Extreme Networks AP560i Guide de référence

Marque: Extreme Networks

Modèle: AP560i

Taper: Guide de référence

ExtremeWirelessTM

Access Point

Quick Reference

AP560i

Scan to Download the

ExtremeCloud IQ Companion Mobile Application

Commission, monitor, and troubleshoot devices easily with ExtremeCloud IQ

Companion Mobile Application (supported on iOS and Android).

Use your mobile device camera to scan the serial number, capture installation

images, assign or change device location, and network policy. The

ExtremeCloud IQ Companion Mobile Application enables you to access the

device CLI for troubleshooting and view device and client status.

ExtremeCloud IQ Companion ExtremeCloud IQ Companion

iOS Mobile Application Android Mobile Application

Scan for Product Support Details

ExtremeCloud IQ Companion Documentation

Mobile Application Onboarding

Notice

Legal Notices

Extreme Networks, Inc. reserves the right to make changes in specifications

and other information contained in this document and its website without

prior notice. The reader should in all cases consult representatives of Extreme

Networks to determine whether any such changes have been made.

The hardware, firmware, software or any specifications described or referred

to in this document are subject to change without notice.

Trademarks

Extreme Networks and the Extreme Networks logo are trademarks or

registered trademarks of Extreme Networks, Inc. in the United States and/or

other countries.

All other names (including any product names) mentioned in this document

are the property of their respective owners and may be trademarks or

registered trademarks of their respective companies/owners.

For additional information on Extreme Networks trademarks, please see:

www.extremenetworks.com/company/legal/trademarks/

Documentation, Installation Videos, and Support

For product support, including Documentation and Installation Videos, visit:

www.extremenetworks.com/documentation

ExtremeWireless 802.11ax/ac/abgn AP560i

Access Point

AP560i Overview

The AP560i is a cloud-ready, stadium-optimized Wi-Fi 6, and 802.11ax/ac/abgn access

point with internal antenna. The AP560i access point caters to the stadium environment

by supporting high density of users and devices.

The AP560i access point offers flexible deployment options and can be mounted under a

seat, to a pole, or to a wall.

Features

The AP560i access point has the following features:

• Radios: 2 radios (1 dual-band, 2.4GHz and 5GHz, and 1 band-locked 5GHz); 1 IoT Radio

(2.4 GHz)

• Two Ethernet ports:

– 1 x 100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45

– 1 x 10/100/1000 Mpbs auto-negotiation Ethernet port, RJ45

• Dimensions: 11.3 in. x 10 in. x 2.9 in. (288 mm x 254 mm x 75 mm)

• LEDs: Two top-mounted LEDs

– All LEDs will be on during reset.

• Security locks:

– One Kensington lock

– One security hanger lock

• Power: PoE 802.3at

• Antenna:

– One omnidirectional internal antenna

• Temperature:

– Operating temperature: -40 °F to +131 °F (-40 °C to +55 °C)

– Storage and transportation temperature: -40 °F to +158 °F (-40 °C to +70 °C)

• Humidity: 0% to 95% (non-condensing)

• Enclosure: Plastic

Figure 1 AP560i front view

AP560i Box Contents

Verify the box contents and ensure that the following items are available:

• One AP560i Quick Reference Guide

• One AP560i access point

Installation Options

AP560i can be mounted under a seat, to a pole, and to a wall by purchasing separate

mounting brackets, which are described in the following table.

Table 1 AP560i Mounting bracket usage

Note: The AP560i-FCC requires a minimum base firmware of WiNG 7.1.1.

Note: The AP560i-WR requires a minimum base firmware of WiNG 7.2.1.0-

015R.

Note: When you mount the AP on a riser with the metal "L" bracket only and

not with a large metal sloping bracket, it is recommended that you add a 3mm

stainless steel washer between the “L” brackets and the riser on all of the

anchors. The washer provides proper drainage during storms.

Mounting

bracket and

part number

Wall

install

Pole

install

Under seat

install Notes

EIO-04 under

seat enclosure

No No Yes The access point needs to be

positioned horizontally for under

seat installation.

KT-147407-02

bracket;

comes with

three bracket

parts

Yes Yes No For attaching to a wall or a flat

surface, use the bracket part that has

two holes on the surface of the metal

portion. For attaching to a pole, if

the 1-axis tilt is not required, attach

the pole part of the bracket to the

access point. If 1-axis tilt is required,

attach the pole part of the KT-

147407-02 bracket on top of the

second wall part.

KT-150173-01;

extension arm;

used with KT-

147407-02

bracket parts

Yes; use

the flat

wall

mount

part of

the KT-

147407-

bracket

Yes; use

the pole

mount

bracket

part of

the KT-

147407-

bracket

No The KT-150173-01 extension arm can

be used without the other KT-

147407-02 bracket parts.

For installation instructions, refer to the ExtremeWireless AP560i Access Point

Installation Guide on the Extreme Networks Documentation Support site.

Professional Installation Instructions

Installation personnel

This product is designed for specific application and needs to be installed by qualified

personnel with knowledge of RF and related rules. The general user must not attempt to

install or change the setting.

Installation location

The product shall be installed at a location where the radiating antenna can be kept 36

cm from nearby persons in normal operation condition to meet regulatory RF exposure

requirements.

External antenna

Use only approved antennas. Non-approved antennas might produce unwanted spurious

or excessive RF transmitting power which might lead to the violation of FCC/IC limit and

is prohibited.

Installation procedure

Refer to the AP560i Access Point Installation Guide for detailed instructions.

Instructions d'installation professionnelle

Installation

Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie

maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne

doivent pas etre modifies par l'utilisateur final.

Emplacement d'installation

En usage normal, afin de respecter les exigences reglementaires concernant l'exposition

aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 36

cm entre l'antenne emettrice et les personnes.

Antenn externe

Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres

antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel

depassant les niveaux limites definis par FCC/IC, ce qui est interdit.

Procedure d'installation

Consulter le manuel d'utilisation.

Regulatory and Compliance Information

Safety Guidelines

This section contains notices that are intended to protect your personal safety and

prevent damage to the equipment.

Qualified Personnel:

Federal Communications Commission (FCC) Notice

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the

FCC Rules.

Note: The AP560i cannot be installed without the mounting brackets. The KT-

150173-01 extension arm must be purchased separately.

Warning: When installing the access point to a wall or to a pole, the cable

glands must face down.

Warning: Select the installation position and ensure that the final output

power does not exceed the limit set forth in relevant rules. Violation of the rule

could lead to serious federal penalty.

Warning: Avertissement: Choisir avec soin la position d'installation et

s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La

violation de cette regle peut conduire a de serieuses penalites federales.

Electrical Hazard: Only qualified personnel must perform

installation procedures. Within the context of the safety notes in this

documentation, qualified persons are defined as persons who are

authorized to commission protective grounding, label devices,

systems, and circuits in accordance with established safety practices

and standards. A qualified person understands the requirements and

risks involved with installing electrical equipment in accordance with

national codes.

Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this

equipment.

Warning: FCC Radiation Exposure Statement: This equipment complies with

FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20 cm

between the radiator and your body.

Warning: FCC Radiation Exposure Statement: This EUT is compliant with

SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-

1992 and has been tested in accordance with the measurement methods and

procedures specified in OET Bulletin 65 Supplement C.

Industry Canada (IC) Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause

undesired operation of the device.

Cet appareil contient des émetteurs / récepteurs exempts de licence qui sont conformes

au (x) RSS (s) exemptés de licence d'Innovation, Sciences et Développement économique

Canada. L'opération est soumise aux deux conditions suivantes:

(1) Cet appareil ne doit pas provoquer d'interférences.

(2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles

de provoquer un fonctionnement indésirable de l'appareil.

For product available in the USA/Canada market, only channel 1~11 can be operated.

Selection of other channels is not possible.

Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11

peuvent être exploités. Sélection d'autres canaux n'est pas possible.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour

une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux

systèmes de satellites mobiles utilisant les mêmes canaux.

BSMI RoHS Table

NCC Statement

European Waste Electrical and Electronic Equipment

(WEEE) Notice

In accordance with Directive 2012/19/EU of the European Parliament on waste electrical

and electronic equipment (WEEE):

1 The symbol above indicates that separate collection of electrical and electronic

equipment is required.

2 When this product has reached the end of its serviceable life, it cannot be disposed of

as unsorted municipal waste. It must be collected and treated separately.

3 It has been determined by the European Parliament that there are potential negative

effects on the environment and human health as a result of the presence of hazardous

substances in electrical and electronic equipment.

4 It is the users’ responsibility to utilize the available collection system to ensure WEEE

is properly treated.

For information about the available collection system, please contact Extreme

Environmental Compliance at Gr[email protected].

Warning: IC Radiation Exposure Statement: This EUT is compliance with

SAR for general population/uncontrolled exposure limits in IC RSS-102 and had

been tested in accordance with the measurement methods and procedures

specified in IEEE 1528.

Warning: IC Déclaration d'exposition aux radiations: Cet EUT est conforme

au SAR pour les limites d'exposition de la population générale / non contrôlée

dans IC RSS-102 et a été testé conformément aux méthodes et procédures de

mesure spécifiées dans IEEE 1528.

P/N 9036160-04 Rev AB

Extreme Networks AP560i Guide de référence

Marque: Extreme Networks

Modèle: AP560i

Taper: Guide de référence

Télécharger le PDF

rapport

dans d''autres langues

English: Extreme Networks AP560i Reference guide

Extreme Networks AP560i Guide de référence

Extreme Networks AP560i Guide de référence

dans d''autres langues

Documents connexes