Body Fat Analyzer

The body composition consisting of the human body is divided into four : body water, protein, minerals,

and fat. This Body Fat Analyzer measures resistances when electric current flows through the human

body to estimate body composition (Bioelectrical Impedance Analysis (BIA)). Containing water that

conducts electricity well, muscles have low resistances; on the other hand, fat contains no water, having

high resistances. Based on these differences, body composition is measured, and the measured

information is provided by the app.

This product can be used with mobile devices.( iPhone 5S iOS 9.0 or later / Adroid OS 4.3.3 or later)

Safety Precautions When Measuring Body Composition

since waking up.

4. In order to avoid errors caused by food, please measure while fasting before a meal or two hours after

a meal.

5. Please measure after discharging feces and urine.

6. Measure before doing exercise or action that may reduce body water.

7. If you measure after extreme exercise or at high body temperature, the measurement result may

change.

8. If you move or talk while measuring, the measurement result may change.

9. Please stand up for about five minutes before measuring body composition and sit without putting

armpit and thigh on the body for the measurement.

1. Before Using IoT Body Composition Measuring Instrument

1) Please download Kuvigns Body Composition Measurement app at the App Store.

2) Once installed, run the app, create your user profile.

3) Button on the back of the device, check for LED illumination. And sync the

product and your smart phone.

4) Connect the app with your mobile phone and push button on the back of the device

to pull out embedded measuring instrument.

2. Using IoT Body Composition Measuring Instrument

1) Make sure your mobile phone and the app are connected.

2) Extend your arms to hold four electrodes correctly with your thumb and index fingers.

1) Please stand up for about five to ten minutes, and then sit for the measurement.

2) In order to avoid errors caused by food, measure while fasting before a meal or two hours after a

meal.

3) Please don’t move or speak while measuring.

* How to Manage the Instrument

- Please make sure the electrodes of the instrument are not stained with foreign substance.

(If there is any foreign substance on the device, remove it with a dry cloth before using.)

Directions for Body Composition Measurement

1. Consult with an expert first if you consider a diet/exercise program for the purpose of weight loss.

2. Do not use the measuring instrument near a device that generates and uses strong electromagnetic

5. Please do not take measurement while pregnant or suspected to be pregnant or during menstruation.

6. This product may affect pacemaker, ECG-related medical appliances, artificial heart, heart-lung

machine and other medical devices. Thus, do not use this product if you are using one of those devices.

7. Do not use the instrument for the elderly or the physically and mentally weak.

8. Do not use the measurement instrument for purposes other than the specified.

9. Please use mobile devices (iPhone 5S iOS 9.0 or later / Adroid OS 4.3.3 or later) for the body

composition measurement through the product.

SPECIFICATIONS

Product : Body Fat Analyzer

Model : BFA-1, BFA-2

and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation

of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts

de licence.

L’exploitation est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.