Simplicity 7800953-00 Manuel utilisateur

7106180USCN

Revision D

en

Operator’s Manual

es

Manual del operador

fr

Manuel d’utilisation

Not For

Reproduction

2

Not For

Reproduction

3

en

Thank you for purchasing this quality-built Rear Engine

Rider. We’re pleased that you’ve placed your confidence

in the brand. When operated and maintained according

to the manuals, your product will provide many years of

dependable service.

The manuals contain safety information to make you aware

of the hazards and risks associated with the unit and how

to avoid them. This Rear Engine Rider was designed to be

used as described in operator’s manual and is not intended

for any other purpose. It is important that you read and

understand the instructions thoroughly before attempting

to start or operate this equipment. Save these original

instructions for future reference.

This product requires final assembly before use. Refer

to the setup guide for instructions on final assembly

procedures. Follow the instructions completely.

Manual Contents:

Operator Safety ............................................................... 3

Features and Controls

.................................................... 9

Safety Interlock Systems Checks ................................ 10

Operation ....................................................................... 10

Maintenance .................................................................. 19

Troubleshooting ............................................................ 24

Specifications ................................................................ 25

The images in this document are representative, and are

meant to complement the instructional text they accompany.

Your unit may vary from the images displayed. LEFT and

RIGHT are as seen from the operator’s position.

Operator Safety

Safety Alert Symbol and Signal Words

The safety alert symbol indicates a potential personal

injury hazard. A signal word (DANGER, WARNING, or

CAUTION) is used with the alert symbol to designate a

degree or level of hazard seriousness. A safety symbol may

be used to represent the type of hazard. The signal word

NOTICE is used to address practices not related to

personal injury.

DANGER indicates a hazard which, if not avoided, will

result in death or serious injury.

WARNING indicates a hazard which, if not avoided,

could result in death or serious injury.

CAUTION indicates a hazard which, if not avoided,

could result in minor or moderate injury.

NOTICE indicates an action that could result in damage to

the product.

Hazard Symbols

General Operator Safety Warning

Symbol Meaning Symbol Meaning

Safety

information

about hazards

that can result in

personal injury.

Read and

understand

the operator’s

manual before

operating or ser-

vicing the unit.

Thrown objects

hazard.

Amputation

hazard - rotating

blade. Keep feet

away.

Amputation

hazard - do not

touch moving

parts.

Amputation

hazard - rotat-

ing blade. Keep

hands away.

Keep

bystanders and

children away.

Toxic fume haz-

ard.

Fire hazard. Explosion haz-

ard.

Battery

explosion

hazard.

Shock hazard.

Hot surface

hazard.

Explosion haz-

ard.

Shock hazard. Kickback haz-

ard.

Eye protection

recommended.

Ear protection

recommended

for extended

use.

Remove the

key before

performing

service.

Remove the

spark plug wire

before perform-

ing service.

Not For

Reproduction

4

3. DO NOT allow children or others to ride on machine,

attachments or towed equipment (even with the blades

OFF). They may fall and be seriously injured.

4. DO NOT allow pre-teenage children to operate machine.

5. ALLOW only responsible adults & teenagers with

mature judgment under close adult supervision to

operate machine.

6. DO NOT operate blades in reverse unless absolutely

necessary. STOP BLADES. LOOK and SEE behind and

down for children, pets and hazards before and while

backing.

7. USE EXTRA CARE when approaching blind corners,

shrubs, trees, or other objects that may obscure vision.

Protection Against Tip-Overs/Roll-Overs

Slopes are a major factor related to loss-of-control and

tipover/roll-over accidents, which can result in severe injury

or death. All slopes require extra CAUTION. If you cannot

back up the slope or if you feel uneasy on the slope, DO

NOT mow it. Use extra care with grass catchers or other

attachments; these affect the handling and the stability of

the machine.

1. DO NOT operate machine on slopes exceeding 10

degrees (18% grade).

2. Turn blades OFF when traveling uphill. Use a slow

speed and avoid sudden or sharp turns.

3. DO NOT operate machine back and forth across face of

slopes. Operate up and down. Practice on slopes with

blades off.

4. AVOID starting, stopping or turning on slopes. If

machine stops going uphill or tires lose traction, turn

blades OFF and back slowly straight down the slope.

5. STAY ALERT for holes and other hidden hazards. Tall

grass can hide obstacles. Keep away from ditches,

washouts, culverts, fences and protruding objects.

6. KEEP A SAFE DISTANCE (at least two mower widths)

away from edge of ditches and other drop offs. The

machine could turn over if an edge caves in.

7. Always begin forward motion slowly and with caution.

8. DO NOT begin forward motion while the machine is

rolling backwards. A rearward tip-over may result.

9. Use weights or a weighted load carrier in accordance

with instructions supplied with a grass catcher or other

attachments. DO NOT operate machine on slopes

exceeding 10 degrees (18% grade) when equipped with

grass catcher or other attachments.

10. DO NOT put your foot on the ground to try to stabilize

the machine.

11. DO NOT operate machine on wet grass. Reduced

traction could cause sliding.

WARNING

This powerful cutting machine is capable of amputating

hands and feet and can throw objects that can cause

injury and damage! Failure to comply with the following

SAFETY instructions could result in serious injury or

death to the operator or other persons. The owner of the

machine must understand these instructions and must

allow only persons who understand these instructions to

operate machine. Each person operating the machine

must be of sound mind and body and must not be under

the influence of any substance, which might impair vision,

dexterity or judgment.

Carbon Monoxide Warning

WARNING

POISONOUS GAS HAZARD. Engine exhaust contains

carbon monoxide, a poisonous gas that could kill

you in minutes. You CANNOT see it, smell it, or taste

it. Even if you do not smell exhaust fumes, you could

still be exposed to carbon monoxide gas. If you start

to feel sick, dizzy, or weak while using this product,

shut it off and get to fresh air RIGHT AWAY. See a

doctor. You may have carbon monoxide poisoning.

• Operate this product ONLY outside far away from

windows, doors and vents to reduce the risk of carbon

monoxide gas from accumulating and potentially being

drawn towards occupied spaces.

• Install battery-operated carbon monoxide alarms or

plug-in carbon monoxide alarms with battery back-up

according to the manufacturer’s instructions. Smoke

alarms cannot detect carbon monoxide gas.

• DO NOT run this product inside homes, garages,

basements, crawlspaces, sheds, or other partially-

enclosed spaces even if using fans or opening doors

and windows for ventilation. Carbon monoxide can

quickly build up in these spaces and can linger for

hours, even after this product has shut off.

• ALWAYS place this product downwind and point the

engine exhaust away from occupied spaces.

Protection for Children

Tragic accidents can occur if the operator is not alert to the

presence of children. Children are often attracted to the

machine and the mowing activity. Children who have been

given rides in the past may suddenly appear in the mowing

area for another ride and be run over or backed over by the

machine. Never assume that children will remain where you

last saw them.

1. KEEP children out of the mowing area and under the

watchful care of a responsible adult other than the

operator.

2. DO NOT allow children in yard when machine is

operated (even with the blade OFF).

Not For

Reproduction

5

en

12. Choose a low enough speed setting so that you will not

have to stop or shift on a slope. Tires may lose traction

on slopes even though the brakes are functioning

properly.

13. DO NOT operate machine under any condition where

traction, steering or stability is doubtful.

14. Always keep the machine in gear when going down

slopes. DO NOT shift to neutral (or actuate hydro roll

release) and coast downhill.

15. Machine stability is tested in accordance with the

applicable ANSI B71 standard using an operator weight

of 200 lbs. To minimize the risk of a tip-over or roll-over,

operators weighing more than 200 lbs. should further

limit the ground speed and the degree of slope to be

mowed.

Preparation

1. Read, understand, and follow instructions and warnings

in this manual and on the machine, engine and

attachments. Know the controls and the proper use of

the machine before starting.

2. Only mature, responsible persons shall operate the

machine and only after proper instruction.

3. Data indicates that operators age 60 and above, are

involved in a large percentage of mower-related injuries.

These operators should evaluate their ability to operate

the mower safely enough to protect themselves and

others from serious injury.

4. Handle fuel with extra care. Fuels are flammable

and vapors are explosive. Use only an approved fuel

container. DO NOT remove fuel cap or add fuel with

engine running. Add fuel outdoors only with engine

stopped and cool. Clean spilled fuel from machine. DO

NOT smoke.

5. Practice operation of machine with BLADES OFF to

learn controls and develop skills.

6. Check the area to be mowed and remove all objects

such as toys, wire, rocks, limbs and other objects that

could cause injury if thrown by blade or interfere with

mowing.

7. Keep people and pets out of mowing area. Immediately

STOP blades, STOP engine, and STOP machine if

anyone enters the area.

8. Check shields, deflectors, switches, blade controls and

other safety devices frequently for proper operation and

location.

9. Make sure all safety decals are clearly legible. Replace

if damaged.

10. Protect yourself when mowing and wear safety glasses,

a dust mask, hearing protection, long pants and

substantial footwear.

11. Know how to STOP blades and engine quickly in

preparation for emergencies.

12. Use extra care when loading or unloading the machine

into a trailer or truck.

13. Check grass catcher components frequently for signs of

wear or deterioration and replace as needed to prevent

injury from thrown objects going through weak or worn

spots.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme

care in handling gasoline. Gasoline is extremely flammable

and the vapors are explosive.

1. Extinguish all cigarettes, cigars, pipes and other

sources of ignition.

2. Use only an approved fuel container.

3. DO NOT remove fuel cap or add fuel with the engine

running. Allow the engine to cool before refueling.

4. DO NOT refuel the machine indoors.

5. DO NOT store the machine or fuel container inside

where there is an open flame, spark or pilot light such as

on a water heater or other appliances.

6. DO NOT fill fuel containers inside a vehicle or on a

truck or trailer bed with a plastic liner. Always place the

containers on the ground away from the vehicle before

filling.

