veoneer 77V125CRN Manuel utilisateur

Taper
Manuel utilisateur
User Manual for Product Model: 77V125CRN
PUBLIC
77 GHz CRN Radar Sensor
User Manual
Product Model: 77V125CRN
Veoneer US, Inc.
26360 American Drive
Southfield, Michigan 48034 USA
Phone: +1 248 223 0600
Fax: +1 248 223 8833
User Manual for Product Model: 77V125CRN Page 2 of 7
PUBLIC
Table of Contents
ABBREVIATIONS 3
1.1 LIST OF TERMINOLOGY AND ACRONYMS 3
2 PRODUCT OVERVIEW 3
2.1 PRODUCT DESCRIPTION 3
2.2 PRODUCT APPLICATION EXAMPLES 3
3 TYPICAL INSTALLATION 4
4 HARDWARE DESCRIPTION 4
5 SENSOR VARIANTS 5
5.1 GENERIC SPECIFICATIONS 5
6 SENSOR FEATURES 5
7 CONFORMANCE STATEMENTS 6
7.1 USA 6
7.2 CANADA 6
7.3 RADIO FREQUENCY EXPOSURE INFORMATION 6
7.4 EUROPE 6
8 REVISION HISTORY 7
List of Figures
FIGURE 1: TYPICAL INSTALLATION POSITIONS ........................................................................................................................................... 4
FIGURE 2: GENERIC SENSOR ................................................................................................................................................................. 4
List of Tables
TABLE 1: SENSOR SPECIFICATIONS .......................................................................................................................................................... 5
TABLE 2: REVISION HISTORY ................................................................................................................................................................. 7
User Manual for Product Model: 77V125CRN Page 3 of 7
PUBLIC
Abbreviations
1.1 List of Terminology and Acronyms
BSM Blind Spot Monitoring
BSW Blind Spot Warning
PCB Printed Circuit Board
CAN Controller Area Network
CAN FD Controller Area Network Flexible Data-rate
ECU Electronic Control Unit (CAN bus Master located in the automobile)
GHz Giga-Hertz (10^9)
HP Host Processor
LCA Lane Change Assist
PCB Printed Circuit Board
PWM Pulse Width Modulation
RADAR RAdio Detection And Ranging
RCTA Rear Cross Traffic Alert
RF Radio Frequency (or Microwave)
LED Light Emitting Diode
CTA/B Collision Traffic Alert/Break
EIRP Equivalent Isotropically Radiated Power
ADAS Advanced Driver Assistance Systems
2 Product Overview
2.1 Product Description
The products described here are part of a family of radars offered by Veoneer. They are intended for
automotive use, operating in the 76-77 GHz band.
The radars are fully integrated devices, with the RF part and DSP part on two different PCBs. The DSP
board controls the signal processing, as well as vehicle communications through CAN and diagnosis
functions. The RF PCB generates the FMCW waveform and transmit/receive the radio signal through
patch antennae.
The radars are integrated into a vehicle to enhance vehicle safety systems. They can be integrated as a
standalone sensor or sensors, or as part of more complex system that also may include cameras, lidar,
and other type of sensors to provide features like Automatic Cruise Control, Automatic Emergency Break,
Free space detections and other Autonomous Driving functions.
2.2 Product Application Examples
The product can be used, but is not limited to the following applications:
Autonomous drive systems
Automatic braking systems
Lane change warning
Adaptive cruise control
Collision prevention systems
Automatic lane change systems
Pedestrian and Bicycle collision prevention
Etc.
User Manual for Product Model: 77V125CRN Page 4 of 7
PUBLIC
3 Typical Installation
The radar is typically installed in the positions of the vehicle depicted in Figure 1 often mounted behind a
bumper or emblem.
4 Hardware Description
The radar assembly consists of 2 PCB boards, one containing all the RF components, antenas and analog
to digital converters and the other containing all what is necessary for signal processing and
communications with the vehicle and power.
The boards are assembled in to a plastic housing that is laser welded toghether. The sensor has no
servisable parts and can’t be opened without permanent damage.
Figure 2: Generic Sensor
Figure 1: Typical Installation Positions
User Manual for Product Model: 77V125CRN Page 5 of 7
PUBLIC
5 Sensor Variants
5.1 Generic Specifications
Table 1: Sensor specifications
6 Sensor Features
The product can be used to support following applications among others:
Blind Spot Monitoring (BSM) - The BSM algorithm detects and reports “Objects of Interest" on
either side of the vehicle, within a specified blind spot” zone. The feature generates an output a
signal on the CAN Bus.
Lane Change Warning/Assist (LCW/A) - The LCW/A algorithm detects and reports to the driver
that a highway licensable vehicle is rapidly approaching the host vehicle in one of the adjacent
lanes. The feature generates a signal which is used to drive a visual display placed in the outside
view mirror and/or request a chime or vibrating seat cushion, to alert the driver to the approach of
objects of interest within the defined LCA zone. The signal can also be used by the ADAS system
to engage/dis-engage lane change, as per described in UN R79.
Rear Cross Traffic Alert/Break (RCTA/B) - The RCTA/B algorithm detects and reports “Objects of
Interest” behind the host vehicle, within a specified RCTA/B coverage zone when going backward. The
feature generates a signal which is used to drive a visual display to alert the driver of the presence of
objects of interest that may cause a collision with the host vehicle within the
defined RCTA zone. The signal can also be used to control the break.
Sensor Specifications & Functions
Value
Unit
Operating Conditions
Frequency Band
76-77
Power Dissipation
5.5
Vehicle Interface
CAN/CAN-FD
Operating Temperature
-40 to 85
Input Operating Voltage
8 16
Operating years
15
Waveform Parameters
Cycle Time
50
Bandwidth
925
Center Frequency 76.5 GHz
76.5
Physical Parameters
Size
72x63x19
Weight
<150
Vehicle Physical Interface
2x4 Nano MQS
User Manual for Product Model: 77V125CRN Page 6 of 7
PUBLIC
7 Conformance Statements
7.1 USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. CAUTION TO USERS Changes or
modifications not expressly approved by the party responsible for compliance could void the user`s
authority to operate the equipment.
Additionally, it should be mentioned, that the integrator is advised to have this statement in their user
manual as well.
7.2 Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two
conditions: (1) This device may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
L’metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR
d’Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorise aux deux conditions suivantes : 1) L’appareil ne doit pas produire
de brouillage; 2) L’appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est
susceptible d’en compromettre le fonctionnement.
7.3 Radio Frequency Exposure Information
This equipment should be operated at a minimum distance of 20 cm from the user.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm between
the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas etre
place au meme endroit ou utilise simultanement avec un autre transmetteur ou antenne.
7.4 Europe
Hereby, Veoneer US, Inc declares that the radio equipment type 77V125CRN is in compliance with
Directive 2014/53/EU.
Operational frequency band: 76 77GHz
Maximum radio-frequency output power: < 55 dBm peak eirp
The full text of the EU declaration of conformity is available at the following internet address:
https://www.veoneer.com/en/regulatory
User Manual for Product Model: 77V125CRN Page 7 of 7
PUBLIC
8 Revision History
The revision number in table below is the PLM revision and version number. The Description/Comment
is the same description that is found in PLM in check comment.
Revision
Date
Author(s)
Description/comment
000 v1
2021-12-23
Harsha Deshpande
Draft
Table 2: Revision history
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

veoneer 77V125CRN Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues