Samsung JUR24FE Manuel utilisateur

Marque: Samsung

Modèle: JUR24FE

Catégorie: Frigos

Taper: Manuel utilisateur

JENN-AIR

REFRIGERATOR/

REFRIGERADOR/RÉFRIGÉRATEUR

Overlay Model/Modelo recubierto/Modèle à panneau décoratif

W10741579A/8336460126600

USE & CARE GUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.

MANUAL DE USO Y CUIDADO

Si tiene preguntas respecto a las características, funcionamiento, rendimiento, partes, accesorios o servicio técnico, llame al:

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet www.jennair.com.

En Canadá, llame al: 1-800-JENNAIR (1-800-536-6247), o visite nuestro sitio de internet www.jennair.ca.

GUIDE D’UTILISATION ET D’ENTRETIEN

Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247)

visitez notre site web à www.jennair.ca.

Table of Contents/Índice/Table des matières ......................................................................................2

222

TABLE OF CONTENTS

REFRIGERATOR SAFETY .............................................................3

INSTALLATION REQUIREMENTS ................................................4

Tools and Parts ............................................................................4

Location Requirements................................................................4

Product Dimensions.....................................................................4

Custom Overlay Panel .................................................................5

Custom Handle (optional) ............................................................5

Electrical Requirements ...............................................................6

INSTALLATION INSTRUCTIONS ..................................................6

Unpack the Refrigerator...............................................................6

Install Custom Overlay Panel and Handle ...................................7

Door Closing.................................................................................8

REFRIGERATOR USE....................................................................8

Normal Sounds ............................................................................8

Using the Controls .......................................................................9

REFRIGERATOR FEATURES ......................................................10

Refrigerator Shelves...................................................................10

DOOR FEATURES ........................................................................11

Door Bins....................................................................................11

Lighting the Refrigerator.............................................................11

REFRIGERATOR CARE ...............................................................11

Base Grille ..................................................................................11

Cleaning......................................................................................11

Vacation and Moving Care.........................................................12

TROUBLESHOOTING ..................................................................12

ASSISTANCE OR SERVICE.........................................................13

In the U.S.A. ...............................................................................13

In Canada ...................................................................................13

WARRANTY ..................................................................................14

ÍNDICE

SEGURIDAD DEL REFRIGERADOR...........................................15

REQUISITOS DE INSTALACIÓN.................................................16

Herramientas y piezas................................................................16

Requisitos de ubicación.............................................................16

Medidas del producto................................................................17

Marco recubierto a la medida....................................................17

Manija a la medida (opcional) ....................................................18

Requisitos eléctricos..................................................................18

INSTRUCCIONES DE INSTALACIÓN.........................................19

Desempaque del refrigerador ....................................................19

Cómo instalar el panel recubierto a la medida y la manija........19

Cierre de la puerta......................................................................20

USO DEL REFRIGERADOR.........................................................21

Sonidos normales ......................................................................21

Uso de los controles ..................................................................21

CARACTERÍSTICAS DEL REFRIGERADOR..............................23

Estantes del refrigerador............................................................23

CARACTERÍSTICAS DE LA PUERTA .........................................23

Recipientes de la puerta ............................................................23

Iluminación del refrigerador........................................................23

CUIDADO DEL REFRIGERADOR................................................24

Rejilla de la base.........................................................................24

Limpieza .....................................................................................24

Cuidado durante las vacaciones y mudanzas...........................24

SOLUCIÓN DE PROBLEMAS......................................................25

AYUDA O SERVICIO TÉCNICO...................................................26

En los EE.UU. .............................................................................26

En Canadá..................................................................................26

GARANTÍA.....................................................................................27

TABLE DES MATIÈRES

SÉCURITÉ DU RÉFRIGÉRATEUR ..............................................29

EXIGENCES D’INSTALLATION..................................................30

Outillage et pièces......................................................................30

Exigences d'emplacement.........................................................30

Dimensions du produit...............................................................31

Cadre décoratif personnalisé.....................................................31

Poignée personnalisée (facultative) ...........................................32

Spécifications électriques..........................................................33

INSTRUCTIONS D’INSTALLATION ...........................................33

Déballage du réfrigérateur ........................................................33

Installation du panneau décoratif personnalisé

et de la poignée..........................................................................33

Fermeture de la porte.................................................................35

UTILISATION DU RÉFRIGÉRATEUR..........................................35

Sons normaux ............................................................................35

Utilisation des commandes........................................................35

CARACTÉRISTIQUES DU RÉFRIGÉRATEUR ...........................37

Tablettes du réfrigérateur...........................................................37

CARACTÉRISTIQUES DE LA PORTE.........................................38

Balconnets de porte...................................................................38

Éclairage du réfrigérateur...........................................................38

ENTRETIEN DU RÉFRIGÉRATEUR ...........................................38

Grille de la base..........................................................................38

Nettoyage ...................................................................................38

Précautions à prendre pour les vacances et avant

déménagement .....................................................................39

DÉPANNAGE.................................................................................39

ASSISTANCE OU SERVICE.........................................................40

Aux États-Unis............................................................................41

Au Canada..................................................................................41

GARANTIE.....................................................................................42

333

REFRIGERATOR SAFETY

Proper Disposal of Your

Old Refrigerator

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned refrigerators are still dangerous

– even if they will sit for “just a few days.” If you are getting rid of

your old refrigerator, please follow these instructions to help

prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

■ Take off the door.

■ Leave the shelves in place so that children may not easily

climb inside.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

SAVE THESE INSTRUCTIONS

■

Plug into a grounded 3 prong outlet.

■

Do not remove ground prong.

■

Do not use an adapter.

■

Do not use an extension cord.

■

Disconnect power before servicing.

■

Replace all parts and panels before operating.

■

Remove doors from your old refrigerator.

■

Use nonflammable cleaner.

