DE 3362
5019 100 75115
2.
Grease filters
3.
Lighting unit
4.
Pull-out steam deflector
REMOVING AND WASHING THE
GREASE FILTERS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Remove the grease filters:
b
- pull the handles upwards;
c
- then turn the filters outwards.
4.
After cleaning the grease filter refit in reverse
order, making sure the entire extraction
surface is covered.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Remove the grease filters(
b
,
c
).
4.
Remove the burnt-out bulb.
Use 40W max (E14) bulbs only.
5.
Refit the grease filters.
FITTING OR RENEWING
THE CARBON FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Remove the grease filters (
b
,
c
).
4.
If the carbon filter is already fitted and needs
renewing, press the release buttons (
e
) to fit
a new one.
5.
If the filter is not fitted:
d
- locate the carbon filter under the top
clips.
e
- secure in place with the bottom clips.
6.
Refit the grease filters.
THE CONTROL PANEL
A.
Speed selector switch.
B.
Light switch.
C.
Extraction speed indicator.
With light and speed selected, the hood switches
on when the steam deflector is opened, and
switches off again when the steam deflector is
closed.
2
1
4
2
3
3
O123
OI
O123
OI
A
B
C
a
Small amount of
steam and fumes
Medium amount of steam
and fumes
Large amount of steam and fumes
b
e
e
d
d
c
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI