Whirlpool WFW88HEAW0 Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire

Ce manuel convient également à

Whi ®
Use & Care Guide
Guide d'utilisation et d_entretien
FRONT-LOADINGAUTOMATICWASHER
LAVEUSEAUTOIVlATIQUEA CHARGEMENT
FRONTAL
®
®
Para obtener acceso al
Manual de uso y
cuidado en espa_ol, o para
obtener informaci6n adicional
acerca de su producto, visite:
www.whirlpool.com
If you have any problems or questions, visit us at www.whirlpool.com
W10441071C
W10441072C =SP
Designed to use only HE
High Efficiency detergents.
Con£ue pour I'utilisation
d'un d6tergent haute
efficacit_ seulement.
Certified to Sanitize and to Reduce Allergens
Homologu& pour assainir et pour r6duire la
pr6sence d'allerg_nes
TABLE OF CONTENTS
WASHER SAFETY...................................................................2
ACCESSORIES........................................................................3
CONTROL PANELAND FEATURES......................................4
USING THE DISPENSER DRAWER.......................................7
CYCLE GUIDE.........................................................................8
USING YOUR WASHER........................................................10
WASHER MAINTENANCE ....................................................13
TROUBLESHOOTING...........................................................16
WARRANTY...........................................................................23
ASSISTANCE OR SERVICE..................................Back Cover
TABLE DE MATIERES
Sg:CURITE DE LA LAVEUSE ................................................ 24
ACCESSOIRES......................................................................25
TABLEAUDE COMMANDE ETCARACTg:RISTIQUES.......26
UTILISATION DU TIROIR DU DISTRIBUTEUR ...................29
GUIDE DE PROGRAMMES ..................................................30
UTILISATION DE LA LAVEUSE............................................32
ENTRETIEN DE LA LAVEUSE..............................................36
Dg:PANNAGE.........................................................................39
GARANTIE .............................................................................47
ASSISTANCE OU SERVICE...................... Couverture artiste
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
2
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry=cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach intothe washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructionsfor grounding instructions.
this time.
SAVE THESE iNSTRUCTiONS
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
ACCESSORIES
Customize your new washer and dryer with the following
genuine Whirlpool accessories. For more information on
options and ordering, call 1-800-442-9991, or visit us at:
www.whirlpool.com/accessories. In Canada, call
1-800-807-6777 or visit us at www.whirlpool.ca.
15" Pedestal
Color-matched pedestals raise the
washer and dryer to a more comfortable
working height. The large drawer
provides convenient storage.
Work Surface
The work surface bridges the
washer and dryer, and provides
a convenient working and
storage area.
Stack Kit
If space is at a premium, the stack kit
allows the dryer to be installed on top
of the washer.
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
NOTE: The control panel features a sensitive surface that
responds to a light touch of your finger. To ensure your selections
are registered, touch the control panel with your finger tip, not
your fingernail. When selecting a setting or option, simply touch
its name.
Model WFW94HE
e I-,
I
I
DRAIN & SPIN
CLEAN WASHER wth _$_
;Steam C_ean _EcoRoost Fan Dry Extra Rnse Cycle Sgnal Control Lock
od 3 seond HO[_3*,ecOrldS H_d 3so ots,'J
far Durn ig,t ForButlor_Sou,ds
N N@N N @
Model WFW88HE
COLD WASH
DELICATES
QUICK
WASH
DRAIN
& SP_N
---_- WHITES
HEAVY
DUTY
rOWELS
ALLERGEN
SANmZE
CLEAN WASHER wth a_r_
Model WFW87HE
QUICK __
WASH
DRAIN
HE,M/Y
DUTY
CLEAN WASHER with aft_sh
E!Ste0mC,o0_I_Eco_oostIExt_0R,nsoITum_,eE_oshICyc,eS,_o_,ICont_o,Lock
I ..............................i
@ Q Q@Q Q @
@
.... I .... I _ I .... I .... I _"
:Steam Clean _EcoBoost Extra Rinse TLmb_eFtesh Cycle SgnaB Control Lock
Ho_d seconds Ho_d seco,_d
I = = = _ = ................= = 1
4
O
O
O
O
O
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer
has run 30 wash cycles as a reminder to run the Clean
Washer cycle.
See "Cycle Guide" for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle,
use for loads weighing 2.5 pounds and less, such as a
soccer uniform or a running tank and shorts.
START
Touch and hold until the light above START comes on to
start a cycle, or touch once while a cycle is in process to
pause it. If you want to add a garment, you can touch START
when the "Add Garment" LED is on.
DELAY WASH
Use + and - to delay the start of the wash cycle by up to
12 hours. To turn off Delay Wash, use + and - to set the
delay time to "0," or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors such
as load size, wash temperature, and water pressure may affect
the time shown in the display during the cycle. Tightly packing
garments, unbalanced loads, or excessive suds may cause the
washer to adjust the cycle time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See "Cycle Guide" for available settings on
each cycle. Not all settings are available with all cycles.
Cycle Status Lights
For details, see "Cycle Status Lights".
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based on
the type of fabric and soils being washed. For best results,
follow the garment label instructions. All wash temperatures
feature a cold rinse.
Spin
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Soil
The Soil setting (wash time) is preset for each wash cycle.
For most loads, use this preset soil level. When you change
the soil setting, the cycle time will increase or decrease in the
Estimated Time Remaining display.
For heavily soiled and sturdy fabrics, use the Soil setting to
select more wash time. For lightly soiled and delicate fabrics,
use the Soil setting to select less wash time. Lower soil level
settings will help reduce tangling and wrinkling.
Presoak
Touch to add a Presoak time of your choice to a wash
cycle. Items will gently tumble through the detergent and
water for the selected time to help loosen tough stains.
O
OPTIONS
Touch to activate additional wash options or additional features
on the washer. Not all options are available on all models.
_ Steam Clean
The Steam Clean option adds additional soak and wash
time to many cycles to help remove tough stains, as well
as a steam boost for added cleaning power. An integrated
heater helps to maintain optimal wash temperatures. See
the "Cycle Guide" for cycles that allow the Steam Clean
option.
_ EcoBoost TM option
Touch to activate the EcoBoost TM option. The EcoBoost TM
option provides additional energy savings through reduced
hot water usage and maintains cleaning performance by
lengthening the wash time on some cycles.
Fan Dry Option (on some models}
The Fan Dry option will periodically tumble the load after the
end of the cycle for up to 12 hours while the integrated fan
circulates air through the washer to reduce humidity.
Toturn on the Fan Dry option, touch Fan Dry. If, however,
the Fan Dry option isturned on, it will stay on for all future
cycles until turned back off- the washer remembers the
last on/off status set. To turn off the Fan Dry option, touch
Fan Dry.
You may also activate the Fan Dry option without running
a cycle by touching and holding POWER for one second,
then touching and holding Fan Dryfor 3 seconds, then
touching and holding START for 3 seconds.
Toturn off the Fan Dry option when it is running, touch
POWER.
Q
NOTE: The door will lock while the Fan Dry option is
active. To cancel the option and unlock the door, touch
POWER.
TumbleFresh TM Option (on some models)
The TumbleFresh TMoption will periodically tumble the
load after the end of the cycle for up to 6 hours to reduce
humidity. To turn on the TumbleFresh _"option, touch
TumbleFresh TM. If, however, the TumbleFresh TM option is
turned on, it will stay on for all future cycles until turned
back off - the washer remembers the last on/off status set.
Toturn off the TumbleFresh TM option, touch TumbleFresh.
You may also activate the TumbleFresh TM option without
running a cycle by touching and holding POWER for one
second, then touching and holding TumbleFresh for 3
seconds, then touching and holding START for 3 seconds.
Toturn off the TumbleFresh TM option when it is running,
touch POWER.
NOTE: The door will lock while the TumbleFresh TM option is
active. To cancel the option and unlock the door, touch
POWER.
_ Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles includethis feature as a default.
See "Cycle Guide" for details.
Drum Light (on some models}
Touch and hold EXTRARINSE for 3 seconds to turn on the
Drum Light.
_ Cycle Signal
Use this option to turn on or off the signal that sounds
at end of cycle.
Toturn off the tones that sound when a setting is
touched: Touch and hold CYCLE SIGNAL for about
3 seconds. Repeat to turn them on.
_ Control Lock
Touch and hold for 3 seconds to lock the controls to avoid
unwanted changes or operation. Touch and hold 3 seconds
again to unlock. You can still touch START to pause the
cycle, or touch POWER to turn the washer off.
CONTROL PANEL AND FEATURES
J
J
I
_ HE detergent
_ Liquid fabric
softener
_ Chlorine bleach
O DISPENSER DRAWER
The dispenser drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach,
and liquid fabric softener to the wash load at the proper time.
See "Using the Dispenser Drawer" for information on using the
dispenser drawer.
_High Efficiency "HE" detergent compartment
This compartment holds liquid or powdered HE detergent
for your main wash cycle.
_ Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric softener at
the optimum time inthe cycle.
[] Use only liquid fabric softener in this dispenser.
Q
Liquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine bleach
at the optimum time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be marked
"HE" or "High Efficiency." Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent
will likely result in longer cycle times and reduced rinsing
performance. It may also result in component failure and, over
time, buildup of mold or mildew. HE detergents are low-sudsing
and quick-dispersing to produce the right amount of suds for
the best performance. They hold soil in suspension so it is not
re-deposited onto clean clothes. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Use only High Efficiency (HE)detergent.
Cycle Status Lights
Model WFW94HE shown
Delay Wash
If a Delay Wash is set, the Delay Wash indicator will light and
the delay time will count down in the display.
Door Locked
Door Locked will light to indicate that the door is locked and
cannot be opened without first pausing or canceling the cycle.
Sensing
When START is touched, the washer will first perform a
self-test on the door lock mechanism and the sensing light
will come on. You will hear a click, the drum will make a partial
turn, and the door will unlock briefly before locking again.
Once the door has locked the second time, the washer will
begin tumbling and adding water. This sensing process will
continue throughout the cycle. You may also hear water
flowing through the dispenser, adding detergent to the load.
After the load size is sensed, the estimated time based on
load size will be displayed. The actual cycle time may be
lengthened; however, the display will continue to show the
estimated time.
The sensing light will blink once a second at various times
during the cycle, such as when the washer is reducing extra
suds.
Add Garment
When "Add Garment" is lit, you may pause the washer, open
the door, and add items.
Steaming
This will light to show that the cycle is using asteam boost for
added cleaning power.
Done
Once the cycle is complete, this light will come on. Remove
the load promptly for best results. The Done indicator is also
lit during Fan Dry or TumbleFresh 'M.
Fan Dry/TumbleFresh'"
The Fan Dry/TumbleFresh " indicator will light when the Fan
Dry/TumbleFresh ,Moption is active. During this time, the
washer will occasionally tumble the load. During Fan Dry only,
a fan also circulates fresh air through the washer.
Eco Monitor
The Eco Monitor allows you to see how the settings you select
affect your energy savings. To use the Eco Monitor, choose
the best cycle, temperature, spin speed, soil level, and options
for the fabrics being washed. The Eco Monitor will rate the
water and energy use of those selections, from Good to Best.
You can then adjust the settings and options to decrease the
amount of energy used within that cycle.
6
USING THE DISPENSER DRAWER
1. Open the dispenser drawer.
2. Add laundry products as described in steps 4-6 in the "Using
Your Washer" section.
3. Slowly close the dispenser drawer. Make sure it is
completely closed.
NOTE: A small amount of water may remain in the dispensers
from the previous wash cycle. This is normal.
fAdding HE detergent to dispenser
O
Pour a measured amount of HE
detergent into detergent compartment.
For powdered detergent, lift the selector
to the high position. For liquid detergent,
push down the selector to the low
position.
Do not overfill; adding too much
detergent may cause detergent to be
dispensed into the washer too early.
HEdetergent
compartment
Use only High Efficiency
(HE) detergent.
Powdered detergent:
Lift the selector to the high
position.
Liquid detergent:
Push down the selector to
the low position.
IMPORTANT:
m Do not add single-dose laundry packet to dispenser
drawer.
m Use powdered detergent when using the Delay Wash
option. Liquid detergent may seep out before the wash
begins.
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings
that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
Not all cycles and options are available on all models.
f temstewash I Wash '
using default cycle . Spin Soil Available
settings: _ycle: Temperature.: Speed: Level: Options: Cycle Details:
Normally soiled cottons Normal Extra Hot Extra Fast Extra Heavy Steam Clean** @ This cycle combines medium-speedlinens, sheets, and Hot Fast Heaw Fan Dry/ tumbling and an extra-fast-speed
mixed garment loads Medium Normal TumbleFresh TM spin. This cycle is designed to
Heavily soiled white
fabrics and garments
Sturdy colorfast
fabrics and heavily
soiled garments
Sturdy towels and
wash cloths
Sturdy garments
and household items
exposed to possible
allergens
Clothing, bedding
and towels requiring
sanitization
Whites
Heavy
Duty
Towels
Allergen t
Sanitize tt
Warm
Cool
Cold
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Hot
Extra Hot/Hot
(each model will
default to the
highest temperature
available)
Off Light Extra Rinse provide the most energy efficiency.
PreSoak
Delay Wash
Extra Fast Extra Heavy Steam Clean** _ Uses a longer wash time with
Fast Heaw EcoBoost TM _ fast-speed tumbling, extra rinsing,
Medium Normal Fan Dry/ and an extra-fast-speed spin to
Slow Light TumbleFresh TM provide optimal cleaning and rinsing
Off Extra Rinse when bleach is used.
PreSoak
Delay Wash
Extra Fast Extra Heavy Steam Clean** _ Fast-speed tumbling and an
Fast Heavy EcoBoost TM _ extra-fast-speed final spin help
Medium Normal Fan Dry/ provide optimal cleaning and
Slow Light TumbleFresh T" reduce drying times.
Off Extra Rinse
PreSoak
Delay Wash
Extra Fast Extra Heavy Steam Clean** _ Provides fast-speed tumbling,
Fast Heaw EcoBoost TM _ longer wash time, normal rinsing,
Medium Normal Fan Dry/ and an extra-fast-speed spin to
Slow Light TumbleFresh T" shorten drying time.
Off Extra Rinse
PreSoak
Delay Wash
Extra Fast Extra Heavy Steam Clean** _ Uses more water to flush out
Fast Heaw Fan Dry/ _ allergens such as dust mites and
Medium Normal TumbleFresh T" pet dander from normally-soiled
Light Extra Rinse items.
Delay Wash
Extra Fast Extra Heavy Steam Clean** _ Using the highest wash temperature
Fast Heaw Fan Dry/ _ available ensures sanitization.
Medium Normal TumbleFresh T" Check recommended wash
Slow Light Extra Rinse temperature of your items.
Off Delay Wash
* All temperature selections feature a cold rinse.
** The Steam Clean option is only available when a Warm, Hot, or Extra Hot water temperature is selected.
_ ? Allergen
Allergen cycle certified by NSF International, an independent, third party testing and certification
organization. The certification verified that this cycle reduced tested allergens by at least 95.0%
and maintained the water temperature necessary to kill dust mites. Only the allergen cycle has
been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance
effectiveness.
'b_ Sanitize
III This washer has a Sanitize Cycle that iscertified by NSF International, an independent, third-party
testing and certification organization. The certification verifies that the Sanitize Cycle eliminates
o
99.9 _ of bacteria typically found on clothing, bedding, and towels. There is no carryover of
bacteria between loads after the cycle iscomplete.
III Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-high
water temperature to help ensure the removal of heavy soils and stains. It is recommended that
you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle.
III Only the Sanitize Cycle selected has been designed to meet the requirements of NSF Protocol
P172 Sanitization Performance of Residential and Commercial, family-sized clothes washer.
8
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings
that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
Not all cycles and options are available on all models.
,tomstowas. c' W
using default Y : as _pin sO"
cycle settings: I Temperature*: Speed: Level:
No clothes in washer
Wet load of clothes
Swimwear, items
that need rinsing
2-4 lightly soiled
synthetic garments,
athletic uniforms,
or workout wear
Small loads of 3-4
lightly soiled garments
Clean Washer
with affresh ®
Drain
& Spin
Drain
& Spin
with
Extra Rinse
Wash
& Dry
Quick Wash
Delicates
Cold
Wash
Sheer fabrics,
lingerie, sweaters, and
lightly-soiled shirts,
blouses, trousers,
aants, and skirts
N/A
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Hot
_/a r m
Cool
Cold
Extra Hot
Hot
_/a r m
Cool
Cold
Extra Hot
Hot
Warm
Cool
Cold
Cold
Extra Fast N/A Fan Dry/
Fast TumbleFresh TM
Medium Delay Wash
Slow
Off
Extra Fast Extra Heavy Fan Dry/
Fast Heavy TumbleFresh TM
Medium Normal Delay Wash
Slow Light
Off
Extra Fast ExtraHeavy Steam Clean**
Heavy Fan Dry
Normal Extra Rinse
Light PreSoak
Delay Wash
Extra Fast Extra Heavy Steam Clean**
Fast Heavy Fan Dry/
Medium Normal TumbleFresh TM
Slow Light Extra Rinse
Off PreSoak
Delay Wash
Extra Fast Extra Heavy Steam Clean**
Fast Heavy Fan Dry/
Medium Normal TumbleFresh TM
Slow Light Extra Rinse
Off PreSoak
Delay Wash
Extra Fast Extra Heavy Fan Dry/
Fast Heavy TumbleFresh TM
Medium Normal Extra Rinse
Off Light Delay Wash
Bright or darkly colored
cottons, linens, casual
and mixed loads
Available CYcle Details:
Options: I
Use this cycle every 30 washes
to keep the inside of your washer
fresh and clean. This cycle uses a
higher water level. Use with affresh ®
washer cleaner tablet or liquid
chlorine bleach to thoroughly clean
the inside of your washer. This
cycle should not be interrupted.
See "Washer Care."
IMPORTANT: Do not place
garments or other items in the
washer during the Clean Washer
with affresh _>cycle. Use this cycle
with an empty wash tub. See
"Washer Care" in "Washer
Maintenance."
Use Drain & Spin to remove excess
water from the load. Spin speed
can be set to a slower setting.
@
©
Select Drain & Spin; then select
Extra Rinse to add water. The cycle
includes an extra-fast-speed spin.
For some fabrics, you may wish to
set the spin speed to a slower
setting.
This short wash cycle has an
extra-fast-speed spin followed
by intermittent tumbling and fan
activation to circulate air through
the clothes.
©
For small loads (3-4 items) needed
quickly. This cycle combines
fast-speed tumbling, a shortened
wash time, and an extra-fast-speed
spin for reduced drying times.
This cycle combines slow-speedtumbling and slow-speed spin
for gentle fabric care and reduced
wrinkling.
i_ This cycle uses a concentrateddetergent solution along with cold
water throughout the cycle to gently
lift out stains and care for fabrics.
* All temperature selections feature a cold rinse.
** The Steam Clean option is only available when a Warm, Hot, or Extra Hot water temperature is selected.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.
_ Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
9
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
First wash cycle without laundry
Before washing clothes for the first time, if not completed during
the final installation step, choose the QUICK WASH cycle and
run it without clothes. Use only HE detergent. Use 1/2 the
manufacturer's recommended amount for a medium-size load.
This initial cycle serves to ensure the interior is clean before
washing clothes.
1, Sort and prepare your laundry
Sort items by recommended cycle, water temperature, and
colorfastness. Separate heavily soiled items from lightly soiled.
Separate delicate items from sturdy fabrics. Treat stains
promptly and check for colorfastness by testing stain remover
products on an inside seam.
IMPORTANT:
[] Empty pockets. Loose change, buttons, or any small object
can plug pumps and may require a service call.
[] Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
[] Mend rips and tears to avoid further damage to items
during washing.
[] Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
[] Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
[] Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
10
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Add single-dose laundry packet, Oxi,
color-safe bleach, or fabric softener
crystals (if desired)
Single-dose laundry packet, Oxi-type boosters, color-safe
bleach, or fabric softener crystals can be added to the drum
prior to adding laundry.
NOTE: Do not add clothes to washer drum prior to adding
laundry products. Always follow manufacturer's instructions.
3. Load laundry into washer
Place a load of sorted clothes loosely in the washer. Items need
to move freely for best cleaning and to reduce wrinkling and
tangling. Close the washer door by pushing it firmly until the
latch clicks.
[] Depending on load type and cycle, the washer can be fully
loaded, but not tightly packed. Washer door should close
easily. See "Cycle Guide" for loading suggestions.
[] Mix large and small items and avoid washing single items.
Load evenly.
[] Wash small items in mesh garment bags. For multiple items,
use more than one bag and fill bags equally.
USING LAUNDRY PRODUCT DISPENSERS
NOTE: Do not add single-dose laundry packets, Oxi-type
boosters, color-safe bleach, or fabric softener crystals to
dispensers. They will not dispense correctly.
f
4. Add HE detergent
\
\
HEdetergent
7. Touch POWER to turn on washer
(optional)
_ii_iiiiiiiiiii/_
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then touch POWER to turn on the washer
or go to Step 8.
Adjust the selector, based on type of HE detergent used
(either liquid or powdered). See "Using the Dispenser
Drawer" instructions on how to use the dispenser.
Add liquid fabric softener to dis
(if desired)
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer's
directions for correct amount of fabric softener based on your
load size.
Fabric softener is always dispensed in the last rinse, even if
Extra Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup
(60 mL) of fabric softener. Do not fill past the MAX line.
Overfilling dispenser will cause fabric softener to immediately
dispense into washer.
[] Do not spill or drip any fabric softener onto the clothes.
[] Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
Add liquid chlorine bleach to dis
(if desired)
8, Select CYCLE*
NORMAL
COLD WASH -- WHITES
DELICATES -- HEAVY
DUTY
QUICK
WASH
DRAIN & SPIN
Appearance may vary.
CLEAN WASHER with 8_rl_
ALLERGEN
-- SANITIZE
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features.
9. Adjust settings, if desired*
:Steam Clean _EcoBoost Fan Dry _xtra R_r_e Cycle S_gr_al Cor_troJ Lock
Appearance may vary.
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name - Wash Temp, Spin,
Soil, or Presoak. Adjusting settings will change the Estimated
Time Remaining. Tightly packing the load, unbalanced loads,
or excessive suds may also cause the washer to increase the
cycle time.
Add liquid chlorine bleach to the bleach compartment.
Do not overfill, dilute, or use more than 2/3 cup (165 mL).
Do not use color-safe bleach or Oxi in the same cycle with
liquid chlorine bleach.
m Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
m Do not fill beyond the "MAX" level. Overfilling could cause
garment damage.
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11
USING YOUR WASHER
1 0. Select any additional options*
Steam Clean _EcoBoost Fan Dry Extra Rinse Cycle S_gnal Control Lock
Hold 3 set or_d Hold 3 seconds Hold 3 s_or_r_s
for D, #_, Ught for Button _ounds
iii,
ii
-i
ii
Appearance may vary.
To add an option to the cycle, touch its name - Steam Clean,
EcoBoost TM option, Fan Dry/TumbleFresh TM, Extra Rinse, Cycle
Signal, or Control Lock. To remove an option from the selected
cycle, touch the option again.
1 1. Setting a delayed wash
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option. This will delay the start
of the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch DELAY WASH + and - buttons to set the desired
delay time.
2. Touch and hold START to set the delay. The delay
countdown has started when the START light stops blinking.
1 2. Touch and hold START to begin
wash cycle
_iiiiiiii:_iii;iii_
Hold to Start
Touch and hold START to start the wash cycle. To pause a cycle
in progress, touch START once, then touch and hold again to
continue the cycle. To cancel a cycle, touch POWER.
Once you touch and hold START, you will hear the door lock, un-
lock, and lock again. The washer door will remain locked during
the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
"Add Garment" light is lit.
Touch START once; the door will unlock
once the washer movement has stopped.
This may take several minutes. Then close
door and touch and hold START again to
restart the cycle.
_SD Add Garment i
12
Hold to Sta_'t
f13, Remove garments promptly
after cycle is finished
for small items between the tub and the washer drum.
If you will be unable to remove the load
promptly, use the Fan Dry or TumbleFresh _=
option (depending on model). If selected,
the Fan Dry option will activate the fan and
tumble the load periodically for up to 12 hours.
The TumbleFresh '= option will tumble the
load periodically for up to 6 hours. To turn off
the Fan Dry or TumbleFresh '=option, touch
POWER. To set the washer so that the Fan Dry/TumbleFresh '=
option does not come on for future cycles, touch Fan Dry or
TumbleFresh.
immllllf- _
Fan Dry
OR
::i
TumbleFresh
NOTE:
[] The door will remain locked while the Fan DryFFumbleFresh '=
option is active. To cancel the option and unlock the door,
touch POWER.
[] A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
[] This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry between
uses.
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
WASHER MAINTENANCE
WATER iNLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
WASHER CARE
Recommendations to Help Keep Your Washer Clean
and Performing at its Best
1. Always use High Efficiency (HE) detergents and follow the
HE detergent manufacturer's instructions regarding the
amount of HE detergent to use. Never use more than the
recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer, which in turn may result in undesirable odor.
2. Use warm or hot water washes sometimes (not exclusively
cold water washes), because they do a better job of
controlling the rate at which soils and detergent accumulate.
3. Always leave the washer door slightly ajar between uses
to help dry out the washer and prevent the buildup of
odor-causing residue.
Cleaning Your Front Loading Washer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This
Washer Maintenance Procedure should be performed,
at a minimum, once per month or every 30 wash cycles,
whichever occurs sooner, to control the rate at which soils
and detergent may otherwise accumulate in your washer.
Cleaning the Door Seal
1. Open the washer door and remove any clothing or items
from the washer.
2. Inspect the colored seal between the door opening and
the drum for stained areas or soil buildup. Pull back the
seal to inspect all areas under the seal and to check for
foreign objects.
3. If stained areas or soil buildup are found, wipe down
these areas of the seal using either of the following
two procedures:
a. affresh ®Grit Grabber TM Cloth Procedure:
i. When the cycle is complete, gently pull back the
rubber door seal and clean the entire surface with
the rough side of the Grit Grabber TM cloth.
b. Dilute Liquid Chlorine Bleach Procedure:
i. Mix a dilute bleach solution, using 3/4 cup (177 mL)
of liquid chlorine bleach and 1 gallon (3.8 L) of warm
tap water.
ii. Wipe the seal area with the dilute solution, using
a damp cloth.
iii. Let stand 5 minutes.
iv. Wipe down area thoroughly with a dry cloth and let
washer interior air dry with door open.
IMPORTANT:
[] Wear rubber gloves when cleaning with bleach.
[] Refer to the bleach manufacturer's instructions
for proper use.
F WASHER CARE (cont.) "_
Cleaning the Inside of the Washer
This washer has a special cycle that uses higher water
volumes in combination with affresh ®Washer Cleaner or
liquid chlorine bleach to thoroughly clean the inside of the
washer. Steam washer models also utilize steam to enhance
cleaning in this special cycle.
NOTE: Read these instructions completely before beginning
the cleaning process.
Begin procedure
1. affresh ®Washer Cleaner Cycle Procedure
{Recommended for Best Performance):
ao Open the washer door and remove any clothing
or items.
bo Add an affresh ®Washer Cleaner tablet to the washer
drum.
co Do not add the affresh ®Washer Cleaner tablet
to the dispenser drawer.
d. Do not add any detergent or other chemical to the
washer when following this procedure.
eo Close the washer door.
fo Select the CLEAN WASHER cycle.
g. Touch and hold START to begin the cycle. The Clean
Washer Cycle Operation is described below.
2. Chlorine Bleach Procedure:
ao Open the washer door and remove any clothing
or items.
b. Open the dispenser drawer and add liquid chlorine
bleach to the MAX level in both the bleach
compartment and the fabric softener compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time.
co Close the washer door and the dispenser drawer.
d. Do not add any detergent or other chemicals to the
washer when following this procedure.
eo Close the washer door.
fo Select the CLEAN WASHER cycle.
g. Touch and hold START to begin the cycle. The Clean
Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle.
Description of Clean Washer Cycle Operation:
1. The Clean Washer cycle will determine whether clothing
or other items are in the washer.
2. If no items are detected in the washer, it will proceed
with the cycle.
a. If any items are detected in the washer, "rL" (remove
load) will be displayed. The door will unlock. Open
washer and remove any garments from the washer
drum.
b. Touch POWER to clear the "rL" code.
co Touch and hold START to restart the cycle.
After the cycle is complete, leave the door open slightly to
allow for better ventilation and drying of the washer interior.
13
WASHER MAINTENANCE
WASHER CARE (cont.)
Cancellation of Clean Washer Cycle Operation:
if the Clean Washer cycle is canceled by the user after it has
been initiated, it may take up to 30 minutes for the washer
to purge any affresh®Cleaner, chlorine bleach, or other
chemistry from the wash system and to adequately rinse any
remaining chemistry. The washer door will remain locked until
the cancellation process has been completed. This ensures
no cleaning chemistry will be carried over to the next wash
cycle and reduces the potential for damage to subsequent
loads of laundry or to the washer itself.
Clean Washer Cycle Cancellation Procedure:
1. Touch POWER on the washer once.
2. The washer will begin to drain and rinse away the
remaining cleaning chemistry.
3. The cycle will complete the cancellation process in
approximately 30 minutes or less.
4. The washer then can be used to either repeat the Clean
Washer cycle or to wash laundry using one of the regular
wash cycles selected by the user.
Cleaning the Dispensers
After a period of using your washer, you may find some
residue buildup in the washer's dispensers. To remove
residue from the dispensers, remove the drawer and wipe
the surfaces with a damp cloth and towel dry either before
or after you run the Clean Washer cycle. Use an all-purpose
surface cleaner, if needed.
IMPORTANT: Dispenser is not dishwasher safe.
Cleaning the Outside of the Washer
Use a soft, damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to help
keep it looking new. Use mild soap and water.
IMPORTANT: To avoid damaging the washer's finish, do not
use abrasive products.
CLEAN WASHER CYCLE REMINDER
The Clean Washer LED will _ -- _
flash at the end of a wash
cycle when the washer has
run 30 wash cycles. This is a
reminder to run the Clean Washer cycle.
If the Clean Washer cycle is not turned on, the LED will
stop flashing at the end of a wash cycle after running 3
more regular wash cycles. After 30 more wash cycles are
completed, the Clean Washer LED will again flash at the end
of a wash cycle as a reminder.
f REMOVING THE DISPENSER
To remove:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out to
remove the dispenser.
\
3. Lift off cover panel by
pulling straight up.
To replace:
1. Slide cover panel back
onto posts on dispenser.
2. Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
14
NON=USE AND VACATION CARE
Operate your washer only when you are home. If moving,
or not using your washer for a period of time, follow these
steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer to avoid flooding due
to water pressure surges.
3. Clean the dispensers. See "Cleaning the Dispensers."
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum
and run washer on NORMAL cycle for about two
minutes to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain hose from drain system and from back
of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer drum.
6. Bundle power cord with a rubber band or cable tie to
keep it from hanging onto the ground.
IMPORTANT: Call for service to install new transport bolts.
Do not reuse transport bolts. Washer must be transported
in the upright position. To avoid structural damage to
your washer, it must be properly set up for relocation by a
certified technician.
f REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
3. Run washer through HEAVY DUTY cycle to clean washer
and remove antifreeze, if used. Use only HE detergent.
Use half the manufacturer's recommended amount for a
medium-size load.
15
TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/product help -
In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.
Once any possible issues are corrected, touch POWER once to clear the code. Reselect and restart the cycle.
Excessive suds in washer. Washer is
running a suds reduction routine.
Sud
(Excess suds)
appears in display
FC,8followed by Enl
(water supply error)
appears in display
FD£ followed by con's.,
(drain pump system
error) appears in display
Check for proper water supply.
Check plumbing for correct drain
hose installation. Drain hose extends
into standpipe farther than 41/2"
(114 mm).
Allow the washer to continue. Use only HE detergent.
Always measure detergent, and base detergent quantity on
load size. Follow detergent manufacturer's instructions.
Both hoses must be attached and have water flowing to the
inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Touch POWER once to clear the code. Then touch POWER
again to restart washer. If code appears again, call for service.
Check drain hose for proper installation.
Make sure the drain hose is not kinked, pinched, or blocked.
Remove any clogs from drain hose.
Use drain hose form and securely attach to drainpipe or tub.
Lower drain hose if the end is higher than 96' (2.4 m) above
the floor.
Use only HE detergent. Always measure detergent and follow
manufacturer's directions based on load size and soil level.
Not using HE detergent or using too
much HE detergent.
FC,5followed by E2,2 Washer door not locking. Touch POWER to cancel the cycle. Make sure the door is
(door will not lock) closed completely and latching. Check for items in the washer
appears in display drum that may be keeping the door from closing completely.
FC,7followed by E_/ Motor is having difficulty turning Washer is tightly packed. Remove some items. See "Cycle
(motor drive error) the drum. Guide" for load size recommendations. Make sure that all
appears in display shipping materials have been removed. See the Installation
Instructions.
"rL" (remove load) Load detected in drum during Clean Remove items from washer drum and restart Clean Washer
appears in display Washer with affresh ®cycle, with affresh ®cycle.
......Washer making error Door has not been opened and closed This code may appear when the washer is first turned on.
beeps for at least 3 cycles. Open and close the door to clear the display.
Washer beeps when Door not closed. Close the door completely.
START is touched
F## E## code other System error code. Touch POWER once to clear the code. Then touch POWER
than as described above again to restart washer. If code appears again, call for service.
appears in display
Int (interrupted) The cycle was paused or cancelled. The washer can take 20 to 30 minutes to stop spinning and
appears in display drain and will display this error code during that time. Touch
POWER once to clear the code. Then touch POWER again to
restart washer.
Clean Washer LED
flashing at end of wash
cycle
The washer has run 30 wash cycles
and is indicating a reminder to run the
Clean Washer cycle.
Run the Clean Washer cycle. If the Clean Washer cycle is not
turned on, the LED will stop flashing at the end of a wash cycle
after running 3 more regular wash cycles. After 30 more wash
cycles are completed, the Clean Washer LED will again flash at
the end of a wash cycle as a reminder.
J
16
TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.whirlpool.com/product help - -_
In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.
If you experience ....... Possible Causes Solution ....
Vibration, rocking, or Feet may not be in contact with the Front and rear feet must be in firm contact with floor, and washer
"walking" floor and locked, must be level to operate properly. Jam nuts must be tight
Washer may not be level.
Load could be unbalanced
or too large.
The shipping bolts are still in the
back of the washer.
against the bottom of the cabinet.
Check floor for flexing or sagging. If flooring is uneven, a 3/4"
(19 mm) piece of plywood under your washer will reduce sound.
See "Level the Washer" in Installation Instructions.
Avoid tightly packing the load. Avoid washing single items.
Balance asingle item such as a rug or jeans jacket with a
few extra items.
Item or load not suitable for selected cycle. See "Cycle Guide"
and "Using Your Washer."
See "Remove transport bolts from washer" in the
Installation Instructions.
Clicking or metallic
noises
Gurgling or humming
Rolling or sloshing
and occasional clicking
(on slow-speed spin)
Door locking or unlocking.
Objects caught in washer
drain system.
Washer may be draining water.
Steel balls in the balancing system
are balancing the load.
The door will lock unlock and lock again. You will hear 3 clicks
after touching and holding START. This is normal.
Empty pockets before washing. Loose items such as coins
could fall between washer drum and tub or may block pump.
It may be necessary to call for service to remove items.
It is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel drum.
The pump may make a humming sound with periodic gurgling
or surging as final amounts of water are removed during the
spin/drain cycles. This is normal at certain stages of the cycle.
This is normal at certain stages of the cycle.
Check the following for Fill hoses not attached tightly. Tighten fill-hose connection.
proper installation
Fill hose washers. Properly seat all four fill-hose flat washers.
Drain hose connection. Check that the drain hose is properly secured to drainpipe or
laundry tub.
Check household plumbing for leaks Water can back up out of a clogged sink or drainpipe. Check
or clogged sink or drain, all household plumbing for leaks (laundry tubs, drain pipe,
water pipes, and faucets.)
Water or suds leaking Not using HE detergent or using too Only use HE detergent. Suds from regular detergents can
from door or rear of much HE detergent, cause leaking from the door or rear of cabinet. Always measure
cabinet detergent and follow manufacturer's directions based on your
load requirements.
Residue on door glass. Periodically clean the underside of the glass window to avoid
potential leaks.
Door opened during "Add Garment."
Load not completely
covered in water
Water can drip off the inside of the door when the door is
opened after the start of a cycle.
Water level not visible on door or
does not cover clothes,
This is normal for an HE front load washer. The washer senses
load sizes and adds the correct amount of water for optimal
cleaning.
J
17
TROUBLESHOOTING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
ff First try the solutions suggested here or visit our website at www.whirlpool.com/product_help = "_
In Canada www.wMrlpool.ca for assistance and to possibly avoid a service call.
Washer won't run or fill,
washer stops working
Check for proper water supply.
Check proper electrical supply.
Normal washer operation.
The washer door is not firmly shut.
Washer not loaded as recommended.
Both hoses must be attached and have water flowing to
inlet valve.
Both hot and cold water faucets must be turned on.
Check that inlet valve screens have not become clogged.
Check for any kinks in inlet hoses, which can restrict water flow.
Plug power cord into a grounded 3=prong outlet.
Do not use an extension cord.
Ensure there is power to outlet.
Check electrical source or call an electrician to check if voltage
is low.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: If problems continue, contact an electrician.
Door must be completely closed and latched for washer to run.
Washer will pause during certain phases of cycle.
Do not interrupt cycle.
The washer pauses for about 2 minutes during certain cycles.
Allow the cycle to continue. Some cycles feature periods of
tumbling and soak.
Washer may be stopped to reduce suds.
Cold Wash uses less water in the beginning of the cycle to
provide a high concentration of detergent for optimal cleaning
action. Following this concentrated tumbling, more water is
used to complete the wash.
The door must be closed during operation.
Remove several items, rearrange load evenly in washer drum.
Close door and touch and hold START.
Do not add more than 1or 2 additional items after cycle has
started to avoid tightly packing or unbalancing.
Do not add more water to the washer.
J
18
TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.whirlpool.com/product help -
In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.