■

Keep flammable materials and vapors, such as gasoline,

away from refrigerator.

■

Use two or more people to move and install refrigerator.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or brain damage.

Important information to know about disposal of

refrigerants:

Dispose of refrigerator in accordance with Federal and Local

regulations. Refrigerants must be evacuated by a licensed,

EPA certified refrigerant technician in accordance with

established procedures.

444

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation

Tools Needed

■ Phillips screwdriver

Parts Needed

■ Custom Overlay Door Panel—See “Overlay Panel—Rear

View.”

■ Hardware (optional)

Parts Supplied

■ M4 x 14 wood screws (8)

Location Requirements

NOTES:

■ For the refrigerator to be flush with the front of the base

cabinets, remove any baseboards or moldings from the rear

of the opening. See “Product Dimensions” and later in this

section “Opening Dimensions.”

■ It is recommended that you do not install the refrigerator near

an oven, radiator, or other heat source.

■ Do not install in a location where the temperature will fall

below 55°F (13°C). For best performance, do not install the

refrigerator behind a cabinet door or block the base grille.

Opening Dimensions

■ Height dimensions are shown with the leveling legs extended

to the minimum height.

NOTE: When leveling legs are fully extended, add ⁵⁄₈" (15 mm)

to the height dimensions. See “Product Dimensions.”

■ If the floor of the opening is not level with the kitchen floor,

shim the opening to make it level with the kitchen floor.

Product Dimensions

■ Height dimensions are shown with the leveling legs NOT

extended.

■ The power cord is 60" (152.4 cm) long.

Front View

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

2¹⁄₂" (6,35 cm)

¹⁄₄" (6,35 mm)

Critical Dimensions:

A. 14

³⁄₄

" (37.5 cm) utility opening

B. 24" (60.96 cm) minimum opening width

¹⁄₂"

(1.3 cm)

14³⁄₄"

(37.5 cm)

24"

(60.96 cm)

min.

24" (60.96 cm) min.

34³⁄₈" (87.3 cm) min.

35" (88.9 cm) max.

30¹⁄₈"

(76.6 cm)

34¹⁄₈"

(86.8 cm)

34³⁄₈"

(87.4 cm)

555

Side View (door open 90°)

Top View

Custom Overlay Panel

If you plan to install a custom overlay panel, you will need to

create the panel yourself or consult a qualified cabinetmaker or

carpenter. See dimension drawings for panel specifications.

IMPORTANT:

■ The thickness of the overlay panel must be ³⁄₄" (19 mm).

■ Overlay panel must not weigh more than 20 lbs (9.07 kg).

■ Overlay panels weighing more than recommended may

cause damage to your appliance.

Overlay Panel—Rear View

Create the custom overlay panel using the dimensions shown.

IMPORTANT: The following graphic shows a custom panel for a

door with the hinges installed on the right-hand side. If your

refrigerator has the hinges installed on the left-hand side, rotate

the custom frame 180° so the hinge markings will be on the left.

Custom Handle (optional)

Custom handles are typically attached to the custom overlay

door panel only. There are two custom handle locations provided

on the refrigerator where the handle may be attached through the

custom overlay door panel and to the inside of the refrigerator

door for enhanced stability. The two locations provided

accommodate popular kitchen cabinet pull/handle sizes of 8"

(203 mm) and 6¹⁄₄" (160 mm).

1. Follow the instructions to make the custom overlay panel.

2. See the following dimension drawings for custom handle

specifications.

3. Drill custom handle holes to match the size of your custom

handle—8" (203 mm) or 6¹⁄₄" (160 mm).

*Dimension includes ³⁄₄" (19 mm) thick custom door panel

26¹⁄₈"

(66.4 cm)

47³⁄₄"

(121.4 cm)

23⁷⁄₈"

(60.6 cm)

21⁵⁄₈"

(55.0 cm)

23⁷⁄₈" *

(60.7 cm)

A. Drill holes using a

¹⁵⁄₃₂

" (12 mm) drill bit to a depth of approximately

¹⁄₂

" (13 mm) before routing. (4 holes total)

B. Drill holes using a

⁵⁄₁₆

" (8 mm) drill bit to a depth of approximately

¹⁄₂

" (13 mm) before routing. (4 holes total)

C. Drill holes using a

⁷⁄₆₄

" (2.8 mm) drill bit to a depth of approximately

¹⁄₂

" (13 mm) before routing. (8 holes total)

D. Rout shaded areas for hinges to a

¹⁹⁄₃₂

" (15 mm) depth.

E. Rout shaded areas for hinges to a

¹⁄₄

" (4 mm) depth.

F. Corner radius of

¹⁄₈

" (3 mm) using a

¹⁄₄

" drill bit when routing

radiuses total)

30³⁄₁₆"

(76.6 cm)

1¹⁄₁₆"

(2.7 cm)

⁷⁄₁₆"

(1.1 cm)

¹⁄₈"

(3 mm)

4" (10.2 cm)

1¹⁄₄" (3.25 cm)

1⁷⁄₈"

(4.75 cm)

2⁷⁄₆₄"

(5.35 cm)

3¹⁄₈"

(7.9 cm)

23³⁄₄" (60.3 cm)

1¹⁄₂" (3.8 cm)

5¹¹⁄₆₄"

(13.2 cm)

666

4. Install custom handle before installing overlay panel on

refrigerator door.

NOTE: Custom handles that are placed in a different location

(see preceding drawing) or are not the recommended size

(8" [203 mm] or 6¹⁄₄" [160 mm]) need to be installed on the door

panel with countersunk holes and installed before the custom

overlay door panel has been installed on the refrigerator door.

Electrical Requirements

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical

connection.

Recommended Grounding Method

A 115 volt, 60 Hz., AC only, 15– or 20–amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an

extension cord.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, unplug refrigerator or disconnect power.

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

Remove the Packaging

■ Remove tape and glue residue from surfaces before turning

on the refrigerator. Rub a small amount of liquid dish soap

over the adhesive with your fingers. Wipe with warm water

and dry.

■ Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your refrigerator. For

more information, see “Refrigerator Safety.”

■ Dispose of/recycle all packaging materials.

Clean Before Using

After you remove all of the package materials, clean the inside of

your refrigerator before using it. See the cleaning instructions in

“Refrigerator Care.”

A. 8" (203 mm) handle holes

B. 6" (160 mm) handle holes

C. Drill holes using a

³⁄₁₆

(4.5 mm) drill bit (2 holes)

(20.3 cm)

(16.0 cm)

(4.9 cm)

1¹⁄₂"

(3.7 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for

cleaning or service, be sure to cover the floor with

cardboard or hardboard to avoid floor damage. Always pull

the refrigerator straight out when moving it. Do not wiggle or

“walk” the refrigerator when trying to move it, as floor

damage could occur.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

777

Install Custom Overlay Panel and Handle

IMPORTANT:

■ Create custom overlay panel according to the specifications

in the “Custom Overlay Panel” section.

■ Jenn-Air is not responsible for the removal or addition of

molding or decorative panels that would not allow access to

the refrigerator for service.

Install Custom Panel

1. Open the door completely to 90°.

2. Remove the gasket from the corners of the door, pulling

gently until the two screws in each corner of the door can be

seen.

NOTE: The gasket does not have to be removed from the

door, only the corners.

3. Remove the four pairs of screws from the door.

4. Using two people, hold the custom overlay panel so that the

holes in the back of the panel align with the holes on the door.

NOTE: Custom handles that are placed in a different location

(see the “Custom Handle (optional)” section) or are not the

recommended size (8" [203

mm] or 6¹⁄₄" [160 mm]) need to be

installed on the door panel with countersunk holes, and installed

before the custom overlay door panel has been installed on the

refrigerator door.

5. Fasten the custom panel to the door using two wood screws

(provided in installation kit) at each corner.

NOTE: Do not use the same screws that were previously

removed.

6. Press the gasket firmly back into it’s original position.

A. Screws

B. Gasket

90°

A. M4 x 14 wood screws (provided in installation kit)

888

7. For 8" (203 mm) or 6¹⁄₄" (160 mm) custom handles, install the

custom handle from the inside/back of the refrigerator door

using screws provided with the handle.

Door Closing

Your refrigerator has four leveling legs. If your refrigerator seems

unsteady or you want the door to close more easily, adjust the

refrigerator’s tilt using the instructions below.

1. Plug into a grounded 3 prong outlet.

2. Move the refrigerator into its final location.

3. Turn the leveling legs to the right to lower the refrigerator or

turn the leveling legs to the left to raise it. It may take several

turns of the leveling legs to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the

refrigerator takes some weight off the leveling legs. This

makes it easier to adjust the leveling legs.

4. Open the door again to make sure that it closes as easily as

you like. If not, tilt the refrigerator slightly more to the rear by

turning both front leveling screws to the left. It may take

several more turns, and you should turn both leveling legs the

same amount.

REFRIGERATOR USE

Normal Sounds

Your new refrigerator may make sounds that your old one didn’t

make. Because the sounds are new to you, you might be

concerned about them. Most of the new sounds are normal. Hard

surfaces, such as the flooring and surrounding structures, can

make the sounds seem louder. The following describes the kinds

of sounds and what may be making them.

■ Your refrigerator is designed to run more efficiently to keep

your food items at the desired temperatures and to minimize

energy usage. The high efficiency compressor and fans may

cause your refrigerator to run longer than your old one. You

may also hear a pulsating or high-pitched sound from the

compressor or fans adjusting to optimize performance.

■ Rattling noises may come from the flow of refrigerant or items

stored inside the refrigerator.

■ As each cycle ends, you may hear a gurgling sound due to

the refrigerant flowing in your refrigerator.

■ You may hear water running into the drain pan when the

refrigerator is defrosting.

■ You may hear clicking sounds when the refrigerator starts or

stops running.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

999

Using the Controls

The control panel is located at the top of the compartment and

facing front. The control of the refrigerator has no mechanical

parts or buttons. When disconnected, the control panel displays

nothing and may be difficult to locate.

Turning Control On/Off

■ The first time that the refrigerator is plugged in, the control

will be in Cool Off mode. Cool On and Cool Off will be the

only options that display.

■ Press COOL ON for 3 seconds to turn on the refrigerator. All

menus and recommended temperature settings will be

displayed.

Viewing Celsius Temperatures

■ Press the F/C touch pad to toggle between displaying the

temperature in degrees Fahrenheit and degrees Celsius. The

corresponding indicator will illuminate.

Set to Recommended Temperatures

When the refrigerator is turned On for the first time, a

recommended temperature is set by default.

■ To adjust set point temperatures, press “+” (plus) or “-”

(minus) until the desired temperature setting is reached.

NOTE: The default recommended temperature for the refrigerator

is 37°F (2°C). The set point range for this model is 32°F to 42°F

(0°C to 5°C).

The control is set correctly when milk and beverages are as cold

as you like.

NOTE: Wait at least 24 hours between adjustments so the

refrigerator can acclimate.

Using Presets

For your convenience, your refrigerator also has controls that are

preset to recommended storage temperatures for specific

products.

Pressing any preset option will set the temperature value to

recommended temperature for each category:

■ Deli: 39°F (3°C)

■ Assorted: 37° (2°C)

■ Beverage: 34°F (1°C)

■ Meat: 32°F (0°C)

Max Cool

The Max Cool feature assists with periods of heavy usage, full

grocery loads or temporarily warm room temperatures.

Max Cool will reset the temperature for the refrigerator to the

coldest setting (32°F [0°C]) for a 24-hour period.

NOTE: The temperature display will remain at the coldest

setting(s) and the indicator light will remain On for a 24-hour

period unless any of the following happens:

■ Temperature is adjusted

■ Cool Off Mode is selected

■ Sabbath Mode is selected

After 24 hours, the temperature will automatically return to the

previous temperature set point and the indicator light will turn Off.

A. F/C touch pad

101010

Sabbath Mode

Sabbath Mode is designed for the traveler or for those whose

religious observances require turning off the lights. By selecting

this feature, the temperature set points remain unchanged, but

the control panel lights, interior lights, and control audio turn off.

For most efficient operation, it is recommended to exit the

Sabbath Mode when it is no longer required.

■ Press and hold SABBATH for 3 seconds to turn on the

feature. After the 3-second countdown, the feature will

activate and all other displays will turn Off.

■ Press and hold SABBATH for 3 seconds to turn off the feature

and turn on the display.

Door Open

If the door is open longer than 5 minutes, an alarm will sound

every 2 minutes until the door is closed or any control is pressed.

Lock Mode

The Lock mode deactivates all other options to avoid any

changes being made to your desired temperature settings.

■ To activate, press and hold LOCK for 3 seconds. After the

3-second countdown, all other displays will turn off and

become unavailable except Cool On, Cool Off, and Lock

Over Temperature Alarm

NOTE: If the Over Temperature Alarm activates, your food may

spoil. See “Power Interruptions.” Minimize door openings until

temperatures return to normal.

The Over Temperature feature is designed to let you know when

the refrigerator temperature rises above 45°F (7°C) longer than

hours. The audio alarm will shut off automatically when the

temperature returns to normal, but the indicator light will continue

to flash until an Alarm Reset has been performed to let you know

that an over temperature condition occurred.

If the over temperature condition is still present when an Over

Temp reset is performed, the indicator light will continue to

reactivate every 4 hours until refrigerator temperatures are below

45°F (7°C).

NOTE: These features will not appear on your control unless your

refrigerator is over temperature and the alarm requires a reset.

Showroom Mode

This mode is used only when the refrigerator is on display in a

retail store. If you unintentionally turn on Showroom Mode, Cool

Off will light up on the display, and the controls will appear to

work. Exit Showroom Mode by pressing and holding COOL ON

and SABBATH at the same time for 3 seconds.

REFRIGERATOR FEATURES

Refrigerator Shelves

To Remove or Adjust Upper Shelves:

1. Remove the shelf by lifting it up and out of the shelf brackets.

2. Remove the two shelf brackets and reposition them in the

desired location.

3. Replace the shelf by inserting it into the shelf brackets.

NOTE: Be sure the shelf is level.

To Remove and Replace Lower Shelf:

1. The very bottom glass shelf slides straight out.

2. Replace the shelf by aligning the edges with the guides and

pushing it in toward the back of the refrigerator.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

111111

DOOR FEATURES

Door Bins

Your refrigerator has two door bin locations for maximum storage

capacity.

To Remove and Replace the Door Bins:

1. Remove the door bin by tilting it forward and pulling it out.

2. Replace the bin by placing the rear of the bin under the

support on the door and sliding into place.

Lighting the Refrigerator

The refrigerator has an interior light that comes on any time the

door is opened.

NOTE: The light is an LED which does not need to be replaced. If

the LED does not illuminate when the door is opened, call Service

to replace the light. See Assistance or Service for contact

information.

REFRIGERATOR CARE

Base Grille

You must remove the base grille to access the condenser coils

for cleaning.

To Remove the Base Grille:

1. Open the refrigerator door.

2. Using a Phillips screwdriver, remove the two screws. Push

both tabs in toward the center to release the base grille from

the refrigerator.

3. Remove the base grille.

To Replace the Base Grille:

1. Open the refrigerator door.

2. Position the base grille so that both tabs align and the base

grille snaps into place. Replace the two screws. Tighten the

screws.

Cleaning

Clean the refrigerator about once a month to avoid buildup of

odors. Wipe up spills immediately.

To Clean Your Refrigerator:

1. Unplug refrigerator or disconnect power.

2. Remove all removable parts from inside, such as shelves, etc.

3. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

■ Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

■ To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda (2 tbs to 1 qt

[26 g to 0.95 L] of water).

4. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners, or cleaners containing

chlorine. These can scratch or damage materials. Dry

thoroughly with a soft cloth.

NOTE: To keep your stainless steel refrigerator looking like

new and to remove minor scuffs or marks, it is suggested that

you use the manufacturer’s approved Stainless Steel Cleaner

and Polish.

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces,

dispenser covers or door gaskets. If unintentional contact

does occur, clean plastic part with a sponge and mild

detergent in warm water. Dry thoroughly with a soft cloth.

5. Replace the removable parts.

6. Clean the condenser coils regularly. They are located behind

the base grille. Coils may need to be cleaned as often as

every other month. This may help save energy.

■ Remove the base grille. See “Base Grille.”

■ Use a vacuum cleaner with an extended attachment to

clean the condenser coils when they are dusty or dirty.

■ Replace the base grille.

7. Plug in refrigerator or reconnect power.

A. Tabs

B. Screws

BAA

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

121212

Vacation and Moving Care

Vacations

If you choose to leave the refrigerator on while you’re away, use

up any perishables and freeze other items.

If you choose to turn the refrigerator off before you leave, follow

these steps.

1. Remove all food from the refrigerator.

2. Unplug the refrigerator.

3. Clean the refrigerator. See “Cleaning.”

4. Tape a rubber or wood block to the top of the door to prop it

open far enough for air to get in. This stops odor and mold

from building up.

Moving

When you are moving your refrigerator to a new home, follow

these steps to prepare it for the move.

1. Remove all food from the refrigerator.

2. Unplug the refrigerator.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape them

together so they don’t shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the back of

the refrigerator.

When you get to your new home, put everything back and refer to

the “Installation Instructions” section for preparation instructions.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your refrigerator will not operate

■ Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■ Has a household fuse blown, or has a circuit breaker

tripped? Replace the fuse or reset the circuit.

■ Is the Refrigerator Control in Cool Off mode? See “Using

the Controls.”

The motor seems to run too much

■ Is the temperature outside hotter than normal? Expect the

motor to run longer under warm conditions. At normal

outdoor temperatures, expect your motor to run about 40%

to 80% of the time. Under warmer conditions, expect it to run

even more of the time.

■ Has a large amount of food just been added to the

refrigerator? Adding a large amount of food warms the

refrigerator. It is normal for the motor to run longer in order to

cool the refrigerator back down.

■ Is the door opened often? Expect the motor to run longer

when this occurs. In order to conserve energy, try to get

everything you need out of the refrigerator at once, keep food

organized so it is easy to find, and close the door as soon as

the food is removed.

■ Is the control set correctly for the surrounding

conditions? See “Using the Controls.”

■ Is the door closed completely? Push the door firmly shut. If

it will not shut all the way, see “The door will not close

completely” later in this section.

■ Are the condenser coils dirty? This obstructs air transfer

and makes the motor work harder. Clean the condenser coils.

See “Cleaning.”

Temperature is too warm

■ Is the door opened often? Be aware that the refrigerator will

warm when this occurs. In order to keep the refrigerator cool,

try to get everything you need out of the refrigerator at once,

keep food organized so it is easy to find, and close the door

as soon as the food is removed.

■ Has a large amount of food just been added to the

refrigerator? Adding a large amount of food warms the

refrigerator. It can take several hours for the refrigerator to

return to the normal temperature.

■ Is the control set correctly for the surrounding

conditions? See “Using the Controls.”

■ Is the base grille blocked? For best performance, do not

install the refrigerator behind a cabinet door or block the base

grille.

There is interior moisture buildup

■ Is the door opened often? To avoid humidity buildup, try to

get everything you need out of the refrigerator at once, keep

food organized so it is easy to find, and close the door as

soon as the food is removed. When the door is opened,

humidity from the room air enters the refrigerator. The more

often the door is opened, the faster humidity builds up,

especially when the room itself is very humid.

■ Is it humid? It is normal for moisture to build up inside the

refrigerator when the air is humid.

■ Is the food packaged correctly? Check that all food is

securely wrapped. Wipe off damp food containers before

placing in the refrigerator.

■ Is the control set correctly for the surrounding

conditions? See “Using the Controls.”

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

131313

The door is difficult to open

■ Is the gasket dirty or sticky? Clean the gasket and the

surface that it touches. Rub a thin coat of paraffin wax on the

gasket following cleaning.

The door will not close completely

■ Are food packages blocking the door open? Rearrange

containers so that they fit more tightly and take up less

space.

■ Are the shelves out of position? Put the shelves back into

their correct positions. See “Refrigerator Use” for more

information.

■ Is the gasket sticking? Clean the gasket and the surface

that it touches. Rub a thin coat of paraffin wax on the gasket

following cleaning.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If You Need Replacement Parts

If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified

replacement parts will fit right and work right because they are

made with the same precision used to build every new Jenn-Air

appliance.

To locate factory specified replacement parts in your area, call us

or your nearest designated service center.

In the U.S.A.

Call the Jenn-Air Customer eXperience Center toll free:

1-800-JENNAIR (1-800-536-6247).

Our Consultants Provide Assistance With:

■ Features and specifications on our full line of appliances.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

■ Referrals to local dealers, repair parts distributors, and

service companies. Jenn-Air designated service technicians

are trained to fulfill the product warranty and provide after-

warranty service, anywhere in the United States.

To locate the Jenn-Air designated service company in your area,

you can also look in your telephone directory Yellow Pages.

For Further Assistance

If you need further assistance, you can write to Jenn-Air with any

questions or concerns at:

Jenn-Air Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call the Jenn-Air Canada Customer eXperience Centre toll free:

1-800-JENNAIR (1-800-536-6247).

Our Consultants Provide Assistance With:

■ Features and specifications on our full line of appliances.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Referrals to local dealers, repair parts distributors, and

services companies. Jenn-Air Canada designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For Further Assistance

If you need further assistance, you can write to Jenn-Air Canada

with any questions or concerns at:

Jenn-Air Canada

Customer eXperience Centre

200 – 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

12/14

JENN-AIR

REFRIGERATION

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions

can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver

section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit

https://jennair.custhelp.com.

2. All warranty service is provided exclusively by our authorized Jenn-Air Service Providers. In the U.S. and

Canada, direct all requests for warranty service to:

Jenn-Air Customer eXperience Center

1-800-JENNAIR (1-800-536-6247)

If outside the 50 United States or Canada, contact your authorized Jenn-Air dealer to determine whether another warranty applies.

https://jennair.custhelp.com

FIVE YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

TWO YEAR LIMITED WARRANTY

For two years from the date of purchase, when this major appliance is

installed, operated and maintained according to instructions attached

to or furnished with the product, Jenn-Air brand of Whirlpool

Corporation or Whirlpool Canada LP (hereafter “Jenn-Air”) will pay for

Factory Specified Replacement Parts and repair labor to correct

defects in materials or workmanship that existed when this major

appliance was purchased, or at its sole discretion replace the

product. In the event of product replacement, your appliance will be

warranted for the remaining term of the original unit's warranty

period.

THIRD THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY

LINER AND SEALED REFRIGERATION SYSTEM

In the third through fifth years from the date of purchase, when this

major appliance is installed, operated and maintained according to

the instructions attached to or furnished with the product, Jenn-Air

brand will pay for factory specified replacement parts and repair

labor for the following components to correct non-cosmetic defects

in materials and workmanship in this part that prevent function of the

refrigerator and that existed when this major appliance was

purchased:

■ Refrigerator/freezer cavity liner if the part cracks due to defective

materials or workmanship.

■ Sealed Refrigeration system (includes compressor, evaporator,

condenser, dryer and connecting tubing).

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Jenn-Air designated service company.

This limited warranty is valid only in the United States or Canada and

applies only when the major appliance is used in the country in which

it was purchased. This limited warranty is effective from the date of

original consumer purchase. Proof of original purchase date is

required to obtain service under this limited warranty.

1. Commercial, non-residential or multiple-family use, or use inconsistent

with published user, operator or installation instructions.

2. In-home Instruction on how to use your product.

3. Service to correct improper product maintenance or installation,

installation not in accordance with electrical or plumbing codes or

correction of household electrical or plumbing (i.e. house wiring, fuses or

water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water filters,

preservation solutions, etc.).

5. Defects or damage caused by the use of non-genuine Jenn-Air parts or

accessories.

6. Damage from accident, misuse, abuse, fire, floods, acts of God or use

with products not approved by Jenn-Air.

7. Repairs to parts or systems to correct product damage or defects

caused by unauthorized service, alteration or modification of the

appliance.

8. Cosmetic damage including scratches, dents, chips, and other damage

to appliance finishes unless such damage results from defects in

materials and workmanship and is reported to Jenn-Air within 30 days.

9. Discoloration, rust or oxidation of surfaces resulting from caustic or

corrosive environments including but not limited to high salt

concentrations, high moisture or humidity or exposure to chemicals.

10. Food or medicine loss due to product failure.

11. Pick-up or delivery. This product is intended for in-home repair.

12. Travel or transportation expenses for service in remote locations where

an authorized Jenn-Air servicer is not available.

13. Removal or reinstallation of inaccessible appliances or built-in fixtures

(i.e. trim, decorative panels, flooring, cabinetry, islands, countertops,

drywall, etc.) that interfere with servicing, removal or replacement of the

product.

14. Service or parts for appliances with original model/serial numbers

removed, altered or not easily determined.

The cost of repair or replacement under these excluded circumstances

shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Jenn-Air makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations

contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you

should ask Jenn-Air or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. JENN-AIR

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of

incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and

you also may have other rights that vary from state to state or province to province.

151515

SEGURIDAD DEL REFRIGERADOR

Cómo deshacerse

adecuadamente de su

refrigerador

viejo

IMPORTANTE: El atrapamiento y asfixia de niños no es un

problema del pasado. Los refrigeradores tirados y abandonados

son un peligro, aún si van a quedar ahí “por unos pocos días”.

Si Ud. está por deshacerse de su refrigerador viejo, por favor

siga las instrucciones que se dan a continuación para prevenir

accidentes.

Antes de descartar su viejo refrigerador o congelador:

■ Saque la puerta.

■ Deje los estantes en su lugar así los niños no pueden meterse

adentro con facilidad.

Si no sigue las instrucciones de inmediato, usted puede

morir o sufrir una lesión grave.

Si no sigue las instrucciones, usted puede morir o sufrir

una lesión grave.

Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que

puede suceder si no se siguen las instrucciones.

Su seguridad y la seguridad de los demás es muy importante.

Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre

todos los mensajes de seguridad.

ADVERTENCIA

PELIGRO

Este es el símbolo de advertencia de seguridad.

Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a

usted y a los demás.

Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra

“PELIGRO” o “ADVERTENCIA”. Estas palabras significan:

Para reducir el riesgo de incendio, choque eléctrico, o lesiones personales al usar su refrigerador siga

estas precauciones básicas:

ADVERTENCIA:

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

CONSERVAR ESTAS INSTRUCCIONES

■

No quite la terminal de conexión a tierra.

■

No use un cable eléctrico de extensión.

■

Desconecte el suministro de energía antes de darle servicio.

■

Vuelva a colocar todos los componentes y paneles antes de

hacerlo funcionar.

■

Remueva las puertas de su refrigerador viejo.

■

Use un limpiador no inflamable.

■

No use un adaptador.

■

Mantenga los materiales y vapores inflamables, tales como

gasolina, alejados del refrigerador.

■

Use dos o más personas para mover e instalar el

refrigerador.

■

Conecte a un contacto de pared de conexión a tierra de

3 terminales.

Advertencias de la Proposición 65 del estado de California:

ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como

causantes de cáncer.

ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como

causantes de defectos congénitos o algún otro tipo de daños en la función reproductora.

ADVERTENCIA

Peligro de Asfixia

Remueva las puertas de su refrigerador viejo.

No seguir esta instrucción puede ocasionar la muerte

o daño al cerebro.

161616

REQUISITOS DE

INSTALACIÓN

Herramientas y piezas

Reúna las herramientas y piezas necesarias antes de comenzar

la instalación.

Herramientas necesarias:

■ Destornillador Phillips

Piezas necesarias:

■ Marco recubierto a la medida - Vea “Marco recubierto - Vista

posterior”.

■ Piezas de ferretería (opcionales)

Piezas suministradas:

Tornillos M4 x 14 (8)

Requisitos de ubicación

NOTAS:

■ Para que el refrigerador esté alineado con el frente de los

gabinetes de la base, quite los zócalos o molduras de la parte

posterior de la abertura. Vea “Medidas del producto” y más

adelante en esta sección, “Medidas de la abertura”.

■ No se recomienda instalar el refrigerador cerca de un horno,

radiador u otra fuente de calor.

■ No instale en un lugar donde la temperatura puede ser

inferior a 55 °F (13 °C). Para obtener un funcionamiento

óptimo, no instale el refrigerador detrás de la puerta de un

armario ni bloquee la rejilla de la base.

Medidas de la abertura

■ Las medidas de altura se muestran con las patas niveladoras

extendidas a la altura mínima.

NOTA: Cuando las patas niveladoras están totalmente

extendidas, agregue ⁵⁄₈" (15.9

mm) a las medidas de altura.

Vea “

Medidas del producto.”

■ Si el piso de la abertura no está nivelado con el piso de la

cocina, ponga calzas en la abertura para que quede nivelado

con el piso de la cocina.

Información importante para saber acerca del desecho

de refrigerantes:

Deshágase del refrigerador siguiendo los reglamentos

federales y locales. Los refrigerantes deberán ser evacuados

por un técnico certificado en refrigeración por EPA (Agencia

de protección del medioambiente) según los procedimientos

establecidos.

ADVERTENCIA

Peligro de Explosión

Mantenga los materiales y vapores inflamables,

tales como gasolina, alejados del refrigerador.

No seguir esta instrucción puede ocasionar la muerte,

explosión, o incendio.

Dimensiones fundamentales:

A. Abertura de uso general de 14¾" (37,5 cm)

B. Ancho mínimo de la abertura de 24" (60,96 cm)

2¹⁄₂" (6,35 cm)

¹⁄₄" (6,35 mm)

¹⁄₂"

(1,3 cm)

14³⁄₄"

(37,5 cm)

24"

(60,96 cm)

min.

24" (60,96 cm) min.

34³⁄₈" (87,3 cm) min.

35" (88,9 cm) max.

171717

Medidas del producto

■ Las medidas de altura se muestran SIN extender las patas

niveladoras.

■ El cable de suministro de energía es de 60" (152,4 cm) de

largo.

Vista frontal

Vista lateral (puerta abierta a 90°)

Vista superior

Marco recubierto a la medida

Si va a instalar un marco recubierto a la medida, deberá hacerlo

usted mismo o consultar con un carpintero o fabricante de

gabinetes calificado. Para obtener información acerca de las

especificaciones del marco, vea los gráficos dimensionales.

IMPORTANTE:

■ El grosor del marco recubierto debe ser de ³⁄₄" (1,91 cm).

■ El marco recubierto no debe pesar más de 20 lbs (9,07 kg).

■ Los marcos recubiertos que pesan más de lo recomendado

pueden dañar su electrodoméstico.

Marco recubierto - Vista posterior

Cree su marco recubierto a la medida utilizando las medidas que

se muestran.

IMPORTANTE: El siguiente gráfico muestra un marco a la

medida para una puerta con las bisagras instaladas del lado

derecho. Si su refrigerador tiene las bisagras instaladas del lado

izquierdo, rote el marco a la medida 180º para que las marcas de

las bisagras queden a la izquierda.

30¹⁄₈"

(76,6 cm)

34¹⁄₈"

(86,8 cm)

34³⁄₈"

(87,4 cm)

26¹⁄₈"

(66,4 cm)

47³⁄₄"

(121,4 cm)

*La medida incluye un marco recubierto a la

medida de ³⁄₄" (1,91 cm).

23⁷⁄₈"

(60,6 cm)

21⁵⁄₈"

(55,0 cm)

23⁷⁄₈" *

(60,7 cm)

181818

Manija a la medida (opcional)

Las manijas a la medida se fijan comúnmente al panel de la

puerta recubierta a la medida solamente. Hay dos ubicaciones

de la manija a la medida provistas en el refrigerador en las cuales

se puede fijar la manija en el panel de la puerta recubierta a la

medida y al interior de la puerta del refrigerador para una mejor

estabilidad. Las dos ubicaciones provistas permiten la

colocación de una manija/agarradera para armarios de cocina

común de 8" (203 mm) y 6¼" (160 mm) de tamaño.

1. Siga las instrucciones para obtener un panel recubierto a la

medida.

2. Vea los siguientes gráficos dimensionales para obtener

especificaciones de manijas a la medida.

3. Taladre los orificios de la manija a la medida para que

coincidan con el tamaño de la manija a la medida: 8" (203

mm) o 6 ¼" (160 mm).

4. Instale la manija a la medida antes de instalar el panel

recubierto en la puerta del refrigerador.

NOTA: Las manijas a la medida ubicadas en distintos lugares (ver

gráfico anterior) o cuyos tamaños no son los recomendados

(8" [203 mm] o 6 ¼" [160 mm]) deben instalarse en el panel de la

puerta con orificios avellanados y antes de que el panel de la

puerta recubierta a la medida se instale en la puerta del

refrigerador.

Requisitos eléctricos

Antes de mover el refrigerador a su ubicación final, es importante

asegurarse de que tiene la conexión eléctrica adecuada.

Método de conexión a tierra recomendado

Se requiere una fuente de energía eléctrica de 115 Voltios,

Hz., CA solamente y con fusibles de 15 ó 20 amperios,

debidamente conectada a tierra. Se recomienda que use un

circuito separado sólo para su refrigerador. Use un tomacorriente

que no se pueda apagar con un interruptor. No use un cable

eléctrico de extensión.

NOTA: Antes de realizar cualquier tipo de instalación, limpieza o

de quitar un foco de luz, desenchufe el refrigerador o desconecte

la fuente de energía.

A. Taladre los orificios con una broca de

¹⁵⁄₃₂

" (12 mm) hasta una

profundidad de aproximadamente

¹⁄₂

" (13 mm) antes de

contornearlos (4 orificios en total).

B. Taladre los orificios con una broca de

⁵⁄₁₆

" (8 mm) hasta una

profundidad de aproximadamente

¹⁄₂

" (13 mm) antes de

contornearlos (4 orificios en total).

C. Taladre los orificios con una broca de

⁷⁄₆₄

" (2,8 mm) hasta una

profundidad de aproximadamente

¹⁄₂

" (13 mm) antes de

contornearlos (8 orificios en total).

D. Contornee las áreas sombreadas para las bisagras hasta una

profundidad de

¹⁹⁄₃₂

" (15 mm).

E. Contornee las áreas sombreadas para las bisagras hasta una

profundidad de

¹⁄₄

" (4 mm).

F. Contornee un ángulo con un radio de

¹⁄₈

" (3 mm) con una

broca de

¹⁄₄

" (5 radios en total).

4" (10,2 cm)

A. Orificios de 8" (203 mm) de la manija

B. Orificios de 6" (160 mm) de la manija

C. Taladre orificios con una broca de

³⁄₁₆

" (4,5 mm) (2 orificios)

(20,3 cm)

(16,0 cm)

(4,9 cm)

1¹⁄₂"

(3,7 cm)

ADVERTENCIA

Peligro de Choque Eléctrico

Conecte a un contacto de pared de conexión a tierra de

3 terminales.

No quite la terminal de conexión a tierra.

No use un adaptador.

No use un cable eléctrico de extensión.

No seguir estas instrucciones puede ocasionar

la muerte, incendio o choque eléctrico.

191919

INSTRUCCIONES DE INSTALACIÓN

Desempaque del refrigerador

Cómo quitar los materiales de empaque

■ Quite los residuos de cinta y goma de las superficies antes

de encender el refrigerador. Frote un poco de detergente

líquido para vajillas sobre el adhesivo con los dedos. Limpie

con agua tibia y seque.

■ No use instrumentos filosos, alcohol para fricciones, líquidos

inflamables o productos de limpieza abrasivos para eliminar

los restos de cinta o goma. Estos productos pueden dañar la

superficie de su refrigerador. Para más información, vea

“Seguridad del refrigerador”.

■ Deshágase de todos los materiales de embalaje o recíclelos.

Limpieza antes del uso

Una vez que usted haya quitado todos los materiales de

empaque, limpie el interior de su refrigerador antes de usarlo.

Vea las instrucciones de limpieza en “Cuidado de su

refrigerador”.

Cómo instalar el panel recubierto

a la medida y la manija

IMPORTANTE:

■ Cree un panel recubierto a la medida de acuerdo con las

especificaciones en la sección “Panel recubierto a la

medida”.

■ Jenn-Air no es responsable de la remoción o adición de

molduras o paneles decorativos que pudieran impedir el

acceso al electrodoméstico para darle servicio.

Cómo instalar el panel a la medida

1. Abra la puerta por completo a 90°.

2. Quite la junta de las esquinas de la puerta, jalando

suavemente hasta que se puedan ver los dos tornillos en

cada esquina de la puerta.

NOTA: La junta no debe quitarse de la puerta, solo de las

esquinas.

ADVERTENCIA

Peligro de Peso Excesivo

Use dos o más personas para mover e instalar

el refrigerador.

No seguir esta instrucción puede ocasionar una

lesión en la espalda u otro tipo de lesiones.

Cómo mover su refrigerador:

Su refrigerador es pesado. Cuando mueva el refrigerador

para limpiarlo o para darle servicio, cerciórese de cubrir

el piso con cartón o madera para evitar daños en el mismo.

Al mover el refrigerador, siempre tire directamente hacia

afuera. No menee el refrigerador de lado a lado ni lo haga

“caminar” cuando lo trate de mover ya que podría dañar

el piso.

Información importante para saber acerca de los estantes

y tapas de vidrio:

No limpie los estantes y tapas de vidrio con agua caliente

mientras están fríos. Los estantes y tapas pueden romperse

si se exponen a cambios bruscos de temperatura o impacto,

como sería un golpe brusco. El vidrio templado se ha

diseñado para hacerse añicos. Esto es normal. Los estantes

y tapas de vidrio son muy pesados. Use ambas manos al

sacarlos para evitar que se caigan.

A. Tornillos

B. Junta

90°

202020

3. Quite los cuatro pares de tornillos de la puerta.

4. Con la ayuda de dos personas, sostenga el panel recubierto

a la medida de modo que los orificios de la parte posterior del

panel queden alineados con los orificios de la puerta.

NOTA: Las manijas a la medida ubicadas en distintos lugares

(ver la sección “Manija a la medida [opcional]”) o cuyos tamaños

no son los recomendados (8" [203 mm] o 6¼" [160 mm]) deben

instalarse en el panel de la puerta con orificios avellanados y

antes de que el panel del puerta recubierto a la medida se instale

en la puerta del refrigerador.

5. Luego, sujete el panel a la medida a la puerta colocando dos

tornillos para madera (provistos en el juego de instalación) en

cada esquina.

NOTA: No use los mismos tornillos que se quitaron

anteriormente.

6. Presione la junta con firmeza hacia atrás para colocarla en su

posición original.

7. Para manijas a la medida de 8" (203 mm) o 6¼" (160 mm),

instale la manija a la medida desde el interior/parte posterior

de la puerta del refrigerador usando los tornillos provistos

con la manija.

Cierre de la puerta

Su refrigerador tiene cuatro patas niveladoras. Si el refrigerador

parece inestable o usted quiere que las puertas se cierren con

mayor facilidad, ajuste la inclinación del refrigerador siguiendo

las instrucciones a continuación.

1. Conecte a un contacto de pared de conexión a tierra de

terminales.

A. Tornillos para madera de M4 x 14

(provistos en el juego de instalación)

ADVERTENCIA

Peligro de Choque Eléctrico

Conecte a un contacto de pared de conexión a tierra de

3 terminales.

No quite la terminal de conexión a tierra.

No use un adaptador.

No use un cable eléctrico de extensión.

No seguir estas instrucciones puede ocasionar

la muerte, incendio o choque eléctrico.

La page charge ...

Samsung JUR24FE Manuel utilisateur

Marque: Samsung

Modèle: JUR24FE

Catégorie: Frigos

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung JUR24FE User manual
español: Samsung JUR24FE Manual de usuario

Samsung JUR24FE Manuel utilisateur

Samsung JUR24FE Manuel utilisateur

dans d''autres langues

Autres documents