Philips AZ3830/12 Manuel utilisateur

Catégorie
Lecteur CD
Taper
Manuel utilisateur
AZ3830MP3-CD Soundmachine
User Manual
Manuel d'utilisation
Manual del usario
Benutzerhandücher
Printed in China JH-0634
W
CLASS 1
LASER PRODUCT
AZ3830
Meet Philips at the Internet
http://www.philips.com
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 1
0
9
@
#
$
6
^
!
1
4
8
%
&
5
2
3
6
7
6 x R20 • UM-1 • D-CELLS
CD
AUX
SHUFFLE
REPEAT
PROG
DEL
DBB MUTE
ALBUM/
PRESET
VOL
TUNER
USB REC
USB
)*
7
5
4
§
@
(
£
¡
6
2
1
PREST FM
DBB
MP3
ALB
TRK
PROG
DBB
REP ALL SHUF
MP3
ALB
PROG
TRK
REC
REC
X
USB
USB
2
9
3
6
7
4
5
0
!
8
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 2
2
3
1
USB mass
storage device
USB cable
@
Supplied accessories
AC power cord
– Remote control
To p and front panels (See 1)
1 Display
shows the status of the set
2 USB REC
copy one file or all files of a disc
to an external portable USB
storage device/MP3 player
3
MODE – selects different play modes:
e.g. REPEAT or SHUFFLE (random order)
4
VOLUME/
VOL +/-
adjusts volume level
5 PROG
For disc
programs tracks and reviews the
program
For Tuner
auto searches and stores radio
stations
6 ALBUM/PRESET
+/- (
3, 4
)
For MP3-CD/ WMA/USB play:
select albums
For Tuner
selects a preset radio station
7 / opens/closes the disc tray
8 USB port connects an external USB mass
storage device
9 iR infrared sensor for remote control
0
AUX jack
connects an external source
(3.5 mm socket)
! p 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
@
2;
starts or pauses disc/USB playback
∞§
For disc
/ USB play:
skips to the beginning of a current/
previous/ later track
fast searches backwards and forwards
within a track
For Tuner:
tunes to a radio station
9
stops disc/USB playback;
erases a program
DBB turns on/off bass enhancement
#
POWER
powers on/off the system
$
SOURCE:
selects CD/MP3-CD, USB mode,
Tuner or AUX
Back panel (See 1)
% AC~ MAINS inlet for power cord
^ Telescopic antenna improves FM
reception
& Battery door opens to insert 6 x 1.5V
R-20/ -UM1/ D-cells
Remote control (See 1)
* CD – selects disc mode
( TUNER – selects tuner mode
) USB – selects USB mode
¡ AUX– selects AUX mode
DEL deletes one file or all files stored on
the external USB device
£ SHUFFLE turns on/off the random play
mode
REPEAT – repeats a track/disc/all
programmed tracks
DBB – turns on/off bass enhancement
§ MUTE –mutes or restores the volume
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries
Main set (See 1)
• Insert 6 batteries, type R-20, UM1 or D-
cells (not included, preferably alkaline) with
the correct polarity.
English Controls / Power Supply
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 3
Remote control
Important!
Before using the remote control, remove
the insulation plastic tab as shown
in figure @.
If the remote control does not function
correctly or the operating range is
reduced, replace the battery with a new
(CR2025) type battery.
1 Pull the battery tray out as shown
in figure @.
2 Replace a new battery according to polarity
indication, and fully insert the battery tray
back to the original position.
Incorrect use of batteries can cause
electrolyte leakage and will corrode the com-
partment or cause the batteries to burst:
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
When inserting new batteries, do not try to
mix old batteries with the new ones.
Remove the batteries if the set is not to be
used for a long time.
Batteries contain chemical substances, so
they should be disposed of properly.
Using AC power
1 Check if the power/mains voltage, as shown
on the type plate located on the
bottom of the set, corresponds to your
local power supply. If it does not, consult your
dealer or service center.
2 Connect the power cord to the
AC~ MAINS inlet and the wall socket.The
set is now ready for use.
3 To switch the set off completely, withdraw the
power cord from the wall socket.
4 Install the unit near the AC outlet and where
the AC power plug can be easily reached.
Disconnect the power cord from the wall
socket to protect your set during heavy thun-
derstorms. Children could seriously injure
themselves as the free end of the cable may
still be live if only the connector is removed
from the MAINS socket at the back of the
unit.
The type plate is located on the
bottom of the set.
Auto power saving
When the source selector is adjusted to
CD/USB and the set is in the PAUSE
position for 5
minutes, the set will be auto
switched to the stop position to save power.
When the source selector is adjusted to
CD/USB and the set is in the STOP position
for 15
minutes, the set will auto switch off.
Helpful hints:
–To avoid unnecessary energy consumption,
always press POWER on the set to power
off the set after using the set.
CAUTION
- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.
- High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
- Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
This set complies with the radio
interference requirements of the
European Union.
Power Supply
Basic functions
Switching on/off the set
1 To switch on, press POWER.
Display lights up.The system will switch to
the last selected source.
2 To switch off, press POWER again.
Display lights off.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
Digital tuner
Tuning to radio stations
1 Press repeatedly SOURCE (or TUNER
on the remote control) to select FM or
MW.
TUNER” is displayed briefly, then the
radio station frequency, waveband and, if
programmed, a preset number are shown
(See 2).
2 Press and hold or § until the frequency in
the display starts running.
The radio automatically tunes to a station
of sufficient reception. Display shows
SEARCH” during automatic tuning.
3 Repeat step 2 if necessary until you find the
desired station.
•To tune to a weak station, press or §
briefly and repeatedly until you have found
optimal reception.
To improve radio reception:
For FM, extend, incline and turn the tele-
scopic aerial. Reduce its length if the signal is
too strong.
For MW, the set uses a built-in aerial. Direct
this aerial by turning the whole set.
Programming radio stations
You can store 15 FM and 10 MW radio
stations in the memory manually or
automatically (Auto store).
Manual programming
1 Tune to your desired station (see Tuning to
radio stations).
2 Press PROG to activate programming.
Display: PROG flashes.
3 Press ALBUM/PRESET +/- (
ALBUM/PRESET
3, 4
on the remote
control ) once or more to allocate a number
(FM: from 1 to 15; MW: from 1 to 10).
4 Press PROG to confirm.
5 Repeat steps 1-4 to store other stations.
Helpful hints:
–You can erase a preset station by storing
another frequency in its place.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1 Press repeatedly SOURCE (or TUNER
on the remote control) to select FM or
MW.
2 Press PROG until “AUTO” flashes.
Available stations are programmed (MW
or FM). After all stations are stored, the
first autostore preset station will then
automatically play.
To listen to a preset or autostore
station
Press the ALBUM/PRESET +/- (
ALBUM/PRESET
3, 4
on the remote
control ) buttons once or more until the
desired preset station is displayed.
Basic Function/ Radio MP3-CD/ CD Player
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 4
About MP3
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
Getting MP3 files: you can either download
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
Creating a MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
– Make sure that the file names of the MP3 files
end with .mp3 or .wma.
– Number of albums: maximum 100.
– Number of tracks: maximum 999.
The length of file names affects the number of
tracks for playback.With shorter file names,
more files can be burned on a disc.
Playing a disc
This player plays Audio Discs including CD-R/
CD-RW, MP3 CD and WMA. Do not try to
play a CD-ROM, CD-I, CDV,VCD, DVD or
computer CD.
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
DRM-protected WMA disc is not supported.
1 Press repeatedly SOURCE (CD on the
remote control) to select CD source.
Display shows flashing “READ” if CD
source is selected (see 3).
“ NO CD” will be displayed if CD is not
loaded.
3 Press / to open the disc door.
4 Insert a disc with the printed side facing up
and press the disc door gently to close.
The disc scanning of MP3-CD may run
longer than audio CD.
Display:The total number of tracks
appears (and album number for MP3/WMA)
(see 4).
5 Press
2;
to start playback.
First the song title of the track scrolls
across the display, then the track number
and the elapsed playing time are displayed.
For MP3-CD/ WMA only:
The current track number (TRK) and
album number (ALB) will be displayed
interchangeably.
6 To pause playback press
2;
.
Display:
2
and the elapsed playing time
flash.
7 Press
2;
again to resume playback.
8 To stop playback, press
9
.
Helpful hints:
The disc playback will also stop when:
–you open the disc compartment door;
–you select FM, MW or AUX;
the disc has reached the end of the playback.
Selecting a different track
Press or § once or repeatedly until the
desired track number appears in the display.
For MP3-CD/WMA: First press
ALBUM/PRESET +/- ( ALBUM/PRE-
SET
3, 4
on the remote control ) once or
more to find your album.
In the pause/stop position, press 2; to start
playback.
MP3-CD/ CD Player
Finding a passage within a
track
1 During playback, press and hold down
or §
.
The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release
or §
.
Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press
or
§
to select
your desired track number.
For MP3-CD/WMA: First press
ALBUM/PRESET +/- ( ALBUM/PRE-
SET
3, 4
on the remote control ) once or
more to find your album.
2 Press PROG to store tdesired track.
Display shows “PRO 2 , indicating the
next program location available (See 5).
If you attempt to program without first
selectig a track, display will show “SELECT
TRARCK” briefly, then the total track number
and playing time.
3 Repeat steps 1 to 2 to select and store all
desired tracks.
4 Press
2;
to play the program.
“PROG” is dispalyed during program
playback.
To review your program
In the stop position, press and hold PROG 3
seconds.
The display shows all the stored tracks
(and album numbers for MP3) in sequence.
Helpful hints:
Display shows “PRO 1” if no track is
programmed.
If you try to store more than 20 tracks, no
track can be stored and the display will show
”PROGRAM FULL”.
To erase a program
You can erase a program by:
– pressing
9
(twice during playback or once
in the stop position);
– selecting FM, MWor AUX;
– pressing POWER to power off;
– opening the disc door.
“PROGRAM CLEAR” scrolls across the
display once, and “PROG” disappears.
Selecting different play
modes (See 6)
You can select and change the various play
modes before or during playback, and
combine play modes with PROG.
REP – plays the current track continuously.
REP ALL – plays the entire disc/program
continuously.
SHUF – plays all tracks in random order.
REP ALL SHUF – plays all tracks in
random order continuously.
1 To select play modes, press MODE on the
set (REPEAT or SHUFFLE on the remote
contorl) once or more.
2 Press 2; to start playback if in the stop
position.
Shuffle play will start automatically soon
after shuffle mode is selected.
3 To select normal playback, press MODE on
the set (REPEAT or SHUFFLE on the
remote control) repeatedly until the various
play modes are no longer displayed.
You can also press 9 to cancel your play
modes.
MP3-CD/ CD Player
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 5
MP3-CD/ CD Player USB Connection
Using USB connectivity
AZ3830 is fitted with a USB port in the front
panel, offering a plug and play feature which
allows you to play, from your AZ3830, digital
music and spoken contents stored on a USB
mass storage device.
Using a USB mass storage device, you can
also enjoy all the features offered by AZ3830
which are explained and instructed in the
sections of disc operation.
Compatible USB mass storage devices
With the AZ3830, you can use
USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USB device which requires driver
installation under Windows XP is not
supported.
Note:
In some USB flash players (or memory
devices), the stored contents are recorded
using copyright protection technology. Such
protected contents will be unplayable on any
other devices (such as AZ3830 device).
Supported formats:
USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 - 4096 bytes)
MP3 bit rate (data rate): 32-320 kbps and
variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums: maximum 100
Number of tracks: maximum 999
ID3 tag v2.0 or later
File name in Uicode UTF8 (maximum
length: 128 bytes
The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Non-supported file formats are skipped.
This means that e.g.: Word documents .doc
or MP3 files with extension. dlf are ignored
and will not be played.
AAC, WAV, PCM. NTFS audio files
• DRM protected WMA files
WMA files in Lossless format
Playing a USB mass storage device
1 Make sure that your AZ3830 is being
powered by AC mains or specified batteries.
2 Press repeatedly SOURCE (or USB on the
remote control) to select USB mode.
Display shows “USB”, indicating the set is
in USB mode (see 7).
3 As shown in figure @, plug a compatible USB
mass storage device to AZ3830’s USB port
marked . If needed, use a suitable USB
cable to connect between the device and
AZ3830’s USB port.
The device will automatically power on.
If the device is not powered on, turn on the
power manually, then re-connnect it.
AZ3830’s display shows USB and the total
number of playable audio files (Max.
displayed track number is 999) stored on
the device.
4 Press
2; on your AZ3830 to start play.
AZ3830’s display will show USB and share
the display information illustrated in the
disc operation.
Helpful hints:
– Make sure that file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit
www.microsoft.com for details about Windows
Media Player and WM DRM (Windows Media
Digital Rights Management).
USB Connection
CD Ripping - Recording disc
files to a USB device
AZ3830 allows you to copy the music files or
spoken contents of a disc to the external
USB device.You can record one track, the
whole disc or even selected tracks through
the Program function.
1 Press repeatedly SOURCE (or USB on the
remote contorl) to select USB mode.
2 Insert a disc (audio CD or MP3 or WMA). If
desired, program the disc.
3 Plug a USB mass storage device.
To r ecord one
4a Select the track you want to record.
4b
Press once or repeatedly USB REC until
“RIPPING ONE” appears, flashing.
Disc playback will start automactially from
the beginning of the selected track.
“REC” is displayed flashing, and “RIPPING
ONE” will flash 2 seconds, then disappear
(see 8).
To r ecord all
4a Press repeatedly USB REC until “RIPPING
ALL appears, flashing.
Disc playback will start automatically from
the beginning.
“REC” and “ALL are displayed flashing, and
“RIPPING ALL will flash 2 seconds, then
disappear (see 9).
5 To stop recording, first press 9, then unplug
the USB device.
In the record-one mode, the playback will
auto go to the stop position after one
track/file comes to an end.
During MP3 and WMA recording, make sure
the playback of the file you want to record is
wholly completed before manually stop
recording. Or any part of the file will not be
recorded.
During recording, if the memory of the USB
device runs out, playback will not continue.
Helpful hints:
– In recording mode (even the USB device is
unplugged from the set), selections of
track/album, play modes (repeat and shuffle
modes) are not available.
All the recorded audio files will be stored in
the folder named _PHILIPS which is
automatically created for recording.
The recorded audio file will be stored in either
.mp3 format (for the disc of audio or MP3), or
.wma format (for WMA disc).
– Copyright-protected CD will not be recorded.
– DRM-protected WMA is not supported.
– Do not directly unplug the USB device to stop
recording for a possible loss of some of the
recorded contents.
– For MP3 and WMA recording, if the name of
a file to be recorded is the same as the one of
a file stored in the USB device, the file will not
be recorded. In this case, AZ3830’s display will
show flashing
Err and duP interchangeably 3
seconds.
– For some USB device of low speed, the play-
back may go with muted sound for some sec-
onds which will depend on the capability of the
low-speed USB device.
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 6
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of
plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a
value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 3 Amp.
Note:The severed plug must be disposed of to avoid a possible shock hazard should it
be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N),
brown = live (L). As these colours may not correspond with the colour markings iden-
tifying the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
Do not connect either wire to the earth terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to 1972.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and elec-
tronic products.
Please act according to your local rules and do not dispose of your old products with
your normal household waste.The correct disposal of your old product will help prevent
potential negative consequences for the environment and human health.
USB Connection
Auxiliary connection
Deleting audio files on a
USB device
1 Press repeatedly SOURCE (or USB on
the remote contorl) to select USB mode.
2 Plug a USB mass storage device.
3 Select the track you want to delete before
or during playback.
In the stop position, you may select an
album to delete.
4 Briefly press DEL on the remote contorl.
“D TRK” is displayed, flashing (see 0).
5 To not to delete, wait until flashing D TRK
disappears after 4 seconds of flashing, or
just press 9.
Helpful hints:
– For some MP3 players, AZ3830 will read it
as only one folder which will wrap up all the
audio files on the player regardless of more
than one folder on that player.
AZ3830 may not be able to delete a file
/albume stored on some MP3 players.
Connecting an external device
You can listen to the sound of the connect-
ed external device through your AZ3830’s
speakers.
1 Press repeatedly SOURCE (or AUX on
the remote contorl) to select AUX mode.
2 Use a line-in cable (not supplied) to connect
AZ3830’s AUX jack (3.5 mm, located on the
top panel) to an AUDIO OUT or
headphone jack on an external equipment
(such as CD player, or VCR).
The making of unauthorized copies of
copy-protected material, including com-
puter programmes, files, broadcasts and
sound recordings, may be an infringe-
ment of copyrights and constitute a
criminal offence.This equipment should
not be used for such purposes.
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 7
Safety information
Place the set on a hard, flat and stable surface
so that the system does not tilt.
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
The apparatus shall not be exposed to
dripping or splashing.
Adequate ventilation with a minimum gap of
15 cm between the ventilation holes and sur-
rounding surfaces is necessary to prevent
heat build-up.
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc..
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
No naked flame sources, such as lighted can-
dles, should be placed on the apparatus.
The mechanical parts of the set contain
self-lubricating bearings and must not be oiled
or lubricated.
•To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
CD player and CD handling
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
The lens of the CD player should never be
touched!
Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
•Always close the CD door to avoid dust on
the lens.
•To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
Never write on a CD or attach any stickers
to it.
Safety & Maintenance (See !)
No sound/ power
Volume not adjusted
Adjust the VOLUME
Power cord not securely connected
Connect the AC power cord properly
Batteries dead/ incorrectly inserted
Insert (fresh) batteries correctly
Disc contains non-audio files
Insert a suitable disc or press
or §
once or
more skip to an audio track, instead of the data
files.
Display does not function properly/No
reaction to operation of any of the
controls
Electrostatic discharge
Switch off and unplug the set. Reconnect after a
few seconds.
no indication
It is set in the USB mode.
Press repeatedly SOURCE (CD on the
remote control) to select CD source.
No disc inserted
Insert a suitable disc
Disc badly scratched or dirty
Replace/clean CD (See Maintenance)
CD-R(W) is blank or the disc is not finalized.
Use a finalized CD-R(W)
Laser lens steam up
•Wait until lens has cleared.
Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact
Disc standard.
The disc skips tracks
Disc damaged or dirty
Replace or clean disc
Shuffle or program is active
Switch off shuffle/program
Sound skips during MP3 playback
MP3 file made at compression level exceeding
320kbps
Use a lower compression level to record CD
tracks into MP3 format
Disc damaged or dirty
Replace or clean disc.
Note:
DRM-protected WMA disc is not supported.
The USB device doesn’t play on my
AZ3830
It is not set in the USB mode.
Press repeatedly SOURCE (or USB on the
remote contorl) to select USB mode.
The device is not securely connected to AZ3830’s
USB port.
Re-connect the device, and make sure that the
device is powered on.
The device is not supported by AZ3830, or the audio
file format stored on the device is not supported by
AZ3830.
Use a compatible device/ playable audio file
format.
The disc file cannot be recorded to the
USB device
You stop recording when the MP3 or WMA file you
want to record is still playing.
Select record-one mode to record, or stop
recording only when the playback of MP3 or
WMA file is wholly completed.
The memory of the USB device runs out.
Delete some unwanted files on the USB device to
free some memory, or use another USB device of
sufficient free memory to record.
The name of a MP3 or WMA file on the disc is
identical to the one of a file on the USB device.
Change to a different name for the file on the
USB device.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no cir-
cumstances should you try to repair the set yourself, as this will inval-
idate the guarantee.
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 8
Pas de tonalité/puissance
VOLUME non réglé
Réglez le VOLUME
Cordon d'alimentation mal branché
•Branchez correctement le cordon d'alimentation
Piles
à
plat/ incorrectment insérées.
Insérez denouvelles piles correctment
Le CD contient des fichiers autres que audio
Introduisez un disque suitable
ou
appuyez une
fois ou répétitivement sur ou § pour pass-
er à une piste CD audio, au lieu d'un fichier
de données.
L’affichage ne fonctionne pas adéquatement/
aucune réaction à l’agissement sur l’une des
commandes
Décharge électrostatique
Mettez
l'appareil
hors service et débranchez la
fiche secteur. Rebranchez au bout de quelques
secondes.
Indication no
–Le mode USB est sélectionné.
Appuyez plusieurs fois sur la touche
SOURCE (ou la touche CD de la télécom-
mande) pour sélectionner la source CD.
Pas de CD dans l’appareil
Insérez un CD
CD griffé/contaminé
Remplacez ou nettoyez le CD, voir Entretien
Lentille laser embuée
Attendez jusqu'à ce que la lentille soit claire
CD-R/CD-RW est vierge ou le CD n'a pas été
reconnu
Utilisez un CD-R/CD-RW reconnu
Remarque:
Assurez-vous que vos CD n'ont pas été codés
à l'aide de telles technologies car certaines
ne sont pas compatibles avec la norme
Compact Disc.
Le CD saute
CD endommagé ou contaminé
Remplacez ou nettoyez le disque
shuffle ou program sont actives
Désactivez shuffle / program
Interruptions sonores en cours de lecture
MP3
Le fichier MP3 a été créé à un niveau de
compression excédant 320kbps.
Utilisez un niveau de compression inférieur
pour enregistrer vos pistes CD sous le
format MP3.
CD endommagé ou contaminé
Remplacez/nettoyez le CD.
Le périphérique USB ne fonctionne pas
sur mon AZ3830.
Le mode USB n'est pas sélectionné.
Appuyez plusieurs fois sur la touche
SOURCE (ou la touche USB de la télé-
commande) pour sélectionner la source USB.
Le périphérique n'est pas connecté correctement au
port USB du AZ
3830
.
Connectez de nouveau le périphérique, et
assurez-vous que le périphérique est alimenté.
Le périphérique n'est pas supporté par l' AZ
3830
,
ou le format du fichier audio stocké sur le
périphérique n'est pas supporté par l' AZ
3830
.
Utilisez un périphérique/format de fichier audio
compatible.
Il est impossible d'enregistrer ce fichier
CD sur le périphérique USB.
Vous avez interrompu l'enregistrement alors que le
fichier MP3 ou WMA que vous souhaitez enregistrer
est en cours de lecture.
Sélectionnez le mode d'enregistrement d'une
seule piste pour effectuer l'enregistrement ou
arrêtez l'enregistrement uniquement lorsque la
lecture du fichier MP3 ou WMA est terminée.
La mémoire du périphérique USB est presque
saturée.
Supprimez certains fichiers superflus du
périphérique USB pour libérer de l'espace
mémoire ou utilisez un autre périphérique USB.
Le nom d'un fichier MP3 ou WMA du CD est
identique à celui situé sur le périphérique USB.
Modifiez le nom du fichier situé sur le
périphérique USB.
Depistage des Anomalies
Si une erreur se produit, contrôlez d'abord les points indiqués dans la liste ci-dessous avant
d'emmener l'appareil chez le réparateur. Si vous ne parvenez pas à remédier aux problèmes à partir
de ces indications, consultez votre concessionnaire ou le centre de service après-vente.
ATTENTION: Ne jamais ouvrir vous-même l'appareil
au risque de recevoir
des chocs électriques. N'essayez en aucun cas de réparer
vous-même
l'appareil, car ceci vous ferait perdre le droit à la
garantie.
ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 9
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Philips AZ3830/12 Manuel utilisateur

Catégorie
Lecteur CD
Taper
Manuel utilisateur

dans d''autres langues