EcoFlow DELTA Pro Manuel utilisateur

Marque: EcoFlow

Modèle: DELTA Pro

Taper: Manuel utilisateur

EcoFlow DELTA Pro User Manual

Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer

to the terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use

and stickers on the product before use. Users take full responsibility for all usage

and operations. Familiarize yourself with the related regulations in your area. You

are solely responsible for being aware of all relevant regulations and using EcoFlow

products in a way that is compliant.

DISCLAIMER

EcoFlow DELTA Pro (Hereinafter referred to as DELTA Pro)

3.1 Product Details

3.2 LCD Screen

3.3 General Product Usage

3.4 AC Charging

3.5 Solar Charging

3.6 Car Charging

3.7 Using Smart Extra Battery

3.8 APP

3.9 X-Boost

3.10 Emergency Power Supply (EPS)

2. Safety Instructions

1. Specifications

3. Getting Started

4. FAQs

5. Troubleshooting

6. What’s In the Box

7. Storage & Maintenance

CONTENTS

2.1 Usage

2.2 Disposal Guide

1. Specifications

Input Ports

AC Charge

AC Input Voltage

Solar Charger

Car Charger

230V~ 2875W Max

100-120V~ 12.5A, 220-240V~ 12.5A, 50Hz/60Hz

11-150V 15A Max, 1600W Max

Supports 12V/24V Battery, Default 8A

USB-A (x2)

USB-A Fast Charge (x2)

USB-C (x2)

Car Charger

DC5521 Output (x2)

Anderson Output

5V 2.4A, 12W Max per port

5V 2.4A 9V 2A 12V 1.5A, 18W Max per port

5/9/12/15/20V 5A, 100W Max per port

12.6V 10A, 126W Max

12.6V 3A, 38W Max per port

12.6V 30A, 378W Max

General Info

Output Ports

Net Weight

Dimensions

Capacity

Wi-Fi

Bluetooth

Approximately 45kg (99lbs)

635 x 285x 416mm (25x11.2x16.4in)

3600Wh, 48V

Supported

Battery Info

Cell Chemistry

Cycle Life

LFP

3500 cycles to 80%+ capacity

* A car charger shares power with the DC5521 output port, offering a maximum output of 126W.

AC (x4) Pure Sine Wave, 3600W total (surge 7200W),

230V~ (50Hz/60Hz)

Protection

Over Voltage Protection, Overload Protection,

Over Temperature Protection, Short Circuit

Protection, Low Temperature Protection, Low

Voltage Protection, Overcurrent Protection

2. Safety Instructions

1. Do not use the product near a heat source, such as a fire source or a heating furnace.

2. Avoid contact with liquids of any kind. Do not use in the rain or high humidity.

3. Do not use around strong static electricity or magnetic fields.

4. Do not disassemble in any way or puncture.

5. Avoid using wires or other metal objects that may result in a short circuit.

6. Do not use third-party components or accessories. Consult official EcoFlow channels if you need to

replace any component or accessory.

7. When using the product, please strictly follow the operating environment temperature specified in

this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature

is too low, the product performance may be severely reduced, or the product may cease to work.

8. Do not stack any heavy objects on the product.

9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.

10. Ensure the product is not hit, dropped, or heavily vibrated. Securely fasten the product when

transporting to avoid damage. If severely damaged, turn off the power source immediately and

discontinue using the product.

11. If you accidentally drop the product into water during use, please place it in a safe open area, and

stay away from it until it is completely dry. The dried product should not be used again, and should

be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend

that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry

powder, and finally a carbon dioxide fire extinguisher.

12. Only clean the ports with a dry cloth.

2.1 Usage

Add-ons (sold separately)

Up to two units

Wired or wireless

Charge from electric vehicle charging

DELTA Pro Smart Extra Battery

EcoFlow Smart Generator

DELTA Pro Remote Control

EV X-Stream Adapter

Environmental Operating Temperature

Optimal Operating Temperature

Discharge Temperature

Charge Temperature

Storage Temperature

20°C ~ 30°C (68°F ~ 86°F)

-10°C ~ 45°C (14°F ~ 113°F)

0°C ~ 45°C (32°F ~ 113°F)

-10°C ~ 45°C (14°F ~ 113°F)

(optimal: 20°C ~ 30°C (68°F ~ 86°F))

2.2 Disposal Guide

1. When possible, fully discharge the battery before disposing it. Because it contains hazardous

chemicals, only dispose of the battery in designated recycling channels and never with ordinary

trash. Consult your local laws on battery recycling and disposal.

2. If the battery cannot be fully discharged due to product failure, contact a professional battery

recycling company for further processing.

3. Please dispose of batteries that no longer recharge.

13. Place on a flat surface to keep the product from falling over. If the product is overturned and

severely damaged, turn it off immediately, place the battery in an open area, keep it away from

people and combustibles, and dispose of it in accordance with local laws and regulations

14. Keep out of reach of children and pets.

3.1 Product Details

3. Getting Started

Pairing Status

LCD Screen

Ambient Light Detection

USB-C 100W

Output Port (*2)

USB-A Output Port(*2)USB-A Fast Charge Output Port(*2)

Main Power Button

AC Output Sockets AC Power Button

Note: The above figure shows the different types of sockets in different countries. It is for reference

only, please refer to the actual product.

EU Version International Version UK Version

AC Charge Speed Switch

Solar/Car Charging

Input Port

Overload Protection

Switch

Extra Battery Port (*2)

X-Stream AC Charging Input Port

Anderson Port

Remote Control Port

IOT Button

Pairing Button

12V DC Power Button

Infinity Port

Standby Switch

Car Outlet

DC5521 Output Port

3.2 LCD Screen

Appears whenever a connected EcoFlow Smart Generator automatically

shuts off after detecting unsafe carbon monoxide levels.

Refer to the EcoFlow app for specific error codes.

After the IOT button has been pressed for 3 seconds, the Wi-Fi icon will

flash to indicate the product is ready for pairing. Connect the product

with the app, either (1) by finding the product on your phone's Wi-Fi

connections or (2) by connecting the product to the internet. If the former,

the icon will keep flashing; if the latter, the icon will not flash.

The ring will fill up while charging. If the product is at 0% charge, the ring

will flash

Battery Level Indicator:

Wi-Fi Status:

Error Code:

Carbon Monoxide Alert:

* See Section 5 for more troubleshooting steps.

Remote Control Indicator

Pairing Indicator

State of Charge

Remaining Charge/

Discharge Time

EV X-Stream Charging Indicator

Remaining Battery Percentage

Wi-Fi Status

Smart home panel

Double Power

Indicator

DC Output

Smart Generator Indicator

Overload Warning

Extra Battery

Indicator

AC Output

USB-A/USB-C

Output

Low Temperature

Warning

High Temperature

Warning

Fan Indicator

Output Power

Battery Failure Warning

Error Code

Carbon Monoxide Alert

Solar Panel Indicator

Input Power

With the Main Power Button turned on, short press the 12V

DC Power Button to use the 12V DC Output port. Short press

the 12V DC Power Button again to turn it off.

With the 12V DC Power Button on, the product will not

automatically shut down.

12V DC Output Port

With the Main Power Button turned on, short press the AC

Power Button to use the AC Output ports. Short press the

AC Power Button again to turn it off.

The default standby time of the AC Output port is 12 hours.

Without any load access for 12 hours, the AC Power Button

will automatically turn off.

Please turn off AC power button when not in use to save

power consumption.

AC Output Port

Short Press

12V DC Power Button

Short Press

AC Power Button

Product On, Product Off, LCD Screen On

3.3 General Product Usage

Short Press to Turn On Long Press to Turn Off

Short press the Main Power Button to turn on the product; the LCD Screen will light up and the

battery level indicator icon will display.

The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically

turn off. When the product senses any load change or operations, the LCD Screen will automatically

light up. To turn the LCD Screen on or off, please short press the Main Power Button.

To power off the product, press and hold the Main Power Button.

The default product standby time is 2 hours. With other Power Buttons turned off and no other load

access for 2 hours, the product will automatically shut down. The standby time can be set on the APP.

X-Stream Fast Charging

2875W Max input Power

EcoFlow’s X-Stream fast charge technology is specifically for AC charging, offering 1800W of max

input power. You can control the charging power through the AC Charge Speed Switch. The default

max input power for the AC charging speed is 400W, which can be modified in the EcoFlow app.

In case of unusual situations where the AC input current remains higher than 20A, the X-Stream

charging input port will initiate a self-protection function, and the Overload Protection Switch on the

product will automatically pop up. After confirming that there is no product failure, you can press the

Overload Protection Switch to resume charging.

The charging power can be adjusted through the AC Charge Speed Switch on the back of the

product. You can set the charging power range in the EcoFlow App.

Please use EcoFlow AC Cable for fast charging. EcoFlow takes no responsibilities for any

consequences caused by failures to follow instructions, including but not limited to charging with

third-party AC cables.

EcoFlow APP

≈1.9 hrs Full Charge

3.4 AC Charging

English editio n

AC Charging

Cable

Customized Charging Power Rate

Range: 200-2875W

(Default: 400W)

X-Stream Fast Charging

2875W Max input Power

Users can connect solar panels in series as shown in the figure to recharge the product. The product

supports 11-150V DC input, 15A max current, and 1600W max charging power.

When using an EcoFlow solar panel to charge the product, please follow the instructions that come

with the solar panel.

Before connecting the solar panel, please ensure that the solar panel’s output voltage is within 150V

to avoid product damages.

Users can recharge the product through the Car Outlet. It supports 12V/24V car chargers and an 8A

default charging current.

Please charge using the car charger after you’ve started the car to avoid failure to start due to

insufficient car battery. In addition, please make sure that the cigarette lighter of the Car Outlet and

the Car Charger Input Cable are in good condition. EcoFlow takes no responsibilities for any losses or

damages caused by failures to follow instructions.

3.5 Solar Charging

3.6 Car Charging

Car Charging Cable

MC4

Solar Charging Cable

400W Solar Panel

A single DELTA Pro can link with up to two Smart Extra

Batteries at once for added capacity. Refer to the user

manuals of the Smart Extra Battery and Smart Generator

for detailed instructions.

Precautions:

1. Turn off both the Smart Extra Battery and DELTA Pro

before connecting or disconnecting them.

2. Before using, make sure both DELTA Pro and Smart Extra

Battery display the extra battery icon on their screens.

3. Turn of the Smart Battery before connecting or

disconnecting it.

4. Do not touch the metal terminals of the Smart Extra

Battery connector. If the metal terminals need to be

cleaned, gently wipe them with a dry cloth.

With EcoFlow X-Boost technology, the product can power a 4500W Max device while the rated

output power remains 3600W, avoiding operation failure due to overload protection.

X-Boost Tips:

1. X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode).

2. X-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with strict

voltage requirements and a rated power over 3600W. Appliances with voltage protection (such as

precise instruments) are not supported. X-Boost mode is more suitable for heating devices. Please

conduct your own tests with your devices with X-Boost enabled.

3.7 Using Smart Extra Battery

3.8 APP

3.9 X-Boost

The EcoFlow App gives users the ability to control and monitor EcoFlow

power stations remotely.

Read the EcoFlow App user guide and access the download link here:

https://ecoflow.com/pages/ecoflow-app

By using EcoFlow Products, Applications and Services, you consent to

the EcoFlow Term of Use and Privacy Policy, which you can access via

the "About" section of the "User" page on the EcoFlow App or on the

official EcoFlow website at https://ecoflow.com/pages/terms-of-use

and https://ecoflow.com/pages/privacy-policy

111000...777000

1. What battery does the product use?

It uses high-quality LFP battery.

2. What devices can the product’s AC output port power?

With 3600W rated power and 7200W peak power, the product’s AC output port can power

most household appliances. Before you use it, we recommend that you confirm the power of the

appliances first and ensure the power sum of all loaded appliances is lower than the rated power.

3. How long can the product charge my devices?

The charging time is shown on the product’s LCD Screen, which can be used to estimate the charging

time of most appliances with stable power usage.

4. How can I know if the product is charging?

When it’s charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the

charging indicator icon begins to rotate with the remaining battery percentage and the input power

shown on the right of the circle.

5. How to clean the product?

Please gently wipe it with a dry, soft, clean cloth or paper towel.

6. How to store the product?

Before storing, please turn off the product first, and then store it in a dry, ventilated place at room

temperature. Do not place it near water sources. For long-term storage, please discharge the battery

to 30% and recharge it to 60% every three months to extend its battery life.

7. Can I bring the product on a plane?

No.

4. FAQs

The product supports EPS. When you connect the grid power to the AC Input Port of the product

through an AC cable, you can power electrical devices through the AC Output Port (AC power will

come from the grid and not the power station in this situation). In case of a sudden blackout, the

product can automatically switch to the battery powered supply mode within 30ms. As a basic UPS

function, this function does not support 0ms switching. Please do not connect the product to any

device that requires 0ms UPS, such as data servers and workstations. Please test and confirm the

compatibility before using the product. We recommend that you only charge one device at a time

and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no

responsibilities for any device failures or data losses caused by failures to follow instructions.

3.10 Emergency Power Supply (EPS)

5. Troubleshooting

If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a

restart, please stop using it immediately (do not try to charge or discharge).

If you require any other assitance, please contact EcoFlow Customer Service.

Indicator Problem

Resume normal operation by

removing the electrical device

connected to the USB-A port.

Resume normal operation by

removing the electrical device

connected to the USB-C port.

After the product cools down,

it will resume normal operation

automatically.

Charging can be resumed

automatically after the battery cools

down.

The power supply can be resumed

automatically after the battery cools

down.

Charging can be resumed

automatically after battery

temperature rises above 5°C (41°F).

The power supply can be resumed

automatically after the battery

temperature rises above -12°C (10°F).

Please confirm whether the fan inlet

and outlet are blocked, if not, normal

operation will be resumed automatically

after the product temperature drops.

Normal operation will be resumed

automatically after the product is

used at optimum environmental

temperatures.

Please check if the fan is blocked by

foreign materials.

After the product cools down,

it will resume normal operation

automatically.

Contact EcoFlow Customer Service

Normal operation will be resumed

automatically after you remove the

overloaded device and restart the

product.

Electrical appliances should be used

within rated power.

(Refer to X-Boost instructions

to get more details about power

limitations).

Solution

The product will resume normal

operation automatically after you

remove the device connected to the car

charger.

USB-A Overload

Protection

(Flashing)

(Stays On)

USB-C Overload

Protection

USB-C High

Temperature Protection

High Temperature

Charge Protection

High Temperature

Discharge Protection

Low Temperature

Charge Protection

Low Temperature

Discharge Protection

AC Output

Overload Protection

AC High

Temperature Protection

AC Low

Temperature Protection

Fan Blockage

Car Charger

Overload Protection

Car Charger High

Temperature Protection

Battery Failure

1. Ideally, use and store the product between 20°C ~ 30°C (68°F ~ 86°F), and always keep it away

from water, intense heat, and sharp objects. Do not store in temperatures above 45°C (113°F) or

below -10°C (14°F) for an extended period.

2. Storing a battery with a low charge for a long period shortens its lifespan. DELTA Pro mitigates the

damage by putting the battery into hibernation mode. To get the most out of the battery, make

sure it is about 60% before putting DELTA Pro into long-term storage, and then once every three

months, discharge the battery to 30% and recharge it back to 60%.

6. What’s In the Box

7. Storage & Maintenance

Solar Charging Cable

User Manual &

Warranty Card

DELTA Pro

DC5521 to DC5525 Cable

AC Charging Cable

Handle Cover

Car Charging Cable

DELTA Pro to

Smart Generator Adapter

EcoFlowDELTA Pro Benutzerhandbuch

Lesen Sie alle Sicherheits- und Warnhinweise, Nutzungsbedingungen und Haftungsausschlüsse

sorgfältig durch. Beachten Sie vor der Verwendung die Nutzungsbedingungen und den

Haftungsausschluss unter https://ecoflow.com/pages/terms-of-use sowie die Aufkleber auf

dem Produkt. Benutzer übernehmen die volle Verantwortung für Verwendung und Betrieb des

Produkts. Machen Sie sich mit den entsprechenden Vorschriften in Ihrem Land vertraut. Sie

sind allein dafür verantwortlich, alle relevanten Vorschriften zu kennen und EcoFlow-Produkte

gemäß dieser Vorschriften zu verwenden.

HAFTUNGSAUSSCHLUSS

EcoFlow DELTA Pro (nachfolgend als DELTAPro bezeichnet)

3.1 Produktdetails

3.2 LCD-Anzeige

3.3 Allgemeine Betriebsanweisungen

3.4 AC-Ladung

3.5 Solarladung

3.6 Kfz-Ladung

3.7 Verwenden des Intelligenten Zusatzakkus

3.8 App

3.9 X-Boost

3.10 Notstromversorgung

2. Sicherheitshinweise

1. Spezifikationen

3. Erste Schritte

4. FAQ-Bereich

5. Fehlerbehebung

6. Lieferumfang

7. Lagerung und Wartung

INHALT

2.1 Verwendung

2.2 Sachgemäße Entsorgung

1. Spezifikationen

Eingänge

AC-Ladung

AC-Eingangsspannung

Solarladegerät

Kfz-Ladegerät

230V~ max. 2875W etwa 100–120V~ 12,5A, etwa 220–240V~

12,5A, 50Hz/60Hz

11–150V max. 15A, max. 1600W

Unterstützt 12/24V Akku, Standard 8A

USB-A (x2)

USB-A-Schnellladung (x2)

USB-C (x2)

Kfz-Ladegerät

DC5521-Ausgang (x2)

Anderson-Ausgang

5V 2,4A, max. 12W pro Anschluss

5V 2,4A 9V 2A 12V 1,5A max. 18W pro Anschluss

5/9/12/15/20V 5A max. 100W pro Anschluss

12,6V 10A, max. 126W

12,6V 3A, max. 38W pro Anschluss

12,6V 30A, max. 378W

Allgemeine Informationen

Ausgänge

Nettogewicht

Abmessungen

Kapazität

WLAN

Bluetooth

ca. 45kg (99lbs)

635x285x416mm (25x11.2x16.4in)

3600Wh, 48V

Unterstützt

Informationen zum Akku

Zellenchemie

Lebensdauer

LFP

3500 Zyklen bis 80%+ Kapazität

*Ein Kfz-Ladegerät teilt die Leistung mit dem DC5521-Ausgang und bietet eine maximale Leistung von 126W.

AC (x4) Reine Sinuswelle, 3600W insgesamt

(kurzeitig 7200W), 230V~(50Hz)

Schutz

Überspannungsschutz, Überlastschutz,

Übertemperaturschutz, Kurzschlussschutz,

Niedertemperaturschutz, Tiefentladeschutz,

Überstromschutz

1. Verwenden Sie das Produkt nicht in der Nähe einer Wärmequelle, z.B. eines offenen Feuers oder Heizofens.

2. Vermeiden Sie den Kontakt mit Flüssigkeiten jeglicher Art. Verwenden Sie das Gerät nicht bei Regen oder bei

hoher Luftfeuchtigkeit.

3. Verwenden Sie das Gerät nicht in einer Umgebung mit starker, statischer Elektrizität bzw. Magnetfeldern.

4. Bauen Sie das Gerät nicht auseinander und durchstechen Sie es nicht.

5. Vermeiden Sie die Verwendung von Drähten oder anderen Metallobjekten, die zu einem Kurzschluss führen

können.

6. Verwenden Sie keine Komponenten oder Zubehörteile von Drittanbietern. Wenden Sie sich an offizielle

EcoFlow-Kanäle, wenn Sie eine Komponente oder ein Zubehörteil ersetzen müssen.

7. Beachten Sie bei der Verwendung des Produkts unbedingt die in dieser Bedienungsanleitung angegebene

Umgebungstemperatur. Wenn die Temperatur zu hoch ist, kann dies zu einem Brand oder einer Explosion

führen. Wenn die Temperatur zu niedrig ist, kann das die Leistung des Produkts stark beeinträchtigen oder zu

Ausfällen führen.

8. Stellen Sie keine schweren Gegenstände auf das Gerät.

9. Blockieren Sie nicht den Lüfter während des Gebrauchs und stellen Sie das Gerät nicht an unbelüfteten oder

staubigen Orten ab.

10. Schützen Sie das Gerät vor starken Stößen und Vibrationen. Stellen Sie sicher, dass das Produkt beim

Transport sicher befestigt ist, um Schäden zu vermeiden. Wenn das Produkt schwere Schäden aufweist,

trennen Sie es sofort von der Stromversorgung und verwenden Sie es nicht mehr.

11. Wenn Sie das Produkt während des Gebrauchs versehentlich in Wasser fallen lassen, legen Sie es an einen

sicheren, offenen Ort und lassen Sie es vollständig trocknen, ohne erneut damit in Kontakt zu kommen.

Dasgetrocknete Produkt darf nicht mehr verwendet werden und muss gemäß Abschnitt2.2 ordnungsgemäß

entsorgt werden. Wenn das Produkt Feuer fängt, empfehlen wir, die Feuerlöscher in der folgenden

Reihenfolge zu verwenden: Wasser oder Wassernebel, Sand, Feuerdecke, Trockenpulver und schließlich einen

Kohlendioxid-Feuerlöscher.

2. Sicherheitshinweise

2.1 Verwendung

Add-ons (separat erhältlich)

Bis zu zwei Geräte

Kabelgebunden oder kabellos

Laden von Elektrofahrzeugen

DELTAPro Intelligenter Zusatzakku

EcoFlow Smart Generator

DELTA Pro Fernbedienung

EV X-Stream Adapter

Umgebungsbetriebstemperatur

Optimale Betriebstemperatur

Entladetemperatur

Ladetemperatur

Lagertemperatur

20°C bis 30°C (68°F bis 86°F)

-10°C bis 45°C (14°F bis 113°F)

0°C bis 45°C (32°F bis 113°F)

-10°C bis 45°C (14°F bis 113°F)

(optimal: 20°C bis 30°C (68°F bis 86°F))

La page charge ...

EcoFlow DELTA Pro Manuel utilisateur

Marque: EcoFlow

Modèle: DELTA Pro

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: EcoFlow DELTA Pro Manuale utente
español: EcoFlow DELTA Pro Manual de usuario
Deutsch: EcoFlow DELTA Pro Benutzerhandbuch
Nederlands: EcoFlow DELTA Pro Handleiding

EcoFlow DELTA Pro Manuel utilisateur

EcoFlow DELTA Pro Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents