EN
1
CH-03 QRG Rev. 1
QUICK REFERENCE GUIDE
About This Guide
The CH-03 Quick Reference Guide (QRG) has basic product information on how to use your new stand.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support
or return a product. Visit www.chauvetdj.com
for contact information.
What is Included
• CH-03 (w/ T-Bar)
• Warranty Card
• Quick Reference Guide
• ONLY connect this product to a grounded and protected circuit.
• This product is not intended for permanent installation.
• This product should be assembled only by trained professionals.
• Be sure to assemble this product using all the parts included.
• Do not use this stand for a load that exceeds the maximum weight capacity in this
document, or on the label on the product.
• Do not use the product if any of the following conditions exist:
welded joints are cracked or compromised
horizontal rungs, T-bar, or diagonals are dented or damaged
tripod, junctions, connectors, or quick release pins are bent
the product has been dropped
• Do not drag the product over the floor or other objects.
• Place sand bags over the lower cross bars for increased stability of the product.
The maximum, evenly distributed, load capacity for the CH-03 is 110 lb (50 kg).
Be sure to follow all instructions and cautionary statements that may accompany any
additional items you obtain.
00