If you experience Possible causes Solution
Washer won't run or fill,
washer stops working
(cont.)
Not using HE detergent or using too
much HE detergent.
Only use HE detergent. Suds from regular detergents can
slow or stop the washer. Always measure detergent, following
manufacturer's directions based on your load requirements.
To remove suds, cancel cycle. Select DRAIN & SPIN with Extra
Rinse. Touch and hold START. Do not add more detergent.
Door not opened between cycles. After 3 wash cycles in a row are completed, the door must be
opened and then closed before a new cycle can begin.
Washer not draining/ Drain hose extends into standpipe Check drain hose for proper installation. Use drain hose form
spinning, loads are farther than 4.5" (114 mm). and securely attach to drainpipe or tub. Do not tape over drain
still wet opening.
The drain hose is clogged, or the Lower drain hose if the end is higher than 96" (2.4 m) above
end of the drain hose more than the floor. Remove any clogs from drain hose. See "Installation
96" (2.4 m) above the floor. Requirements" in Installation Instructions.
The drain hose fits too tightly The drain hose should be loose yet fit securely. Do not seal the
in the standpipe, or is it taped drain hose with tape. The hose needs an air gap. See "Secure
to the standpipe, the Drain Hose" in Installation Instructions.
Using cycles with a slower spin Cycles with slower spin speeds remove less water than cycles
speed, with fast spin speeds. Use the recommended cycle/speed spin
for your garment.
Washer not loaded as recommended.
The load may be out of balance.
Not using HE detergent or using too
much HE detergent.
Small items may have been caught
in the pump or stuck between the
washer drum and the outer tub.
There are too many clothes in the Only use the Wash & Dry cycle for 2-4 lightly soiled synthetic
Wash & Dry cycle, garments, athletic uniforms, or workout wear.
Door locked at end Water remaining in washer after cycle. Select DRAIN & SPIN to remove any water remaining in the
of wash cycle washer. The washer door will unlock at the end of the drain.
Fan DryiTumbleFresh Moption is on.
A tightly packed or unbalanced load may not allow the washer
to spin correctly, leaving the load wetter than normal. See
"Cycle Guide" for load size recommendation for each cycle.
Avoid washing single items. Balance a single item such as a rug
or jeans jacket with a few extra items.
Use only HE detergent. Suds from regular detergent or using too
much detergent can slow or stop draining or spinning. Always
measure and follow manufacturer's directions for your load.
To remove extra suds, select DRAIN & SPIN with Extra Rinse.
Do not add detergent.
Check the drum for any items sticking through the drum holes.
Empty pockets and use garment bags when washing small
items.
While this option is on, the fan blows (Fan Dry option only)
and the load is tumbled periodically for up to 12 hours (Fan Dry
option) or 6 hours (TumbleFresh Moption). The door remains
locked during this time. To unlock the door, cancel the option
by touching POWER.
Door will not unlock Door locks when cycle has started. If the "Add Garment" light is lit, touch START once. The door
will unlock.
Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.Incorrect or wrong
wash or rinse
temperatures
Both hoses must be attached to both washer and faucet, and
have both hot and cold water flowing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.
Washing many loads. Your hot water tank may not have enough hot water to keep up
with the number of hot or warm washes. This is normal.
k,. j
19
TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.whirlpool.com/product_help -
In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.
Desired setting or
option does not light
Load not rinsed
Load is wrinkled,
twisted, or tangled
Not cleaning or
removing stains
For best performance, not all
settings are available with each cycle,
and some options cannot be used
together.
Check for proper water supply.
Not using HE detergent or using too
much HE detergent.
Washer not loaded as recommended.
The load may be out of balance.
See the "Cycle Guide" for the available settings and options for
Add only 1 or 2 garments after washer has started.
Not using HE detergent or using too Use only HE detergent. Always measure detergent and follow
much HE detergent, manufacturer's directions based on load size and soil level.
Hard water or high level of iron (rust) You may need to install a water softener and/or iron filter.
in water.
Fabric softener dispensing ball used. Dispensing balls will not operate correctly with this washer.
Add liquid fabric softener to the fabric softener compartment.
Powdered detergent used for Consider using liquid detergent.
slow-speed cycle.
_. J
20
Wash action and/or spin speed too Select a slower spin speed. Note that items will be wetter
fast for load. than when using a faster speed spin.
The washer is not unloaded promptly. Unload the washer as soon as it stops or use Fan Dry/
TumbleFresh Mif you will not be able to unload the washer at
the end of the cycle.
Not choosing the right cycle for the Use the Delicates cycle or another cycle with a slow spin
load being washed, speed to reduce wrinkling.
The wash water was not warm If safe for load, use warm or hot wash water.
enough to relax wrinkles.
Washer not loaded as recommended.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to the
inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
The suds from regular detergent can cause the washer
to operate incorrectly.
Use only HE detergent. Always measure detergent and follow
manufacturer's directions based on load size and soil level.
Avoid tightly packing tm_ewasher. The washer will not rinse well
if tightly packed. Load with dry items only. See the "Cycle
Guide" for load size recommendations for each cycle.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer has started.
When load unbalance occurs, a washing process will start
to redistribute the load. This may lengthen the cycle time.
Avoid washing single items. Balance a single item such as
a rug or jeans jacket with a few extra items.
Add load loosely. Items need to move freely reduce
wrinkling and tangling. See the "Cycle Guide" for load
size recommendations for each cycle.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Add load loosely. Items need to move freely for best cleaning.
See the "Cycle Guide" for load size recommendations for each
cycle.
Washer not loaded as recommended.
each cycle.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Whirlpool WFW88HEAW0 Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues