Global Industrial 436977BK Manuel utilisateur

Taper
Manuel utilisateur
1
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
REF. DESCRIPTION PICTURE QTY
ALeg 2
BSupport
Tube 2
CEnd Slats 2
DSlats 3
ESupport
Ribs 2
FBolt 4
GSelf
Drilling
Screw
20
HScrew 14
IAllen Key 1
Warning
Assembly and installation of
equipment should be performed
by 2 people.
Workers should use OSHA
approved safety and lifting
equipment.
Warning
Ensure that the bench is
installed on a level surface.
Ensure surface is of a strong
material, preferably concrete.
Use proper mounting
hardware.
Warning
Do not climb on, under or
through tables and benches.
Two people required to move
tables and benches.
Do not use if any parts of
bench or table are broken or
damaged.
Inspect and tighten hardware
every six months.
Replace rusted hardware and
damaged components.
NOTE: Mounting hardware is
not included.
Models: 436977BK
Aluminum Park Bench
Without Backrest
2
Aluminum Park Bench
Without Backrest
Step 1:
Connect the 2 support tubes
(Ref. B) with both legs (Ref. A)
with bolts (Ref F). Do not fully
tighten.
Step 2:
Place both support ribs (Ref.
E) evenly spaced on top of the
support tubes.
Step 3:
Insert and connect both end
slats and slats (Ref. C and Ref. D)
in between the legs with screws
(Ref. H) on both ends. Do not
fully tighten.
Step 4:
Flip bench over and screw down
the support ribs with the self
drilling screws (Ref. G). Flip
bench with legs down and fully
fasten all screws
NOTE: Mounting hardware is
not included.
User Manual
  • Page 1 1
  • Page 2 2

Global Industrial 436977BK Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues