabled

when recovering from a power failure. To unlock the

control, touch and hold CONTROL LOCK for at least

3 seconds.

W10494212A v15.indd 7 6/1/12 4:15 PM

CYCLE GUIDE — AUTOMATIC CYCLES

Heavyweight items Heavy High More 45 Damp Dry Signal Offers stepped drying starting

such as towels or Duty Normal Wrinkle Shield

™†

with High heat followed by Medium

heavy work clothes Less Static Reduce heat for enhanced fabric care

EcoBoost

™

and energy savings.

Steam

Work clothes, casual Normal Medium More 38 Damp Dry Signal Uses Medium heat to dry large

wear, mixed cottons, Normal Wrinkle Shield

™†

loads of mixed fabrics and items.

sheets, corduroys Less Static Reduce Normal is the preferred energy

EcoBoost

™

cycle.

Steam

Jackets, comforters, Bulky Medium More 55 Damp Dry Signal Use for drying large, bulky items;

pillows Normal Wrinkle Shield

™†

do not overll dryer drum. Partway

Less EcoBoost

™

through the cycle, the signal will

Steam sound to indicate when it is time

to rearrange items for optimal

drying.

Shirts, blouses, Casual Low More 35 Damp Dry Signal Uses a stepped drying temperature

permanent press, Normal Wrinkle Shield

™†

from Medium to Low for improved

synthetics, Less Static Reduce moisture removal and enhanced

lightweight items EcoBoost

™

fabric care.

Undergarments, Delicates Extra Low More 28 Damp Dry Signal Uses Extra Low heat to gently

blouses, lingerie, Normal Wrinkle Shield

™†

dry delicate items.

performance wear Less Static Reduce

EcoBoost

™

Large loads of cotton Towels High More 1:00 Damp Dry Signal This is a high heat cycle. Use for

towels, heavyweight Normal Wrinkle Shield

™†

large loads of heavyweight fabrics

items Less Static Reduce such as cotton towels.

EcoBoost

™

Steam

Large loads Sanitize High More 1:10 Wrinkle Shield

™†

This is a long cycle with high heat,

of heavyweight which has been proven to reduce

items household bacteria. This cycle is

not recommended for all fabrics.

Use for large loads of heavyweight

fabrics.

Items to dry: Cycle:

Drying

Temperature:

Dryness

Level:

Default

Time:

Available

Options:

Cycle Details:

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Load Size Recommendations

For best results, follow the wet load size recommendations noted

for each cycle.

Small load: Fill the dryer drum with 3–4 items,

not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full.

Do not overload. Items need to tumble freely.

Use Automatic Cycles for better fabric care and energy savings

The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.

Use the NORMAL dryness level to provide optimal energy savings.

†

You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying

Temperature settings.

W10494212A v15.indd 8 6/1/12 4:15 PM

CYCLE GUIDE — MANUAL CYCLES

Small loads and Quick Dry High 13 Wrinkle Shield

™†

For small loads of 3–4 items.

sportswear Medium

Low

Extra Low

Air Only

Any load Timed Dry High 40 Wrinkle Shield

™†

Use to dry items to a damp level for items that do

NOTE: Select Air Medium not require an entire drying cycle. Select a drying

Only to dry foam, Low temperature based on the type of fabrics in your

rubber, plastic, or Extra Low load. If you are unsure of the temperature to select

heat-sensitive Air Only for a load, select the lower setting rather than the

fabrics. higher setting.

Items to dry:

Cycle:

Drying

Temperature:

Default

Time:

Available

Options:

Cycle Details:

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

CYCLE GUIDE — STEAM CYCLE

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Load Size Recommendations

For best results, follow the load size recommendations noted

for each cycle.

Small load: Fill the dryer drum with 3–4 items,

not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full.

Do not overload. Items need to tumble freely.

†

You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying

Temperature settings.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear,

permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

Shirts, blouses, Steam Refresh High 22 Wrinkle Shield

™†

Use to reduce odors and light wrinkles.

and slacks Medium Static Reduce Do not add dryer sheets.

Items to

refresh:

Cycle:

Drying

Temperature:

Default

Time:

Available

Options:

Cycle Details:

†

You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying

Temperature settings.

W10494212A v15.indd 9 6/1/12 4:15 PM

3. Touch POWER

Touch POWER to turn on the dryer.

4. Select the desired cycle

Select the desired cycle for your load. See the “Cycle Guide”

for more information about each cycle. Not all cycles are

on all models.

USING YOUR DRYER

1. Clean the lint screen

Clean the lint screen before each load. Pull the lint screen

straight up. Roll lint off the screen with your ngers. Do not rinse

or wash screen to remove lint. Wet lint is hard to remove. Push

the lint screen rmly back into place.

For additional cleaning information, see “Dryer Care.”

2. Load the dryer

Open the door by pulling on the handle. Place laundry in the

dryer. Add a dryer sheet to wet load, if desired. Close the door.

IMPORTANT: Do not tightly pack the dryer. Items need

to tumble freely. Tightly packing can lead to poor drying

performance and may increase wrinkling and tangling.

WARNING: To reduce the risk of re, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

W10494212A v15.indd 10 6/1/12 4:15 PM

7. Touch and hold START/PAUSE

to begin cycle

Touch and hold START/PAUSE to begin the cycle.

8. Remove garments promptly

after cycle is nished

Promptly remove garments after cycle has completed

to reduce wrinkling.

5. Adjust cycle settings, if desired

You may adjust different settings, depending on whether you

have selected an Automatic Cycle, Manual Cycle, or Steam

Cycle. See the “Cycle Guide” for detailed information.

NOTE: Not all options and settings are available with all cycles.

Not all cycles are on all models.

Automatic Cycles:

You can select a different dryness level, depending on your

load. Touch DRYNESS LEVEL to scroll to More, Normal, or

Less. Selecting More, Normal, or Less automatically adjusts

the dryness level at which the dryer will shut off. Once a

dryness level is set, it cannot be changed without stopping

the cycle.

Automatic Cycles give the best drying in the shortest time.

Drying time varies based on fabric type, load size, and

dryness setting.

Manual Cycles:

When you select a Manual Cycle, the default

time appears in the display. Touch + and –

to increase or decrease the time in 1 minute

increments. Touch and hold to change the

time in 5 minute increments.

The default temperature may be changed

by pressing Temp until the desired dry

temperature is lit.

Steam Cycles:

Select Steam Refresh to reduce odors and light wrinkles in

dry loads consisting of wrinkle-free cotton, cotton-polyester

blends, common knits, and synthetics. If you will be unable

to remove a load immediately, touch Wrinkle Shield

™

to add

up to 140 minutes of periodic tumbling. You may select the

“With Steam” setting to add a short steam cycle after 60

minutes to help smooth out wrinkles.

6. Select any additional options

Add additional options such as Steam, Static Reduce, and/

or EcoBoost

™

(on some models) by touching that option. If

you will be unable to remove the load promptly, select Wrinkle

Shield

™

before pressing START/PAUSE.

NOTE: Not all options and settings are available with all cycles.

Changing the Automatic Cycle settings

to increase or decrease drying time

If all your loads on all Automatic Cycles are consistently less

dry or more dry than you would like, you may change the

default settings to increase or decrease the default dryness

level.

Your automatic drying settings can be adjusted to adapt to

different installations, environmental conditions, or personal

preference. This change is retained and will affect all of your

Automatic Cycles, not just the current cycle/load. There are

5 drying settings, which are displayed using the time display:

01 Factory preset dryness level.

02 Slightly drier clothes, 15% more drying time.

03 Much drier clothes, 30% more drying time.

04 Slightly wetter clothes, 15% less drying time.

05 Much wetter clothes, 30% less drying time.

To change the drying settings:

NOTE: The settings cannot be changed while the dryer

is running or paused. The dryer must be in standby mode

(power is off) to adjust the default settings.

1. Before starting a cycle, touch and hold DRYNESS

LEVEL for 6 seconds.

2. Touch DRYNESS LEVEL to select the dryness level

shown in the time display: 01, 02, 03, 04, or 05.

3. Touch START/PAUSE to save the new dryness level

setting.

W10494212A v15.indd 11 6/1/12 4:15 PM

ADDITIONAL FEATURES

2. Align the two hooks on the front of the drying rack with

the holes in the dryer door opening and press down fully

into holes. Rest the rear support on the dryer back ledge.

USING THE DRYING RACK

To obtain a drying rack for your dryer, order by calling

1-877-944-7566. You will need your model and serial

number and the purchase date. Remove and discard

any packing material before use.

Use the Drying Rack for items that you do not want to

tumble dry, such as sweaters and tennis shoes. When you

use the drying rack, the drum continues to turn, but the rack

remains stationary.

The drying rack is intended for use with the Manual Dry/

Timed Dry cycles only. The drying rack cannot be used

with Automatic cycles.

To use the drying rack:

IMPORTANT: Do not remove the lint screen.

1. Open dryer door.

3. Place wet items on top of the drying rack. Allow space

around items for air to circulate. The drying rack does

not move, but the drum will rotate; be sure to leave

adequate clearance between items and the inside of

the dryer drum. Make sure items do not hang over the

edges or between drying rack grille.

4. Close the door.

5. Select a Timed Dry/Air Only, or Low Temperature cycle.

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using the Air Only setting.

6. When the cycle is selected, the Estimated Time

Remaining display shows the default time. You can

change the actual time in the cycle by increasing or

decreasing the cycle time.

7. Start the dryer.

NOTE: Check the lint screen and remove any lint

accumulated from items dried on the drying rack

after the cycle is nished.

CYCLE STATUS INDICATORS

The Cycle Status Indicators show the progress of a cycle.

–/+ (Adjust drying time indicators)

The –/+ indicators will light when a Manual Cycle has been

selected.

Check Vent

The Check Vent indicator will light when the drying

cycle is complete as a reminder to clean the lint screen.

Eco Monitor

The Eco Monitor allows you to see how the settings you

select affect your energy savings. To use the Eco Monitor,

choose the best cycle, temperature, dryness level, and

options for the fabrics being dried. The Eco Monitor will rate

the energy use of those selections, from Good to Best. You

can then adjust the settings and options to decrease the

amount of energy used within that cycle.

Wet

The load is still wet and/or the cycle just started.

Damp

This indicator shows that the load is partially dried and items

that you may wish to hang up or iron while still damp may

be removed.

Cool Down

The dryer has nished drying with heat, and is now tumbling

the load without heat to cool it down and reduce wrinkling.

Done

This will indicate that the selected cycle has ended and the

load may be removed from the dryer. If Wrinkle Shield

™

has

been selected, the dryer may continue to tumble the load,

even if the Done indicator is lit.

Sensing

The Sensing indicator will light to indicate that the moisture

sensor on the dryer is operating.

Static Reduce (on some models)

This indicator will light when the Static Reduce function

is active.

NOTE: Static Reduce is not available on all models

or on all cycles.

Steam or Steaming (on some models)

This indicator will light when the Steam function is active.

NOTE: Steam is not available on all models or on all cycles.

Wrinkle Shield

™

Option

This indicator will light if the Wrinkle Shield

™

option has been

selected and is running. The dryer will periodically tumble

the load for up to 140 minutes after the cycle has ended.

Appearance may vary

W10494212A v15.indd 12 6/1/12 4:15 PM

DRYER CARE

CLEANING THE DRYER LOCATION

Keep dryer area clear and free from items that would

block the air ow for proper dryer operation. This includes

clearing piles of laundry in front of the dryer.

CLEANING THE DRYER INTERIOR

To clean dryer drum

1. Use a mild hand dish detergent mixed at a low

concentration with very warm water, and rub with

a soft cloth.

2. Rinse well with a wet sponge or towel.

3. Tumble a load of clean clothes or towels to dry drum

Use a microber cloth and hot water in a spray bottle

to clean the drum and a second microber towel to dry.

NOTE: Garments that contain unstable dyes, such as

denim blue jeans or brightly colored cotton items, may

discolor the rear of the dryer interior. These stains are

not harmful to your dryer and will not stain future loads

of clothes. Dry unstable dye items inside out to avoid

transfer of dye.

REMOVING ACCUMULATED LINT

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often,

depending on dryer usage. Cleaning should be done by a

qualied appliance servicer or ventilation system cleaner.

From the Exhaust Vent

Lint should be removed every 2 years, or more often,

depending on dryer usage.

CLEANING THE LINT SCREEN

Every load cleaning

The lint screen is located in the door opening of the dryer.

The control panel has an indicator light to remind you to

clean the lint screen after each load. A screen blocked

by lint can increase drying time.

To clean:

1. Pull the lint screen straight up. Roll lint off the screen

with your ngers. Do not rinse or wash screen to remove

lint. Wet lint is hard to remove.

2. Push the lint screen rmly back into place.

IMPORTANT:

n

Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can cause

overheating and damage to both the dryer and fabrics.

n

If lint falls off the screen into the dryer during removal,

check the exhaust hood and remove the lint. See

“Venting Requirements” in the Installation Instructions.

As needed cleaning

Laundry detergent and fabric softener residue can build

up on the lint screen. This buildup can cause longer drying

times for your clothes, or cause the dryer to stop before

your load is completely dry. The screen is probably clogged

if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months,

or more frequently, if it becomes clogged due to a residue

buildup.

To wash:

1. Roll lint off the screen with your ngers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent.

Scrub lint screen with the brush to remove residue

buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel.

Reinstall screen in dryer.

W10494212A v15.indd 13 6/1/12 4:15 PM

SPECIAL INSTRUCTIONS

FOR STEAM MODELS

Water Inlet Hose

Replace inlet hose and hose screen after 5 years of use

to reduce the risk of hose failure. Periodically inspect and

replace inlet hose if bulges, kinks, cuts, wear, or leaks

are found.

When replacing your inlet hose, record the date

of replacement.

To Winterize the Dryer

1. Unplug dryer or disconnect power.

2. Shut off water faucet.

3. Disconnect water inlet hose from faucet and drain.

To Use the Dryer Again

1. Flush water pipes. Reconnect water inlet hose to faucet.

Turn on water faucet.

2. Plug in dryer or reconnect power as described in the

Installation Instructions.

NON-USE, STORAGE, AND MOVING CARE

Install and store your dryer where it will not freeze. Because

some water may stay in the hose, freezing can damage

your dryer. If storing or moving your dryer during freezing

weather, winterize it.

Non-Use or Storage Care

Operate your dryer only when you are at home. If you will

be on vacation or not using your dryer for an extended

period of time, you should:

1. Unplug dryer or disconnect power.

2. Clean lint screen. See “Cleaning the Lint Screen.”

3. Turn off the water supply to the dryer. This helps to

avoid unintended ooding (due to a water pressure

surge) while you are away.

Moving Care

For power supply cord-connected dryers:

1. Unplug the power supply cord.

2. Gas models only: Close shut-off valve in gas supply line.

3. Gas models only: Disconnect gas supply line pipe and

remove ttings attached to dryer pipe.

4. Gas models only: Cap the open fuel supply line.

5. Steam models only: Shut off water faucet.

6. Disconnect the water inlet hose from faucet, then drain

the hose. Transport hose separately.

7. Make sure leveling legs are secure in dryer base.

8. Use tape to secure dryer door.

For direct-wired dryers:

1. Disconnect power.

2. Disconnect wiring.

3. Steam models only: Shut off water faucet.

4. Steam models only: Disconnect the water inlet hose from

faucet; then drain the hose. Transport hose separately.

5. Make sure leveling legs are secure in dryer base.

6. Use tape to secure dryer door.

Reinstalling the Dryer

Follow the Installation Instructions to locate, level, and

connect the dryer.

W10494212A v15.indd 14 6/1/12 4:15 PM

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help –

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

If you experience

Possible Causes

Solution

Door not closed completely.

Make sure the dryer door is closed completely.

Touch and hold START/PAUSE 2–5 seconds.

Household fuse is blown or circuit

breaker has tripped.

There may be 2 household fuses or circuit breakers for the

dryer. Check that both fuses are intact and tight, or that both

circuit breakers have not tripped. Replace the fuses or reset the

circuit breaker. If the problem continues, call an electrician.

TROUBLESHOOTING

Dryer will not run

Humming or whining

noise with Steam cycle

selected

Water pump on dryer is running.

Unusual Noise

START/PAUSE not touched rmly

or held long enough.

Dryer Operation

Incorrect power supply.

Electric dryers require 240-volt power supply.

Check with a qualied electrician.

Wrong type of fuse.

Use a time-delay fuse.

The water pump on the dryer is used during the Steam function.

If the dryer has just been installed or unused for an extended

period, the pump may be louder and run longer. This is normal.

Thumping noise

Dryer hasn’t been used in a while.

This is normal. The thumping sound should diminish after a few

minutes of use.

Rattling or vibrating

noise

A small object caught between the

edges of dryer drum.

Check the front and rear edges of the drum for small objects.

Clean out pockets before laundering.

Dryer isn’t properly leveled.

The dryer may vibrate if not properly installed. See the

Installation Instructions. All four dryer feet should be in rm

contact with the oor.

Clothing is balled up in dryer. When balled up, the load will bounce, causing the dryer to

vibrate. Separate the load items and restart the dryer.

Dryer Results

Dryer will not heat Household fuse is blown or circuit

breaker has tripped.

The drum may be turning, but you may not have heat. Electric

dryers use 2 household fuses or circuit breakers. Replace the

fuses or reset the circuit breaker. If the problem continues, call

an electrician.

Clothes are not drying

satisfactorily or drying

times are too long

Lint screen is clogged with lint.

Clean lint screen before each load.

The Air Only temperature setting

has been selected.

Select the correct temperature for the types of garments

being dried. See “Cycle Guide.”

Run the dryer for 5–10 minutes. Hold your hand under

the outside exhaust hood to check air movement. If you

do not feel air movement, clean exhaust system of lint

or replace exhaust vent with heavy metal or exible metal vent.

See the Installation Instructions.

The exhaust vent or outside

exhaust hood is clogged with lint,

restricting air movement.

Incorrect power supply.

Electric dryers require 240-volt power supply.

Check with a qualied electrician.

Supply line valve not open.

For gas dryers, make sure that the valve on the gas supply line

is open.

Clicking noise

Gas valve operating.

On gas dryers, you may hear the gas valve clicking as it opens

and closes. This is normal.

The exhaust vent is not the correct

length.

Check that the exhaust vent is not too long or has

too many turns. Long venting will increase drying times.

See the Installation Instructions.

The exhaust vent diameter is not

the correct size.

Use 4" (102 mm) diameter vent material.

The dryer is not level.

Clothes not contacting the moisture sensors during Automatic

cycles. See “Level Dryer” in the Installation Instructions.

W10494212A v15.indd 15 6/1/12 4:15 PM

Possible Causes

Solution

Dryer Results (cont.)

The dryer is located in a room with

temperature below 45ºF (7ºC).

Proper operation of dryer cycles requires temperatures above

45ºF (7ºC).

The dryer is located in a closet. Closet doors must have ventilation openings at the top

and bottom of the door. The front of the dryer requires

a minimum of 1" (25 mm) of airspace, and, for most

installations, the rear of the dryer requires 5" (127 mm).

See the Installation Instructions.

Cycle time is too short

Clothes are coming out of the

Steam Refresh cycle with damp

or wet spots.

Under certain environmental or installation conditions,

you may experience underdrying.

The automatic cycle is ending

early.

Change the dryness level setting on Automatic Cycles.

Increasing or decreasing the dryness level will change the

amount of drying time in a cycle. If loads are consistently

ending too early, see also “Changing the Automatic Cycle

settings to increase or decrease drying time.”

Lint on load

Lint screen is clogged with lint.

Stains on load

Improper use of fabric softener.

Add dryer fabric softener sheets at the beginning of the cycle.

Fabric softener sheets added to a partially dried load can

stain your garments. Do not use fabric softener sheets with

steam cycles.

Loads are wrinkled

The load was not removed from

dryer at the end of the cycle.

Select Steam Refresh Cycle to tumble the load with water

and heat. This cycle is best for smoothing out wrinkles and

reducing odors from dry loads consisting of wrinkle-free cotton,

cotton-polyester blends, common knits, and synthetics.

NOTE: Refer to garment care label instructions. Dry-clean-only

garments are not recommended.

The dryer was tightly packed. Dry smaller loads that can tumble freely. Results may also

vary depending on fabric type.

Clothes are not drying

satisfactorily or drying

times are too long (cont.)

For steam cycles, the water is not

properly connected with the dryer.

Make sure water is connected to the dryer. Check that water

inlet hose is connected to both the faucet and dryer’s water

inlet valve. Check that the water supply is turned on.

The load is too large and heavy

to dry quickly.

Fabric softener sheets are blocking

the grille.

The air outlet grille is just inside the door, behind the lint screen.

Check that it is not blocked by a fabric softener sheet.

Use only one fabric softener sheet, and use it only once.

Separate the load to tumble freely.

The load may not be contacting the

sensor strips on Automatic Cycles.

Level the dryer. See the Installation Instructions. All four dryer

feet should be in rm contact with the oor.

Clean lint screen before each load.

Stains on drum

Loose dyes in clothes.

Drum stains are caused by dyes in clothing (usually blue

jeans). These will not transfer to other clothing.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help –

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

If you experience

W10494212A v15.indd 16 6/1/12 4:15 PM

Possible Causes

Solution

The drying cycle has been

interrupted by a power failure.

Touch and hold START to restart the dryer. NOTE: The Control

Lock function may be enabled when recovering from a power

failure. To unlock the control, touch and hold CONTROL LOCK

for at least 3 seconds.

There may be a problem with your

home power supply, keeping the

dryer’s heater from turning on.

The dryer will continue to run when this diagnostic code is

present. Touch any pad to clear the code from the display and

return to the estimated time remaining.

Try the following:

Check to see if a household fuse has blown or circuit breaker

has tripped. Electric dryers use two household fuses or

breakers. Replace the fuse or reset the circuit breaker.

Conrm that the power cord is properly installed. Refer to

the Installation Instructions for details.

Select a Timed Dry heated cycle, and restart the dryer.

If the message persists, consult a qualied electrician.

“L2” Diagnostic Code

(low or no line voltage

condition)

The lint screen or vent is clogged;

the vent is crushed or kinked or

has too many turns.

The dryer will continue to run when this diagnostic code is

present. Touch any key to clear the code from the display and

return to the estimated time remaining.

Try the following:

• Clean lint screen.

• Check to see if the vent run from the dryer to the wall is

crushed or kinked.

• Conrm that the vent run from the dryer to the wall is free

of lint and debris.

Conrm that the exterior vent exhaust hood is free of lint

and debris.

Conrm that your vent system falls within the recommended

run length and number of elbows for the type of vent you are

using. Refer to “Plan Vent System” in the Installaton Instructions

for details.

Select a Timed Dry heated cycle, and restart the dryer.

If the message persists, have your entire home venting run

cleaned.

“AF” (low airow

condition)

“PF” (power failure)

The dryer is in need of service. If a code beginning with an “F” appears in the display,

alternating between F# and E#, the dryer control has

detected a problem that requires service. Call for service.

Dryer Displaying Code Message

Dryer Results (cont.)

Load removed before cooldown

portion of cycle complete.

Allow the dryer to complete the cooldown portion of the cycle

before removing the load.

Load too hot

Using Timed Dry cycle with a high

temperature setting.

Select an Automatic Cycle with a lower heat setting to avoid

overdrying the load.

Odors

Recent painting, staining, or

varnishing in the area where your

dryer is located.

Ventilate the area. When the odors or fumes are gone from

the area, rewash and dry the clothing.

For steam cycles, the water is not

properly connected with the dryer.

Make sure water is connected to the dryer. Check that water

inlet hose is connected to both the faucet and dryer’s water

inlet valve. Check that the water supply is turned on.

Odors are left in garments after

wearing.

To remove odors left in garments after wearing, select

Steam Refresh. This cycle is best for reducing wrinkles

and odors from dry loads consisting of wrinkle-free cotton,

cotton-polyester blends, common knits, and synthetics.

“F# E#” (F1 E1, F3 E1, etc.)

variable service codes.

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help –

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

If you experience

W10494212A v15.indd 17 6/1/12 4:15 PM

WHIRLPOOL CORPORATION LAUNDRY WARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is installed, operated, and maintained according to instructions

attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory

Specied Replacement Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance

was purchased.

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Whirlpool designated service company. This limited warranty is valid only in the United States or

Canada and applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective

from the date of original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is

used in a manner that is inconsistent to published user or operator instructions and/or installation instructions.

2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or

repair house fuses, or to correct house wiring or plumbing.

3. Service calls to repair or replace appliance light bulbs, air lters, or water lters. Consumable parts are excluded from warranty

coverage.

4. Damage resulting from accident, alteration, misuse, abuse, re, ood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.

5. Cosmetic damage, including scratches, dents, chips or other damage to the nish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.

6. Pick up and delivery. This major appliance is intended to be repaired in your home.

7. Repairs to parts or systems resulting from unauthorized modications made to the appliance.

8. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Whirlpool servicer is not available.

9. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance

with Whirlpool published installation instructions.

10. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or

cannot be easily determined.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS

FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and

provinces do not allow limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply

to you. This warranty gives you specic legal rights, and you also may have other rights that vary from state to state or province to

province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow

the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This

warranty gives you specic legal rights, and you also may have other rights that vary from state to state or province to province.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.

If you think you need repair service, rst see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve

the problem after checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by

calling Whirlpool. In the U.S.A., call 1 -800 -253-1301. In Canada, call 1-800 -807- 6777. 10/11

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need

it. You will need to know your complete model number and serial

number. You can nd this information on the model and serial

number label located on the product.

Dealer name _____________________________________________

Address __________________________________________________

Phone number ____________________________________________

Model number ____________________________________________

Serial number ____________________________________________

Purchase date ____________________________________________

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the

representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes

with this major appliance, you should ask Whirlpool or your retailer about buying an extended warranty.

W10494212A v15.indd 18 6/1/12 4:15 PM

SÉCURITÉ DE LA SÉCHEUSE

W10494212A v15.indd 19 6/1/12 4:15 PM

IMPORTANT : Pour mettre l’ancienne sécheuse au rebut ou pour la remiser, enlever la porte.

W10494212A v15.indd 20 6/1/12 4:15 PM

La page charge ...

Whirlpool WED94HEAW Mode d'emploi

Marque: Whirlpool

Modèle: WED94HEAW

Catégorie: Sèche-linge électriques

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WED94HEAW User guide

Whirlpool WED94HEAW Mode d'emploi

Whirlpool WED94HEAW Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents