AEG IKK86683FB Manuel utilisateur

Marque: AEG

Modèle: IKK86683FB

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

USER

MANUAL

EN User Manual 2

Hob

DE Benutzerinformation 27

Kochfeld

FR Notice d'utilisation 54

Table de cuisson

ES Manual de instrucciones 83

Placa de cocción

IKK86683FB

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 4

3. INSTALLATION.....................................................................................................7

4. PRODUCT DESCRIPTION...................................................................................9

5. DAILY USE......................................................................................................... 10

6. ADDITIONAL FUNCTIONS.................................................................................15

7. CARE AND CLEANING...................................................................................... 19

8. HINTS AND TIPS................................................................................................19

9. TROUBLESHOOTING........................................................................................22

10. TECHNICAL DATA........................................................................................... 24

11. ENERGY EFFICIENCY.....................................................................................25

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damage that are the result

of incorrect installation or usage. Always keep the

www.aeg.com2

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

Children of less than 8 years of age and persons with

very extensive and complex disabilities shall be kept

away from the appliance unless continuously

supervised.

• Children should be supervised to ensure that they do

not play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• WARNING: Keep children and pets away from the

appliance when it operates or when it cools down.

Accessible parts become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements.

• WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a lid

or a fire blanket.

• CAUTION: The appliance must not be supplied

through an external switching device, such as a timer,

ENGLISH 3

or connected to a circuit that is regularly switched on

and off by a utility.

• CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use the appliance before installing it in the

built-in structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and

do not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains.

In case the appliance is connected to the mains

directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to

the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

www.aeg.com4

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture from causing

swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance next to a

door or under a window. This

prevents hot cookware from falling

from the appliance when the door or

the window is opened.

• Each appliance has cooling fans on

the bottom.

• If the appliance is installed above a

drawer:

– Do not store any small pieces or

sheets of paper that could be

pulled in, as they can damage the

cooling fans or impair the cooling

system.

– Keep a distance of minimum 2 cm

between the bottom of the

appliance and parts stored in the

drawer.

• Remove any separator panels

installed in the cabinet below the

appliance.

2.2 Electrical Connection

WARNING!

Risk of fire and electric

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and

electric shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• This appliance is for household

(indoors) use only.

ENGLISH 5

• Do not change the specification of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and

oils when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the

glass surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

2.4 Care and cleaning

• Clean the appliance regularly to

prevent the deterioration of the

surface material.

• Switch off the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to dispose of the

appliance.

www.aeg.com6

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information below from the rating plate.

The rating plate is on the bottom of the

hob.

Serial number ...........................

3.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

3.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable,

use the cable type: H05V2V2-F which

withstands a temperature of 90 °C or

higher. The single wire must have a

diameter of minimum 1,5 mm². Speak

to your local Service Centre. The

connection cable may only be

replaced by a qualified electrician.

WARNING!

All electrical connections

must be made by a qualified

electrician.

CAUTION!

Connections via contact

plugs are forbidden.

CAUTION!

Do not drill or solder the wire

ends. It is forbidden.

CAUTION!

Do not connect the cable

without cable end sleeve.

One-phase connection

1. Remove the cable end sleeve from

black and brown wires.

2. Remove an insulation of the brown

and black cable ends.

3. Merge the black and brown cable

ends.

4. Apply a new wire end sleeve on the

common cable end (special tool

required).

Cable cross section 2x1,5 mm²

220-240 V~ 400V 2~N

One-phase connection - 220 - 240 V~ Two-phase connection - 400 V 2 ~ N

Green - yellow Green - yellow

N Blue and blue Blue and blue N

L Black and brown Black L1

Brown L2

ENGLISH 7

3.4 Assembly

If you install the hob under a hood,

please see the installation instructions of

the hood for the minimum distance

between the appliances.

min.

50mm

min.

500mm

65 ± 1mm

490± 1mm

55± 1mm

If the appliance is installed above a

drawer, the hob ventilation can warm up

the items stored in the drawer during the

cooking process.

Find the video tutorial "How to install

your AEG Induction Hob - Worktop

installation" by typing out the full name

indicated in the graphic below.

www.youtube.com/electrolux

www.youtube.com/aeg

How to install your AEG

Induction Hob - Worktop installation

www.aeg.com8

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

Induction cooking surface

Control panel

4.2 Control panel layout

1 2 4 5 63 10 117

Use the sensor fields to operate the appliance. The displays, indicators and sounds

tell which functions operate.

Sensor field Comment

To activate and deactivate the hob.

To activate and deactivate Lock or Child Safety Device.

To show the active zone.

CountUp Timer indicator.

Count Down Timer indicator.

- Timer display: 00 - 99 minutes.

To activate and deactivate Bridge and to switch between the

modes.

To select Timer functions.

ENGLISH 9

Sensor field Comment

To increase and decrease the time.

To activate and deactivate Hob²Hood.

To activate and deactivate Pause.

To activate PowerBoost.

- To set a heat setting: 0 - 9.

To activate and deactivate PowerSlide.

4.3 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / As long as the

indicator is on, there is a risk

of burns from residual heat.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

The indicators / / appear when a

cooking zone is hot. They show the level

of the residual heat for the cooking zones

you are currently using.

The indicator may also appear:

• for the neighbouring cooking zones

even if you are not using them,

• when hot cookware is placed on cold

cooking zone,

• when the hob is deactivated but the

cooking zone is still hot.

The indicator disappears when the

cooking zone has cooled down.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and

deactivating

Press and hold to activate or

deactivate the hob.

Control bars come on after you activate

the hob and go off after you deactivate

the hob. When the hob is deactivated

you can see only .

When you activate the hob and place the

cookware in the correct position, the hob

recognizes it and the appropriate control

panel lights up. The red cooking zone

indicator appears above the control bar

and indicates the position of the pot.

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• you do not place any cookware on the

hob for 50 seconds,

• you do not set the heat setting for 50

seconds after you place the

cookware,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth). When you

hear the acoustic signal, the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

www.aeg.com10

• you do not deactivate a cooking zone

or change the heat setting. After some

time, the hob deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

5.3 Heat setting

Press the desired heat setting on the

control bar. You can also move your

finger along the control bar to set or

change the heat setting for a cooking

zone.

To deactivate a cooking zone, press 0.

5.4 Using the hob

The induction cooking surface consists of

12 single triangular zones in total. The

triangular zones may be activated

separately or can be combined in pairs to

create 6 standard cooking zones. The

pairs of triangular zones can be further

combined together in various ways.

Each pair of triangles is controlled by the

appropriate control bar. Each square on

the control panel represents one

standard cooking zone on the induction

cooking surface.

One pair of triangles works

as a standard cooking zone.

Cookware

You may use various sizes of cookware:

small, medium, large. To learn how the

hob determines the cooking mode based

on the cookware refer to "Induction

cooking surface" below. For more

information on cookware, refer to "Hints

and tips".

5.5 Induction cooking surface

The hob automatically determines the

mode applicable to the size and the

shape of the cookware.

Place the cookware centrally on the

selected area. The cookware should

cover the selected area as much as

possible.

• Smaller cookware with the bottom

diameter between 100 mm and 160

mm should be placed centrally on a

single triangle.

• Medium-sized cookware with the

bottom diameter between 160 mm

and 210 mm should be placed on a

pair of triangles.

ENGLISH 11

• Cookware with the bottom diameter

between 240 mm and 350 mm should

be placed on four triangles.

• Oval-shaped cookware (e.g. roasting

tins) should be placed on vertical or

horizontal Bridge combinations.

The cookware must cover

3 or 4 triangles.

5.6 Using the control panel

and zone indicators

Two single triangles combined create a

standard cooking zone and are indicated

by the A B C D E F indicators.

FDB

ECA

B = 1+2

A = 3+4

D = 5+6

C = 7+8

F = 9+10

E = 11+12

Zone indicators indicate which standard

cooking zone is controlled by the

appropriate control bar. The hob has 6

control bars.

Cookware positions and zone

indicators

www.aeg.com12

For the combination indicated above,

there are four active control bars. The left

front pot is indicated by A indicator

visible on the first control bar. The left

rear pot is indicated by B indicator on the

second control bar. The middle pot is

indicated by indicators A B C D visible on

the third control bar. The right front pot is

indicated by C indicator visible on the

fourth bar.

It is not possible to use more

than 4 pots in this

combination.

5.7 Incorrect cookware

positions

ENGLISH 13

5.8 Bridge

If you place cookware on two or more

standard cooking zones and the heat

setting level is set to 0,

appears.

If the default configuration is not

appropriate for your cookware, press

repeatedly to choose the desired

configuration manually.

The following modes are available:

• Centre

• Vertical

• Horizontal

• Standard cooking zone

The cooking zone indicators change

automatically to show the possible

combination.

All single triangles of one mode are

controlled by one control bar which lights

up.

When you change the heat setting,

disappears. When the heat setting is set

to 0,

comes on again.

5.9 PowerBoost

This function activates more power for

the appropriate induction cooking zone,

depending on the cookware size. The

function can be activated only for a

limited period of time.

It is not possible to use the function when

Bridge is activated in the Centre, Vertical

or Horizontal mode.

To activate the function for the

cooking zone: touch . The symbol

turns red.

The function deactivates automatically.

For maximum duration

values, refer to "Technical

data".

5.10 Timer

• Count Down Timer

You can use this function to set the

length of a single cooking session.

First set the heat setting for the cooking

zone, then set the function.

To activate the function or change the

time: touch

. The timer digits 00 and

the indicators and light up on the

display. turns red, and turns white.

If the timer is not set, all

indicators disappear after 3

seconds.

Touch or to set the time (00 - 99

minutes). After 3 seconds, the timer

starts to count down automatically. The

indicators , , and disappear.

stays red.

When the timer finishes counting down, a

signal sounds and 00 flashes. To stop

the signal, touch .

To deactivate the function: touch .

The indicators and light up. Use

or to set 00 on the display.

Alternatively, set the heat level to 0. As a

result, a signal sounds and the timer is

cancelled.

• CountUp Timer

You can use this function to monitor how

long a cooking zone operates.

www.aeg.com14

To activate the function: touch

twice. The indicator turns red, the

timer starts automatically.

To deactivate the function: touch

When the indicators light up, touch .

• Minute Minder

You can use this function as a Minute

Minder when the hob is activated but the

cooking zones do not operate. To see

the Timer symbols, place a pot on a

cooking zone.

To activate the function: touch

until

the indicator

turns red. Touch or

to set the time. The function starts

automatically after 4 seconds. The

indicators , , and disappear.

stays red.

When you set the function, you can

remove the pot.

When the time comes to an end, a signal

sounds and 00 flashes. Touch

to stop

the signal.

To deactivate the function: touch .

The indicators and light up. Use

or to set 00 on the display.

The function has no effect

on the operation of the

cooking zones.

6. ADDITIONAL FUNCTIONS

6.1 Pause

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, all other

symbols on the control panels are

locked.

When the function is active,

and symbols can be

used. The function does not

stop the timer functions:

and .

To activate the function: touch . The

symbol turns red. The heat setting is

lowered to 1.

To deactivate the function: touch .

The symbol turns white. The previous

heat setting comes on.

6.2 Lock

You can lock the control panel while the

hob operates. It prevents an accidental

change of the heat setting.

Set the heat setting first.

To activate the function: touch . The

symbol turns red and blinks.

To deactivate the function: touch .

The symbol turns white.

When you deactivate the

hob, you also deactivate this

function.

6.3 Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the

hob. Do not set the heat setting. Touch

until it turns red and the control bar

disappears.

To deactivate the function: activate the

hob. Do not set the heat setting. Touch

until it turns white and the control bar

appears. Deactivate the hob.

6.4 PowerSlide

This function allows you to adjust the

temperature by moving the cookware to

a different position on the induction

cooking surface.

The function divides the cooking area

into three vertical cooking zones that

have different heat settings. The hob

detects the position of the cookware and

adjusts the pre-set power level

ENGLISH 15

accordingly. You can place the cookware

on the left, centre, or right vertical bridge.

General information:

• For this function, use cookware with

the minimum bottom diameter of 160

mm.

• The zone indicator indicates both

zones in a bridge even if only one of

the zones is used.

• You may adjust the heat setting

manually only if at least one of the

zones is activated automatically.

• You can change the heat settings for

each position separately. When you

deactivate the hob, it remembers your

heat settings and applies it next time

you activate the function.

• If you want to change the heat setting,

lift up the cookware and place it on a

different zone. Sliding the cookware

can cause scratches and

discolouration of the surface.

Activating the function

To activate the function, press . When

the function is activated, the symbol

turns red and the control bar displays the

pre-set power level.

If there is no cookware

detected on the cooking

zones, after 9 minutes an

acoustic signal sounds and

the cooking zones

deactivate automatically.

Press to resume this

function.

Adjusting power level

To adjust the power level, choose the

heat setting on the control bar.

Deactivating the function

To deactivate the function, press

6.5 OffSound Control

(Deactivating and activating

the sounds)

Deactivate the hob. Press for 3

seconds. The display comes on and

goes out. Press for 3 seconds. or

appears. Press of the timer to

choose one of the following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to

you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

6.6 Power limitation

The hob is set to its highest possible

power level by default.

To decrease or increase the power

level:

1. Deactivate the hob.

2. Press and hold

for 3 seconds.

The display comes on and goes off.

Press and hold

for 3 seconds.

or appears.

4. Press . P72 appears.

5. Press / of the timer to set the

power level.

Power levels

Refer to “Technical data” chapter.

CAUTION!

Make sure that the selected

power fits the house

installation fuses.

• P72 — 7200 W

• P15 — 1500 W

• P20 — 2000 W

• P25 — 2500 W

• P30 — 3000 W

• P35 — 3500 W

• P40 — 4000 W

• P45 — 4500 W

• P50 — 5000 W

• P60 — 6000 W

6.7 Power management

If multiple zones are active and the

consumed power exceeds the limitation

www.aeg.com16

of the power supply, this function divides

the available power between all cooking

zones. The hob controls heat settings to

protect the fuses of the house

installation.

• Cooking zones are grouped according

to the location and number of the

phases in the hob. Each phase has a

maximum electricity loading (3700 W).

If the hob reaches the limit of

maximum available power within one

phase or the selected total power

limit, the power of the cooking zones

will be automatically reduced.

• The heat setting of the cooking zone

selected last is always prioritised. The

remaining power will be divided

between the previously activated

cooking zones in reverse order of

selection.

• The heat setting display of the

reduced zones changes between the

initially selected heat setting and the

reduced heat setting.

• Wait until the display stops flashing or

reduce the heat setting of the cooking

zone selected last. The cooking zones

will continue operating with the

reduced heat setting. Change the

heat settings of the cooking zones

manually, if necessary.

Power management with Power

limitation

When you set the Power limitation

function to 6000 W or less, the power of

the hob is divided among all cooking

zones.

Refer to the illustration for possible

combinations in which power can be

distributed among the cooking zones.

When you set the Power limitation

function to more than 6000 W, the

power of the hob is divided among the

sections indicated below.

6.8 Hob²Hood

It is an advanced automatic function

which connects the hob to a special

hood. Both the hob and the hood have

an infrared signal communicator. The

speed of the fan is defined automatically

on the basis of the mode setting and the

temperature of the hottest cookware on

the hob. You can also operate the fan

manually.

For most of the hoods, the

remote system is originally

deactivated. Activate it

before you use the function.

For more information refer to

the hood user manual.

Operating the function automatically

To operate the function automatically set

the automatic mode to H1 – H6. The hob

is originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes the temperature of the

cookware and adjusts the speed of the

fan automatically.

Automatic modes

Auto‐

matic

light

Boiling

Frying

Mode H0 Off Off Off

Mode H1 On Off Off

Mode H2

On Fan

speed 1

Fan

speed 1

ENGLISH 17

Auto‐

matic

light

Boiling

Frying

Mode H3 On Off Fan

speed 1

Mode H4 On Fan

speed 1

Fan

speed 1

Mode H5 On Fan

speed 1

Fan

speed 2

Mode H6 On Fan

speed 2

Fan

speed 3

The hob detects the boiling process and acti‐

vates fan speed in accordance with automatic

mode.

The hob detects the frying process and acti‐

vates fan speed in accordance with automatic

mode.

This mode activates the fan and the light and

does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

2. Touch for 3 seconds. The display

comes on and goes off.

3. Touch for 3 seconds.

4. Touch repeatedly until comes

on.

5. Touch

to select an automatic

mode.

To operate the hood directly

on the hood panel deactivate

the automatic mode of the

function.

When you finish cooking and

deactivate the hob, the hood

fan may still operate for a

certain period of time. After

that time the system

deactivates the fan

automatically and prevents

you from accidental

activation of the fan for the

next 30 seconds.

Operating the fan speed manually

You can also operate the function

manually. To do that, touch when the

hob is active. The symbol turns white.

This deactivates automatic operation of

the function and allows you to change

the fan speed manually. When you press

, you raise the fan speed by one.

When you reach an intensive level and

press

again, you set the fan speed to

0, which deactivates the hood fan. The

symbol turns red. To start the fan again

at the fan speed 1 touch .

To activate the automatic

operation of the function,

deactivate the hob and

activate it again.

If the function is not active,

deactivates after 10

seconds. When the hob is

restarted, lights up again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the

hob. To do so, set the automatic mode to

H1 – H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

www.aeg.com18

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.

• Always use cookware with a clean

base.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner suitable for the

surface of the hob.

• Use a special scraper for the glass.

7.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

Use a special hob scraper on the

glass surface at an acute angle and

move the blade on the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and a non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a cloth.

8. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

8.1 Cookware

For induction cooking zones

a strong electro-magnetic

field creates the heat in the

cookware very quickly.

Use the induction cooking zones with

suitable cookware.

• The bottom of the cookware must be

as thick and flat as possible.

• Ensure pan bases are clean and dry

before placing on the hob surface.

• In order to avoid scratches, do not

slide or rub the pot across the ceramic

glass.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, multi-layer

bottom (with a correct marking from a

manufacturer).

• not correct: aluminium, copper,

brass, glass, ceramic, porcelain.

Cookware is suitable for an induction

hob if:

• water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

Cookware dimensions

Refer to "Induction cooking

surface" in "Daily use".

• Induction cooking zones adapt to the

dimension of the bottom of the

cookware automatically.

• The cooking zone efficiency is related

to the diameter of the cookware. The

cookware with a diameter smaller

than the minimum receives only a part

of the power generated by the

cooking zone.

• For both safety reasons and optimal

cooking results, do not use cookware

larger than indicated in "Cooking

zones specification". Avoid keeping

cookware close to the control panel

during the cooking session. This

might impact the functioning of the

control panel or accidentally activate

hob functions.

Refer to "Technical data".

Cookware types

ENGLISH 19

Depending on the cookware type you

use, the hob determines the appropriate

bridge mode. For example:

Single triangles, standard cooking

zones, centre mode

180 mm

210 mm

350 mm

100 mm

Vertical mode, horizontal modes

The cookware must cover 3

or 4 single triangles.

WARNING!

Do not use baking tray.

8.2 The noises during

operation

If you can hear:

• crack noise: cookware is made of

different materials (a sandwich

construction).

• whistle sound: you use a cooking

zone with a high power level and the

cookware is made of different

materials (a sandwich construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not

indicate any malfunction.

8.3 Öko Timer (Eco Timer)

To save energy, the heater of the

cooking zone deactivates before the

count down timer sounds. The difference

in the operation time depends on the

heat setting level and the length of the

cooking operation.

8.4 Examples of cooking

applications

The correlation between the heat setting

of a zone and its consumption of power

is not linear. When you increase the heat

setting, it is not proportional to the

increase of the consumption of power. It

means that a cooking zone with the

medium heat setting uses less than a

half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

1 Keep cooked food warm. as nec‐

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

www.aeg.com20

La page charge ...

AEG IKK86683FB Manuel utilisateur

Marque: AEG

Modèle: IKK86683FB

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: AEG IKK86683FB User manual
español: AEG IKK86683FB Manual de usuario
Deutsch: AEG IKK86683FB Benutzerhandbuch

AEG IKK86683FB Manuel utilisateur

AEG IKK86683FB Manuel utilisateur

dans d''autres langues

Documents connexes