7. Remove gas-powered equipment from the vehicle or

trailer and refuel it on the ground. If this is not possible,

then refuel equipment using a portable container, rather

than a gasoline dispenser nozzle.

8. DO NOT start gas powered equipment in enclosed

vehicles or trailers.

9. Keep the nozzle in contact with the rim of the fuel

tank or container opening at all times until fueling is

complete. DO NOT use a nozzle lock-open device.

10. If fuel is spilled on clothing, change clothing

immediately.

11. Never overfill a fuel tank. Replace fuel cap and tighten

securely.

Operation

1. Mount and dismount machine from left side. Keep clear

of discharge opening at all times.

2. Start engine from operator’s seat, if possible. Make sure

blades are OFF and parking brake is set.

3. DO NOT leave machine with engine running. STOP

engine, STOP blades, SET brake, and remove key

before leaving operators position of any reason.

4. DO NOT operate machine unless properly seated with

feet on feet rests or pedal(s).

Not For

Reproduction

6

5. STOP BLADES and ENGINE and make sure blades

have stopped before removing grass catcher or

unclogging mower to prevent loss of fingers or hand.

6. Blades must be OFF except when cutting grass. Set

blades in highest position when mowing over rough

ground.

7. Keep hands and feet away from rotating blades

underneath deck. DO NOT place foot on ground while

BLADES are ON or machine is in motion.

8. DO NOT operate machine without entire grass

catcher or guards in place and working. DO NOT point

discharge at people, passing cars, windows or doors.

9. Slow down before turning.

10. Watch out for traffic when near or crossing roadways.

11. STOP engine immediately after striking an obstruction.

Inspect machine and repair damage before resuming

operation.

12. Operate machine only in daylight or with good artificial

light.

13. Exercise CAUTION when pulling loads. Limit loads to

those you can safely control and attach loads to hitch

plate as specified with attachment instructions.

14. On slopes, the weight of the towed equipment may

cause loss of traction and loss of control. When towing,

travel slowly and allow extra distance to stop.

15. DO NOT operate engine in enclosed areas. Engine

exhaust gases contain carbon monoxide, a deadly

poison.

16. DO NOT discharge material against a wall or

obstruction. Material may ricochet back towards the

operator.

17. Only use accessories approved by the manufacturer.

See manufacturer’s instructions for proper operation

and installation of accessories.

18. Duration of machine operation may need to be limited

due to exposure to noise and vibration.

19. DO NOT operate machine when the risk of lightning is

present.

Towing

1. Tow only with a machine that has a hitch designed for

towing. DO NOT attach towed equipment except at the

hitch point.

2. Refer to “Towing Implements” in the Operation section

regarding weight limits for towed equipment and towing

on slopes.

3. DO NOT allow children or others on towed equipment.

4. On slopes, the weight of the towed equipment may

cause loss of traction and loss of control. Use caution

while operating on slopes.

5. Travel slowly and allow extra distance to stop.

Maintenance

1. DO NOT store machine or fuel container inside where

fumes may reach an open flame, spark or pilot light

such as in a water heater, furnace, clothes dryer or

other gas appliance. Allow engine to cool before storing

machine in an enclosure. Store fuel container out of

the reach of children in a well ventilated, unoccupied

building.

2. Keep engine and machine free of grass, leaves or

excess grease to reduce fire hazard and engine

overheating.

3. When draining fuel tank, drain fuel into an approved

container outdoors and away from open flame.

4. Check brakes frequently; adjust, repair or replace as

needed.

5. Keep all bolts, nuts and screws properly tight. Check

that all cotter pins are in proper position.

6. Always provide adequate ventilation when running

engine. Exhaust gases contain carbon monoxide, an

odorless and deadly poison.

7. Disconnect negative (black) cable from battery before

performing maintenance or service. Cranking engine

could cause injury.

8. DO NOT work under machine without safety blocks.

9. DO NOT stand unit on end.

10. Service engine and make adjustments only when

engine is stopped. Remove spark plug wire(s) from

spark plug(s) and secure wire(s) away from spark

plug(s).

11. DO NOT change engine governor speed settings or

overspeed engine.

12. Lubricate machine at intervals specified in manual to

prevent controls from binding.

13. Mower blades are sharp and can cut. Wrap the blades

or wear heavy leather gloves and use CAUTION when

handling them.

14. DO NOT test for spark by grounding spark plug next

to spark plug hole; spark plug could ignite gas exiting

engine.

15. Have machine serviced by an authorized dealer at least

once a year and have the dealer install any new safety

devices.

16. Maintain or replace safety and instruction labels as

necessary.

17. Use only factory authorized replacement parts or

equivalent when making repairs.

Not For

Reproduction

7

en

Safety and Instructional Decals - Domestic

Before operating your unit, read and understand the safety

and instructional decals (compare Figure 1 with the table).

The cautions, warnings, and instructions are for your safety.

To avoid personal injury or damage to the unit, understand

and follow all the decals.

WARNING

If any safety or instructional decals become worn or

damaged, and cannot be read, order replacement decals

from your dealer.

F

I

H

G

A

J

C

H

B

D

E

Figure 1

A

Clutch/Brake Operation

Blade Engage

Operation

General Warnings

B

Forward Speed

(Manual Drive Models)

C

Reverse Speed

(Manual Drive Models)

D

Use Caution When

Refueling

E

Transmission Release

(Hydro Drive Models)

F

Weight Limitation

I

Cutting Height

G

Engine Speed

Control

Choke Control

(Select Models)

H

Discharge Safety (2 - 1

on each side of deck)

Not For

Reproduction

8

Safety and Instructional Decals - ANSI Export

Before operating your unit, read and understand the safety

and instructional decals (compare Figure 2 with the table)

A

C

B

Figure 2

A

1

2

3

4

5

6

7

8

B

9

C

10

1. WARNING: Read and understand the Operator’s

Manual before using this machine. Know the location

and function of all controls. Do not operate this machine

unless you are trained.

2. DANGER - LOSS OF TRACTION, SLIDING,

STEERING AND CONTROL ON SLOPES HARZARD:

If machine stops forward motion or starts sliding on a

slope, stop the blades and drive slowly off the slope.

3. DANGER: FIRE HAZARD: Keep unit free of grass,

leaves and excess oil. Do not add fuel while engine is

hot or running. Stop engine, remove key and allow to

cool for at least 3 minutes prior to adding fuel. Do not

add fuel indoors, in an enclosed trailer, garage or other

enclosed areas. Clean up spilled fuel. Do not smoke

while operating this machine.

4. DANGER - TIPPING AND SLIPPING HAZARD: Mow

up and down slopes not across. Do not operate on

slopes over 10 degrees. Avoid sudden and sharp (fast)

turns while on slopes.

5. DANGER - AMPUTATION AND DISMEMBERMENT

HAZARD: To avoid injury from rotating blades and

moving parts, keep safety devices (guards, shields and

switches) in place and working.

6. Do not mow when children or others are around. Never

carry riders especially children even with the blades off.

Do not mow in reverse unless absolutely necessary.

Look down and behind – before and while backing.

7. Consult technical literature before performing technical

repairs or maintenance. When leaving the machine,

shutoff engine, set the parking brake to the lock position

and remove the ignition key.

8. Keep by-standers and children a safe distance away.

Remove objects that can be thrown by the blade. Do not

mow without discharge chute in place.

9. Do not mow without discharge chute or entire grass

catcher in place.

10. To avoid injury from rotating blades, stay clear of deck

edge and keep others away.

Not For

Reproduction

9

en

Features and Controls

Compare the features and controls in Figure 3 with the table

below.

B

Q

C

H

P

D

F

E

G

J I

O

AN

L

M

K

Figure 3

Ref.

Description Icon(s) Icon Definition

A Operator Seat

-- --

B Steering Wheel -

controls direction of

unit

-- --

C

Engine Speed

Control (hidden

from view) - controls

engine speed

Choke on (closed) -

if equipped

Engine speed fast

Engine speed low

D

Cutting Height Adjust

Lever - adjusts

cutting height

Cutting height low

Cutting height high

E Parking Brake Latch

(hidden from view) -

locks brake

Parking brake on

(engaged)

F Blade Control -

engages mower

blade

Blade on (engaged)

Blade off

(disengaged

Ref.

Description Icon(s) Icon Definition

G

Clutch/Brake Pedal

- engages clutch

(manual drive

models) and brake

Clutch engaged

(manual drive

models)

Brake on (engaged)

H

Headlight (not shown;

select models)

-- --

I

Mulching Cover

-- --

J

Ignition Switch -

starts engine

Engine off

Engine on (run)

Engine start

K

Transmission

Release Lever

(hidden from view;

hydro drive models) -

releases transmission

so unit can roll freely

Transmission

engaged (locked)

Transmission

released (unlocked)

L

Reverse Mowing

Switch - temporarily

allows mower blade

to operate with

transmission in

reverse

-- --

M

Recoil Start Handle

(hidden from view)

-- --

N

Transmission Shift

Lever (manual drive

models) - selects

transmission speed

and direction

Forward ground

speed

Neutral (no ground

speed)

Reverse ground

speed

O

Fuel Tank

-- --

P

Forward Ground

Speed Pedal (hydro

drive models) -

controls forward

ground speed

Forward ground

speed

Q

Reverse Ground

Speed Pedal (hydro

drive models) -

controls reverse

ground speed

Reverse ground

speed

Not For

Reproduction

10

Safety Interlock Systems Checks

WARNING

DO NOT operate machine if any safety interlock or safety

device is not in place and functioning properly. Contact

your dealer immediately for assistance. DO NOT attempt

to defeat, modify or remove any safety device.

Engine must not start if:

1. The Clutch/Brake Pedal is not fully depressed OR,

2. The Blade Control is in the ON (engaged) position.

Engine should start if:

1. The Blade Control is in the OFF (disengaged) position

AND,

2. The Clutch/Brake Pedal is fully depressed.

Engine and blade must stop if:

1. The operator rises off of the operator seat while the

Blade Control is in the ON (engaged) position OR,

2. The operator rises off of the operator seat while the

Clutch/Brake Pedal is not fully depressed OR,

3. The operator attempts to drive the unit in reverse with

the mower blade engaged and the reverse mowing

option function (RMO) not activated.

WARNING

Once mower blade is disengaged, it should come

to a complete stop in 5 seconds or less. If the blade

continues to rotate after 5 seconds, DO NOT operate the

machine. Return the machine to an authorized dealer for

adjustment.

Operation

Before Starting

Make the following checks and perform the service required

before each start-up:

1. Check the tire pressure; add or release air as

needed. Refer to “How To Check Tire Pressure” in the

Maintenance section.

2. Check guards, deflectors and covers to make sure all

are in place and securely tightened.

3. Check engine oil and add oil as needed. Refer to “How

To Check/Add Oil”.

4. Add fuel to the fuel tank as needed. Refer to “How to

Add Fuel”.

5. Adjust the operator seat as needed to the most

comfortable position. Refer to “How To Adjust The

Operator Seat”.

6. Check all operator controls to ensure they operate freely

without binding.

7. Perform the Safety Interlock System Checks. Refer to

“Safety Interlock System Checks”.

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty

Certified oils for best performance. Other high-quality

detergent oils are acceptable if classified for service SF,

SG, SH, SJ or higher. Do not use special additives.

Outdoor temperatures determine the proper oil viscosity for

the engine. Use the chart to select the best viscosity for the

outdoor temperature range expected.

SAE 30 *

10W-30

†

Synthetic 5W-30

5W-30

A

B

C

D

A SAE 30 - Below 40°F (4°C) the use of SAE 30 will

result in hard starting.

B 10W-30 - Above 80°F (27°C) the use of 10W-30 may

cause increased oil consumption. Check oil level

more frequently.

C Synthetic 5W-30

D 5W-30

Not For

Reproduction

11

en

How To Check/Add Oil

Before adding or checking the oil

• Place engine level.

• Clean the oil fill area of any debris.

1. Remove the dipstick (A, Figure 4) and wipe with a clean

cloth.

NOTE:

On some models, the dipstick is accessible through an

opening behind the operator seat.

2. Insert and tighten the dipstick.

3. Remove the dipstick and check the oil level. It should be

at the top of the full indicator (B) on the dipstick.

4. If low, add oil slowly into the engine oil fill (C). Do not

overfill. After adding oil, wait one minute and then

recheck the oil level.

5. Replace and tighten the dipstick.

B

A

C

Figure 4

Fuel Recommendations

Fuel must meet these requirements:

• Clean, fresh, unleaded gasoline.

• A minimum of 87 octane/87 AKI (91 RON). High altitude

use, see below.

• Gasoline with up to 10% ethanol (gasohol) is

acceptable.

NOTICE: Do not use unapproved gasolines, such as E15

and E85. Do not mix oil in gasoline or modify the engine to

run on alternate fuels. Use of unapproved fuels will damage

the engine components, which will not be covered under

warranty.

To protect the fuel system from gum formation, mix a fuel

stabilizer into the fuel. See Storage. All fuel is not the

same. If starting or performance problems occur, change

fuel providers or change brands. This engine is certified to

operate on gasoline.

The emissions control system for this engine is EM (Engine

Modifications).

High Altitude

At altitudes over 5,000 feet (1524 meters), a minimum 85

octane/85 AKI (89 RON) gasoline is acceptable.

For carbureted engines, high altitude adjustment is

required to maintain performance. Operation without this

adjustment will cause decreased performance, increased

fuel consumption, and increased emissions. Contact a

Briggs & Stratton Authorized Service Dealer for high altitude

adjustment information. Operation of the engine at altitudes

below 2,500 feet (762 meters) with the high altitude

adjustment is not recommended.

For Electronic Fuel Injection (EFI) engines, no high altitude

adjustment is necessary.

Not For

Reproduction

12

How To Adjust The Operator Seat

With the engine stopped:

1. Raise the operator seat.

2. Loosen the two adjusting knobs (A, Figure 6) and

move the seat to the desired position. After adjustment,

tighten the knobs securely.

3. Lower the operator seat.

A

Figure 6

How To Add Fuel

WARNING

Fuel and its vapors are extremely flammable and

explosive. Fire or explosion can cause severe burns or

death.

When Adding Fuel

• Turn engine off and let engine cool at least 5 minutes

before removing the fuel cap.

• Fill fuel tank outdoors or in well-ventilated area.

• Do not overfill fuel tank. To allow for expansion of the

fuel, do not fill above the bottom of the fuel tank neck.

• Keep fuel away from sparks, open flames, pilot lights,

heat, and other ignition sources.

• Check fuel lines, tank, cap, and fittings frequently for

cracks or leaks. Replace if necessary.

• If fuel spills, wait until it evaporates before starting

engine.

1. Clean the fuel cap area of dirt and debris. Remove the

fuel cap (A, Figure 5).

2. Fill the fuel tank with fuel. To allow for expansion of the

fuel, do not fill above the bottom of the fuel tank neck

(B).

3. Reinstall the fuel cap.

B

A

Figure 5

Not For

Reproduction

13

en

How To Start The Engine

WARNING

POISONOUS GAS HAZARD. Engine exhaust contains

carbon monoxide, a poisonous gas that could kill

you in minutes. You CANNOT see it, smell it, or taste

it. Even if you do not smell exhaust fumes, you could

still be exposed to carbon monoxide gas. If you start

to feel sick, dizzy, or weak while using this product,

shut it off and get to fresh air RIGHT AWAY. See a

doctor. You may have carbon monoxide poisoning.

• Operate this product ONLY outside far away from

windows, doors and vents to reduce the risk of carbon

monoxide gas from accumulating and potentially

being drawn towards occupied spaces.

• Install battery-operated carbon monoxide alarms or

plug-in carbon monoxide alarms with battery back-up

according to the manufacturer’s instructions. Smoke

alarms cannot detect carbon monoxide gas.

• DO NOT run this product inside homes, garages,

basements, crawlspaces, sheds, or other partially-

enclosed spaces even if using fans or opening doors

and windows for ventilation. Carbon monoxide can

quickly build up in these spaces and can linger for

hours, even after this product has shut off.

• ALWAYS place this product downwind and point the

engine exhaust away from occupied spaces.

Electric Start:

1. Sit squarely in the operator seat.

2. Manual Drive Models - Move the transmission shift lever

to the Neutral (‘N’) position. Refer to “How To Engage

The Transmission”.

WARNING

DO NOT start the engine with the transmission shift lever

in a drive position. Follow starting instructions carefully.

3. Make sure the Blade Control (A, Figure 7) is in the OFF

position.

A

Figure 7

4. Fully depress the Clutch/Brake Pedal (A, Figure 8).

A

Figure 8

5. Move the engine speed control (A, Figure 9) to the

FAST position (or CHOKE position, if equipped).

NOTE: The CHOKE position is not required when starting

a warm engine.

A

Figure 9

Not For

Reproduction

14

6. Insert the ignition key (A, Figure 10) into the ignition

switch. Turn the key to the START position until the

engine starts.

NOTE: When the ignition key is turned to START, the

engine will turn over, but will not start unless the Clutch/

Brake pedal is fully depressed and the Blade Control is in

the OFF position.

A

Figure 10

NOTE: If after 5 seconds of cranking the engine does not

start, release the key, make sure the Clutch/Brake Pedal is

fully depressed, and attempt starting again after waiting for

approximately 20 seconds.

7. After the engine starts, move the engine speed control to

the FAST position (if equipped with choke) and allow a

brief warm-up until engine runs smooth.

NOTE: Always operate with the engine speed control in the

FAST position.

NOTE: The headlight (featured on select models) is opera-

tional any time the ignition switch is in the RUN or START

position.

Recoil Start:

1. Manual Drive Models - Move the transmission shift lever

to the Neutral (‘N’) position. Refer to “How To Engage

The Transmission”.

WARNING

DO NOT start the engine with the transmission shift lever

in a drive position. Follow starting instructions carefully.

2. Make sure the Blade Control (A, Figure 7) is in the OFF

position.

3. Set the parking brake. Refer to “How To Set The Parking

Brake”.

4. Move the engine speed control (A, Figure 9) to the

FAST position (or CHOKE position, if equipped).

NOTE: The CHOKE position is not required when starting

a warm engine.

5. Insert the ignition key (A, Figure 11) into the ignition

switch. Turn the key to the RUN position (B).

A

B

Figure 11

6. Grasp the recoil start handle on the engine (A, Figure

12) and pull briskly until the engine starts.

7. After the engine starts, move the engine speed control

to the FAST position (if equipped with choke) and allow

a brief warm-up period until engine runs smooth.

NOTE: Always operate with the engine speed control in the

FAST position.

NOTE: The headlight (featured on select models) is opera-

tional any time the ignition switch is in the RUN position.

A

Figure 12

Not For

Reproduction

15

en

How To Engage The Mower Blade

1. Start the engine.

2. Move the blade control (A, Figure 13) to the ON position.

A

Figure 13

How To Engage The Transmission

Manual Drive Models:

1. Start the engine.

2. To move forward:

• Depress the clutch/brake pedal (A, Figure 8).

• Move the transmission shift lever (A, Figure 14) from

the Neutral (‘N’) position (B) into the first forward speed

notch (C).

• Release the clutch/brake pedal to begin forward motion.

• During forward motion, the transmission shift lever may

be placed in any desired forward speed (D) without

depressing the clutch/brake pedal.

A

B C

D

E

Figure 14

3. To move backward:

• Depress the clutch/brake pedal (A, Figure 8).

• Move the transmission shift lever (A, Figure 14) from the

Neutral (‘N’) position (B) into the reverse speed slot (E).

• During reverse motion, the transmission shift lever

may be placed in any desired reverse speed without

depressing the clutch/brake pedal.

Hydro Drive Models:

1. Start the engine.

2. Make sure the parking brake is released. Refer to “How

To Set The Parking Brake”.

3. To move forward:

• Slowly depress the forward ground speed pedal (A,

Figure 15) to begin forward motion. Increase ground

speed by further depressing the pedal.

4. To move backward:

• Slowly depress the reverse ground speed pedal (B) to

begin reverse motion. Increase ground speed by further

depressing the pedal.

NOTE: For best cutting results, choose a slow forward

speed with the engine speed control in the FAST position.

This combination will allow the mower blade to lift the grass

while cutting smoothly and evenly.

NOTICE: If the transmission is moved into reverse while the

mower blade is engaged, the engine will shut off. If mowing

in reverse is necessary, refer to “Reverse Mowing Option

(RMO)”.

WARNING

LOOK and SEE behind and down for children, pets and

hazards before and while backing.

B A

Figure 15

Not For

Reproduction

16

WARNING

DO NOT leave the machine with the engine running.

STOP Blade. STOP engine. Shift to neutral and engage

parking brake. Remove key.

How To Stop The Engine, Transmission And

Mower Blade

Engine

1. Stop the engine by turning the ignition key (A, Figure 16)

to the OFF position.

2. Remove the key.

A

Figure 16

Transmission

• Manual Drive Models:

1. Stop motion of the unit by fully depressing the clutch/

brake pedal (A, Figure 8) to disengage the clutch and

apply the brake.

2. Return the transmission shift lever to the Neutral (‘N’)

position. Refer to “How To Engage The Transmission”.

• Hydro Drive Models:

1. Stop motion of the unit by fully releasing the ground

speed pedals (A, Figure 17). Additional braking can be

achieved by depressing the brake pedal (A, Figure 8).

A

Figure 17

Mower Blade

1. Stop the mower blade by moving the blade control (A,

Figure 7) to the OFF position.

WARNING

Once blade is disengaged, it should come to a complete

stop in 5 seconds or less. If the blade continues to rotate

after 5 seconds, the blade brake must be adjusted.

Return machine to an authorized dealer for adjustment.

DO NOT CONTINUE to operate machine until blade

brake is adjusted and functioning properly.

How To Set The Parking Brake

1. Fully depress the clutch/brake pedal (A, Figure 18).

2. Slide the parking brake latch (B) up and hold while

releasing the clutch/brake pedal. The parking brake is now

set.

B

A

Figure 18

3. To release the parking brake, fully depress the clutch/

brake pedal. The parking brake will release automatically.

WARNING

DO NOT park the machine on slopes.

Not For

Reproduction

17

en

How To Adjust The Cutting Height

1. Raise or lower the cutting height adjust lever (A, Figure

19) into the desired height of cut notch.

A

Figure 19

Reverse Mowing Option (RMO)

WARNING

Mowing in reverse can be hazardous to bystanders.

Tragic accidents can occur if the operator is not alert to

the presence of children. Never activate RMO if children

are present. Children are often attracted to the unit and

the mowing activity.

1. Engage the mower blade. Refer to “How To Engage The

Mower Blade”.

2. Insert the supplied key (A, Figure 20) into the RMO

switch (B), and turn the key to activate the RMO

function. The LED light (C) indicates that the RMO

function is now activated.

3. Engage the transmission in reverse. Refer to “How To

Engage The Transmission”.

4. The RMO function is deactivated when the mower blade

is disengaged.

C

A

B

Figure 20

How To Install The Discharge Deflector

WARNING

DO NOT attempt any adjustments, maintenance, service

or repairs with the engine running.

• STOP engine.

• STOP blade.

• Engage parking brake.

• Remove key.

• Remove spark plug wire from spark plug and secure

away from plug.

• Engine and components are HOT. Avoid serious

burns, allow all parts to cool before working on

machine.

1. Remove the nut and washer (A, Figure 21) securing the

bottom edge of the mulching cover (B) to the mower

deck.

A

B

Figure 21

Not For

Reproduction

18

Hydro Drive Models:

1. Make sure the unit is parked on a flat, even surface.

2. Release the parking brake, if set. Refer to “How To Set

The Parking Brake”.

3. Move the transmission release lever (located behind

the right rear tire) out and down into the locking slot (A,

Figure 23) to disengage the transmission.

4. The unit can now be pushed by hand.

5. After moving the unit to the desired location, move the

transmission release lever up and in (B) to engage the

transmission.

A

B

Figure 23

Towing A Trailer

The maximum horizontal drawbar force allowed is 34 lbs

(150N) *.

The maximum vertical drawbar force is 20 lbs (90 N) *.

* Approximate

2. Raise the mulching cover. Replace the washer and nut

onto the retaining bolt in the deck, tightening securely.

3. Install the discharge deflector (A, Figure 22) to the

mower deck, making sure that the slots (B) in the

deflector fit over the locking tabs (C) on the mulching

cover hinge bracket.

4. Lower the mulching cover.

5. To remove the discharge deflector:

• Raise the mulching cover.

• Lift and remove the discharge deflector from the mower

deck.

• Remove the nut and washer from the retaining bolt in

the deck.

• Lower the mulching cover, securing with the washer and

nut. Tighten securely.

B

C

A

Figure 22

How To Push The Unit By Hand

Manual Drive Models:

1. Make sure the unit is parked on a flat, even surface.

2. Make sure the transmission shift lever is in the

Neutral (N) position. Refer to “How To Engage the

Transmission”.

3. Release the parking brake, if set. Refer to “How To Set

The Parking Brake”.

4. The unit can now be pushed by hand. Be sure to set

the parking brake after the unit is moved to the desired

location.

Not For

Reproduction

19

en

Maintenance

WARNING

DO NOT attempt any adjustments, maintenance, service

or repairs with the engine running.

• STOP engine.

• STOP blade.

• Engage parking brake.

• Remove key.

• Remove spark plug wire from spark plug and secure

away from plug.

• Engine and components are HOT. Avoid serious burns,

allow all parts to cool before working on machine.

Maintenance Schedule

RIDER

Every 8 Hours or Daily

• Check safety interlock system

• Clean debris off rider

• Clean debris from engine area

Every 25 Hours or Annually *

• Check tire pressure

• Check mower blade stopping time

• Check rider for loose hardware

Every 50 Hours or Annually *

• Clean battery and cables

• Check brakes

See Dealer Annually to

• Lubricate rider

• Check mower drive belts

• Check mower blades **

* Whichever comes first

** Check blades more often in regions with sandy soils or

high dust conditions.

Rider Maintenance (Basic)

How To Check The Safety Interlock System

Refer to “Safety Interlock System Checks” in the Operation

section.

How To Clean The Rider And Mower Deck

WARNING

Wear heavy leather gloves when handling or working

around cutting blades. Blades are extremely sharp and

can cause severe injury.

1. Raise the mower deck to the highest cutting position.

Refer to “How To Adjust The Cutting Height”.

2. Clean the underside of the mower deck, removing all

accumulation of grass clippings and debris.

3. Clean the top of the deck, removing all grass clippings

and debris.

4. Use a brush or compressed air to remove loose debris

from the rider.

How To Clean The Engine

Use a brush or compressed air to remove loose debris on

or around the engine.

How To Check Tire Pressure

Use a tire gauge to check the tire pressure; add or release

air as needed. Refer to “Product Specifications” for correct

pressure.

Not For

Reproduction

20

How To Check Mower Blade Stopping Time

WARNING

The following procedure requires the engine and blades

to be operated. Exercise extreme caution. Clear area of

loose parts & tools first. Only operate blades when seat-

ed in the operator’s seat.

1. Start the engine.

2. Engage the mower blade.

3. Disengage the mower blade. The blade should stop

rotating in 5 seconds or less after moving the blade

control to the OFF position.

WARNING

Blade must stop rotating in 5 seconds or less after the

blade has been turned off. DO NOT operate machine.

Contact an authorized dealer for adjustment.

4. If the blade continues to rotate longer than 5 seconds,

do not operate the machine. Contact an authorized

dealer for assistance.

NOTE: Any adjustments and service regarding mower

blade stopping time should be performed by an authorized

dealer.

How To Perform Battery Service

Refer to “Battery Service”.

How To Check The Brake / Parking Brake

1. Check the machine brake for proper function:

• Engage the parking brake, and push the machine. The

rear tires should skid.

• Drive the machine forward and apply the brake. The

machine should come to a complete stop in less than 5

feet (1,5 meters).

2. If the brakes are not functioning properly, do not oper-

ate the machine. Contact an authorized dealer for ser-

vice.

Rider Maintenance (Advanced)

WARNING

DO NOT stand the unit on end. Attempting to do so may

cause an unstable condition, resulting in serious injury or

equipment damage.

• Shift Lever (Manual Drive Models)

Lubricate the shift lever grease fitting (A, Figure 24) with

two shots of general purpose grease from a grease gun.

A

Figure 24

• Rear Axle Bearing (Manual Drive Models)

1. The grease fitting (A, Figure 25) on the left rear axle

bearing requires three shots of general purpose grease

from grease gun.

2. The right rear axle bearing is lubricated by the

differential lubricant and requires no grease.

A

Figure 25

Differential / Chain Case (Manual Drive Units)

Lubrication of the differential and chain case should be

performed by an authorized dealer.

Mower Blade Spindle

The mower blade spindles used on these units are

equipped with sealed spindle bearings, which do not

require lubrication.

Mower Deck Linkage

See your authorized dealer for lubrication of mower deck

linkage pivot points.

Not For

Reproduction

La page est en cours de chargement...

Simplicity 7800953-00 Manuel utilisateur

Simplicity 7800953-00 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents