Toshiba 20A42 Le manuel du propriétaire

Taper
Le manuel du propriétaire
20A42
3L70101A-E COVER-P.07 5/6/02, 11:33 AM1
2
Child Safety
It Makes A Difference
Where Your TV
Stands
Congratulations on your purchase! As you
enjoy your
new TV, keep these safety tips in mind:
The Issue
If you are like most Americans, you have a TV in your home.
Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
Toshiba Cares!
The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
childrens safety and educate
consumers and their families about
television safety.
Tune Into Safety
One size does NOT fit all! Use
appropriate furniture large enough to
support the weight of your TV (and other
electronic components).
Use appropriate angle braces, straps, and anchors to
secure your furniture to the wall (but never screw anything
directly into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with furniture and TVs.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of the
home with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES
®
Safety Precautions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Dear Customer,
Thank you for purchasing this Toshiba TV. This manual
will help you use the many exciting features of your new
TV. Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
NOTE TO CATV INSTALLERS IN THE USA
This is a reminder to call the CATV system installers
attention to Article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to
the grounding system of the building, as close to the
point of cable entry as practical. For additional antenna
grounding information, see items 24 and 25 on page 3.
NOTICE OF POSSIBLE ADVERSE EFFECTS
ON TV PICTURE TUBE
If a fixed (non-moving) pattern remains on the TV
screen for long periods of time, the image can
become permanently engrained in the picture tube.
This type of damage is NOT COVERED BY YOUR
WARRANTY. See item 32 on page 3.
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
NOTICE OF POSSIBLE TV STAND INSTABILITY
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH! Use this TV with
the TOSHIBA TV stand recommended in the
Specifications section only.
Use with other stands may
result in instability, causing possible injury or death.
3L70101A-E COVER-P.07 5/6/02, 11:33 AM2
3
Installation, Care, and Service
Installation
Follow these recommendations and precautions and
heed all warnings when installing your TV:
15) Never modify this equipment. Changes or
modifications may void: a) the warranty, and b) the
users authority to operate this equipment under the
rules of the Federal Communications Commission.
16) DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV
on an unstable cart, stand, or table.
The TV may fall, causing serious personal
injury, death, or serious damage to the TV.
17) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
18) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
19) Never place items such as vases,
aquariums, or candles on top of the TV.
20) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
on a bed, sofa, rug, or similar
surface;
too close to drapes, curtains,
or walls; or
in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
21) Never allow anything to rest on or roll over the
power cord, and never place the TV where the
power cord is subject to wear or abuse.
22) Never overload wall outlets and
extension cords.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near
water.
6) Clean only with a dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturers instructions.
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when
unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged
in any way, such as power supply
cord or plug is damaged, liquid
has been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed to rain
or moisture, does not operate normally, or
has been dropped.
QUALIFIED
SERVICE
TECHNICIAN
Wide plug
3L70101A-E COVER-P.07 5/6/02, 11:33 AM3
4
Ground clamp
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Power service grounding
electrode system (NEC Art 250 Part H)
Ground clamps
Antenna lead-in wire
Electric service equipment
QUALIFIED
SERVICE
TECHNICIAN
23)
Always operate this equipment from
a 120 VAC, 60 Hz power source only.
24) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges
(see Section 810 of the National Electric Code).
25)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
Use extreme care to make sure you
are never in a position where your body (or any item
you are in contact with, such as a ladder or
screwdriver) can accidentally touch overhead power
lines. Never locate the antenna near overhead power
lines or other electrical circuits.
Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any
home theater component connected to an antenna or
phone system.
Care
For better performance and safer operation of your
TOSHIBA TV, follow these recommendations and
precautions:
26) Always sit approximately 1025 feet away from the TV
and as directly in front of it as possible. The picture
can appear dull if you sit too far to the left or right of
the TV, or if sunlight or room lights reflect on the
screen. Turn the TV off to check for reflections on the
screen, and then remove the source of reflections
while viewing the TV.
27) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
28) WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
29) [
This item applies to projection TVs only.
] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses.
This can make the picture appear distorted or the color
appear faded. If this happens, turn off the TV for 6 to 7
hours to allow the condensation to evaporate.
30) For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave the TV
unattended or unused for long periods of time.
31) During normal use, the TV may make
occasional snapping or popping
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
32) Possible Adverse Effects on TV Picture Tube: If a
fixed (non-moving) pattern remains on the TV screen for
long periods of time, the image can become
permanently engrained in the picture tube and cause
subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY.
Never leave your TV on for long periods of time while it
is displaying the following formats or images:
Fixed Images, such as PIP/POP windows, stock
tickers, video game patterns, TV station logos, and
websites.
Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Service
33) WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
34) If you have the TV serviced:
Ask the service technician to use only replacement
parts specified by the manufacturer.
Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
35) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the
TV. Improper disposal may result in a picture tube
implosion and possible personal injury.
3L70101A-E COVER-P.07 5/6/02, 11:33 AM4
5
ANT.
IN
VIDEO
AUDIO
L
R
FEATURES
LOCATION OF CONTROLS
181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that
are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
On-Screen 3 Language Display - This TV can display the on-screen language in English, Spanish or French.
Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.
Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the
TV should occur.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with
this information. V-Chip will allow you to set a restriction level.
Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS,
COLOR, CONTRAST, SHARPNESS and TINT.
Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.
Stereo/SAP Reception - This TV is designed to receive stereo and second audio program (SAP) broadcasts
where available.
Lock feature - This feature has three functions, LOCKING CHANNELS, LOCKING VIDEO INPUT and SETTING
THE GAME TIMER.
FRONT BACK
13
4
6
8
5
10
1. POWER Button - Press to turn the TV on or off.
2. Remote Sensor - Signals from the Remote Control
unit are received here.
3. POWER indicator - Lights up when the power is
turned on.
4. CHANNEL / Buttons - Press to select a higher or
lower numbered channel set into memory.
(ENTER Button) - Press to enter or select information
for On-Screen operations.
(RESET Button) - Press, while in the On-Screen
menu mode, to reset the On-Screen picture adjust-
ments to their factory preset positions.
5. VOLUME / Buttons - Press to raise or lower the
level of the sound.
(MENU Buttons) - Press both VOLUME / buttons
at the same time to display the On-Screen menu func-
tions.
(SET + / Buttons) - Press to select the desired set-
ting during On-Screen operations.
6. AUDIO/VIDEO IN (VIDEO 2) Jacks - Audio and video
signal cables from an external source can be con-
nected here.
7. PHONE (Earphone) Jack - Plug an earphone or
monaural headphones with a 1/8 miniplug into this
jack for private listening.
8. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
9. AUDIO/VIDEO IN (VIDEO 1) Jacks - Audio and
video signal cables from an external source can be
connected here.
10. AC Power Cord - Plug into an outlet with 120V,
60 Hz AC power only.
9
72
3L70101A-E COVER-P.07 5/6/02, 11:33 AM5
6
MENU
VOL
SLEEP
MUTE
CH RTN RECALL
VOL
+
ENTER
CH
CH +
123
456
7
0
89
SET
+
1/2
CAP/TEXT
RESET MTS
TV/VIDEO
POWER
4. SLEEP Button - To set the TV to turn off after a preset
amount of time, press the SLEEP button on the remote
control. The clock will count down 10 minutes each time the
button is pressed in the order of 120, 110, 100, ······ 20, 10,
0. After the sleep time is programmed, the display will
disappear then reappear momentarily every ten minutes to
remind you the sleep timer function is operating. To confirm
the sleep time setting, press the SLEEP button once and the
remaining time will be momentarily displayed. To cancel
sleep time, press the SLEEP button repeatedly until the
display turns to 0.
5. VOL (VOLUME) + / Buttons - Press the + button to
increase, or the button to decrease the volume level.
6. MENU Button - Press to display the On-Screen menu
function.
7. SET + / Buttons - Press to select the desired setting
during On-Screen operations.
8. RESET Button - Press to reset the On-Screen picture
adjustments to their factory preset positions.
9. TV/VIDEO Button - Switches between TV and external
inputs.
10. RECALL Button - When you press this button, the channel
number will appear in the upper right corner of the screen.
Press the button again to remove it from the screen.
11. MUTE Button - To turn off the sound, press this button
once. The TV will be silenced and the symbol MUTE will
appear on the screen. The muting feature can be released
by pressing the MUTE button again or one of the VOL + or
buttons.
12. CH (CHANNEL) + / Buttons - Press the + button to
change to a higher numbered channel set into memory.
Press the button to change to a lower numbered channel
set into memory.
13. ENTER Button - Press to enter or select information for On-
Screen operations.
14. MTS Button - Switches sound between mono, stereo, and
SAP when receiving broadcasts in stereo or SAP.
15. 1/2 Button - Switches between Channel 1 and Channel 2 in
the Closed Caption mode.
16. CAP/TEXT Button - Press this button to switch between
normal TV and the two Closed Caption modes (captions and
1/2 of full screen text). Closed Captioning will display text on-
screen for hearing impaired viewers.
REMOTE CONTROL
1. Open the battery compartment cover.
2. Install two "AAA" (penlight size) batteries.
HOW TO INSTALL BATTERIES
Before using the remote control, batteries must first be installed.
3. Replace the battery compartment cover.
1. POWER Button - Press to turn on the TV. Press again
to turn off the TV.
2. Direct Channel Selection Buttons (0-9) - Allows direct
access to any channel.
3. CH RTN Button - This button allows you to go back to the
previous channel selected by pressing the CH RTN
button. Press this button again to return to the channel you
were watching.
1
2
3
5
6
7
8
9
10
11
12
13
16
4
15
14
Use two "AAA" size penlight batteries (supplied) for the
transmitter. The batteries may last approximately one year
depending on how much the remote control is used. For
best performance, it is recommended that batteries should
be replaced on a yearly basis, or when the remote operation
becomes erratic. Do not mix old and new batteries or
different types.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries
in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture. (Follow battery
manufacturer's directions.)
3L70101A-E COVER-P.07 5/6/02, 11:33 AM6
7
ANT.
IN
VIDEO
AUDIO
L
R
CONVERTER/ DESCRAMBLER
A
B
A / B SWITCHSPLITTER
CONVERTER/ DESCRAMBLER
ANT.
IN
VIDEO
AUDIO
L
R
ANTENNA/CATV CONNECTIONS
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF antenna and the UHF
antenna twin-lead to a combiner (not supplied). Attach the
combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-lead wire, use the 300-75
ohm matching transformer (not supplied), then connect the trans-
former to the combiner.
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a converter/descrambler
box, connect the CATV 75 ohm coaxial cable directly to the
antenna jack on the back of the television.
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service which requires the use of a
converter/descrambler box, connect the incoming cable to the
converter/descrambler box and connect the output of the box to
the antenna jack on the back of the television. Follow the
connections shown left. Set the television to the output of the
converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.
For Subscribers to Unscrambled Basic Cable with
Scrambled Premium Channels
If you subscribe to a cable service in which basic cable channels
are unscrambled and premium channels require the use of a
converter/descrambler box, you may wish to use a two-set signal
splitter (sometimes called a "two-set coupler") and an A/B switch
box from the cable installer or an electronics supply store. Follow
the connections shown left. With the switch in the "B" position, you
can directly tune any nonscrambled channels on your TV. With
the switch in the "A" position, tune your TV to the output of the
converter/descrambler box (usually channel 3 or 4) and use the
box to tune scrambled channels.
300-75 OHM
MATCHING TRANSFORMER
(not supplied)
COMBINER
(not supplied)
300-75 OHM
MATCHING TRANSFORMER
(not supplied)
VHF Antenna
Incoming CATV
Single 75 ohm Cable
Combination VHF/UHF Antenna
300 ohm Twin-lead Wire
Splitter
Take off the Splitter
Single 75 ohm Cable
300 ohm Twin-lead Wire
300 ohm Twin-lead Wire
UHF Antenna
Combination VHF/UHF Antenna (Single 75 ohm cable or 300
ohm twin-lead wire)
Connect the 75 ohm cable from a combination VHF/UHF
antenna to the antenna jack.
If your combination antenna has a 300 ohm twin-lead wire, use
the 300-75 ohm matching transformer (not supplied).
Combination VHF/UHF Antenna (Separate VHF and UHF 300
ohm twin-leads)
Connect the UHF twin-lead wire to a combiner (not supplied).
Connect the VHF twin-lead to the 300-75 ohm matching
transformer (not supplied). Attach the transformer to the
combiner. Attach the combiner to the antenna jack.
This television has an
extended tuning range and
can tune most cable channels
without using a cable
company supplied converter
box. Some cable companies
offer "premium pay channels"
in which the signal is
scrambled. Descrambling
these signals for normal
viewing requires the use of a
descrambler device which is
generally provided by the
cable company.
CONNECTION TO OTHER EQUIPMENT
The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features
of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular
assortment of components. The diagrams are intended to show component video and audio interconnections only.
If you connect the TV to a VCR, camcorder or TV game, you
can select by pressing TV/VIDEO.
Press TV/VIDEO repeatedly to select the desired
mode."VIDEO1" or "VIDEO2" will display on the screen for 4
seconds.
TV/VIDEO SELECTION
1. To connect the TV to a VCR
The TV also can be used as a display device for many video
games. However, due to the wide variety of different types of
signal generated by these devices and subsequent hook-up
variations required, they have not all been included in the
suggested connection diagrams. You will need to consult each
component's Owner's Manual for additional information.
2. To connect the TV to a TV Game
Rear of TV
VCR
(not supplied)
To Audio/
Video OUT
AUDIO (L)
VIDEO
To playback from the camcorder, connect the camcorder to
the TV as shown.
3. To connect the TV to a camcorder
AUDIO (R)
TV VIDEO 1 VIDEO 2
TV GAME
To Audio/Video OUT
Front of TV
(not supplied)
Front of TV
(not supplied)
To AV OUT jack
3L70101A-E COVER-P.07 5/6/02, 11:33 AM7
8
DIRECT CHANNEL SELECTION buttons (0-9) - Press
these buttons to select a channel. The channel number will
appear on the upper right corner of the TV screen. If an
invalid channel number is selected, the display will revert to
the previous channel.
TV MODE DIRECT CHANNEL SELECTION - When the
TV/CABLE menu option is in
the TV position, all channels
can be instantly selected by using two buttons (For example,
to select channel 2, press "0," then "2." If you press only "2,"
channel selection will be delayed for a few seconds). For
channels 10 and above, press the two digits in order.
TV - VHF/UHF channels
CABLE - CABLE TV channels
To turn on the TV, press POWER.
The VOLUME can be adjusted to a desired level by
pressing VOL (VOLUME) + or .
The sound level will be indicated on the TV screen by
GREEN BARS AND A NUMBER. As the sound level
increases, so do the number of BARS AND THE
NUMBER on the screen. The same is true for decreas-
ing the level.
Set the TV/CABLE menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CATV setting. See "TO MEMORIZE
CHANNELS."
TV OPERATION
CABLE mode direct channel selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
1-9
10-12
13-99
100-125
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
Press "0", then remaining 2 digits.
Example, to select channel 12, press
"012".
Press the 2 digits in order.
Example, to select channel 36, press
"36".
Press the 3 digits in order.
Example, to select channel 120, press
"120".
1
2
3
4
CH (CHANNEL) + and – buttons
Press and release CH (CHANNEL) + or . The
channel automatically stops at the next channel set
into memory. Press and hold the button down to
change channels more quickly.
For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS."
SETTING LANGUAGE
This TV can display the channel number, on-screen displays and picture adjustments on the screen in English, Spanish or
French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select
the language you prefer first, then proceed with the other menu options.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.
Press SET + or until the "
"
indicator points to the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
1
2
3
4
Press MENU.
Press SET + or to select the
LANGUAGE mode, then press
ENTER.
Press MENU again.
NOTE: If the station being viewed stops broadcasting, the TV
will automatically shut off after 15 minutes.
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
AUDIO
MENU
+
/
/ ENTER / MENU
FRANCAIS
ENGLISH
ESPAÑOL
LANGUAGE / IDIOMA / LANGUE
+
/
/ ENTER / MENU
3L70101A-E P.08-13 5/6/02, 11:34 AM8
9
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV's
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
Press MENU.
Press SET + or until the indicator next to
"CH SET" begins to flash, then press
ENTER.
Press SET + or until the indicator next
to "TV/CABLE" begins to flash.
Press ENTER to select the TV or CABLE
mode. The arrow indicates the selected
mode.
Press MENU repeatedly until the
MENU screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
Press MENU repeatedly until the MENU screen is
cleared.
TO ADD/DELETE CHANNELS
Press MENU.
Press SET + or until the indicator next to
"CH SET" begins to flash, then press
ENTER.
Press SET + or until the indicator
next to "ADD/DELETE" begins to
flash, then press ENTER.
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0-9), CH +
or or SET + or .
1
2
3
4
5
4
1
2
3
4
5
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press ENTER if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. Press ENTER if you wish to
Press MENU repeatedly until the MENU screen is
cleared.
6
DELETE the channel from memory.
The channel indicator will change from
green to red when a channel is de-
leted. Repeat Steps 4 and 5 for each
channel to be added or deleted.
MENU
+
/
/ ENTER / MENU
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
AUDIO
ADD CH 012
0 9 / + / / ENTER / MENU
MENU
+
/
/ ENTER / MENU
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
AUDIO
AUTOMATIC CHANNEL MEMORY
Press MENU.
Press SET + or until the indicator next to
"CH SET" begins to flash, then press
ENTER.
1
2
MENU
+
/
/ ENTER / MENU
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
AUDIO
Press SET + or until the indicator next
to "AUTO CH MEMORY" begins to flash,
then press ENTER. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
3
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
1
2
4
Press SET + or button to adjust the setting.
CONTRAST COLORBRIGHTNESS TINT SHARPNESS
3
Press MENU.
Press SET + or until the indicator next to "PICTURE"
begins to flash, then press ENTER.
Press ENTER repeatedly to select the item you want to
adjust.
TO RETURN TO INITIAL SETTING
Press RESET while the picture adjusting mode appears
on-screen.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
increase brightness
increase contrast
brilliant color
greenish color
decrease brightness
decrease contrast
pale color
reddish color
makes picture softer
makes picture clearer
3L70101A-E P.08-13 5/6/02, 11:34 AM9
10
NOTES:
V-Chip function is based on specifications for the United States and therefore may not work properly in Canada.
If you want to change your password, follow steps 1 and 2 and select "CHANGE PASSWORD" option. Then enter your new
password.
The V-Chip function is activated only on programs and tapes that have the rating signal.
Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the show.
When the program starts, the "INPUT PASSWORD" will appear on the screen. When you want to release the V-Chip
temporarily, enter the password.
If you change the channel or turn off the TV while the V-Chip function was temporarily released, the original setting will be
resumed. If you return to the channel you were watching you must re-enter your password to temporarily release your V-Chip
function again.
When you watch the TV using a cable box or a VCR and the TV is tuned to channel 3 or 4, you must release the V-Chip
temporarily. The V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case.
When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program appears.
SETTING V-CHIP
This TV is fitted with a V-CHIP controller that provides you with channel viewing access controls and restrictions. This function is to
prevent your children from watching violent or sexual scenes that you may choose to exclude.
Press MENU and press SET + or until the indicator next
to "V-CHIP SET" begins to flash, then press ENTER.
Enter your password (4 digits) using the Direct channel
selection buttons (0-9).
In the event of entering an incorrect password press
RESET. Then press ENTER.
Enter the same password for confirmation, then press
ENTER.
Press SET + or until the indicator next to "V-CHIP"
begins to flash.
Press ENTER to select ON.
Press SET + or until the indicator next to "TV RATING" or
"MPAA RATING" begins to flash. Press ENTER.
Press SET + or to select the desired rating for the
applicable video or TV channel. Press ENTER.
Press MENU repeatedly until the MENU screen is cleared.
1
3
4
5
6
7
2
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to
explain the rating.
Press the SET + or to select the desired rating you want. Press ENTER
to select the setting ON or OFF.
TV RATING
MPAA RATING
OFF
PG PG-13 R NC-17
SET SET +
XG
OFF
TV-Y7 TV-G TV-14
TV-MA
SET SET +
TV-Y TV-PG
: all children
: 7 years old and above
: children's program
TV-PG
TV-14
TV-MA
: parental guidance
: 14 years old and above
: 17 years old and above
TV-Y
TV-Y7
TV-G
: all ages
: parental guidance
:
parental guidance less
than 13 years old
R
NC-17
X
: under 17 years old parental
guidance suggested
: 17 years old and above
: adult only
G
PG
PG-13
SOUND ADJUSTMENTS
NOTE: The on-screen display will disappear 6 seconds after
finishing an adjustment. The settings can only be
adjusted when they are displayed on the TV screen.
Sound controls are factory preset but you can adjust them
individually as follows:
To display sound adjustments on the screen, press MENU.
Press SET + or to select the AUDIO option, then press ENTER.
BALANCE
Press ENTER until BALANCE appears on the screen, then
press SET + or button to obtain an equal sound level from
both speakers.
RESET
Pressing RESET while making sound adjustments will
return all adjustments to the factory preset levels.
BASS
Press ENTER until BASS appears on the screen, then press
SET + or to adjust the bass sound.
TREBLE
Press ENTER until TREBLE appears on the screen, then
press SET + or to adjust the treble sound.
3L70101A-E P.08-13 5/6/02, 11:34 AM10
11
The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greatly enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO SAP (SECOND AUDIO PROGRAM)
When the TV is turned on or a channel selection is made,
the letters SAP appear on the screen when Second Audio
Program broadcasting is received.
STEREO AND SECOND AUDIO PROGRAM (SAP)
VIDEO LOCK
+
/
/ ENTER / MENU
OFF
VIDEO
VIDEO+
LOCKING VIDEO INPUT
With the VIDEO LOCK feature, you can lock out the input
source (VIDEO) and channel 3 and 4.
You will not be able to select the input sources with the TV/
VIDEO button or Channel buttons unless you clear the setting.
1
2
3
4
5
GAME TIMER
+
/
/ ENTER / MENU
OFF
30
60
90
Press MENU, then press SET + or
until the indicator next to "LOCK" begins
to flash, then press ENTER.
Use the Channel Number buttons (0-9) to
enter your password, then press ENTER.
The LOCK menu appears.
Press SET + or until the indicator next to "VIDEO LOCK"
begins to flash, then press ENTER.
Press SET + or to select:
OFF: Unlocks all video input sources.
VIDEO: Locks VIDEO.
VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to play a video tape.
Press MENU to return to normal viewing.
1
2
3
4
SETTING THE GAME TIMER
With the GAME TIMER feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a TV game (30, 60, or 90 minutes).
5
Press MENU, then press SET + or until
the indicator next to "LOCK" begins
to flash, then press ENTER.
Use the Channel Number buttons (0-9)
to enter your password, then press ENTER.
The LOCK menu appears.
Press SET + or until the indicator next to "GAME
TIMER" begins to flash, then press ENTER.
Press SET + or to select a time limit (30 minutes, 60 minutes,
90 minutes or OFF).
Press MENU repeatedly until the MENU screen is cleared.
After the GAME TIMER is programmed, the display will appear
briefly every ten minutes to remind you that the GAME TIMER
is operating. When the programmed end time is reached, the
display will change the last channel automatically.
USING THE LOCK MENU
LOCK
+
/
/ ENTER / MENU
GAME TIMER
CH LOCK
VIDEO LOCK
CHANGE PASSWORD
1
2
3
4
6
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING
V-CHIP".)
5
LOCKING CHANNELS
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting.
You can choose to lock up to nine TV channels and nine cable channels.
Use the Channel Number Buttons (0-9)
to display the television channel you wish
to lock.
Press MENU, then press SET + or until
the indicator next to "LOCK" begins to
flash. Then press ENTER.
Use the Channel Number buttons (0-9) to enter your password,
then press ENTER.
The LOCK menu appears.
Press SET + or until the indicator next to "CH LOCK"
begins to flash, then press ENTER.
Press SET + or to select:
INPUT to select the channel as one to
be locked. Then press ENTER.
ALL CLEAR to clear all channels from
the list of locked channels. Then press
ENTER
Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, press MENU repeatedly until
the MENU screen is cleared.
NOTES:
If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
After programming CH LOCK, change channels before turning
off the television.
If you want to unlock channels, select ALL CLEAR on step 5,
then press ENTER.
CH LOCK
+
/
/ ENTER / MENU
CABLE
INPUT
ALL CLEAR
--- --- ---
--- --- ---
--- --- ---
If you try to tune a locked channel, the TV will not display it, but will
display the nearest unblocked channel.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made,
the word STEREO appears on the screen. This means
that "Stereo" broadcasting is received. When enjoy stereo
sound from the left and right speakers.
When "Mono" broadcasting is received, no indication is
displayed.
If the broadcast signal is not strong enough or clear stereo
sound is not available, press MTS to change to mono
sound. The noise should be eliminated. Press it again to
return to stereo sound.
TO SELECT DESIRED SOUND
Press MTS to select the desired sound.
MONO+SAP BROADCASTING
SAP SOUND
MAIN SOUND
(MONO)
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(STEREO)
STEREO+SAP BROADCASTING
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(MONO)
SAP SOUND
3L70101A-E P.08-13 5/6/02, 11:34 AM11
12
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS POSSIBLE SOLUTIONS
SYMPTOMS POSSIBLE SOLUTIONS
TV does not
operate
Poor sound
or No sound
Poor picture
or No picture
Picture
wobbles or
drifts
Poor color or
no color
Poor
reception on
some
channels
Make sure the power cord is plugged in.
Try another AC outlet.
Power is off; check fuse or circuit breaker.
Unplug unit for an hour, then plug it back in.
Station or CATV experiencing problems;
tune to another station.
Check sound adjustments (VOLUME and
MUTE).
Check for sources of possible interference.
Station or CATV experiencing problems; tune
to another station.
Make sure channels are set into memory.
Check antenna or CATV connections; adjust
antenna.
Check for sources of possible interference.
Check picture control adjustments.
Station or CATV experiencing problems; tune
to another station.
Make sure channels are set into memory.
Station is weak; adjust antenna to receive
desired station.
Check for sources of possible interference.
Station or CATV experiencing problems; tune
to another station.
Make sure channels are set into memory.
Check picture control adjustments.
Check antenna or CATV connection. Adjust
antenna.
Station or CATV experiencing problems; tune
to another station.
Make sure channels are set into memory.
CATV company is scrambling signal.
Adjust antenna.
Check all CATV connections.
Set TV/CABLE menu option to the CABLE
mode.
Station or CATV system problems; try
another station.
Check antenna connections; reorient antenna.
Check for sources of possible interference.
Horizontal or
diagonal bars
on screen
No reception
above
channel 13
No CATV
reception
Batteries are weak, dead or inserted
incorrectly.
Remote is out of range; move closer to TV
(within 15 feet).
Make sure Remote is aimed at sensor.
Confirm there are no obstructions between
the Remote and the TV.
Make sure the power cord is plugged in.
Make sure TV/CABLE menu option is in the
appropriate mode.
If using antenna, check UHF antenna
connections.
No Remote
operation
No broadcast on station tuned.
Sleep Timer is set.
Power interrupted.
TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
Check CATV connection or VHF/UHF
antenna, reposition or rotate antenna.
Press CAP/TEXT to turn on the closed caption
decoder.
Closed -
Caption is not
activated
TV shuts off
Select proper language in the menu options.
Display is not
shown in
your language
CLOSED CAPTION
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed
Captioned television programs. Closed Captioning will display text on
the screen for hearing impaired viewers or it will translate and display
text in another language.
TO VIEW CLOSED CAPTIONS
Press CAP/TEXT on the remote control to switch between normal TV
and the two Closed Caption Modes (Captions and 1/2 of Full Screen
Text).
Captions: This Closed Caption Mode will display text on the screen in
English or another language (depending on the setting of Closed
Captions 1/2. Generally, Closed Captions in English are transmitted
on Captions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen.
Closed Captioned text is only displayed in locations where it is available.
If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed Captioning, especially with
live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.
When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed Captions.
Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange characters or
misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
The Captions will appear in places on the screen where they will least
interfere with the picture, usually on the bottom of the screen. News
programs will usually show three-line Closed Captions which scroll
onto the screen. Most other shows provide two or three lined Captions
placed near the character who is speaking so the viewer can follow
the dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are sung
usually appear enclosed by musical notes.
Text: The Text Closed Caption Mode will usually fill 1/2 of full screen
with a programming schedule or other information. After selecting a
Closed Caption Mode, it will stay in effect until it is changed, even if
the channel is changed. If the Captions signal is lost due to a
commercial or a break in the signal, the Captions will reappear when
the signal is received again. If the channels are changed, the Captions
will be delayed approximately 10 seconds.
For television programs broadcasting with Closed Captions, look in
your TV guide for the Closed Captions symbol (CC).
3L70101A-E P.08-13 5/6/02, 11:34 AM12
13
SPECIFICATIONS
AC Power Input:
AC Power Consumption:
Picture Tube:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:
Antenna Input Impedance:
Input:
Dimensions:
Weight:
120V, 60Hz
90 Watts
Type 20 (508mm diagonal)
2.5 + 2.5 Watts
2 inches (51mm) x 4 -11/16 inches (119mm)
Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency Synthe-
sized
Infrared, Direct Access,
2 x AAA batteries (supplied)
VHF 2-13
UHF 14-69
CATV 01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
75 Ohm (VHF/UHF) Coaxial Input
Video: 1.0 Vp-p 75 ohm
Audio: 300 mV, 47k ohm
Width: 23-1/4 inches (590mm)
Height: 17-9/16 inches (446.5mm)
Depth: 19-3/8 inches (492mm)
41.0 Ibs (18.6 kg)
Remote Control with two size AAA batteries
ACCESSORY
Design and specifications are subject to change without notice.
3L70101A-E P.08-13 5/6/02, 11:34 AM13
14
Limited United States Warranty
For 24” FST PURE
®
and All Smaller Television Models
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii, Inc. (“THI”) make the following limited warranties
to
original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER
OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty on Labor*
TACP/THI warrant this television and its parts against defects in materials or workmanship for a period of ninety (90)
days after the date of original retail purchase. DURING THIS PERIOD, TACP/THI WILL, AT TACP/THI’S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU
FOR PARTS OR LABOR. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TACP/THI SERVICE
STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO
AND FROM THE SERVICE STATION.
Limited One (1) Year Warranty on Parts*
TACP/THI further warrant the parts in this television against defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. DURING THIS PERIOD, TACP/THI WILL, AT TACP/THI’S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU
FOR THE PART, PROVIDED THAT IF A DEFECTIVE PART IS REPAIRED OR REPLACED AFTER NINETY (90) DAYS
FROM THE DATE OF ORIGINAL RETAIL PURCHASE, YOU MUST PAY ALL LABOR CHARGES INVOLVED IN THE
REPAIR OR REPLACEMENT. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TACP/THI
SERVICE STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE
TELEVISION TO AND FROM THE SERVICE STATION.
Limited Two (2) Year Warranty on Picture Tube*
TACP/THI further warrant the picture tube in this television against defects in materials or workmanship for a period of
two (2) years after the date of original retail purchase. DURING THIS PERIOD, TACP/THI WILL, AT TACP/THI’S
OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED PICTURE TUBE
WITHOUT CHARGE TO YOU, EXCEPT THAT IF A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED
AFTER NINETY (90) DAYS FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE, YOU MUST PAY ALL LABOR
CHARGES INVOLVED IN THE REPAIR OR REPLACEMENT. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN
AUTHORIZED TACP/THI SERVICE STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE STATION.
Rental Units
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited ninety (90) day warranty for all parts, labor and
picture tube.
Owner’s Manual and Demographic Card
You should read this owner’s manual thoroughly before operating this television. You should complete and mail the
enclosed Demographic card within ten days after you, or the person who has given you this product as a gift, purchased
this television. This is one way to enable TACP/THI to provide you with better customer service and improved product.
Failure to return the Demographic card will not affect your rights under this warranty.
3L70101A-E P.14-BACK 5/6/02, 11:37 AM14
15
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an Authorized TACP/THI Service Station.
(3) The warranties from TACP and THI are effective only if the television is purchased and operated in the U.S.A. or
Puerto Rico.
(4) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair of
antenna
systems are not covered by these warranties. Reception problems caused by inadequate antenna systems are your
responsibility.
(5) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any television
or parts which have been lost or discarded by you or to damage to television or parts caused by misuse, accident,
Acts of God, such as lightning or fluctuations in electric power, improper installation, improper maintenance or use
in violation of instructions furnished by TACP/THI; or to units which have been modified or had the serial number
removed, altered, defaced or rendered illegible.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and checking the section Troubleshooting, you find that
service is needed:
(1) To find the nearest TACP/THI Authorized Service Station:
For televisions purchased in the United States, except Hawaii, visit TACPs web site at
www.toshiba.com/tacp or
call toll free 1-800-631-3811.
For televisions purchased in Hawaii, contact Toshiba Hawaii, Inc., 327 Kamakee Street, Honolulu, HI 96814, (808) 591-
9281.
(2) Present your bill of sale or other proof of purchase to the Authorized Service Station. You must deliver the entire
television to an Authorized TACP/THI Service Station. You must pay for all transportation and insurance charges
for the television to and from the Service Station.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DU-
RATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS AND SIMILAR
OBLIGATIONS OF TACP OR THI WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP OR THI BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties
in any manner whatsoever. The time within which action must be commenced to enforce any obligation of TACP or THI
arising under this warranty or under any law of the United States or of any state thereof is hereby limited to 90 days from
the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising
under the law of any state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
FST PURE
®
is a registered trademark of Toshiba America Consumer Products, Inc.
For additional information,
visit TACPs web site:
www.toshiba.com/tacp.
3L70101A-E P.14-BACK 5/6/02, 11:37 AM15
16
Limited Canada Warranty
For 24 FST PURE
®
and All Smaller Television Models
Toshiba of Canada Limited (TCL) makes the following limited warranties to original consumers in Canada. THESE
LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS TELEVISION
AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER
OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty on Labor*
TCL warrants this television and its parts against defects in materials or workmanship for a period of ninety (90) days
after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCLS OPTION, REPAIR OR REPLACE
A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOR.
YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE STATION. YOU MUST PAY
FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE
STATION.
Limited One (1) Year Warranty on Parts*
TCL further warrants the parts in this television against defects in materials or workmanship for a period of one (1) year
after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCLS OPTION, REPAIR OR REPLACE
A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR THE PART,
PROVIDED THAT IF A DEFECTIVE PART IS REPAIRED OR REPLACED AFTER NINETY (90) DAYS FROM THE
DATE OF ORIGINAL RETAIL PURCHASE, YOU MUST PAY ALL LABOR CHARGES INVOLVED IN THE REPAIR OR
REPLACEMENT. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE STATION.
YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM
THE SERVICE STATION.
Limited Two (2) Year Warranty on Picture Tube*
TCL further warrants the picture tube in this television against defects in materials or workmanship for a period of two
(2) years after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCLS OPTION, REPAIR OR
REPLACE A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED PICTURE TUBE WITHOUT CHARGE
TO YOU, EXCEPT THAT IF A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED AFTER NINETY (90)
DAYS FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE, YOU PAY ALL LABOR CHARGES INVOLVED IN
THE REPAIR OR REPLACEMENT. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL
SERVICE STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE
TELEVISION TO AND FROM THE SERVICE STATION.
Rental Units
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited ninety (90) day warranty for all parts, labor and
picture tube.
Owners Manual
You should read this owners manual thoroughly before operating this television.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an Authorized TCL Service Station.
3L70101A-E P.14-BACK 5/6/02, 11:37 AM16
17
(3) The warranties from TCL are effective only if the television is purchased in Canada from an authorized TCL dealer
andoperated in Canada.
(4) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair of
antenna systems are not covered by these warranties. Reception problems caused by inadequate antenna systems
are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any television
or parts which have been lost or discarded by you or to damage to television or parts caused by misuse, accident,
Acts of God, such as lightning or fluctuations in electric power, improper installation, improper maintenance or use
in violation of instructions furnished by TCL; or to units which have been modified or had the serial number
removed, altered, defaced or rendered illegible.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and checking the section Troubleshooting, you find
that service is needed:
(1) To find the nearest TCL Authorized Service Station visit TCLs web site at www.toshiba.ca
(2)
Present your bill of sale or other proof of purchase to the Authorized Service Station. You must deliver the entire
television
to an Authorized TCL Service Station. You must pay for all transportation and insurance charges for the
television to and from the Service Station.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA, INCLUDING THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE
DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS AND SIMILAR OBLIGA-
TIONS OF TCL WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TCL
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties
in any manner whatsoever. The time within which action must be commenced to enforce any obligation of TCL arising
under this warranty or under any law of Canada or of any province thereof, is hereby limited to 90 days from the date
you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under
the law of any province of Canada.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
MAY VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME PROVINCES OF CANADA DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, WHEN AN ACTION MAY BE BROUGHT, OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
FST PURE
®
is a registered trademark of Toshiba America Consumer Products, Inc.
For additional information,
visit TCLs web site:
www.toshiba.ca
3L70101A-E P.14-BACK 5/6/02, 11:37 AM17
3L70101A U
02/04
PRINTED IN THAILAND
3L70101A-E P.14-BACK 5/6/02, 11:37 AM18
20A42
3L70101A-F COVER 5/6/02, 11:37 AM1
2
Sécurité des enfants
L’emplacement de votre téléviseur
est important
Félicitations pour votre
achat! Tout en profitant de
votre nouveau téléviseur,
n’oubliez pas les conseils de
sécurité suivants :
Le problème
Si vous êtes comme la plupart des Nord-Américains, vous avez
un téléviseur chez vous. Beaucoup de foyers en ont même plusieurs.
L’expérience du cinéma maison se répand, et les gens
achètent des téléviseurs de plus en plus grands; cependant,
ceux-ci ne sont pas toujours posés sur des meubles adaptés.
Parfois, les téléviseurs sont mal fixés ou mal placés sur une
commode, une bibliothèque, une étagère, un bureau, un haut-
parleur, un coffre ou un chariot. Le téléviseur risque donc de
se renverser ou de tomber, causant ainsi des blessures qui
auraient pu être évitées.
Toshiba s’en préoccupe!
L’industrie électronique grand public
s’engage à rendre le cinéma maison
agréable et sécuritaire.
Pour promouvoir la sécurité
des enfants et informer les
consommateurs et leurs familles
sur la sécurité des téléviseurs, la
Consumer Electronics Association
a créé une commission sur la
sécurité des appareils de cinéma
maison réunissant les fabricants
de téléviseurs et de meubles pour
appareils électroniques.
La sécurité avant
tout
Tous les meubles ne conviennent pas
dans tous les cas! Utilisez un meuble
suffisamment grand pour soutenir le poids de
votre téléviseur (et des autres appareils
électroniques).
Utilisez des équerres, brides et fixations pour ancrer le meuble
au mur (mais ne vissez rien directement au téléviseur).
Lisez attentivement et comprenez bien les autres instructions
ci-jointes relatives à l’utilisation correcte de ce produit.
Ne laissez pas les enfants grimper sur le meuble ou sur le téléviseur.
Évitez de placer sur votre téléviseur des articles (tels que
magnétoscope, télécommande ou jouet) qu’un enfant curieux
pourrait vouloir atteindre.
N’oubliez pas que les enfants peuvent s’énerver en regardant
la télévision et qu’ils pourraient renverser le téléviseur en le
poussant ou en le tirant vers eux.
Partagez avec votre famille et vos amis nos conseils de
sécurité concernant la présence de ce danger caché dans
votre maison. Merci!
Consignes de sécurité
AVERTISSEMENT
POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE
CHOC ÉLECTRIQUE, N’EXPOSER CET
APPAREIL NI À LA PLUIE NI À L’HUMIDITÉ.
Cher client,
Merci d’avoir acheté ce téléviseur TOSHIBA.
Ce manuel vous aidera à utiliser les possibilités
nombreuses et variées de votre nouveau téléviseur.
Avant d’allumer votre téléviseur, veuillez lire ce
manuel en entier. Gardez-le à portée de la main pour
pouvoir le consulter à l’avenir.
AVIS SUR LES EFFETS NÉFASTES
POTENTIELS POUR LE TUBE IMAGE
Si une image fixe (immobile) reste à l’écran du
téléviseur pendant des périodes prolongées, il est
possible que cette image se grave définitivement sur
le tube. Ce genre de dommage N’EST PAS
COUVERT PAR LA GARANTIE. Consulter l’alinéa
32 à la page 3.
Le symbole de la foudre dans le triangle indique que la
tension à l’intérieur du téléviseur peut être suffisamment
élevée pour provoquer un choc électrique. NE PAS
ESSAYER DE RÉPARER LE TÉLÉVISEUR SOI-MÊME.
Le point dexclamation dans le triangle est un symbole
qui précède des instructions de fonctionnement et
dentretien importantes.
AVERTISSEMENT
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVERTISSEMENT : POUR RÉDUIRE LES RISQUES
DE CHOC ÉLECTRIQUE, NE PAS RETIRER LE
PANNEAU ARRIÈRE. LE TÉLÉVISEUR NE
CONTIENT PAS DE PIÈCES RÉPARABLES PAR
L’UTILISATEUR. S’ADRESSER À UN CENTRE DE
SERVICE AGRÉÉ.
AVIS SUR LA POSSIBILITÉ D’INSTABILITÉ
DU MEUBLE DU TÉLÉVISEUR
DANGER : RISQUE DE BLESSURES
GRAVES OU MORTELLES!
Utiliser ce téléviseur uniquement avec le meuble de
téléviseur TOSHIBA recommandé dans la section
« Spécifications ». L’utilisation avec d’autres meubles
pourrait entraîner une instabilité risquant de
provoquer des blessures et même la mort.
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tél. 703-907-7600 Téléc. 703-907-7690
www.CE.org
La CEA parraine, organise et
gère le salon International CES
®
AVIS AUX INSTALLATEURS DE
CÂBLODISTRIBUTION AUX É.-U.
Cet avis rappelle, à l’attention des installateurs de
systèmes de câblodistribution, l’article 820-40 du NEC
(code électrique national des États-Unis) qui fournit des
conseils pour une mise à la terre correcte et qui préconise
en particulier que la mise à la terre du câble doit être reliée
au système de mise à la terre de l’immeuble, aussi près
que possible du point où le câble entre dans l’immeuble.
Pour de plus amples informations sur la mise à la terre de
l’antenne, consulter les alinéas 24 et 25 à la page 3.
3L70101A-F P.02-07 5/6/02, 11:41 AM2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Toshiba 20A42 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues