EcoFlow DELTA Pro Manuel utilisateur

EcoFlow DELTA Pro

User Manual V1.0

EN

Disclaimer

Read this user manual carefully before using the product to ensure that you completely

understand the product and can correctly use it. After reading this user manual, keep it

properly for future reference. Improper use of this product may cause serious injury to yourself

or others, or cause product damage and property loss. Once you use this product, it is deemed

that you understand, approve and accept all the terms and content in this document. EcoFlow

is not liable for any loss caused by the user's failure to use this product in compliance with this

user manual.

In compliance with laws and regulations, EcoFlow reserves the right to final interpretation of

this document and all documents related to this product. This document is subject to changes

(updates, revisions, or termination) without prior notice. Please visit EcoFlow's official website

to obtain the latest product information.

11

EN

Content

Specications

Safety Instructions

EcoFlow App

Product Details

Power On/Off

Charging Your Devices

Charging DELTA Pro

FAQ

X-Boost and EPS

What's in the Box

Storage and Maintenance

Troubleshooting

FCC Statement

Overview

LCD screen

Grid Power

Smart Extra Battery

Solar Charging

Car Outlet Charging

1

2

4

6

7

8

9

10

11

12

13

14

X-Boost

EPS

22

EN

Specications

General Info

Net Weight Approximately 45kg (99 lbs)

Dimension (L × W × H) 635×285×416mm (25 × 11 × 16 in)

Capacity 3,600Wh, 48V

Wi-Fi Frequency Range: 2412-2462MHz

Maximum Output Power: 0.05862W

Bluetooth Frequency Range: 2402-2480MHz

Maximum Output Power: 0.0006W

Output Ports

AC (×5) Pure sine wave, 3,600W total (surge 7,200W), 120V~

(60Hz)

USB-A (×2) 5V 2.4A, 12W Max per port, total 24W

USB-A Fast Charging (×2) 5V 2.4A 9V 2A 12V 1.5A, 18W Max per port, total

36W

USB-C (×2) 5/9/12/15/20V 5A, 100W Max per port, total 200W

Car Charger 12.6V 10A, 126W Max

DC5521 Output (×2) 12.6V 3A, 38W Max per port

Anderson Output 12.6V 30A, 378W Max

Input Ports

AC Charge 120V~ 1,800W Max, 240V~ 3,000W Max

AC Input Voltage 100-120V~ 15A, 220-240V~ 12.5A, 50Hz/60Hz

Solar Charger 11-150V 15A Max, 1,600W Max

Car Charger Supports 12V/24V Battery, default 8A

Battery Info

Cell Chemistry LFP

Cycle Life 3,500 cycles to 80% + capacity

Protection Type

Over Voltage Protection, Overload Protection, Over

Temperature Protection, Short Circuit Protection, Low

Temperature Protection, Low Voltage Protection,

Overcurrent Protection

33

EN

Safety Instructions

1. Do not use the product near a heat source, such as a re source or a heating furnace.

2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not

use the product in rain or humid environments.

3. Do not use the product in an environment with strong static electricity/magnetic elds.

4. Do not disassemble the product in any way or pierce the product with sharp objects.

5. Avoid using wires or other metal objects that may result in a short circuit.

6. Do not use unofcial components or accessories. If you need to replace any components or

accessories, please visit ofcial EcoFlow channels to check relevant information.

7. When using the product, please strictly follow the operating environment temperature

specied in this user manual. If the temperature is too high, it may result in a re or

explosion; if the temperature is too low, the product performance may be severely

reduced, or the product may cease to work.

8. Do not stack any heavy objects on the product.

9. Do not lock the fan forcibly during use.

Usage

10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe

external impact, turn off the power supply immediately and stop using the product. Ensure

Operating Temperature

Optimal Operating Temperature 20℃~30℃ (68℉ ~ 86℉)

Discharging Temperature -10℃~45℃ (14℉ ~ 113℉)

Charging Temperature 0℃~45℃ (32℉ ~ 113℉)

Storage Temperature -10℃~45℃ (14℉ ~ 113℉)

(optimal: 20℃~30℃ (68℉ ~ 86℉))

Add-ons (sold separately)

DELTA Pro Smart Extra Battery Up to two units

EcoFlow Smart Generator

DELTA Pro Remote Control Wired or wireless

Double Voltage Hub

EV X-Stream Adapter Charge from electric vehicle charging

1. A car charger shares power with the DC5521 output port, offering a maximum

output of 126W.

2. Whether the product can be charged or discharged depends on the actual

temperature of the battery pack.

44

EN

1. If conditions permit, make sure that the battery is fully discharged before disposing it

in a designated battery recycling bin. The product contains batteries with potentially

dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans.

For more details, please follow the local laws and regulations on battery recycling and

disposal.

2. If the battery cannot be fully discharged due to a product failure, please do not dispose

of the battery directly in the battery recycling box. In such case, you should contact a

professional battery recycling company for further processing.

3. Please dispose of over-discharged batteries that cannot be recharged.

Disposal Guide

the product is well fastened during transportation to avoid vibrations and impacts.

11. If you accidentally drop the product into water during use, please place it in a safe open

area, and stay away from it until it is completely dry. The dried product should not be used

again, and should be properly disposed of according to section "Disposal Guide" below. If

the product catches re, we recommend that you use the re extinguishers in the following

order: water or water mist, sand, re blanket, dry powder, and nally a carbon dioxide re

extinguisher.

12. Use a dry cloth to clean off dirt on the product ports.

13. Rest the product on a at surface to avoid damages caused by the product falling over. If

the product is overturned and severely damaged, turn it off immediately, place the battery

in an open area, keep it away from combustible matter and people, and dispose of it in

accordance with local laws and regulations.

14. Ensure that the product is kept out of reach of children and pets.

15. Store the product in a dry and ventilated place.

16. It is recommended to use moisture barrier bags in wet environments (for example,

places by the sea or waterways) to prevent the product from getting soaked. If water is

found inside the product, it must not be used or turned on again. Please take anti-eletric

shock measures before touching the product. Following this, place the product in a safe,

waterproof and open area. Once complete contact EcoFlow Customer Service immediately.

17. This product is not recommended for powering medical emergency equipment related to

personal safety, including but not limited to medical grade ventilators (hospital version

CPAP: Continuous Positive Airway Pressure), articial lungs (ECMO, Extracorporeal

Membrane Please follow your doctor's instructions and consult with the manufacturer for

restrictions on the use of the equipment. If used for general medical equipment, please be

sure to monitor the power status to ensure that the power does not run out.

18. When in use, power supply products will generate electromagnetic elds, which are

likely to affect the normal operation of medical implants or personal medical equipment

such as pacemakers, cochlear implants, hearing aids, debrillators etc. If these types of

medical equipment are being used, please contact the manufacturer to inquire about any

restrictions on the use of such equipment. These measure are fundamental to ensure a

safe distance between the medical implants (for example, pacemakers, cochlear implants,

hearing aids, debrillators etc.) and this product while in use.

19. When the power supply is connected in normal mode to a refrigerator, power uctuations

may cause the power supply to automatically shut down. When connecting the power

supply to a refrigerator that stores medicine, vaccines or other valuable items, it is

recommended to set the AC output to "Always on" in the app. This helps support a

continuous power supply and ensures a safe and efcent power consumption state.

55

EN

What’s in the Box

Product Details

Overview

Car Charging Cable

User Manual &

Warranty Card

DC5521 to DC5525 Cable Handle Cover

AC Charging CableDELTA Pro

Control, monitor and customize your EcoFlow DELTA Pro from afar with the EcoFlow App.

Download at: https://download.ecoow.com/app

Privacy policy

By using EcoFlow Products, Applications and Services, you

consent to the EcoFlow Term of Use and Privacy Policy, which

you can access via the “About” section of the “User” page on the

EcoFlow App or on the ofcial EcoFlow website at

https://www.ecoow.com/policy/terms-of-use

and

https://www.ecoow.com/policy/privacy-policy

EcoFlow App

66

EN

1. Ambient light detector

2. LCD screen

3. USB-A output port

4. Main power button

5. AC power button

6. AC output socket

(20 A max. per port)

1. Anderson port

2. 12V DC power button

3. IOT button

7. Pairing indicator

8. USB-A fast charging

output port

9. Main power button indicator

10. USB-C 100W output port

11. AC output socket

(30 A max.)

4. Pairing button

5. Car outlet

6. DC5521 output port

Bluetooth standby:

After the Bluetooth standby switch is turned on, DELTA Pro still works with the main

power button turned off, use EcoFlow app or remote control (sold separately) to turn

on/off the product (Bluetooth standby has a certain amount of power consumption,

please turn it off if you don’t need to remotely control the product).

7. Remote control port

8. Bluetooth standby switch

9. Innity port

12. AC charge speed switch

13. Solar/car charging input port

14. X-Stream charging input port

15. Overload protection switch

16. Extra battery port

The type of AC socket varies in different countries or regions, the picture above is for

illustration only, please refer to the actual product.

❶

❻

❽

❼

❾

❸

❹

❺

❷

❶

❻

❽

❼

❸

❹

❺

❷

⓫

⓬

⓭

⓮

⓯

⓰

❿

❾

77

EN

Icon Name State

Remaining

battery

Rotating clockwise: charging

100%: fully charged

Flashing: at battery

Error code Refer to the EcoFlow app for details

Wi-Fi

Flashing: 1) the product is ready for pairing;

2) pair with the product via

hotspot on your phone

Solid: Internet connection succeeded

Off: Internet connection failed

LCD Screen

Refer to "Troubleshooting" for details.

1. Remaining battery percentage

2. EV X-Stream charging indicator

3. Bluetooth connection

4. WiFi connection

5. Remote control

6. State of charge

7. Fan

8. Input power

9. Output power

10. Battery failure warning

11. Error code

12. Solar charging

13. Smart generator

14. Overload warning

15. High temp warning

16. Remaining charge/discharge time

17. Low-temp warning

18. Extra battery

19. AC output

20. USB-A output

21. USB-C output

22. DC output

❽

❼

❾

❿

⓫

⓬

❶

⓰

❻❸ ❹ ❺❷

⓭

⓮

⓯

⓱

⓲

⓳

⓴

88

EN

Power On/Off

Charging Your Devices

Press the main power button once to turn on the product, then the LCD screen lights up and

the main power indicator becomes breathing white; press and hold the main power button for

at least 3 seconds to turn off the product, meanwhile, the LCD screen also goes off.

Press “DC power button” or “AC power button” once to turn on their corresponding DC/AC

ports or sockets; press again to turn them off.

1. After main power turned on, press the main power button once to turn off the LCD

screen

2. If the product is not used for 5 minutes, it will enter hibernation state with the

LCD screen gone off. When you start to use the product again, the LCD screen

will turn on automatically.

3. The product defaults to 2 hours of standby time. With the output power buttons

turned off and no other load for 2 hours, the product will shut off automatically.

You can set the standby duration in the app.

Short press 12V DC power button

Short press AC power button

99

EN

Charging DELTA Pro

EcoFlow’s X-Stream fast charging technology is specically for AC charging, offering 1800W of

max input power. You can control the charging power through the AC charging Speed Switch.

The default max input power for the AC charging speed is 400W, which can be modied in the

EcoFlow app.

In case of unusual situations where the AC input current remains higher than 20A, the X-Stream

charging input port will initiate a self-protection function, and the Overload Protection Switch on

the product will automatically pop up. After conrming that there is no product failure, you can

press the Overload Protection Switch to resume charging.

Grid Power

1. Please make sure that the product is turned on.

2. After the DC output power button is turned on, the product will not shut off

automatically.

3. Make sure that the sum power of all loaded devices is lower than that of the rated

power.

4. After 12 hours without any load for the AC output ports, the AC power button will

shut down automatically.

AC charging cable

X-Stream fast

charging 1,800 W Max

≈ Fully charged in 2.7hrs

1010

EN

The charging power can be adjusted through the AC Charge Speed Switch on the back of the

product. You can set the charging power range in the EcoFlow App.

Solar Charging

Please use the AC Charging Cable included in the package for fast charging. Do

not use other cables to charge. Plug directly into an AC wall outlet and make sure

that the wall output current is more than 15A. Otherwise, reduce the unit charging

speed with the AC Charge Speed Switch. EcoFlow takes no responsibilities for any

consequences caused by failures to follow instructions, including but not limited to

charging with other AC charging cables.

1. Solar charging cable (MC4-XT60 adapter cable) and the solar panel are supplied

separately.

2. When using an EcoFlow solar panel to charge the product, please follow the

instructions that come with the solar panel.

3. Before connecting the solar panel, please ensure that the solar panel’s output

voltage is within 150V to avoid product damages.

Solar charging cable*

Solar panel*

X-Stream charging:

1,800W Max input

Customized charging

power: 200~1,800W

(default: 400W)

1111

EN

Smart Extra Battery

A single DELTA Pro can link with up to two Smart Extra Batteries at once for added capacity.

Refer to the user manuals of the Smart Extra Battery and Smart Generator for detailed

instructions.

111000...777000

1. Turn off both the Smart Extra Battery

and DELTA Pro before connecting or

disconnecting them.

2. Before using, make sure both DELTA

Pro and Smart Extra Battery display

the extra battery icon on their

screens.

3. Turn off the Smart Battery before

connecting or disconnecting it.

4. Do not touch the metal terminals of

the Smart Extra Battery connector.

If the metal terminals need to be

cleaned, gently wipe them with a dry

cloth.

Users can recharge the product through the Car Outlet. It supports 12V/24V car chargers and

an 8A default charging current.

Please charge using the car charger after you’ve started the car to avoid failure to start

due to insufcient car battery. In addition, please make sure that the cigarette lighter of

the Car Outlet and the Car Charger Input Cable are in good condition. EcoFlow takes no

responsibilities for any losses or damages caused by failures to follow instructions.

Car Charging

Car charging cable

1212

EN

1. X-Boost is not available when the AC output is turned on in a recharging state (in bypass

mode).

2. X-Boost is not applicable for all electrical appliances; it’s incompatible with appliances

with strict voltage requirements and a rated power over 3600W. Appliances with voltage

protection (such as precise instruments) are not supported. X-Boost mode is more suitable

for heating devices. Please conduct your own tests with your devices with X-Boost enabled.

The product supports EPS. When you connect the grid power to the AC Input Port of the

product through an AC cable, you can power electrical devices through the AC Output Port

(AC power will come from the grid and not the power station in this situation). In case of a

sudden blackout, the product can automatically switch to the battery powered supply mode

within 30ms.

X-Boost and EPS

X-Boost

EPS

With EcoFlow X-Boost technology, the product can power a 4,500W max. device while the

rated output power remains 3,600W, avoiding operation failure due to ovverload protection.

X-Boost Tips:

Bypass mode: When the product is plugged into the power socket for recharging and

connected to other devices at the same time, it cannot provide power to the devices if

the AC power button is turned on, instead, the devices are powered by the grid.

As a basic UPS function, this function does not support 0ms switching. Please do not

connect the product to any device that requires 0ms UPS, such as data servers and

workstations. Please test and confirm the compatibility before using the product. We

recommend that you only charge one device at a time and avoid using multiple ones

at the same time to avoid overload protection. EcoFlow takes no responsibilities for

any device failures or data losses caused by failures to follow instructions.

1313

EN

Storage and Maintenance

1. Ideally, use and store the product in a place of between 20°C ~ 30°C (68°F ~ 86°F), and

always keep it away from water, intense heat, and sharp objects. For an extended product

lifespan, do not store it in places of temperatures above 45°C (113°F) or below -10°C

(14°F).

2. For long-term storage, please discharge the product every three months (rstly discharge

it to 0%, then fully recharge it, and lastly discharge it to 60%); the product will not be

covered by the warranty if it is not charged or discharged for more than 6 months.

FAQ

1. What battery does the product use?

High-quality LFP battery.

2. What devices can the product’s AC output port power?

With 3600W rated power and 7200W peak power, the product’s AC output ports can

power most household appliances. Before you use it, we recommend that you conrm the

power of the appliances rst and ensure the sum power of all loaded appliances is lower

than that of the rated power.

3. How long can the product charge my devices?

The charging time is shown on the product’s LCD Screen, which can be used to estimate

the charging time of most appliances with stable power usage.

4. How do I know if the product is charging?

When it’s charging, the remaining charging time will be shown on the LCD Screen.

Meanwhile, the charging indicator icon begins to rotate with the remaining battery

percentage and the input power shown on the right of the circle.

5. How do I clean the product?

Gently wipe it with a dry, soft, clean cloth or paper towel.

6. How do I store the product?

Before storing, please turn off the product rst, and then store it in a dry and ventilated

place at room temperature. Do not place it near water sources. For long-term storage,

please discharge and recharge it every three months to extend its battery life (See

"Storage and Maintaince" for details).

7. Can I bring the product on a plane?

No.

8. How do I recharge DELTA Pro at 200V–240V in a 100V–120V region?

The cable provided with your DELTA Pro cannot be plugged into higher-voltage outlets,

you need a third party adapter/charging cable.

1414

EN

Troubleshooting

Indicator Problem

Resume normal operation by removing

the electrical device connected to the

USB-A port.

Resume normal operation by removing

the electrical device connected to the

USB-C port.

After the product cools down, it will

resume normal operation automatically.

Charging can be resumed automatically

after the battery cools down.

The power supply can be resumed

automatically after the battery cools

down.

Charging can be resumed automatically

after battery temperature rises above 5°C

(41°F).

The power supply can be resumed

automatically after the battery temperature

rises above -12°C (10°F).

Please confirm whether the fan inlet and

outlet are blocked, if not, normal operation

will be resumed automatically after the

product temperature drops.

Normal operation will be resumed

automatically after the product is used at

optimum environmental temperatures.

Please check if the fan is blocked by

foreign materials.

Normal operation will be resumed

automatically after you remove the

overloaded device and restart the

product.

Electrical appliances should be used

within rated power.

(Refer to X-Boost instructions to get more

details about power limitations).

Solution

The product will resume normal operation

automatically after you remove the device

connected to the car charger.

After the product cools down, it will resume

normal operation automatically.

Contact EcoFlow customer service.

USB-A Overload

Protection

(Flashing)

(Stays on)

USB-C Overload

Protection

(Flashing)

USB-C High

Temperature Protection

High Temperature

Charge Protection

High Temperature

Discharge Protection

Low Temperature

Charge Protection

Low Temperature

Discharge Protection

AC Output

Overload Protection

AC High

Temperature Protection

AC Low

Temperature Protection

Fan Blockage

Car Charger

Overload Protection

Car Charger High

Temperature Protection

Battery Failure

If the alarm prompt shows on the product LCD screen during use and does not disappear

after a restart, please stop using it immediately (do not try to charge or discharge). If you

require any other assistance, please contact EcoFlow Customer Service.

1515

EN

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with minimum distance 20cm between the

radiator & your body.

FCC Warning

FR

Clause de non-responsabilité

Lisez attentivement ce manuel d'utilisation avant d'utiliser le produit pour vous assurer

que vous comprenez parfaitement le produit et que vous pouvez l'utiliser correctement.

Après avoir lu ce manuel d'utilisation, conservez-le soigneusement à des ns de référence

ultérieure. Si vous n'utilisez pas ce produit correctement, vous risquez de vous blesser

gravement ou de blesser d'autres personnes, ou d'endommager le produit et de

provoquer des dégâts matériels. Dès que vous utilisez ce produit, vous êtes réputé avoir

compris, approuvé et accepté tous les termes et contenus de ce document. EcoFlow n'est

pas responsable de toute perte causée par le fait que l'utilisateur n'utilise pas le produit

conformément au présent manuel d'utilisation.

Conformément aux lois et règlements, EcoFlow se réserve le droit d'interprétation nale

de ce document et de tous les documents relatifs au produit. Ce document est susceptible

d'être modié (mises à jour, révisions ou résiliation) sans avis préalable. Veuillez visiter le

site Web ociel d'EcoFlow pour obtenir les dernières informations sur le produit.

FR

Contenu

Spécications

Instructions de sécurité

Application EcoFlow

Détails du produit

Mise sous tension/hors tension

Charger vos appareils

Charger votre DELTAPro

FAQ

X-Boost et EPS

Contenu de la boîte

Rangement et entretien

Dépannage

Vue d'ensemble

ÉcranLCD

ChargeCA

Batterie supplémentaire intelligente

Charge solaire

Charge sur prise de voiture

1

2

4

6

7

8

9

10

11

12

13

X-Boost

EPS

Déclaration de conformité de la FCC 14

La page charge ...

EcoFlow DELTA Pro Manuel utilisateur

EcoFlow DELTA Pro Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents