Krups EA891C50 Manuel utilisateur

Marque: Krups

Modèle: EA891C50

Catégorie: Accessoires de préparation de café

Taper: Manuel utilisateur

www.krups.com

EN US KRUPS ELITE SERVICE HOTLINE: 800-526-5377

FR LIGNE SANS FRAIS: 1 800 418 3325

ES HOTLINE: (01800) 112 8325

8020005298 - 06.2020- Réalisation : Espace graphique

www.krups.com

SUPER AUTOMATIC

SERIES EA89

ENFRES

8020005298

25 26 27

29 30 31

34 35 36

HOW TO CLEAN THE MILK SYSTEM

8020005298

Lorem ipsum

600 ml

MACCHIATOMACCHIATO

21 22 24

17 18 19 20

13 14 15 16

9 10 11 12

5 6 7 8

1 2 3 4

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed to reduce the risk of ﬁre, electric

shock, and/or injury to persons including the following:

Read all instructions.

Do not touch hot surfaces. Use handles or knobs.

To protect against re, electric shock and injury to persons, do not

immerse cord, plugs or machine in water or other liquid.

Close supervision is necessary when any appliance is used by or

near children.

Unplug from outlet when either the appliance or display clock is not

in use, and before

cleaning. Allow to cool before putting on or taking off parts, and

before cleaning the appliance

Do not operate any appliance with a damaged cord or plug or after

the appliance malfunctions, or has been damaged in any manner.

Return appliance to the nearest authorized service facility for

examination, repair or adjustment.

The use of accessory attachments not recommended by the

appliance manufacturer may result in re, electric shock or injury to

persons.

Do not use outdoors.

Do not let cord hang over edge of table or counter, or touch hot

surfaces.

Do not place on or near a hot gas or electric burner, or in a heated

oven.

Always attach plug to appliance rst, then plug cord into the wall

outlet. To disconnect, turn any control to the “off” position, then

remove plug from wall outlet.

Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

Children should be supervised to ensure that they do not play with

the appliance.

Your appliance is designed for domestic use only.

It is not intended to be used in the following applications, and the

guarantee will not apply for: staff kitchen areas in shops, ofces

and other working environments; farm houses; by clients in hotels,

motels and other residential type environments; bed and breakfast

type environments.

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible

for their safety.

The appliance shall not be placed in a cabinet when in use.

Scalding may occur if the lid is removed during the brewing cycles.

CAUTION

This machine is intended for household use only. Any servicing other than cleaning and user

maintenance should be performed by the nearest authorized Krups Service Center. Visit

our website at www.krupsusa.com in the USA or www.krups.ca in Canada or contact your

respective country’s Consumer Service department for the service center nearest to you, or

contact your respective country’s Consumer Service department. To reduce the risk of re

or electric shock, do not attempt to disassemble the machine.

Repair should be done by an authorized Krups Service Center only.

SHORT CORD INSTRUCTIONS

A. A short power cord or a detachable power cord is provided to reduce the risks of

becoming entangled in or tripping over a longer cord accidentally.

B. Longer detachable power cords or extension cords are available and may be used if

care is exercised in their use.

C. If a long detachable power cord or an extension cord is used:

1) the marked electrical rating of the detachable power cord or extension cord

should be at least as great as the electrical rating of the appliance.

2) If the appliance is of the grounded type, the extension cord should be a

grounding type 3-wire cord.

3) the longer cord should be arranged so that it will not drape over the counter

where it can be pulled on by children or tripped over accidentally. The

appliance may have a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to t into a polarized

outlet only one way. If the plug does not t fully into the outlet, reverse the

plug. If it still does not t, contact a qualied electrician. Do not attempt to

modify the plug in anyway.

Dear Customer,

Congratulations! You are now the proud owner of your Super Automatic EA89 Series.

This new product offers more than 14 hot drinks: espresso, double espresso, coffee, double coffee, ristretto, doppio,

Americano, cappuccino, double cappuccino, latte, double latte, frothy milk, green tea, black tea and herbal tea.

In addition to this very large choice, the machine offers many opportunities for customizing drinks, for example, you

can use a function that will increase the intensity of your coffee, if you prefer a more full-bodied drink. You can also

set the amount, strength and temperature of your drinks.

The most frequently consumed drinks are accessible with one simple touch on the main interface. As for the screen,

it allows you to follow the progress of your drinks and provides easy access to the different menus.

Most drinks can be prepared in batches of two to save time.

Thanks to its KRUPS Quattro force technology, including a Compact Thermoblock System with built-in percolation

chamber, its 15 bar pump, and because it uses coffee beans which have been freshly ground just before making the

coffee, your machine will serve you hot ristrettos, espressos and coffees from the rst cup with maximum aroma and

a creamy golden-brown froth.

To give the drink maximum avor, an espresso is traditionally served in a small, ared porcelain cup. For an optimum

temperature espresso and a dense creamy froth, we recommend that you pre-heat your cup.

You will probably need to try several types of coffee before you nd the one that suits you. By experimenting with the

blend and/or roast, you will eventually arrive at the ideal result.

Espresso coffee has a richer aroma than classic lter coffee. Despite its stronger taste, which remains longer on the

palate, an espresso contains less caffeine than lter coffee (around 60 to 80 mg per cup compared to 80 to 100 mg

per cup) due to its shorter percolation period.

The quality of water used is another determining factor which affects the overall quality of the brewed coffee. You

should ideally use water which is fresh from the tap (so that it has not had time to stagnate due to air contact), which

is cold and which does not smell of chlorine.

The tactile, ergonomic and comfortable buttons make it easy for you to browse the menu. You will be guided through

each step, from preparing your drink to servicing your machine.

We wish you many years of enjoyment with your Krups machine.

The Krups team

To get the most out of your machine and obtain good quality coffee, here is some advice:

• The quality of your water signicantly inuences the quality of the avors. Limescale and chlorine can

alter the taste of your coffee. We recommend that you use the Claris Aqua Filter System cartridge or low

mineral-content water to preserve all of the avors of your coffee.

• When preparing exclusively coffee recipes, we recommend that you use tulip-shaped porcelain cups,

preheated beforehand (by running them under hot water, for instance), and of a size appropriate to the

quantity you want to make. For your milk-based preparations, we recommend that you use thick glass

cups for an appetizing result.

• Roasted coffee beans can lose their avor if they are not protected. We recommended that you use the

amount of beans required for your consumption for the next 4-5 days. Although the quality of coffee

beans is subjective and varied, we do recommend that you use arabica rather than robusta.

• Lastly, please remember that oily and caramelized coffee beans must be avoided, as they can damage

your machine.

• The quality and neness of the grinding determine the strength of the avors and the quality of the cream.

The ner the beans are ground, the richer the cream. Indeed, grinding should be adapted to the drink

desired: ne for ristretto and espresso, coarser for coffee.

• You can use pasteurised or UHT, skimmed, semi-skimmed or whole milk, straight from the refrigerator

(44.6°F). Using special milks (microltered, raw, fermented, enriched, etc.) or vegetable milks (rice,

almond milk, etc.) can produce less satisfactory results especially when it comes to the quantity and

quality of the froth.

CONTENTS

IMPORTANT INFORMATION CONCERNING THE APPLIANCE AND INSTRUCTIONS ........p. 6

TECHNICAL DATA

...........................................................p. 6

APPLIANCE DESCRIPTION

...................................................p. 7

OVERALL VIEW

.............................................................p. 7

USING YOUR APPLIANCE

INSTALLING THE APPLIANCE

................................................p. 8

BEFORE PREPARING DRINKS

IMPORTANT INFORMATION

..................................................p. 9

PREPARING COFFEE DRINKS VIA DIRECT ACCESS

............................p. 10

PREPARING MILK BASED DRINKS VIA DIRECT ACCESS

........................p. 10

PREPARING TEAS

...........................................................p. 11

PREPARING OTHER DRINKS: RISTRETTO, DOPPIO, AMERICANO OR FROTHY MILK ......p. 11

OTHER FUNCTIONS

.........................................................p. 12

GENERAL MAINTENANCE

....................................................p. 13

TROUBLESHOOTING

........................................................p. 15

IMPORTANT INFORMATION CONCERNING THE APPLIANCE AND INSTRUCTIONS

In this manual you will nd all of the important information concerning the preparation, use and maintenance of your

machine.

Read the instructions carefully before using your appliance for the rst time and keep them for future reference: KRUPS

may not be held liable in the event of any use that does not comply with the instructions.

GUIDE TO THE SYMBOLS USED IN THE INSTRUCTIONS

Warning: Risk of serious injury or death. The lightning bolt symbol warns against electrical dangers.

Warning: Risk of possible malfunction, damage, or destruction of the appliance.

Warning: General or important note concerning the operation of the appliance.

Products included with your machine

Check the products included with your machine. If any parts are missing, contact your hotline (see p. 22: Initial settings).

Parts supplied:

- Super Automatic Series EA89

- 2 cleaning tablets

- 1 descaling sachet

- Milk conduit adaptable to the “One Touch Cappuccino” block

- Dismantling key for cleaning the steam circuit

- Safety instructions booklet

- Claris – Aqua Filter System cartridge with tting accessory

- 1 stick for testing water hardness

- Instructions

- List of approved Krups service centers

- Guarantee documents

TECHNICAL DATA

Appliance Super Automatic Series EA89

Power supply 120 V - / 60 Hz

Pump pressure 15 bars

Coffee bean container 250 g

Power consumption During operation: 1,450 W

Water tank 2.3 L

First use and storage Indoors, in a dry place (protected from frost).

Dimensions (mm) H x L x D 367 x 240 x 380

Weight EA89 (kg) 8.4

Subject to technical adaptations.

APPLIANCE DESCRIPTION

A Water tank lid handle

B Water tank

C Coffee grounds collector

D Height-adjustable coffee outlets

E Grid and removable drip tray

F Coffee bean container lid

G One Touch Cappuccino removable block

G1 Dismantling key for cleaning the steam

circuit

G2 One touch cappuccino block

H Milk tube and connector

I Water level oat

Coffee bean container

J Grinding neness adjustment dial

K Cleaning tablet funnel

L Metal grinding mill

Display panel

M Display

N “On-off” button

O Selector buttons

Speciﬁc information about:

The drip tray: it allows you to collect water or coffee that might ow out of the appliance during and after preparation.

It is important to always leave it in place and to empty it regularly.

Important : Read these instructions carefully and keep them for future reference. Please follow the safety guidelines.

Manufacturer:

SAS GSM

Rue Saint-Léonard F-53104 Mayenne

France

OVERALL VIEW

Explanation of the different buttons

Button Description / General functions

Switching the machine on and off.

It is necessary to press and hold the button to start the machine.

Allows you to return to the previous screen or stop a recipe in progress.

Browse upwards in the menu

Browse downwards in the menu

Conrmation of selection.

Function for increasing the strength of the coffee.

Function for adding a strong espresso to the recipe selected.

Accessible with the main recipes (espresso, long coffee, cappuccino, Macchiato, tea) according

to model.

Starts preparing an espresso.

Starts preparing a Coffee.

Starts preparing a Cappuccino

MACCHIATO

Starts preparing a Macchiato (a large measure of milk, a shot of Espresso, topped with frothy

milk foam).

Provides access to the menu for preparing a tea or a herbal tea.

Provides access to additional preparations: Ristretto, Frothy milk, Doppio, Americano, (according

to model).

Provides access to the general menu (machine settings, cleaning and product information).

Speciﬁc information about the illumination of the buttons

When a button is not illuminated, the corresponding function is inaccessible.

When it is slightly illuminated, the function is available and can be selected.

While the function requested is in progress, the light becomes very bright.

USING YOUR APPLIANCE

INSTALLING THE APPLIANCE

Warning: Connect the appliance to an grounded 230 V outlet. Failure to do so means that you run the risk of fatal

injury due to electricity!

Respect the safety guidelines indicated in the “Safety guidelines” booklet.

Switching ON the appliance

Switch on the appliance by pressing the ON/OFF button until “Hello” appears on the screen Fig. 1. Follow the

instructions provided by your appliance.

Initial settings

When using the machine for the rst time, you will be prompted to congure various settings. Follow the instructions

displayed on the screen. The aim of the following paragraphs is to give you a few visual cues.

Here are the rst settings required:

Language

Select a display language by pressing the arrows until the language of your choice appears. Press “OK” to conrm.

Measuring unit

You can set the unit of measurement for volume to ml or oz.

Date and time

To set the time, press the desired time format (24 hours or AM/PM).

Auto-off

It is possible to program the time at which you want your machine to switch on automatically. This setting can be

adapted as you wish: daily, weekly or weekend. Select the time at which you want it to start automatically following

the time format selected earlier.

You can also select the length of time after which your appliance will switch off automatically in order to optimize your

energy consumption.

Rinsing the coffee circuit

You can choose to activate it or not when switching on the machine. This allows you to ensure the quality of the coffee

in the cup in order to avoid the presence of residue.

Filter installation

When switching on for the rst time, the appliance asks if you want to install the lter. If you wish to do so, and if the

hardness of your water requires it, select “YES” and follow the instructions on the screen.

Installing the cartridge in the appliance: Screw the lter cartridge into the bottom of the water tank using the

accessory supplied with the cartridge. Fig. 4

Set the month when the cartridge is installed (position 1 on the illustration, left side gure in the opening) by turning

the grey ring located on the upper end of the lter. The month when the cartridge should be replaced is indicated in

position 2 on the illustration. Fig. 5.

Put a container of 0.6 L under the steam exit. Fig. 6.

The machine must be primed whether the lter has been installed or not. This means that the water circuits have to

be lled. To do this, follow the instructions provided on the screen. The machine will begin by lling the water circuits,

preheating the circuits and then it will complete an automatic rinse.

The screen will inform you when installation is complete.

Water hardness

You must set your machine depending on the hardness of your water, from 0 to 4. To do this, follow these instructions:

Before using the appliance for the rst time, check the hardness of your water so that you can set the appliance

accordingly. This operation should also be carried out when you use your machine in a place where the hardness of

the water is different or if you notice a difference in the hardness of the water. To check the water hardness, use the

test strip supplied with your machine or contact your local water authority.

The details of the classes are given in the table below:

Degree of hardness

Class 0

Very soft

Class 1

Soft

Class 2

Average hardness

Class 3

Hard

Class 4

Very hard

° dH < 3° > 4° > 7° > 14° > 21°

° e < 3,75° > 5° > 8,75° > 17,5° > 26,25°

° f < 5,4° > 7,2° > 12,6° > 25,2° > 37,8°

Appliance setting 0 1 2 3 4

Fill a glass of water and insert a strip. Fig. 2

After 1 minute read the level of water hardness. Fig. 3

Indicate the number of red zones when conguring the appliance.

Preparing the appliance

Remove and ll the water tank. Fig. 7.

Replace the water tank. Fig. 8.

Remove the lid of the coffee bean container and add coffee beans (max. 250 g). Fig. 9.

Replace the lid of the coffee bean container. Fig. 10.

BEFORE PREPARING DRINKS

IMPORTANT INFORMATION

Depending on the drinks chosen, your Espresso Automatic EA89 will automatically adjust the quantity of ground

coffee.

Preparing the grinder

You can adjust the strength of your coffee by adjusting how nely the coffee beans are ground. In general, the ner

the coffee is ground, the stronger and creamier the coffee will be. It may also vary according to the type of coffee

used. We recommend a ne setting for espressos and a coarser setting for coffees.

Adjust the neness of grinding by turning the coffee grounds neness adjustment knob (J) which is located in the

coffee bean container. This setting should be applied during grinding notch by notch. After 3 rounds, you will notice

a pronounced difference in taste.

Setting the neness of grinding is useful when you change the type of coffee or if you want to make coffee that is

more or less strong. However, it is not advised to use this setting systematically.

Adjusting the coffee outlet

For all the drinks available, you can lower or raise the coffee outlets according to the size of your cup or glass. Fig.11

Stopping a drink during preparation

You can stop the preparation at any time by pressing the return button .

Caution, pressing this button causes the machine to update which may last up to 30 seconds. This phase is normal.

When a cycle is interrupted, it does not stop immediately. The machine will nish its cycle and the preparation will be

cancelled.

“Double” preparation function

You can prepare two cups simultaneously with your appliance. The double preparation function can be accessed simply

by pressing the selection twice and is valid for all drinks (except and ).

DARK function

The “DARK” function allows you to increase the intensity of the coffee (its strength).

You can activate or deactivate it in various ways:

- Before selecting the chosen drink just press DARK.

- While preparing the drink, and until the end of grinding: you can press DARK.

- By choosing the “DARK” parameter in the Settings menu. To do this, access the Settings menu with the button

, then Settings  drink settings  Dark. The function will be activated for all “coffee” drinks: , , , .

You can do the same to deactivate it.

EXTRA SHOT function

The “extra shot” function allows you to add an espresso at the end of the selected drink.

You can activate or deactivate it in various ways:

- Before selecting the chosen drink: just press EXTRA SHOT.

- While making the drink,

- By choosing the “EXTRA SHOT” parameter in the Settings menu. To do this, access the Settings menu with the button

, then Settings  drink settings EXTRA SHOT. Therefore, the function will be activated for all preparations

, , , , .

You can do the same to deactivate it.

PREPARING COFFEE DRINKS VIA DIRECT ACCESS

N.B.: Every time the drink is launched, the machine will remember the last drink prepared, including the settings that

were selected.

Preparation

Place the cup(s) under the coffee nozzles. Fig.12

Press the button for the desired drink.

If the machine detects a lack of water when you request this preparation, it will ask you to ll the tank.

Possible settings

It is possible to increase the strength of the coffee by pressing and/or adding a coffee preparation by pressing .

You can prepare one or two cups with your appliance.

The machine starts by grinding the beans, tamping the ground coffee and nally brewing the coffee. It is possible to

adjust the volume of the coffee being prepared by using the buttons: and .

You can stop the preparation at any time by pressing .

Important: Automatic rinsing of the coffee outlets: according to the type of preparation, the machine may

complete an automatic rinse program when it switches off. The cycle lasts only a few seconds

and stops automatically.

PREPARING MILK BASED DRINKS VIA DIRECT ACCESS

Possible settings

It is possible to increase the strength of the coffee by pressing and/or adding a coffee preparation by pressing .

The steam is used to froth the milk. As a higher temperature is required when producing steam, the appliance will run

an additional pre-heating phase.

Making a Cappuccino or a Macchiato

Connect the straight side of the milk tube to the “One Touch Cappuccino” block Fig. 13.

Immerse the other end (bevelled side) in a receptacle lled with milk or directly in your bottle of milk Fig. 14.

Place the cup(s) under the coffee/milk nozzles. Fig.15.

Press the “Cappuccino” button Fig. 16 or press the « Macchiato » button Fig. 18. All of the settings can

be modied.

The preparation starts by frothing the milk (possible to set the time), and then the coffee ow (possible to adjust the

volume). Adjusting the frothing time allows you to vary the quantity of milk and froth.

The next steps follow automatically and your drink is ready to taste Fig.17.

Every time “Cappuccino” or « Macchiato » is run, the machine will remember the last drink prepared, including the

settings that were selected.

Cleaning after preparing milk based drinks

Milk rinsing

The screen indicates “Rinse milk?” at the end of each preparation.

It is advised to rinse after using the milk function in order to ensure the cleanliness of the frothing accessories and

the frothiness of the milk.

During milk rinsing, you are required to systematically dismantle and clean the milk tube and connector with hot

water. Fig. 21 and 25.

For the best results, it is advised to clean the “One Touch Cappuccino” removable block regularly (see general

maintenance chapter).

If you note a change in the quality of your milk froth, do not hesitate to repeat the rinsing and cleaning process: indeed

a milk system that is not well maintained may cause this type of problem.

PREPARING TEAS

Possible settings

Your appliance allows you to prepare three types of tea (green tea, black tea, herbal tea). You can adjust the volume

of the drink to taste.

The hot water temperature is adapted to the drink selected.

You can program an extra shot in your tea which will allow you to prepare “tea/coffee” drinks that are very

popular.

Preparing a tea

Select on the screen. Place the cup(s) under the coffee nozzles. Fig.12

Then select the chosen drink and press .

If the machine detects no water when you submit your request, it will ask you to ll the tank.

You can modify the volume by using buttons or during preparation.

PREPARING OTHER DRINKS: RISTRETTO, DOPPIO, AMERICANO

OR FROTHY MILK

Preparation

Place the cup(s) under the coffee nozzles. Fig.12

If the machine detects no water when you submit your request, it will ask you to ll the tank.

Press button : with buttons and , select the desired drink: Ristretto, Doppio, Americano, Frothy milk.

Making a Ristretto

Select Ristretto and press .

The machine starts by grinding the beans, tamping the ground coffee and nally brewing the coffee. It is possible to

adjust the volume of the coffee being prepared by using the buttons: and .

You can stop the preparation at any time by pressing .

Making a Doppio

Select DOPPIO and press .

The preparation is identical to the RISTRETTO but with a double coffee cycle.

Making an Americano

Select AMERICANO and press .

The preparation is identical to the DOPPIO, but is followed by hot water.

Making a Frothy milk

Connect the straight side of the milk tube to the “One Touch Cappuccino” removable block Fig. 13. Immerse the other

end (bevelled side) in a receptacle lled with milk. Fig.14

The steam is used to froth the milk. As a higher temperature is required when producing steam, the appliance will

launch an additional pre-heating phase.

A menu will allow you to customize the frothing time. You can modify it by pressing buttons or . Then press

. The last frothing time used will be memorized for the next preparation.

You can download the preparation at any time by pressing .

Rinsing the “One Touch Cappuccino” block

Please refer to the paragraph “Milk rinsing” in the section PREPARING ONE TOUCH MILK DRINKS.

OTHER FUNCTIONS

The Settings menu can be accessed via button which leads to the general menu (machine settings maintenance

and product information).

Settings

By selecting the Settings menu, you can make the changes you want in order to optimize your ease of use and suit

your preferences.

Below are the main settings available.

Date You must set the date, particularly when you are using an anti-limescale cartridge.

Clock You can select to display a 12 or 24-hour clock.

Language You can select the language of your choice from those offered.

Measuring unit You can set the unit of measurement to be ml or oz.

Screen brightness You can adjust the screen brightness according to your preferences.

Coffee temperature You can adjust the temperature of your coffee drinks to three different levels

Tea temperature You can adjust the temperature of your teas to three different levels

Water hardness You can set your water hardness from 0 to 4. See chapter “Measuring water hardness”.

Auto-on You can automatically start pre-heating of the appliance at a selected time.

Auto-off

You can choose the duration after which your appliance will switch off automatically

(duration of non use).

Automatic rinsing

You can choose to activate automatic rinsing of the coffee outlet or not when starting

the machine.

Drinks settings

You can restore the default settings. You can also permanently activate the Dark and

Extra Shot function for all your drinks (except ).

To quit the settings menu, press or the Settings button.

The settings will be stored in the memory if you unplug your machine, with the exception of the date and time.

Maintenance

All of these options allow you to run the selected programs. You should then follow the on-screen instructions.

Cleaning milk

Provides access to cleaning the machine’s one touch cappuccino block, which is essential

for ensuring good quality milk frothing.

Milk rinsing

Provides access to rinsing the machine’s one touch cappuccino block, which is essential for

ensuring good quality milk frothing.

Coffee rinsing

Provides access to rinsing the machine’s coffee circuit, which ensures the optimum taste

of coffee.

Coffee cleaning

Provides access to cleaning the machine’s coffee circuit (using a cleaning tablet), which

ensures the optimum taste of coffee.

Descaling

Provides access to descaling which is essential for the durability of your machine. When the

number of drinks is not high enough for descaling to be necessary, the function is not active.

Filter

Provides access to the lter mode, useful if the water is very hard, in order to ensure the best

taste and the health of your machine.

To quit the Cleaning menu, press or the Settings button.

Info

The “Info” menu provides access to information about your use and about certain stages in the life of your machine. It

also informs you about its upkeep. Below are the main details available.

Drinks prepared Displays the number of drinks prepared

Coffee circuit cleaning Indicates that is needs to be completed within x number of cycles.

Descaling Indicates that is needs to be completed within x number of cycles.

Filter Indicates that it will need to be changed in x days or x liters.

To quit the Info menu, press or the Settings button.

GENERAL MAINTENANCE

Emptying the coffee grounds collector and the drip tray

After a certain number of drinks, the machine will ask you to empty the coffee grounds collector and the drip tray. Not

following these instructions can damage your machine.

The drip tray collects used water and the coffee grounds collector collects used ground coffee.

If the message “Please empty the two trays” is displayed, remove, empty and clean the drip collector tray. Remove,

empty and clean the coffee grounds collector (C). Fig. 19.

Replace the coffee grounds collector. Fig. 20

The drip tray is equipped with a oat to indicate when it needs emptying. However, the machine is also programmed to

ask for the drip collector tray to be emptied after a certain number of drinks, in addition to any intermediate emptying

operations that you may complete.

Rinsing the circuits:

You can start rinsing at any time by pressing and selecting Maintenance.

According to the type of recipe prepared, the machine may complete an automatic rinsing when it is turned off.

It is also possible to set an automatic rinse program when it is switched on (see “Settings” section p.22).

Automatic cleaning programs

Automatic cleaning program of the coffee circuit

A message on the screen will indicate when a cleaning program needs to be run for the appliance.

To run this cleaning program, you will need a container which holds at least 0.6 L, and which should be placed beneath

the coffee outlets and the steam nozzle, and a KRUPS cleaning tablet. Fig. 37. Carefully follow the instructions given

on the screen. It is also possible to run a cleaning cycle via the Maintenance menu.

Important: You do not have to run the cleaning program as soon as the appliance requests it, but it must be done

reasonably soon after. If cleaning is postponed, the alert message will remain illuminated until the

process is completed.

The automatic cleaning program comprises two phases: a cleaning cycle and a rinsing cycle, and lasts about 13

minutes.

Important: If you unplug your machine during the cleaning cycle, or if there is a power failure, the cleaning program

will continue from the current phase when the power is returned. It is not possible to postpone this

process. This is essential to ensure that the water circuit has been correctly rinsed. In this case, a new

cleaning tablet may be necessary. Complete the full cleaning program in order to remove all of the

cleaning product which is harmful to health.

Cleaning the “One Touch Cappuccino” block

To complete a cleaning program, you will require two containers (minimum 0.6 L) and KRUPS cleaning liquid.

You can start the cleaning cycle by pressing button .

Then selecting “Maintenance”  “Milk Cleaning”. Follow the instructions on the screen.

Dismantling the “One Touch Cappuccino” block

In addition to rinsing, it is necessary to clean the different elements of the block every time after using. To dismantle

the block, follow the following instructions:

Remove the milk tube, Fig. 21.

Remove the front lid of the coffee milk nozzles. Slide it downwards and pull it towards you. Fig. 22.

Remove the “One Touch Cappuccino” block by pulling the upper part of the block and pull the orange cleaning tool.

Fig. 23.

Completely dismantle the block. Fig. 24.

Remove the milk tube connector Fig. 27.

Clean all of the dismantled parts (block, connector and milk tube) with soapy water. Then rinse them in hot water.

Fig. 28-30.

Once the elements are clean and dry, assemble the block and return them to their original position. Fig. 33.

Replace the font lid of the block. Fig. 34. Replace the connector in the milk tube Fig. 35 (opposite side of the bevelled

side) and plug in the block. Fig. 36.

Automatic descaling program of the steam circuit

Warning: if your appliance is tted with our Claris - Aqua Filter System cartridge, remove the cartridge before

descaling.

A message on the screen will indicate when a descaling program needs to be run for the appliance. The frequency of

this program depends on the quality of the water used and on whether a Claris Aqua Filter System lter is used or not

(the harder the water, the more often the appliance has to be descaled).

Important: You are not obliged to carry out this program immediately the appliance requests it, but it must be

carried out reasonably soon afterwards. If descaling is postponed, the alert message will continue to

be displayed until the process is completed.

When the descaling alert level is reached and displayed, press to run the descaling program. To delay it, press .

Once the procedure has been launched, follow the instructions provided on the screen. It is also possible to run a

descaling cycle via the “Maintenance” menu  “Descaling”.

To carry out a descaling program, you will require a container with a capacity of at least 0.6 L which should be placed

beneath the One Touch Cappuccino block and a KRUPS descaling sachet (40 g). Fig. 37.

Fill the water tank up to the CALC mark then pour in the contents of one sachet of descaler.

The descaling program contains three cycles: a descaling cycle and two rinsing cycles. The program lasts approximately

20 minutes.

Important: If there is a power failure or if you unplug your machine, the cycle will continue from the current phase

when the power is returned. It will not be possible to cancel this operation. Complete the full cycle in

order to remove all of the descaling product which is harmful to health.

TROUBLESHOOTING

If one of the problems described in the table persists, contact KRUPS customer service.

PROBLEM CORRECTIVE ACTION

The machine displays a failure,

the software freezes or your

machine has a malfunction.

Switch off and unplug the appliance, remove the lter cartridge, wait for one

minute and start the appliance again.

Press and hold the on/off button for at least 3 seconds before starting.

The appliance does not switch

on when the ON/OFF button is

pressed (for at least 3 seconds).

Check your fuses and outlets.

Check that the two power plugs are correctly inserted into the socket.

The coffee grinder makes a

strange noise.

There is a foreign body in the grinder.

Contact the KRUPS Customer Service team.

The One Touch Cappuccino

block does not suck the milk.

The One Touch Cappuccino

blocks produces little or no froth.

Check that the block is assembled correctly (in particular the connector in the

milk tube).

Ensure that the steam nozzle is not blocked. If this is the case, see below “The

steam nozzle on your machine seems to be partially or completely blocked”.

Check that the connector is not blocked or dirty; soak it in a mixture of hot water

and dishwashing liquid, then rinse and dry before reassembling.

Ensure that the exible pipe is not blocked or twisted and that it is properly inserted

into the One Touch Cappuccino block in order to avoid any air leaks. Check that

it is fully immersed in the milk.

Rinse and clean the block (see chapters concerning rinsing and cleaning the One

Touch Cappuccino block).

For milk drinks, we recommend that you use fresh, pasteurised or UHT milk which

has been recently opened. It is also advisable to use a cold container.

The steam nozzle on your

machine seems to be partially or

completely blocked.

Dismantle the nozzle from its support using the dismantling key. Fig. 25.

Start the rinse cycle for the One Touch Cappuccino block to remove any

remaining deposits.

Clean the steam nozzle and ensure that the opening of the nozzle is not

obstructed by the remains of milk or limescale. Use the cleaning needle if

necessary. Fig. 26.

No steam comes out of the

steam nozzle.

Ensure that the steam nozzle is not blocked. See “The steam nozzle on your

machine seems to be partially or completely blocked.”

If this does not work, empty the water tank and remove the Claris cartridge

temporarily. Fill the water tank with mineral water with high calcium content

(>100 mg/l) and run steam cycles (5 to 10) consecutively into a container until

you obtain a continuous jet of steam.

Put the cartridge back in the tank.

Steam is leaking from the drip

tray grid.

Depending on the type of preparation, steam may escape from the drip tray

grid.

The machine asks for the drip

tray to be emptied although it is

not full.

The machine is programmed to ask for the drip tray to be emptied after a certain

number of coffees despite any intermediate emptying operations that you may

complete.

The appliance asks to be

unplugged and plugged back in

again.

Unplug the appliance for 20 seconds, remove the Claris Aqua Filter System

cartridge if necessary, then plug it back in again.

If the error continues, contact the KRUPS Customer Service team.

The machine does not request

descaling.

The descaling cycle is requested after the steam circuit has been used a

signicant number of times.

Some ground coffee has found

its way into the drip tray.

A small amount of ground coffee may settle in the drip tray. The machine is

designed to evacuate any excess ground coffee so that the percolation zone

remains clean.

The milk or water is not owing

correctly into the cup(s).

Check that the One Touch Cappuccino block is correctly positioned.

There are traces of milk in an

Americano or a Hot water.

Complete a milk rinsing cycle or dismantle and clean the one touch cappuccino

accessory before running the preparation.

There is water underneath the

appliance.

Before removing the water tank, wait for 15 seconds after the coffee has nished

owing so that the appliance nishes its cycle properly. Check that the drip tray

is correctly positioned on the machine; it should always be in place, even when

the appliance is not in use. Check that the drip tray is not full.

The drip tray should not be removed during a cycle.

When you turn off the appliance,

warm water ows out of the

coffee outlets and the One Touch

Cappuccino block.

According to the type of recipe prepared, the machine may run an automatic

rinsing cycle when it is turned off. This cycle lasts only a few seconds and stops

automatically.

After emptying the coffee

grounds collector, the warning

message is still displayed on the

screen.

Correctly replace the coffee grounds collector and follow the instructions on

the screen.

Wait at least 5 seconds before replacing them.

The coffee dispenses too slowly.

Turn the ‘neness of grind’ adjustment dial to the right to make the ground

coffee coarser (according to the type of coffee used).

Run one or several rinsing cycles.

Run a machine clean (see “Automatic machine cleaning programs p.28).

Change the Claris Aqua Filter System cartridge (see “Installing the lter”) p. 23).

The water tank has been lled,

but the warning message is still

displayed on the screen.

Check that the tank is installed correctly on the device.

The oat at the bottom of the tank should move freely. Check and unblock the

oat if necessary.

The coffee neness knob is

difcult to turn.

Only change the grinder setting when it is running.

The espresso or coffee is not hot

enough.

Run a coffee circuit rinsing cycle before preparing your coffee.

Increase the coffee temperature in the Settings menu. Warm the cup by rinsing

it with hot water before making the drink.

The coffee is too lightly colored

or too weak.

Avoid using oily, caramelized or avored coffee beans. Check that the coffee

bean container has coffee in it and that is it dispensing correctly.

Decrease the volume of the preparation and increase the strength of your drink

by using the Dark function.

Turn the grinding neness adjustment dial to the left to make the grounds ner.

Make the drink in two cycles by using the 2 cups function.

The appliance is not producing

coffee.

A problem has been detected during preparation of the drink.

The appliance has restarted automatically and is ready for a new cycle.

A power failure occurs during a

cycle.

The appliance will automatically restart when the power is switched back on.

Your tea is not hot enough or

too hot.

Increase or reduce the hot water temperature in the Settings menu.

You have used ground coffee

instead of coffee beans.

Use your vacuum cleaner to remove the ground coffee from the coffee bean

container.

Appearance of steam under the

lid of the grain tray.

Close the cleaning tablet chute beneath the cover.

After preparing a drink, if you ask

for an extra shot the machine

tells you that this is not possible.

The coffee grounds collector is full and the extra shot function is not available.

Once your drink has been made, you can prepare an espresso after emptying

the coffee grounds collector.

Danger : Only a qualied technician is authorised to carry out repairs on electrical wiring and carry out work on

the electrical grid. If you do not follow these instructions, you risk death by electrocution. Do not use

an appliance that is visibly damaged!

KRUPS INTERNATIONAL LIMITED GUARANTEE

: www.krups.com

This product is repairable by KRUPS during and after the guarantee period.

Accessories, consumables and end-user replaceable parts can be purchased, if locally

available, as described on the KRUPS internet site www.krups.com

The Guarantee:

This product is guaranteed by KRUPS (company address and details included in the country list of the KRUPS

International Guarantee) against any manufacturing defect in materials or workmanship for a period of 2 years starting

from the initial date of purchase or delivery date.

The international manufacturer’s guarantee by KRUPS is an extra benet which does not affect consumer’s Statutory

Rights.

The international manufacturer’s guarantee covers all costs related to restoring the proven defective product so that it

conforms to its original specications, through the repair or replacement of any defective part and the necessary labour.

At KRUPS’s choice, an equivalent or superior replacement product may be provided instead of repairing a defective

product. KRUPS’s sole obligation and your exclusive resolution under this guarantee are limited to such repair or

replacement.

Conditions & Exclusions:

The international KRUPS guarantee only applies within the guarantee period and for those countries listed in the country

list attached and is valid only on presentation of a proof of purchase. The product can be taken directly in person to an

authorised service centre or must be adequately packaged and returned, by recorded delivery (or equivalent method of

postage), to a KRUPS authorised service centre. Full address details for each country’s authorised service centres are

listed on KRUPS website (www.krups.com) or by calling the appropriate telephone number as set out in the country list

to request the appropriate postal address.

KRUPS shall not be obliged to repair or replace any product which is not accompanied by a valid proof of purchase.

This guarantee will not cover any damage which occurs as a result of misuse, negligence, failure to follow KRUPS

instructions, use on current or voltage other than as stamped on the product, or a modication or unauthorised repair

of the product. It also does not cover normal wear and tear, maintenance or replacement of consumable parts, or the

following:

- using the wrong type of water or consumable

- ingress of water, dust or insects into the product (excluding appliances with features specically designed for

insects)

- damage as a result of lightning or power surges

- mechanical damages, overloading

- scaling (any de-scaling must be carried out according to the instructions for use)

- accidents including re, ood, thunderbolt, etc

- damages or poor results due to wrong voltage or frequency

- damage to any glass or porcelain ware in the product

- professional or commercial use

This guarantee does not apply to any product that has been tampered with, or to damages incurred through improper use

and care, faulty packaging by the owner or mishandling by any carrier.

In order to offer the best possible after-sales service and constantly improve customer satisfaction, KRUPS may send a

satisfaction survey to all customers who have had their product repaired or exchanged in a KRUPS authorised service

centre.

The international KRUPS guarantee applies only for products purchased in one of the countries listed, and used for

domestic purposes only in one of the countries listed on the Country List. Where a product purchased in one listed country

and then used in another listed country:

a) The international KRUPS guarantee does not apply in case of non conformity of the purchased product with the

local standards, such as voltage, frequency, power plugs, or non conformity with other local legal requirements or

other local technical specications.

b) The repair process for products purchased outside the country of use may require a longer time if the product is

not locally sold by KRUPS

c) In cases where the product is not repairable in the new country, the international KRUPS guarantee is limited to a

replacement by a similar product or an alternative product at similar cost, where possible.

Consumer Statutory Rights:

This international KRUPS guarantee does not affect the statutory rights a consumer may have or those rights that cannot

be excluded or limited, nor rights against the retailer from which the consumer purchased the product. This guarantee

gives a consumer specic legal rights, and the consumer may also have other legal rights which vary from State to State

or Country to Country. The consumer may assert any such rights at his sole discretion.

For Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You

are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

*** Please keep this document for your reference should you wish to make a claim under the guarantee

La page charge ...

Krups EA891C50 Manuel utilisateur

Marque: Krups

Modèle: EA891C50

Catégorie: Accessoires de préparation de café

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Krups EA891C50 User manual
español: Krups EA891C50 Manual de usuario

Documents connexes

Autres documents

Tefal EA894810 Manuel utilisateur