Bosch NIT5665UC Le manuel du propriétaire

Use and Care Manual

Cooktop

NIT5065UC

() = cm

1,78

&



























3

Table of Contents

Use and care manual

Safety Definitions .......................................................... 4

IMPORTANT SAFETY INSTRUCTIONS ........................ 5

Fire Safety .............................................................................. 5

Cooking Safety ...................................................................... 5

Burn Prevention .................................................................... 6

Child Safety ........................................................................... 6

Cleaning Safety ..................................................................... 6

Cookware Safety .................................................................. 6

Proper Installation and Maintenance ................................ 7

Electromagnetic interference ............................................. 7

Cooling fan ............................................................................ 7

State of California Proposition 65 Warnings ................... 7

Causes of damage ......................................................... 8

Protecting the environment .......................................... 8

Energy-saving advice ........................................................... 8

Cooking by induction .................................................... 9

Advantages of induction cooking ...................................... 9

Proper cookware .................................................................. 9

Getting familiar with the appliance ............................ 10

Control panel ...................................................................... 10

The elements ...................................................................... 10

Residual heat indicator .................................................... 10

Operation ...................................................................... 11

Main power switch ............................................................ 11

Setting the cooktop ........................................................... 11

SpeedBoost function ........................................................ 12

Cook time ........................................................................... 13

The timer ............................................................................. 13

Child lock ............................................................................ 14

Clean Lock .......................................................................... 14

Automatic time limitation .................................................. 14

Basic settings ..................................................................... 14

Cleaning and Maintenance ......................................... 16

Daily Cleaning .................................................................... 16

Cleaning guidelines .......................................................... 16

Cleaning charts .................................................................. 17

Maintenance ....................................................................... 17

Service .......................................................................... 18

Troubleshooting ................................................................. 18

Normal operating noises of the cooktop ...................... 19

Technical service ............................................................... 19

STATEMENT OF LIMITED PRODUCT WARRANTY ... 20

What this Warranty Covers & Who it Applies to ......... 20

How Long the Warranty Lasts ........................................ 20

Repair/Replace as Your Exclusive Remedy ................ 20

Out of Warranty Product .................................................. 20

Warranty Exclusions ......................................................... 20

Produktinfo.

Additional information on products, accessories,

replacement parts and services can be found at

www.bosch-home.com and in the online shop

www.bosch-home.com/us/store

4

Safety Definitions

9 WARNING

This indicates that death or serious injuries may

occur as a result of non-observance of this warning.

9 CAUTION

This indicates that minor or moderate injuries may

occur as a result of non-observance of this warning.

NOTICE: This indicates that damage to the appliance or

property may occur as a result of non-compliance with

this advisory.

Note: This alerts you to important information and/or

tips.

5

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INS READ AND SAVE THESE INSTRUCTIONS

WARNING

When properly cared for, your new appliance has been

designed to be safe and reliable. Read all instructions

carefully before use. These precautions will reduce the

risk of burns, electric shock, fire, and injury to persons.

When using kitchen appliances, basic safety precautions

must be followed, including those in the following pages.

Examine the appliance after unpacking it. In the event of

transport damage, do not plug it in.

Fire Safety

Do not allow aluminum foil, plastic, paper or cloth to

come in contact with a hot surface element, burner or

grate. Do not allow pans to boil dry.

If the cooktop is near a window, forced air vent or fan, be

certain that flammable materials such as window

coverings do not blow over or near the burners or

elements. They could catch on fire.

Always have a working smoke detector near the kitchen.

Never leave the cooktop unattended when in use.

Boilovers cause smoking and greasy spillovers may

ignite.

WARNING

TO REDUCE THE RISK OF A GREASE FIRE:

a.

Never leave surface units unattended at high settings.

Boilovers cause smoking and greasy spillovers that

may ignite. Heat oils slowly on low or medium settings.

b.

Always turn hood ON when cooking at high heat or

when flambeing food (i.e. Crepes Suzette, Cherries

Jubilee, Peppercorn Beef Flambé).

c.

Clean ventilating fans frequently. Grease should not be

allowed to accumulate on fan or filter.

d.

Use proper pan size. Always use cookware

appropriate for the size of the surface element.

In the event that personal clothing or hair catches fire,

drop and roll immediately to extinguish flames.

Have an appropriate fire extinguisher available, nearby,

highly visible and easily accessible near the appliance.

Smother flames from food fires other than grease fires

with baking soda. Never use water on cooking fires.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS IN

THE EVENT OF A GREASE FIRE, OBSERVE THE

FOLLOWING:

a.

SMOTHER FLAMES with a close-fitting lid, cookie

sheet, or metal tray, then turn off the burner. BE

CAREFUL TO PREVENT BURNS. If the flames do not

go out immediately, EVACUATE AND CALL THE FIRE

DEPARTMENT.

b.

NEVER PICK UP A FLAMING PAN – You may be

burned.

c.

DO NOT USE WATER, including wet dishcloths or

towels – a violent steam explosion will result.

d.

Use an extinguisher ONLY if:

- You know you have a Class ABC extinguisher, and

you already know how to operate it.

- The fire is small and contained in the area where it

started.

- The fire department is being called.

- You can fight the fire with your back to an exit.

Whenever possible, do not operate the ventilation system

during a cooktop fire. However, do not reach through fire

to turn it off.

Cooking Safety

WARNING

Use this appliance only for its intended use as described

in this manual. NEVER use this appliance as a space

heater to heat or warm the room. Doing so may result in

overheating the appliance. Never use the appliance for

storage.

When using the timer, always supervise the cooktop and

do not allow anything to boil over or burn. Boilovers can

cause smoke and some foods and oils may catch fire if

left on high temperature settings.

Never use the appliance if liquids or foods have spilled

around the control panel. Always turn off the cooktop

and dry the control panel.

Injury and damage to the appliance may occur if control

elements are not used properly.

If the cooktop turns off automatically and can no longer

be operated, it may turn itself on unintentionally at a later

point. Switch off the circuit breaker in the fuse box.

Contact the after-sales service.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

6

Burn Prevention

DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS - Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not

touch, or let clothing, potholders, or other flammable

materials contact surface units or areas near units until

they have had sufficient time to cool. Among these areas

are the cooktop and areas facing the cooktop.

Do not heat or warm unopened food containers. Build-up

of pressure may cause the container to burst and cause

injury.

Always use dry potholders. Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

Always turn hood ON when cooking at high heat or when

flambeing food (i.e. Crêpes Suzette, Cherries Jubilee,

Peppercorn Beef Flambe).

Use high heat settings on the cooktop only when

necessary. To avoid bubbling and splattering, heat oil

slowly on no more than a low-medium setting. Hot oil is

capable of causing extreme burns and injury.

Never move a pan of hot oil, especially a deep fat fryer.

Wait until it is cool.

Secure all loose garments, etc. before beginning. Tie

long hair so that it does not hang loose, and do not wear

loose fitting clothing or hanging garments, such as ties,

scarves, jewelry, or dangling sleeves.

WARNING

RISK OF BURNS

Metallic objects become hot very quickly on the cooktop.

Never set down metallic objects, such as knives, forks,

spoons and lids on the cooktop.

WARNING

RISK OF BURNS

The pan detection may potentially fail to turn off the

cooking zone due to spilled food or objects placed upon

the cooktop. After each use, turn off the cooktop using

the main switch.

If the display does not work when a cooking area is

heating up, disconnect the circuit breaker from the fuse

box. Contact an authorized servicer.

Child Safety

When children become old enough to use the appliance,

it is the legal responsibility of the parents or legal

guardians to ensure that they are instructed in safe

practices by qualified persons.

Do not allow anyone to climb, stand, lean, sit, or hang on

any part of an appliance, especially a door, warming

drawer, or storage drawer. This can damage the

appliance, and the unit may tip over, potentially causing

severe injury.

Do not allow children to use this appliance unless closely

supervised by an adult. Children and pets should not be

left alone or unattended in the area where the appliance

is in use. They should never be allowed to play in its

vicinity, whether or not the appliance is in use.

CAUTION

Items of interest to children should not be stored in an

appliance, in cabinets above an appliance or on the

backsplash. Children climbing on an appliance to reach

items could be seriously injured.

Cleaning Safety

Do not clean the appliance while it is still hot. Some

cleaners produce noxious fumes when applied to a hot

surface. Wet clothes and sponges can cause burns from

steam.

Do not use steam cleaners to clean the appliance.

Cookware Safety

Hold the handle of the pan when stirring or turning food.

This helps prevent spills and movement of the pan.

Use Proper Pan Size.

The use of undersized cookware will expose a portion of

the heating element or burner to direct contact and may

result in ignition of clothing. Select cookware having flat

bottoms large enough to cover the surface heating unit.

This appliance is equipped with one or more surface

units of different size. Proper relationship of cookware to

heating element or burner will also improve efficiency.

Cookware not approved for use with ceramic cooktops

may break with sudden temperature changes. Use only

pans that are appropriate for ceramic cooktops.

Always position handles of utensils inward so they do not

extend over adjacent work areas, burners, or the edge of

the cooktop. This reduces the risk of fires, spills and

burns.

WARNING

RISK OF INJURY

When cooking with a bain-marie, the cooktop and

cooking vessel may crack due to overheating. The

cooking vessel in the bain-marie must not come in direct

contact with the bottom of the pot filled with water. Use

only heat-resistant cookware.

WARNING

DANGER OF INJURY

Cookware may jump upward due to fluid trapped

between the cookware bottom and cooking zone. Always

keep cooking zone and cookware bottom dry.

7

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Proper Installation and Maintenance

Have the installer show you the location of the circuit

breaker or fuse. Mark it for easy reference.

This appliance must be properly installed and grounded

by a qualified technician. Connect only to properly

grounded outlet. Refer to Installation Instructions for

details.

This appliance is intended for normal family household

use only. It is not approved for outdoor use. See the

Warranty. If you have any questions, contact the

manufacturer.

Do not store or use corrosive chemicals, vapors,

flammables or nonfood products on or near this

appliance. It is specifically designed for use when

heating or cooking food. The use of corrosive chemicals

in heating or cleaning will damage the appliance and

could result in injury.

Do not operate this appliance if it is not working properly,

or if it has been damaged. Contact an authorized

servicer.

Do not cook on a broken cooktop. Cleaning solutions

and spillovers may create a risk of electric shock.

Do not repair or replace any part of the appliance unless

specifically recommended in this manual. Refer all

servicing to a factory authorized service center.

To avoid electrical shock hazard, before servicing the

appliance, switch power off at the service panel and lock

the panel to prevent the power from being switched on

accidentally.

Electromagnetic interference

WARNING

This induction cooktop generates and uses ISM

frequency energy that heats cookware by using an

electromagnetic field. It has been tested and complies

with Part 18 of the FCC Rules for ISM equipment. This

induction cooktop meets the FCC requirements to

minimize interference with other devices in residential

installation. Induction cooktops may cause interference

with television or radio reception. If interference occurs,

the user should try to correctthe interference by:

▯ Relocating the receiving antenna of the radio or

television.

▯ Increasing the distance between the cooktop and the

receiver.

▯ Connecting the receiver into an outlet different than the

receiver.

It is the user’s responsibility to correct any interference.

CAUTION

Persons with a pacemaker or similar medical device

should exercise caution when standing near an induction

cooktop while it is in use. Consult your doctor or the

manufacturer of the pacemaker or similar medical device

for additional information about its effects with

electromagnetic fields from an induction cooktop.

Cooling fan

The cooktop is equipped with a cooling fan on its

underside. Should the cooktop lie above a drawer, there

must be no objects or paper in it. They may be sucked in

and compromise the cooling of the appliance or damage

the fan.

There must be a minimum distance of ¾" (20mm)

between the content of the drawer and the fan input.

State of California Proposition 65

Warnings

WARNING

This product contains chemicals known to the State of

California to cause cancer, birth defects or other

reproductive harm.

8

Causes of damage

▯ Scratches on glass ceramic surface: Cookware with

rough bottoms will scratch the glass ceramic surface.

▯ Salt, sugar and sand: Salt, sugar or grains of sand will

scratch the glass ceramic surface. Never use the

cooktop as a working surface or for setting things

down.

▯ Overheated cookware: Avoid heating pots or pans

that are empty.

▯ Hot cookware: Never set down hot pans and pots on

the control panel or frame. This may cause damage.

▯ Hard and sharp objects: Hard or sharp objects falling

on the cooktop may damage it.

▯ Boiled-over food: Sugar and products containing

sugar may damage the cooktop. Immediately eliminate

spills of these products with a glass scraper.

▯ Foils and plastics: Aluminum foil and plastic will melt

on the hot cooking zones. Stove protective film isn't

suitable for your cooktop.

▯ Unsuitable cleaning agent: Shimmering metallic

discolorations on the glass ceramic surface result from

the use of inappropriate cleaning agents and abrasion

from cookware.

Protecting the environment

Energy-saving advice

▯ Always place a fitting lid on cookware. Cooking with

an uncovered pan will result in a four-fold increase in

energy use. Use a glass lid to provide visibility and

avoid having to lift the lid.

▯ Use cookware equipped with a solid, flat bottom.

Curved pan bases increase energy consumption.

▯ The diameter of the pan base must match the size of

the element. If not, energy may be wasted. Note: The

manufacturer normally indicates the pan's upper

diameter. This is normally greater than the diameter of

the pan's base.

▯ Choose cookware of a size suited to the amount of

food you are going to cook. A large pan that is only

half full will use a lot of energy.

▯ Use a small amount of water when cooking. This

saves energy, and vegetables retain a larger

percentage of their vitamins and minerals.

▯ Select a lower power level.

9

Cooking by induction

Advantages of induction cooking

Induction cooking represents a radical change from the

traditional method of heating; the heat is generated

directly in the pan. It therefore offers a number of

advantages:

▯ Greater speed in cooking and frying; as the pan is

heated directly.

▯ Energy is saved.

▯ Greater convenience in care and cleaning. Foods that

have spilled on the cooktop surface do not burn as

quickly.

▯ Heat and safety control; the cooktop supplies or cuts

off power immediately when the controls are set. The

induction cooktop stops supplying heat if the pan is

removed without turning off the power first.

Proper cookware

Ferromagnetic pans

Only ferromagnetic pans are suitable for induction

cooking, these can be made from:

▯ enamelled steel

▯ cast iron

▯ special stainless steel utensils for induction cooking

Check that the bases of your pans are attracted by a

magnet to find out if they are suitable.

Other suitable cookware for induction

There are other types of cookware with a base not

entirely ferromagnetic that are made for induction

cooking use.

Unsuitable pans

Never use pans made of:

▯ thin normal steel

▯ glass

▯ clay

▯ copper

▯ aluminum

Characteristics of the pan base

The characteristics of the pan base can influence the

evenness of the cooking results. Pans made from

materials which help diffuse heat, such as stainless steel

sandwich pans, distribute heat uniformly, saving time and

energy.

No pan or improper size

If no pan is placed on the selected element, or if it is

made of unsuitable material or is not the correct size, the

power level displayed on the element indicator will flash.

Place a suitable pan on the element to stop the flashing.

If you take longer than 90 seconds to place a suitable

pan on the element, it will automatically turn off.

Empty pans or pans with a thin base

Do not heat up empty pans, or use pans with a thin base.

The cooktop is equipped with an internal safety system.

However, an empty pan may heat up so quickly that the

"automatic switch off" function may not have time to react

and the pan may reach very high temperatures. The pan

base could melt and damage the cooktop glass. In this

case, do not touch the pan and switch the cooktop off. If

the cooktop fails to work after it has cooled down, please

contact the technical service.

Pan detection

Each element has a minimum limit for detecting pans,

which varies depending on the material of the pan you

are using. You should therefore use the element that best

matches the diameter of your pan.

Automatic detection on double or triple cooking

elements

These elements can detect different pan sizes.

Depending on the material and properties of the pan, the

element will adapt automatically, and will turn on single

zone or the entire element, supplying the proper power to

obtain good cooking results.

When using large cookware

on a smaller ferromagnetic

element, only the

ferromagnetic element heats

up, so heat might not be

uniformly distributed.

Cookware with aluminum on

the base reduce the ferro-

magnetic zone, so less

heat may be supplied or

problems with detection

might occur.

For good cooking results, the

diameter of the cookware's

ferromagnetic area should

match the size of the ele-

ment. If cookware is not

detected on an element, try it

on the next smaller element.

10

Getting familiar with the appliance

In this section we describe the control panel, elements

and displays.

These instructions apply to more than one cooktop, your

appliance might vary slightly.

Page 2 contains a list of models and dimensions.

Control panel

Touch control zone

When you touch a symbol, the corresponding function

will be activated.

NOTICE: Always keep the touch control zones clean

and dry. Moisture and dirt can affect proper functioning.

The elements

Residual heat indicator

The cooktop is equipped with a residual heat indicator

for each element. Avoid touching the indicated elements.

Even when turned off, the indicator •/œ will stay lit while

the cooktop is hot.

If the pan is removed but the element is not turned off,

the indicator •/œ and the selected power level will flash

alternately.



Display icons

>

Cleaning protection on

D

Child lock on

U

Kitchen timer on

‰‰

Timer value

q

Timer function

¶

Cooking time active for lit element

‰.‰ Power level ‚-Š

Ready ‹

Residual heat •/œ

SpeedBoost function ›

Touch keys

On/Off Main power switch

CleanLock/

ChildLock

Cleaning protection / Child safety

Timer Time programming functions

Boost SpeedBoost function

$

Select element

0 - 9 Set temperature level Frying level Timer

Frying program

Element Turning on and off

$

Single element Always use cookware of a suitable size.

ð

Dual element This element is turned on automatically when using cookware with a

base the same size as the outer zone.

Use only cookware suitable for induction cooking; see the section on suitable cookware.

11

Operation

Main power switch

Use the main switch to turn on the electronic circuitry for

the control panel. The cooktop is now ready to use.

Turning the cooktop on

Touch the On/Off touch key. A beep will sound.

The __ indicator located on top of the On/Off touch key

lights up.

Turning the cooktop off

Touch the On/Off touch key. The __ indicator goes out.

The cooktop is switched off. The residual heat indicators

will remain on until the elements have cooled off

sufficiently.

Note: The cooktop switches off automatically when all

the elements have been switched off for more than 20

seconds.

The residual heat indicator remains lit until the elements

have cooled down sufficiently.

•/œ is displayed next to

the corresponding element symbol.

Setting the cooktop

This section will show you how to set the elements. The

table contains details on the heat settings for a variety of

dishes.

Setting the element

Select the desired heat level using the symbols 1 to 9.

Heat level 1 = minimum power

Heat level 9 = maximum power

Each heat level has an intermediate level. This level is

marked with the Û symbol in the touch control zone.

Selecting the heat level

The cooktop must be turned on.

1.

Touch the $ touch key for the corresponding element.

The

‹.‹ indicator lights up.

2.

Touch the number key for the desired heat level.

Changing the heat level

Select the element and touch the number key for the

desired heat level. To select an intermediate level, touch

the Û symbol located between the heat level numbers.

Turning off the element

Select the element and set the heat level to 0. The

element is turned off and the residual heat indicator is

displayed.

Note: The selected power level will flash if no pan is

placed on the induction element. After a certain time, the

element turns itself off.

Settings table

The following table provides some examples. Cooking

times may vary depending on the type of food, its weight

and quality. Deviations are therefore possible.

Note: During cooking, stews or liquid meals such as

soups, sauces or drinks can heat up too quickly

unnoticed and overflow or spatter. For this reason we

recommend that you stir continuously, gradually heating

the food at a suitable power level.

 

Power levels

Melting

chocolate 1.5 - 2.0

butter 1.0 - 2.0

12

SpeedBoost function

The SpeedBoost function can be used to heat large

amounts of water faster than by using heat level Š.

Limitation on use

This function is available on all elements, provided that

no other element in the same group is operating, (see

picture). If this is not the case, the › and Š symbols will

flash on the selected element display; then it will

automatically set the power level Š.

Turning on SpeedBoost

1.

Select an element.

2.

Touch Boost. The letter › will light up in the element

display. The function has been turned on.

Turning off SpeedBoost

1.

Select an element.

2.

Touch the Boost touch key. The letter › will no longer

be displayed and the element will return to heat level

Š. The SpeedBoost function has been deactivated.

Note: In certain circumstances, the function may be

deactivated automatically to protect the internal

electronic components of the cooktop.

Heating

frozen vegetables, e.g. spinach 2.5 - 3.5

broth 7.0 - 8.0

thick soup 1.5 - 2.5

milk** 1.0 - 2.0

Simmering

delicate sauce e.g. Béchamel sauce 4.0 - 5.0

spaghetti sauce 2.0 - 3.0

pot roast 4.0 - 5.0

fish** 4.0 - 5.0

Cooking

rice (with double amount of water) 2.0 - 3.0

potatoes bolied in thier skins (with 1-2 cups of water) 4.0 - 5.0

boiled potatoes (with 1-2 cups of water) 4.0 - 5.0

fresh vegetables (with 1-2 cups of water) 2.0 - 3.5

frozen vegetables (with 1-2 cups of water) 3.5 - 4.5

pasta (with 2-4 qt. water)* 6.0 - 7.0

pudding** 1.0 - 2.0

cereals 2.0 - 3.0

Frying

pork chop 5.5 - 6.5

chicken breast 5.0 - 6.0

bacon 6.0 - 7.0

eggs 5.0 - 6.0

fish 5.0 - 6.0

pancakes 6.0 - 7.0

Deep fat frying** (in 1-2 qt. oil)

deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving) 8.0 - 9.0

other, e.g. doughnuts (0.5 lb per serving) 4.5 - 5.5

* ongoing cooking without lid

** without lid

Power levels

*URXS



















*URXS

*URXS

*URXS

13

Cook time

You can use the timer function to set a cook time for any

element. The element will turn off automatically once the

set time has elapsed.

9 CAUTION

▯ When using the timer, always keep an eye on the

cooktop and do not allow anything to boil over or

burn. Boilovers can cause smoke and foods and

oils may catch on fire if left on high temperature

settings.

▯ This function should not be used for long periods

of time, especially at high heat settings.

▯ Make sure the cooktop is turned off with the main

power switch after each use.

Setting the cook time

1.

Select the desired element and power level.

2.

Touch the Timer key. The ‹‹, min and __ indicators

light up on the timer display. The indicator for the

desired element lights up.

3.

Within the next 10 seconds, set the required time

using the number keys 1 to 9.

After a few seconds, the timer will start to count down.

The last programmed cook time will appear in the

display.

Once the cook time has elapsed

The element turnes off once the set cook time has

elapsed. You will hear a beep. The indicator ‹.‹ appears

in the element display and the timer display shows ‹‹.

Once you touch the Timer key, the indicators and the

beep are turned off.

Changing cook time

Select the element and touch the Timer key twice. Set

the new cook time using the number keys 0 to 9.

Cancelling cook time

Select the desired element and touch the Timer symbol

twice. The min, __ and

r indicators light up. Then

select 0 from the number keys until ‹‹ is displayed.

Automatic timer

With this function you may select a cook time for all

elements. Once an element is turned on, the selected

time will begin to count down. The element will

automatically turn off when the cook time has elapsed.

Instructions on activating the automatic timer are found in

the chapter "Basic settings".

Note: The cook time can be changed or cancelled for

any element:

Touch the Timer key several times until the $ indicator

of the required element lights up. Adjust the cook time

with touch keys 1 to 9 or deactivate with 0.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off an element.

Setting the kitchen timer

1.

Touch the Timer key. ‹‹ appears in the timer display.

The __, min and U indicators light up.

2.

Set the required time using the number keys 0 to 9.

After a few seconds, the __ indicator goes out and the

programmed time starts to count down.

Once the time has elapsed

A beep sounds. ‹‹ and U indicators light up. Touch the

Timer key. The indicators go out and the beep stops.

Changing the time

Touch the Timer key. The __ and U indicators light up.

Change the time using the number keys 0 to 9.

Clearing the time

Touch the Timer key. The __ and U indicators light up.

Touch the 0 key until ‹‹ appears on the timer display.

The U indicator goes out.

Notes

▯ If the set time is not displayed, touch the Timer key

several times until the U indicator lights up on the

timer display.

▯ The timer will be deactivated after a power outage.

▯ The automatic off function for an element and the timer

function can both be operated simultaneously.

14

Child lock

You can use the child lock to prevent children from

accidentally turning the cooktop on.

Turning the child lock on

The cooktop must be turned off.

Touch Clean Lock/Child Lock until a beep sounds and

the

D indicator lights up. The cooktop is now locked.

After some time, the D indicator will go out.

Turning the child lock off

Touch Clean Lock/Child Lock until a beep sounds and

the D indicator turns off. The child lock is now

deactivated. The cooktop can be switched on.

9 CAUTION

The child lock may be accidentally turned on and off

due to:

▯ water spilled during cleaning

▯ food that has overflowed

▯ objects being placed on the

Clean Lock/Child Lock touch key.

Automatic child lock

With this function, the child lock is automatically activated

whenever you switch off the cooktop.

Turning on and off

See "Basic settings" section.

Clean Lock

Cleaning the control panel while the cooktop is on may

change the settings.

In order to avoid this the cooktop has a Clean Lock

function. Touch Clean Lock/Child Lock. The > indicator

appears. The control panel is locked for approximately

35 seconds. You can now clean the surface of the

control panel without risk of changing the settings.

After the time has elapsed a beep will sound. The Clean

Lock is deactivated.

The Clean Lock function does not affect the main switch.

You can turn off the cooktop at any time.

Automatic time limitation

If the element is used for prolonged periods of time

without changes in the settings being made, the

automatic time limitation function is triggered.

The element stops heating. ”‰ and the residual heat

indicator •/œ flash alternately in the display.

The indicator goes out when any symbol is pressed. The

element can now be reset.

When the automatic time limitation is activated depends

on the selected heat level (from 1 to 10 hours).

Basic settings

The device has various basic settings. These settings

may be adapted to the user's individual needs.

Display Function

™‚

Automatic child lock

‹ Off*

‚ On

™ƒ

Sound signals

‹ Confirmation beep and error signal off

‚ Only confirmation beep off

ƒ All signals on*

™†

Automatic timer

‹ Off*

‚-ŠŠ Automatic shut-off time

™‡

Duration of the timer end signal

‚ 10 seconds*

ƒ 30 seconds

„ 1 minute

*Factory settings

15

Changing the basic settings

The cooktop should be turned off.

1.

Turn on the cooktop with the main switch.

2.

Within the next 10 seconds, touch the Timer key until

you hear a sound signal. ™‚ lights up on the left side

and ‹ on the right side of the display.

3.

Touch the Timer key until the indicator for the required

function is displayed.

4.

Select the required setting using the number keys. The

new setting will be displayed in the element display on

the upper right-hand side.

5.

Touch the Timer key again for 4 seconds, until you

hear a sound signal. The settings have been correctly

stored.

Leaving the basic settings

Turn off the cooktop with the main switch.

™ˆ

Power Management function

‹ = Off*

‚ = 1,000 W. minimum power

‚.= 1,500 W

ƒ = 2,000 W

etc.

Š or Š. = maximum power of the element

™Š

Element selection time

‹ Unlimited: the last programmed element remains selected*

‚ Limited: The element will only remain selected for 10 seconds

™‹

Restoring default cooktop settings

‹ Customized settings*

‚ Return to factory settings

Display Function

*Factory settings

16

Cleaning and Maintenance

Daily Cleaning

Note: Recommended cleaners indicate a type of cleaner

and do not constitute an endorsement of a specific

brand.

Glass ceramic cooktop

9 CAUTION

Do not use any kind of cleaner on the glass while

the surface is hot, use only the razor blade scraper.

The resulting fumes can be hazardous to your

health. Heating the cleaner can chemically attack

and damage the surface.

Clean the surface when it is completely cool with the

following exception: remove dry sugar, sugar syrup,

tomato products and milk immediately with the razor

blade scraper (see special care chart).

Wipe off spatters with a clean, damp sponge or a paper

towel. Rinse and dry. Use white vinegar if smudge

remains; rinse.

Apply a small amount of the glass ceramic cooktop

cleaner. When dry, buff surface with a clean paper towel

or cloth.

Cleaning guidelines

When using a cleaner, use only a small amount; apply to

a clean paper towel or cloth. Wipe on the surface and

buff with a clean dry towel.

For best results, use cleaners such as glass ceramic

cooktop cleaner, BonAmi®, Soft Scrub®

(without bleach), and white vinegar.

Avoid these cleaners

▯ Glass cleaners which contain ammonia or chlorine

bleach. These ingredients may damage or

permanently stain the cooktop.

▯ Caustic cleaners - cleaners such as Easy Off® may

stain the cooktop surface.

▯ Abrasive cleaners.

▯ Metal scouring pads and scrub sponges such as

Scotch Brite® can scratch and/or leave metal marks.

▯ Soap-filled scouring pads such as SOS® can scratch

the surface.

▯ Powdery cleaners containing chlorine bleach can

permanently stain the cooktop.

▯ Flammable cleaners such as lighter fluid or WD-40.

17

Cleaning charts

Maintenance

This appliance requires no maintenance other than daily

cleaning. For best results, apply cooktop cleaning cream

daily.

Type of Soil Possible Solution

Dry sugar, sugar syrup, milk or tomato spills. Melted

plastic film or foil. All these items REQUIRE IMMEDIATE

REMOVAL. Failure to remove these immediatly can

permanently damage the surface.

Remove these types of spills while the surface is hot

using the razor blade scraper. Use a new, sharp razor in

the scraper. Remove pan and turn off the element.

Wearing an oven mitt, hold scraper at 30° angle, using

care not to gouge or scratch the glass. Push soil off the

heated area. After the surface has cooled, remove the

residue and apply the glass ceramic cooktop cleaner.

9 WARNING

RISK OF INJURY

The blade is extremely sharp. Risk of cuts. Protect

the blade when not in use. Replace the blade

immediately when any imperfections are found.

Follow manufacturer’s instructions.

Burned-on food soil, dark streaks, and specks Soften by laying a damp paper towel or sponge on top of

soil for 30 minutes. Use a plastic scrubber and glass

ceramic cooktop cleaner or use the razor blade scraper.

Rinse and dry.

Greasy spatters Use a soapy sponge or cloth to remove grease; rinse

thoroughly and dry. Apply glass ceramic cooktop

cleaner.

Metal marks: Iridescent stain Pans with aluminum, copper or stainless steel bases may

leave marks. Treat immediately after surface has cooled

with glass ceramic cooktop cleaner. If this does not

remove the marks, try a mild abrasive (Bon Ami®, Soft

Scrub® without bleach) with a damp paper towel. Rinse

and reapply glass ceramic cooktop cleaner. Failure to

remove metal marks before the next heating makes

removal very difficult.

Hard water spots:

Hot cooking liquids dripped on surface

Minerals in some water can be transferred onto the

surface and cause stains. Use undiluted white vinegar,

rinse and dry. Recondition with glass ceramic cooktop

cleaner. Remove boilovers and stains before using the

cooktop again.

Surface scratches:

Small scratches are common and do not affect cooking.

They become smoother and less noticeable with daily use

of the glass ceramic cooktop cleaner.

Apply glass ceramic cooktop cleaner before using to

remove sand-like grains and grit such as salt and

seasoning. Scratches can be reduced by using pans with

bases that are smooth, clean, and dry before use. Use

recommended glass ceramic cooktop cleaner daily.

NOTICE: Diamond rings may scratch the surface.

18

Service

Troubleshooting

If you encounter a problem, it often will merely be

something minor. Before you call customer service,

consider the suggestions and instructions below:

9 CAUTION

Repairs should only be done by a trained servicer.

Improper repair of your appliance may result in risk

of severe physical injury or death.

--------

Fault Possible cause Measure

Cooktop is not working The electric power supply has been

interrupted.

Use other electrical appliances to check if there has

been a power outage. Check to see if there is a

problem with the circuit breaker for the electrical

installation.

The appliance has not been

correctly connected following the

connection diagram.

Make sure that the appliance has been connected

correctly.

Electronic system malfunction. Contact the Technical Assistance Service.

“ is flashing on the

element display

The touch control zone is wet, very

dirty, food has boiled over, or an

object is lying on top of the touch

control zone.

Clean the touch control zone, or remove the object.

Lightly touch the corresponding touch key. The

flashing should stop.

“ flashes on all

element displays. An

accoustic signal

sounds

The main switch has been activated

continuously for more than

5 seconds.

Press the power key again. Reset the cooktop.

The cooktop turns off

by itself

The main switch has been touched

unintentionally.

Press the main switch again. Reset the cooktop.

The display flashes

(no power) when you

place a pan on an

induction element

The pan is not ferromagnetic Check the bottom of the pan with a magnet.

The diameter of the pan is to small. Use a pan with an appropriate diameter for the

element.

If the display still does not light up when you turn the

element off and on again, disconnect the appliance

at the circuit breaker. Wait 20 seconds and then

reconnect it.

The SpeedBoost func-

tion display flashes and

then turnes off

The element is too hot. The SpeedBoost function operates the element with

the highest possible power. During long cooking

times, it is possible that the function will turn the

element off to protect the cooktop from overheating.

You can continue to use the cooktop if the display is

not flashing.

Display “ and numbers

A fault in the electronic system has

occurred.

Turn the appliance off and back on at the fuse or

circuit breaker. If the same fault occurs again,

disconnect the appliance and call

Technical Assistance Service.

Display ” and numbers

A fault has been detected. The following table of error messages lists actions

you can take to correct the problem

19

Error messages

Notes

▯ Glass ceramic may have uneven areas on the surface

due to the nature of the material itself. Because of the

mirror-like finish on the cooking surface, even

extremely small bubbles less than 1 mm in diameter

may be visible. These bubbles will not have any

adverse effect on the operation of the cooktop nor on

the durability of the glass ceramic cooking surface.

▯ Depending on the countertop that is present in the

kitchen, an uneven gap between the cooktop unit and

the countertop can occur. For this reason, a flexible

seal is provided around the entire cooktop unit.

Normal operating noises of the cooktop

Induction technology is based on the creation of

electromagnetic fields. They may generate heat directly

on the bottom of the cookware. Pots and pans may

cause a variety of noises or vibrations depending on the

way they've been manufactured. These noises are

described as follows:

Low humming (like a transformer)

This noise is produced when cooking at a high heat

level. It is based on the amount of energy transferred

from the cooktop to the cookware. The noise ceases or

quiets down when the heat level is reduced.

Quiet whistling

This noise is produced when the cooking vessel is

empty. It ceases once water or food is placed in the

vessel.

Crackling

This noise occurs with cookware comprised of various

materials layered one upon the other. It's caused by the

vibrations of the surfaces where different materials meet.

The noise occurs on the cookware and can vary

depending on the amount and method of preparation of

the food.

Loud whistling

This noise occurs with cookware comprised of different

materials layered one upon the other, and when they are

additionally used at maximum output and also on two

cooking zones. The noise ceases or quiets down when

the heat level is reduced.

Fan noises

For proper operation of the electronic system, it is

necessary to regulate the temperature of the cooktop.

For this purpose, the cooktop is equipped with a cooling

fan, which is activated to reduce and regulate the

temperature of the electronic system. The fan may also

continue to run after the appliance is turned off if the

detected temperature of the cooktop is still too hot after

turning it off.

The noises described are a normal element of the

described induction technology and shouldn't be

regarded as defects.

Technical service

Contact our Technical Service Department if your

appliance needs repair. Our central Customer Service

Center (see below) will also be happy to supply you with

details on a center close to you.

E number and FD number:

When you contact our service, please have the Model(E)

number and the FD number for your appliance available.

You can find the identification plate with these numbers

on the underside of the appliance and in the appliance

booklet.

Questions? Please contact us. We look forward to

hearing from you!

”ƒ

The element is too hot and has

turned off.

Remove the pans from the elements.

”ƒ disappears

when you press the display, if the element has

cooled down sufficiently. Wait a few minutes until the

element has cooled down a bit. If

”ƒ appears again

after the element is turned back on, the cooktop is

still too hot. Turn off the elements and allow them to

cool further.

”…

The touch control zone is too hot. Make sure that cookware is properly positioned on

the element, and no hot objects are in contact with

the touch control zone. Wait a few minutes until the

touch control zone has cooled down. If ”… appears

after you turn on the appliance, call

Technical Assistance Service.

”‰

The element was in continuous use

for too long.

The automatic time limitation has been activated.

Touch any key. You can now turn on the heating

element immediately.

0DLQ6WUHHW6XLWH

,UYLQH&$

ZZZERVFKKRPHFRP



20

STATEMENT OF LIMITED PRODUCT WARRANTY

What this Warranty Covers & Who it

Applies to

The limited warranty provided by BSH Home Appliances

Corporations (“BSH“) in this Statement of Limited

Product Warranty applies only to the Bosch appliance

(“Product“) sold to you, the first using purchaser,

provided that the Product was purchased:

▯ For your normal, household (non-commercial) use,

and has in fact at all times only been used for normal

household purposes.

▯ New at retail (not a display, "as is", or previously

returned model), and not for resale, or commercial

use.

▯ Within the United States or Canada, and has at all

times remained within the country of original purchase.

The warranties stated herein apply only to the first

purchaser of the Product and are not transferable.

BSH reserves the right to request proof of purchase at

the time any warranty claim is submitted to confirm that

the Product falls within the scope of this limited product

warranty.

Please make sure to return your registration card; while

not necessary to effectuate warranty coverage, it is the

best way for BSH to notify you in the unlikely event of a

safety notice or product recall.

How Long the Warranty Lasts

BSH warrants that the Product is free from defects in

materials and workmanship for a period of three hundred

sixty-five (365) days from the date of purchase. The

foregoing timeline begins to run upon the date of

purchase, and shall not be stalled, tolled, extended, or

suspended, for any reason whatsoever.

This Product is also warranted to be free from cosmetic

defects in material and workmanship (such as scratches

of stainless steel, paint/porcelain blemishes, chip, dents,

or other damage to the finish of the Product), for a period

of thirty (30) days from the date of purchase or closing

date for new construction. This cosmetic warranty

excludes slight color variations due to inherent

differences in painted and porcelain parts, as well as

differences caused by kitchen lighting, product location,

or other similar factors. This cosmetic warranty

specifically excludes any display, floor, “As Is”, or “B”

stock appliances.

Repair/Replace as Your Exclusive Remedy

During this warranty period, BSH or one of its authorized

service providers will repair your Product without charge

to you (subject to certain limitations stated herein) if your

Product proves to have been manufactured with a defect

in materials or workmanship. If reasonable attempts to

repair the Product have been made without success,

then BSH will replace your Product (upgraded models

may be available to you, in BSH’s sole discretion, for an

additional charge). All removed parts and components

shall become the property of BSH at its sole option. All

replaced and/or repaired parts shall assume the identity

of the original part for purposes of this warranty and this

warranty shall not be extended with respect to such

parts. BSH's sole liability and responsibility hereunder is

to repair manufacturer-defective Product only, using a

BSH-authorized service provider during normal business

hours. For safety and property damage concerns, BSH

highly recommends that you do not attempt to repair the

Product yourself, or use an un-authorized servicer; BSH

will have no responsibility or liability for repairs or work

performed by a non-authorized servicer. If you choose to

have someone other than an authorized service provider

work on your Product, THIS WARRANTY WILL

AUTOMATICALLY BECOME NULL AND VOID. Authorized

service providers are those persons or companies that

have been specially trained on BSH products, and who

possess, in BSH's opinion, a superior reputation for

customer service and technical ability (note that they are

independent entities and are not agents, partners,

affiliates or representatives of BSH). Notwithstanding the

foregoing, BSH will not incur any liability, or have

responsibility, for the Product if it is located in a remote

area (more than 100 miles from an authorized service

provider) or is reasonably inaccessible, hazardous,

threatening, or treacherous locale, surroundings, or

environment; in any such event, if you request, BSH

would still pay for labor and parts and ship the parts to

the nearest authorized service provider, but you would

still be fully liable and responsible for any travel time or

other special charges by the service company, assuming

they agree to make the service call.

Out of Warranty Product

BSH is under no obligation, at law or otherwise, to

provide you with any concessions, including repairs, pro-

rates, or Product replacement, once this warranty has

expired.

Warranty Exclusions

The warranty coverage described herein excludes all

defects or damage that are not the direct fault of BSH,

including without limitation, one or more of the following:

▯ Use of the Product in anything other than its normal,

customary and intended manner (including without

limitation, any form of commercial use, use or storage

of an indoor product outdoors, use of the Product in

conjunction with air or water-going vessels).

▯ Any party's willful misconduct, negligence, misuse,

abuse, accidents, neglect, improper operation, failure

to maintain, improper or negligent installation,

tampering, failure to follow operating instructions,

mishandling, unauthorized service (including self-

performed "fixing" or exploration of the appliance's

internal workings).

▯ Adjustment, alteration or modification of any kind.

▯ A failure to comply with any applicable state, local,

city, or county electrical, plumbing and/or building

codes, regulations, or laws, including failure to install

the product in strict conformity with local fire and

building codes and regulations.

La page est en cours de chargement...

Bosch NIT5665UC Le manuel du propriétaire

Ce manuel convient également à

Bosch NIT5665UC Le manuel du propriétaire

dans d''autres langues

Documents connexes