KitchenAid Front-Loading Automatic Dishwasher Manuel utilisateur

Marque: KitchenAid

Modèle: Front-Loading Automatic Dishwasher

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

Washer/Dryer Front-Loading Automatic Dishwasher

PRO LINE

™

FRONT-LOADING

AUTOMATIC WASHER

Use&CareGuide

For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230

In Canada, for assistance, installation or service, call: 1-800-807-6777 or visit our website at...

www.kitchenaid.com or www.KitchenAid.ca

LAVEUSE AUTOMATIQUE PROLINE

™

CHARGEMENT FRONTAL

Guided’utilisationetd’entretien

Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web à...

www.KitchenAid.ca

Table of Contents/Table des matières.............................................................................2

TABLE OFCONTENTS

WASHER SAFETY ..........................................................................3

INSTALLATION REQUIREMENTS................................................4

Tools and Parts ............................................................................4

Options.........................................................................................4

Location Requirements................................................................4

Drain System................................................................................6

Electrical Requirements...............................................................6

INSTALLATION INSTRUCTIONS..................................................7

Remove Decorative Mat ..............................................................7

Attach Door Handle......................................................................7

Remove Transport System..........................................................7

Route the Drain Hose...................................................................7

Connect the Inlet Hoses...............................................................8

Secure the Drain Hose.................................................................8

Level the Washer..........................................................................9

Complete Installation ...................................................................9

FEATURES AND BENEFITS ........................................................10

WASHER USE...............................................................................11

Starting Your Washer.................................................................11

Using the Proper Detergent.......................................................11

Using the Dispenser...................................................................12

Pausing or Restarting.................................................................14

Changing Cycles, Options and Modifiers..................................14

Status Display ............................................................................14

Cycles.........................................................................................15

Normal Sounds ..........................................................................16

Options.......................................................................................16

Modifiers.....................................................................................17

Laundry Guide............................................................................18

LAUNDRY TIPS ............................................................................19

Loading ......................................................................................19

WASHER CARE ............................................................................20

Cleaning Your Washer ...............................................................20

Water Inlet Hoses.......................................................................21

Vacation, Storage, and Moving Care.........................................21

TROUBLESHOOTING ..................................................................22

Washer and Components..........................................................22

Washer Operation......................................................................23

Clothing Care .............................................................................24

ASSISTANCE OR SERVICE.........................................................25

In the U.S.A. ...............................................................................25

In Canada...................................................................................25

WARRANTY ..................................................................................26

TABLE DES MATIÈRES

SÉCURITÉ DE LA LAVEUSE........................................................28

EXIGENCES D'INSTALLATION...................................................29

Outillage et pièces......................................................................29

Options.......................................................................................29

Exigences d'emplacement.........................................................30

Système de vidange...................................................................31

Spécifications électriques..........................................................32

INSTRUCTIONS D'INSTALLATION.............................................32

Retrait du revêtement décoratif .................................................32

Fixation de la poignée de porte .................................................32

Élimination des accessoires de transport..................................33

Acheminement du tuyau de vidange.........................................33

Raccordement des tuyaux d'alimentation.................................33

Immobilisation du tuyau de vidange..........................................34

Réglage de l'aplomb de la laveuse............................................34

Achever l'installation ..................................................................35

CARACTÉRISTIQUES ET AVANTAGES .....................................36

UTILISATION DE LA LAVEUSE...................................................37

Mise en marche de la laveuse....................................................37

Utilisation du détergent approprié .............................................37

Utilisation du distributeur...........................................................38

Pause ou remise en marche.......................................................40

Changement des programmes, options et modificateurs.........40

Témoins de l'état d'avancement................................................40

Programmes...............................................................................41

Sons normaux............................................................................43

Options.......................................................................................43

Modificateurs..............................................................................44

Guide de lessivage.....................................................................45

CONSEILS DE LESSIVAGE..........................................................46

Chargement ...............................................................................46

ENTRETIEN DE LA LAVEUSE .....................................................47

Nettoyage de la laveuse.............................................................47

Tuyaux d'arrivée d'eau...............................................................48

Précautions à prendre avant les vacances,

un entreposage ou un déménagement......................................48

DÉPANNAGE.................................................................................50

La laveuse et ses composants...................................................50

Fonctionnement de la laveuse...................................................51

Soin des vêtements....................................................................53

ASSISTANCE OU SERVICE.........................................................54

Aux États-Unis............................................................................54

Au Canada..................................................................................54

GARANTIE.....................................................................................55

WASHER SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation.

The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

Tools needed for installation

Parts supplied

Alternate Parts

Your installation may require additional parts. If you are interested

in purchasing one of the items listed here, call the toll-free

number on the cover or in the “Assistance or Service” section.

Options

A pedestal may be purchased separately for this washer. This

pedestal will add about 11" (27.9 cm) to the height of your

washer for a total vertical height of approximately 53" (134.6 cm).

Optional pedestal

To order, call the dealer from whom you purchased your washer

or refer to the “Assistance or Service” section of this manual. Ask

for Model Number LAV2701RSS.

LocationRequirements

Selecting the proper location for your washer improves

performance and minimizes noise and possible washer “walk.”

Your washer can be installed under a custom counter, in a

basement, laundry room, closet, or recessed area. See “Drain

System.”

IMPORTANT: Do not install or store the washer where it will be

exposed to the weather.

Companion appliance location requirements should also be

considered. Proper installation is your responsibility.

You will need

■ A water heater set to deliver 120°F (49°C) water to the

washer.

■ A grounded electrical outlet located within 6 ft (1.8 m) of

where the power cord is attached to the back of the washer.

See “Electrical Requirements.”

■ Hot and cold water faucets located within 5 ft (1.5 m) of the

hot and cold water fill valves, and water pressure of

20-100 psi (137.9-689.6 kPa).

■ A level floor with a maximum slope of 1" (2.5 cm) under entire

washer. Installing the washer on carpeting is not

recommended.

■ A sturdy floor to support the washer with a total weight

(washer, water and load) of 550 lbs (249 kg).

Do not operate your washer in temperatures below 32°F (0°C).

Some water can remain in the washer and can cause damage in

low temperatures. See “Washer Care” for winterizing information.

■ Pliers that open to

1⁹⁄₁₆" (3.95 cm)

■ Flashlight (optional)

■ Adjustable or open end

wrenches, 13 mm and

⁹⁄₁₆" (14 mm)

■ #3 Phillips screwdriver

■ Ruler or measuring tape

■ Wood block

■ Level

A. Door handle

B. Door handle washers (2)

C. Door handle screws (2)

D. Cable tie

E. Transport bolt hole plug (4)

F. Inlet hose (2)

If You Have You Will Need to Buy

Laundry tub or

standpipe taller

than 96" (2.4 m)

Sump pump system (if not already

available)

Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm) tall

drain tub or utility sink and sump pump

(available from local plumbing suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose Part

Number 8318155; and connector kit, Part

Number 285835

Drain hose too

short

4 ft drain hose extension kit, Part

Number 285863

Water faucets

beyond reach of fill

hoses

2 longer water fill hoses:

6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

Installation spacing

The following spacing dimensions are recommended for this

washer. This washer has been tested for installation with spacing

of 0" (0 cm) clearance on the sides, front, rear, and top.

Recommended spacing should be considered for the following

reasons:

■ The location must be large enough to allow the washer door

to be fully opened.

■ Additional spacing should be considered for ease of

installation and servicing.

■ Additional clearances might be required for wall, door, and

floor moldings.

■ Additional spacing of 1" (2.5 cm) on all sides of the washer is

recommended to reduce noise transfer.

■ Companion appliance spacing should also be considered.

Washer Dimensions

Recommended installation spacing for custom

undercounter installation, washer only

■ The dimensions shown are for a washer without the optional

decorative mat placed on top.

Recommended installation spacing for recessed or

closet installation, with or without a pedestal

■ For closet installation with a door, minimum ventilation

openings in the top and bottom of the door are required.

Louvered doors with equivalent openings are acceptable.

*Required spacing

Recommended installation spacing for cabinet

installation, with or without a pedestal

■ For cabinet installation, with a door, the minimum ventilation

openings in the top are required.

*Required spacing

*Includes the door handle.

**Includes the feet extended 1" (2.5 cm).

The optional decorative mat (included)

will add approximately ¹⁄₂" (1.3 cm).

NOTE: Door is not reversible.

57"

(144.8 cm)

27"

(68.6 cm)

33" (83.8 cm)*

42"

(106.7 cm)**

(2.5 cm

)

(2.5 cm)

42" min.

(106.7 cm)

27"

(68.6 cm)

1" (2.5 cm

)

A. Recessed area

B. Side view - closet or confined area

C. Closet door with vents

A.Front view

B. Side view

C. Cabinet with vents

(2.5 cm)

33"

(83.8 cm)

(2.5 cm)

(2.5 cm

)

27"

(68.6 cm)

(10.2 cm)

(7.6 cm)

48 in.

(310 cm

24 in.

(155 cm

7" (17,8 cm)

7" (17,8 cm)*

(10,2 cm)

33"

(83,8 cm)

27"

(68,6 cm)

(2,5 cm)

DrainSystem

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain

system. Select the drain hose installation method you need. See

“Tools and Parts.”

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than

17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and

no higher than 96" (2.4 m) from the bottom of the washer.

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (76.2 cm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See “Tools and Parts.”

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

ElectricalRequirements

■ A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical

supply is required. Time-delay fuse or circuit breaker is

recommended. It is recommended that a separate circuit

serving only this appliance be provided.

■ This washer is equipped with a power supply cord having a

3 prong grounding plug.

■ To minimize possible shock hazard, the cord must be

plugged into a mating, 3 prong, grounding-type outlet,

grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility

and obligation of the customer to have the properly grounded

outlet installed by a qualified electrician.

■ If codes permit and a separate ground wire is used, it is

recommended that a qualified electrician determine that the

ground path is adequate.

■ Do not ground to a gas pipe.

■ Check with a qualified electrician if you are not sure the

washer is properly grounded.

■ Do not have a fuse in the neutral or ground circuit.

INSTALLATION INSTRUCTIONS

RemoveDecorativeMat

Remove the optional decorative mat (included) from the top of

the washer and set aside.

AttachDoorHandle

Remove parts package from washer drum. Check that all parts

were included.

Attach Door Handle

1. Insert the 2 screws through the holes in the door.

2. Place the plastic washers onto the screws.

3. Attach the handle by hand tightening the screws, first the top

then the bottom.

4. Push the handle against the door. Using a Phillips

screwdriver, tighten the screws.

NOTE: Do not overtighten.

RemoveTransportSystem

IMPORTANT: Position the washer so that the rear of the washer

is within approximately 3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the

suspension system during transportation. These bolts also retain

the power cord inside the washer until the bolts are removed.

1. Using a 13 mm wrench, loosen each of the bolts.

2. Once the bolt is loose, move it to the center of the hole and

completely pull out the bolt, including the plastic spacer

covering the bolt. The power cord will be attached to all

4 bolts inside the washer.

3. Once all 4 bolts are removed, discard the bolts and spacers.

Then pull the power cord through the opening of the rear

panel and close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your

local service center. To avoid suspension and structural damage,

your machine must be properly prepared (transport system

installed) for relocation, by a certified technician.

RoutetheDrainHose

Proper routing of the drain hose helps avoid floor damage due to

water leakage. Read and follow these instructions.

The drain hose is connected to your washer. Gently pull the

corrugated drain hose from the shipping clips.

To keep drain water from going back into the washer:

■ Do not straighten the drain hose, and do not force excess

drain hose into standpipe. Hose should be secure, but loose

enough to provide a gap for air.

■ Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under “Tools and

Parts.”

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

ConnecttheInletHoses

IMPORTANT: Verify that there are rubber washers installed in

both ends of both of the inlet hoses. If one or more of the

washers is missing, call the toll-free number on the cover or in the

“Assistance of Service” section.

Connect the inlet hoses to the water faucets

Make sure the washer drum is empty.

1. Attach the red inlet hose to the hot water faucet. Screw on

coupling by hand until it is seated on the washer.

2. Attach the blue inlet hose to the cold water faucet. Screw on

coupling by hand until it is seated on the washer.

3. Using pliers, tighten the couplings with an additional

two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve.

Damage to the valves can result.

Clear the water lines

■ Run water through both faucets and inlet hoses, into a

laundry tub, drainpipe or bucket, to get rid of particles in the

water lines that might clog the inlet valve screens.

■ Check the temperature of the water to make sure that the hot

water hose is connected to the hot water faucet and that the

cold water hose is connected to the cold water faucet.

Connect the inlet hoses to the washer

1. Attach the red water inlet hose to the washer’s hot (H) water

inlet valve. Screw on coupling by hand until it is seated on the

washer.

2. Attach the blue water inlet hose to the washer’s cold (C) water

faucet. Screw on coupling by hand until it is seated on the

washer.

3. Using pliers, tighten the couplings with an additional

two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can

result.

4. Turn on the water faucets completely and check for leaks.

NOTE: Replace original inlet hoses after 10 years of use to

reduce the risk of hose failure. Record hose installation or

replacement dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,

wear, or leaks are found.

Securethe DrainHose

1. Drape the power cord over the washer top.

2. Secure the drain hose to the laundry tub leg or standpipe with

the cable tie provided. See illustrations A and B.

If the washer faucets and the drain standpipe are recessed

(see illustration C), put the hooked end of the drain hose in

the standpipe. Tightly wrap the cable tie around the water

inlet hoses and the drain hose.

NOTES:

■ Do not force excess drain hose back into the rear of the

washer.

■ Do not force excess drain hose into the standpipe.

■ To avoid siphoning, do not seal the drain hose into the

standpipe.

A. Coupling B. Washer

H. Hot water inlet C. Cold water inlet

AB C

LeveltheWasher

One foot has been installed at a different height on your new

washer. The other three feet were preset at the factory. Properly

leveling your washer will minimize excessive noise and vibration.

1. Using a ⁹⁄₁₆" (14 mm) open-end wrench, verify that the nuts on

the three preset feet are tightened against the cabinet.

2. Slide the washer to its final location.

3. Push on the upper front panel to be sure that the washer is on

the rear feet. Lower the right front foot until it contacts the

floor. By hand, firmly rotate the foot up to an additional

1¹⁄₂ turns.

4. Check the levelness of the washer by placing a level on the

top edge of the washer, first side to side, then front to back.

5. Rock washer gently front to back, side to side and diagonally

to make sure that all four feet are in firm contact with the floor.

6. After the washer is level, use a ⁹⁄₁₆" (14 mm) open-end wrench

to turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are

not tight against the washer cabinet, the washer may vibrate.

7. If the washer is not level, move the washer out slightly and

first prop the front with a wood block and adjust the feet as

necessary. Then prop the back and adjust feet as necessary.

Repeat this step until the washer is level.

CompleteInstallation

1. Check the electrical requirements. Be sure that you have the

correct electrical supply and the recommended grounding

method. See “Electrical Requirements.”

2. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Remove any protective film or tape remaining on the washer.

5. Set the optional decorative mat in place on top of the washer.

NOTE: Make sure the top of the washer and the bottom of

the mat are clean.

6. Dispose of/recycle all packaging materials.

7. Check that the water faucets are on.

8. Check for leaks around faucets and inlet hoses.

9. Plug into a grounded 3 prong outlet.

10. Read “Washer Use.”

11. To test and to clean your washer, measure ¹⁄₂ the detergent

manufacturer’s recommended amount of HE High Efficiency

detergent for a medium-size load. Pour the detergent into the

detergent dispenser. Select NORMAL/CASUAL, and then

select START. Allow the washer to complete one whole cycle.

FEATURES AND BENEFITS

Electronic Controls

Flexible electronic controls are easy to use whether you are a

beginner or an expert.

Detergent Advantage System Dispenser

The four compartments in the dispenser allow loading of all

laundry additives before the washer is started. The additives will

be dispensed into the wash at the optimal time for high

performance cleaning. Aimed bleach release is included in the

detergent advantage system. The detergent is added at the

beginning of the cycle and the bleach is added after the enzymes

have had a chance to do their cleaning. The fabric softener is

dispensed in the rinse cycle. The Detergent Advantage System

Dispenser tray is easily removed for cleaning.

Auto Water Level

Adjusting to the size of the load, this feature allows the washer to

use the minimal amount of water needed to clean and rinse the

clothes. Because only the required amount of water is used, the

washer saves energy, too.

Larger Load Size

Since there is no agitator, you can wash larger, bulkier items such

as an average size sleeping bag. You are also able to wash more

clothes at one time, which means fewer loads.

Suspension System

To reduce washer “walk” and “off-balance” conditions, your new

washer combines:

■ 2 Springs to isolate vibration

■ 4 Shock absorbers at the washer base to minimize movement

Stainless Steel Drum

The Stainless Steel drum eliminates corrosion and enables higher

spin speeds for more water extraction, reducing drying time.

Adaptive Variable Speed Motor

The motor adapts to the load size and to the cycle selected to

give the optimum cleaning, rinsing, and spinning conditions. The

motor can handle slow speeds needed for wool and delicate

items, but it is powerful enough to handle a large clothes load.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with

fewer, larger loads, conserves resources and lowers your water

and energy bills too.

Spin Speeds

This washer automatically selects the spin speed based on the

cycle selected. This factory setting can be changed, however.

This washer offers up to six different spin speed choices.

Thermal Optimizer

The heating system ensures that the wash water is heated to the

preset temperature for Heavy Duty, White/Cotton, Sanitary, and

the Soil Treat option. It also provides “stepped cleaning” when

using the Sanitary cycle or the Soil Treat option. “Stepped

cleaning” starts the wash cycle with warm water to remove stains

(such as blood or grass). The water continues heating in order to

remove stains such as dirty mechanical oil.

Add A Garment

When lighted, Rapid Wash, Normal/Casual, Heavy Duty, White/

Cotton, and Sanitary can be paused and the door unlocked so

you can add a garment that may have been forgotten when

loading the washer. The ADD A GARMENT status message is

displayed for up to the first 8 minutes of a cycle and then the

LOCKED message will be displayed.

Direct Detergent Injection

A concentrated detergent solution is sprayed onto the clothes at

the beginning of the cycle to ensure that the detergent comes

into contact with the clothes as quickly as possible, removing

stains from your clothes without pretreating.

Dynamic Off-Balance Detection

This washer uses two sensors to detect load size and the amount

of off-balance within the load. The suspension system and

controls are specially designed to redistribute the load

automatically.

WASHER USE

StartingYourWasher

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

The following is a guide to using your washer. Please refer to

specific sections of this manual for more detailed information.

Do not store laundry products on the top surface of this washer.

Vibration is normal during operation.

UsingtheProperDetergent

Use only High Efficiency detergents. The package for this type of

detergent will be marked “HE” or “High Efficiency.” This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer's instructions to determine the amount of detergent

to use.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during

the final installation step, choose the Normal/Casual cycle and

run it without clothes. Use only HE High Efficiency detergent. Use

¹⁄₂ the manufacturer’s recommended amount for a medium-sized

load. This initial cycle serves to ensure the interior is clean before

washing clothes.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death,explosion,or fire.

WARNING

Use only HE High Efficiency detergent.

For All Wash Cycles

1. To load washer

Open the washer door by pulling on the handle. Sort laundry

according to color and type of fabric. Place a load of sorted

clothes in the washer. Do not overload washer. Overloading

can cause poor cleaning.

■ The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

■ Mix large and small items. Avoid washing a single item.

Load evenly.

■ Wash small items, such as infant socks, in mesh garment

bags. It is recommended that more than one garment bag

be used, and that each garment bag be filled with equal

amounts of material.

■ When unloading garments, occasionally check under the

rubber rim at the front of the tub for small items.

2. Close the washer door by pushing it firmly until the lock

clicks. The washer door will remain locked during the wash

cycle.

NOTE: After any wash cycle is completed, the door must be

opened and then closed before a new cycle can begin. The

door can be opened only if PAUSE/CANCEL is selected while

ADD A GARMENT shows in the status display or if the cycle

has been canceled. See “To cancel a cycle” in “Changing,

Cycles, Options and Modifiers” section.

3. Open the Dispenser Drawer and add laundry products to the

detergent, bleach, or fabric softener compartments. Close

drawer slowly to avoid spills. See “Using the Dispenser.”

4. Turn on the washer by selecting one of the WASH CYCLES.

The indicator light for the selected cycle will illuminate. When

selecting a Wash Cycle, the preset options, Soil Level, Temp,

Spin Speed for the selected cycle will illuminate. The display

shows the estimated time remaining. The preset settings

provide the recommended fabric care for the selected cycle.

See “Cycles.”

5. Select the desired Options. Not all Options are available with

all cycles. See “Options.”

6. Select the desired Modifiers (Soil Level, Temp, and Spin

Speed). Not all Modifiers are available with all Cycles and

Options. See “Modifiers.”

7. If desired, select the CYCLE END TONE. The signal is helpful

when you are washing items that should be removed from the

washer as soon as it stops.

8. To begin the wash cycle immediately

Select START (for approximately 1 second).

■ If you do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off.

■ When the wash cycle is complete, the CLOTHES CLEAN

status message is displayed, the door unlocks, and the

wash load can be removed from the washer. The washer

powers down automatically 5 minutes after the cycle is

complete and the CLOTHES CLEAN display goes off. To

power down the washer manually after the wash cycle is

complete, select PAUSE/CANCEL once.

9. To begin the wash cycle later

Select HOURS DELAY until the desired delay time (in hours)

shows in the Estimated Time Remaining display. Select

START. The countdown to the wash cycle will show in the

Status display.

UsingtheDispenser

Your new washer has a dispenser drawer with four separate

compartments for your laundry products—two are for detergent,

one is for liquid chlorine bleach, and one is for liquid fabric

softener. Laundry products are diluted and dispensed

automatically at the proper time during the wash cycle, making it

unnecessary for you to return to the washer during the cycle to

add them.

It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Do not put laundry additives directly into the wash tub, for

example detergent boosters. Always use the proper dispensers

when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of

detergent will be marked “HE” or “High Efficiency.” This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer's instructions to determine the amount of detergent

to use.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid

a spill).

Use only HE High Efficiency detergent.

Dispenser

A. Prewash detergent compartment

B. Separator

C. Main Wash detergent compartment

D. Dispenser release lever

E. Chlorine bleach compartment

F. Fabric softener compartment

Prewash detergent compartment

(Letter A in Dispenser Illustration)

Add detergent to this compartment when using the Pre Wash

option. Liquid or powdered detergent may be used in this

compartment. The detergent will automatically be dispensed

during Pre Wash if the Pre Wash option is selected.

■ Using High Efficiency (HE) detergent, add ¹⁄₃ the

recommended amount to the Prewash compartment and

²⁄₃ the recommended amount to the Main Wash

compartment.

■ Do not fill beyond the “MAX” level.

Main Wash detergent compartment

(Letter C in Dispenser Illustration)

Add liquid or powdered detergent to this compartment for your

main wash cycle. The detergent separator must always be in

place, either in the front or back position.

IMPORTANT: If you are using the Pre Wash, or Delay option,

powdered detergent must be used in the main wash

compartment since liquid detergents may seep out of the main

wash compartment during the prewash, or delay before the main

wash begins.

■ Do not fill beyond the “MAX” level.

■ Liquid or powdered color-safe bleach may be added to the

Main Wash compartment along with the same type of

detergent, liquid or powdered.

■ Liquid detergent: Put the SEPARATOR in the front position,

between the guides, as shown. There will be no gap between

the bottom of the wash cycle detergent compartment and the

bottom of the separator.

■ Powdered detergent: Put the SEPARATOR in the back

position, behind the guides, as shown. There will be a gap

between the bottom of the wash cycle detergent

compartment and the bottom of the separator.

NOTE: The separator will be in the POWDER (back) position

when shipped from the factory.

Chlorine bleach compartment

(Letter E in Dispenser Illustration)

Add no more than ¹⁄₃ cup (80 mL) liquid chlorine bleach to this

compartment. The bleach will be automatically diluted and

dispensed at the optimum time during the first rinse after the

wash cycle. This compartment cannot dilute powdered bleach.

■ Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

■ Do not fill beyond the “MAX” level.

NOTE: Overfilling could cause garment damage.

Fabric Softener compartment

(Letter F in Dispenser Illustration)

Add no more than ¼ cup (60 mL) liquid fabric softener to this

compartment. Fabric softener will be automatically dispensed in

the final rinse.

■ Do not fill beyond the “MAX” level.

Separator in front position, between guides

A. Separator

B. Guide

LIQUI

Separator in back position, behind guides

A. Separator

B. Guide

LIQUI

PausingorRestarting

1. To pause the washer at any time, select PAUSE/CANCEL.

2. To continue the cycle, select and hold START (for

approximately 1 second).

ChangingCycles,OptionsandModifiers

You can change the Cycle before START is selected. You can

change the factory default settings for the Modifiers (Soil Level,

Temp, and Spin Speed) and Options anytime before START is

selected and during the wash cycle.

NOTE: To help protect your garments, not all Options and

Modifiers can be selected with all wash cycles.

Cycles, Options and Modifiers can be changed anytime before

START is selected.

To cancel a cycle and select a new cycle

1. Select PAUSE/CANCEL twice.

2. Select desired cycle.

3. Select the desired Options.

4. Select and hold START (for approximately 1 second) to restart

the washer at the beginning of the new cycle.

To cancel a cycle

1. Select PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can

be removed.

NOTE: If the water level or the temperature is too high, the

washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has

started

1. Select PAUSE/CANCEL.

2. Select the desired Options or Modifiers.

3. Select and hold START (for approximately 1 second) to

continue the cycle.

NOTE: Options and Modifiers can be changed anytime after

START is selected and before the start of the selected Option or

Modifier.

To drain the washer manually

1. Select PAUSE/CANCEL.

2. Select DRAIN/SPIN.

3. Select and hold START (for approximately 1 second) to begin

the drain.

4. When the spin is complete, the door unlocks. Items can be

removed from the washer.

StatusDisplay

Messages on the status display help you to follow the progress of

your washer. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

Adding items

You can add items to the washer after the cycle has started for

Rapid Wash, Normal/Casual, Heavy Duty, White/Cotton, and

Sanitary if ADD A GARMENT message is displayed.

To add items

1. Select PAUSE/CANCEL. The washer door unlocks, and items

can be added.

2. To continue the cycle, close the door and select and hold

START (for approximately 1 second).

Cycle Complete

The CLOTHES CLEAN status message is displayed for 5 minutes

after the cycle is complete. The washer will then power down.

Locking controls

The Control Lock avoids unintended use of the washer. You can

also use the control lock feature to avoid unintended cycle or

option changes during a cycle. When the locked icon appears in

the display, all buttons are disabled except for Pause/Cancel and

Start. You can lock the controls while the washer is operating.

To lock the controls

Select and hold DRAIN/SPIN for 3 seconds.

The CONTROL LOCK icon illuminates.

To unlock the controls

Select and hold DRAIN/SPIN for 3 seconds until the CONTROL

LOCKED icon disappears.

Estimated Time Remaining

The cycle times vary automatically based on your water pressure,

water temperature, detergent, and clothes load. The cycle time

will be extended if oversudsing occurs or the load is unbalanced.

Cycles

Wash Cycles

Wash Cycles can be selected by pressing the button next to the

desired wash cycle. Each cycle is designed for different types of

fabric and soil levels.

■ Each cycle has a preset Soil Level (cycle time), Water

Temperature, Spin Speed and may have preset Options. The

preset settings provide the recommended fabric care for the

selected cycle.

■ The preset settings can be changed anytime before START is

selected. Not all Options and Modifiers are available with all

Cycles. (To change settings after the cycle has started, select

PAUSE/CANCEL, then select the desired settings. Select

START [for approximately 1 second] to continue the cycle.)

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water

Temperature, and Spin Speed. The preset settings provide the

recommended fabric care for the selected cycle. See chart.

*The cycle times vary automatically based on your water

pressure, water temperature, detergent, and clothes load. The

cycle time will be extended if oversudsing occurs or the load is

unbalanced.

Sanitary

Use this cycle to clean heavily soiled colorfast fabrics. This cycle

combines a very hot water temperature and fast-speed tumbling

to help ensure the removal of heavy soils and stains. It is

recommended that you set your hot water heater to 120ºF (49ºC)

to ensure proper performance during this cycle. Extra high speed

spin helps shorten drying time.

White/Cotton

This cycle is especially designed for cleaning loads of soiled

white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse

provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer

wash time, and extra high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and

normal to heavily soiled garments. This cycle combines

fast-speed tumbling, longer wash time, and extra high-speed

spin to shorten drying times. If the water temperature is lower

than needed for this cycle, the heater will warm the water to the

optimum temperature.

NOTE: Soil Treat is a default option for this cycle. To ensure best

performance, the water is heated as the cycle progresses. This

gradual heating assists in the removal of organic soils such as

blood.

Oversized Items

Use this cycle to wash large items such as blankets and

comforters. This cycle starts with a soak to thoroughly saturate

your large load. This is followed by medium wash action and

extra low spin speeds to maintain load balance.

Cycle

Estimated

Time*

(hr:min)

Soil

Level

Wash/

Rinse

Te mp

Spin

Speed

Sanitary (2:00) Normal Extra Hot/

Cold

Extra

High

White/ Cotton (1:10) Heavy Hot/

Cold

Extra

High

Heavy Duty (1:30) Heavy Hot/

Cold

Extra

High

Oversized

Items

(0:55) Normal Warm/

Cold

Extra

Low

Normal/

Casual

(0:45) Medium Warm/

Cold

High

Rapid

Wash

(0:35) Light Warm/

Cold

Extra

High

Delicate/Silk (0:35) Normal Cold/

Cold

No Spin

Wool/Hand

Wash

(0:35) Normal Cold/

Cold

Extra

Low

Normal/Casual

Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press

blends, cottons and linens, and synthetic fabrics. This cycle

combines medium-speed tumbling, high-speed spin, and a load

cooling process to reduce wrinkling.

Rapid Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments

that are needed in a hurry. This cycle combines fast-speed

tumbling, a shortened wash time, and extra high speed spin to

shorten drying time.

Delicate/Silk

Use this cycle to clean washable silk and ultra delicate garments.

(Check label instructions to make sure that garment is washable.)

This cycle gently tumbles and drains without spinning to gently

clean garments and minimize wrinkling. Garments will contain a

higher amount of water at the end of this cycle, because there is

no spinning action.

■ Use mesh garment bags to wash undergarments such as

underwire bras, items with strings, and small items such as

socks.

Wool/Hand Wash

Use this cycle to clean washable woolen and special care

garments. (Check label instructions to make sure that the

garment is washable.) Similar to the way garments are hand

washed in a sink, the wash action of this cycle combines periods

of extra low tumbling speeds and soaking. Low spin speeds

minimize wrinkling.

■ Use mesh garment bags to wash undergarments such as

underwire bras, items with strings, and small items such as

socks.

Favorite

Favorite allows you to store a customized wash cycle for future

use.

To customize a wash Cycle:

1. Select a cycle.

2. Select the desired OPTIONS.

Select the desired MODIFIERS (Soil Level, Temp, and Spin Seed).

4. To save the cycle, press and hold FAVORITE (approximately

3 seconds) or until a beep sounds and the letters “SET” are

displayed on your machine.

5. Press START.

6. To reuse this cycle at another time, select FAVORITE and

press START.

Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle combines

fast-speed tumbling and extra high speed spin. If desired, you

can reduce the spin speed by selecting the speed you want from

the SPIN SPEED modifier.

Rinse/Spin is useful for

■ Loads that need rinsing only.

■ Adding fabric softener to a load using the fabric softener

dispenser.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your

wash load. The spin speed is preset to extra high. If desired, you

can reduce the spin speed by selecting the speed you want from

the SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and

woolens should be drained with no spin or low spin to avoid

fabric stress.

NormalSounds

As with any new product, you will hear sounds that you are not

accustomed to. You may hear various sounds when the door is

locked or unlocked, and during the washing, rinsing, or spinning

process. Between changes in wash actions, there will be

momentary pauses. You will hear water spraying and splashing

during the wash and rinse cycles. These new sounds and pauses

are part of normal washer operation. See “Troubleshooting.”

Options

You can customize your wash by adding Options to your cycle

selections. You can add or change an option after starting a cycle

anytime before the selected option begins. Not all Options are

available with all cycles.

■ See the “Laundry Guide” section for an overview of possible

options for each Cycle selection.

■ You can select more than one option for a cycle. Some

options cannot be added to some cycles, for example, Soil

Treat cannot be added to the Rapid Wash cycle.

■ If an option is available with a selected cycle, the light for that

option will illuminate when selected.

■ If an option is unavailable with a selected cycle, there will be a

short tone and the light for that option will not illuminate when

selected.

Prewash

Use this option for loads of heavily soiled items that need

pretreatment. This option adds a 15 minute prewash and drain to

the main wash cycle.

■ Add detergent to the Prewash and Main Wash compartments

of the Dispenser Drawer.

■ When using Prewash, do not use liquid detergent in the Main

Wash compartment. Use powdered detergent for the main

wash cycle (see “Using the Dispenser”).

Options

Soil Treat

Use this option for heavily soiled loads that need improved soil

treatment. When Soil Treat is selected, the water temperature of

the selected wash cycle is automatically set to Hot/Cold. The

water will then be gradually heated to a hot water temperature to

aid in stain removal. This option will provide optimal removal of

organic stains such as blood.

NOTE: If Soil Treat is selected with the Sanitary cycle, the water

will be heated to an extra hot temperature.

Energy Saver

The Energy Saver option allows you to increase your energy

savings on the higher temperature cycles (White/Cotton and

Heavy Duty) while maintaining cleaning performance by

lengthening the wash time by only 10 minutes.

NOTE: For the best energy performance, use the Normal/Casual

Cycle.

Hours Delay

To begin the wash cycle later select Hours Delay until the desired

delay time (in hours) shows in the Estimated Time Remaining

display. Select START. The countdown to the wash cycle will

show in the display window.

■

When delaying a cycle, use only powdered detergents in the

main wash compartment since liquid detergents may seep out

of the compartment during Delay, before the wash cycle begins.

Extra Spin

Use this option to add an additional spin to any cycle.

Cycle End Tone

This signal is helpful when you are removing items from the

washer as soon as it stops.

Normal Rinse

Consists of a two phase rinsing process that is effective for

everyday laundry.

Extra Rinse

A second rinse can be used to ensure the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as the first rinse.

Extended Rinse

This option provides the best rinse level, to allow for even better

detergent removal.

Modifiers

Preset cycle settings of water Temperature, Wash/Rinse, and

Spin Speed can be changed. You can change a modifier after

starting a cycle anytime before the selected Modifier begins. Not

all Modifiers are available with all options and cycles.

■ To change cycle time, select the SOIL LEVEL button until the

desired setting illuminates.

■ To change the water temperature, select the TEMP button

until the desired setting illuminates.

■ To change the spin speed, select the SPIN SPEED button

until the desired setting illuminates.

Wash/Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest water safe for fabrics. Follow garment

label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses

increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses save energy.

Temperature Guide

*When used with Soil Treat option, the water is heated gradually

to assist in the removal of organic soils such as blood.

In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be difficult to remove.

Modifiers

Wash Water Temperature Suggested Fabrics

EXTRA HOT* Sturdy colorfast fabrics

Heavy soils

HOT* Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

Light soils

SENSORSURE

Automatic Temperature Control

SENSORSURE

automatic temperature control electronically

senses and maintains a uniform water temperature.

SENSORSURE

automatic temperature control regulates

incoming hot and cold water. The SENSORSURE

automatic

temperature control is automatically turned ON when a cycle is

selected. (See “Preset Cycle Settings” in “Cycles.”)

■ SENSORSURE

automatic temperature control works for the

wash temperature with Extra Hot/Cold, Hot/Cold, Warm/

Warm, Warm/Cold, and Cold/Cold settings.

■ SENSORSURE

automatic temperature control works for the

rinse temperature with the Warm/Warm setting.

LaundryGuide

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these

washer cycles.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Pre

Wash

Soil

Treat

Energy

Saver

Hours

Delay

Extra

Spin

Extend

Rinse

Extra

Rinse

Sanitary Heavily soiled underwear, towels, work

clothes, diapers, etc.

✔✔ ✔✔✔✔

White/

Cotton

Heavily soiled whites made of cotton or

cotton blends

✔✔✔✔✔✔✔

Heavy Duty Moderately soiled work clothes,

underwear, towels, and denims, made of

sturdy fabrics

✔✔✔✔✔✔✔

Oversized

Items

Normally soiled blankets, comforters,

pillows, bulky jackets, etc

✔✔✔

Normal/

Casual

Lightly to normally soiled blouses, shirts,

pants, polos, made of cotton, polyester,

linen, and cotton blends

✔✔ ✔✔✔✔

Rapid Wash Lightly soiled casual wear or sportswear

made of cotton, polyester, nylon or cotton

blends

✔✔✔✔

Delicate/Silk Machine washable silks and delicates

such as dresses, blouses, skirts, slacks

and curtains

✔✔✔

Wool/Hand

Wash

Machine washable woolens and machine

washable special care items such as

sweaters, knits and dresses

✔✔

Rinse/Spin All load types ✔✔✔✔

Drain/Spin All load types ✔✔

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of

your garments.

■ Use only High Efficiency detergents. The package for this type

of detergent will be marked “HE” or “High Efficiency.” This

wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular

detergent will likely result in washer errors, longer cycle times

and reduced rinsing performance. It may also result in

component failures and noticeable mold or mildew. HE

detergents are made to produce the right amount of suds for

the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use.

■ Close zippers, snaps, and hooks to avoid snagging other

items. Remove pins, buckles, and other hard objects to avoid

scratching the washer interior. Remove non-washable trim

and ornaments.

■ Empty pockets and turn them inside-out.

■ Turn down cuffs; brush away lint and dirt.

■ Turn synthetic knits inside-out to avoid pilling.

■ Tie strings and sashes so they will not tangle.

■ Mend tears, loose hems, and seams.

■ Treat spots and stains.

■ Stained or wet garments should be washed promptly for best

results.

■ Mix large and small items, avoid washing single items, and

load evenly.

■ Wash small items, such as infant socks, in a mesh garment

bags. To create a balanced load it is recommended that more

than one garment bag be used, and that each garment bag

be filled with equal amounts of material.

NOTE: If you are washing only small items, it is

recommended that more than one mesh garment bag be

used, and that each garment bag be filled with equal

amounts of material.

Sorting

■ Separate heavily soiled items from lightly soiled ones, even if

they would normally be washed together. Separate lint-givers

(towels, chenille) from lint-takers (corduroy, synthetics,

permanent press). When possible, turn lint-givers inside-out.

■ Separate dark colors from light colors, colorfast items from

noncolorfast items.

■ Sort by fabric and construction (sturdy cottons, knits, delicate

items).

Unloading

■ Remove clothes from washer after the cycle is completed.

Metal objects such as zippers, snaps, and buckles may rust if

left in the washer basket for a long time.

■ When unloading garments, occasionally check under the

rubber rim at the front of the tub for small items.

Use only HE High Efficiency detergent.

Loading suggestions (maximum size loads).

Heavy Work Clothes

4jeans

4workpants

4workshirts

2 sweatpants

2 sweatshirts

Towels

10 bath towels

10 hand towels

14 washcloths

Mixed Load

3 sheets (1 king, 2 twin)

4 pillowcases

3shirts

3blouses

9T-shirts

9shorts

10 handkerchiefs

Rapid Wash cycle

2dress shirts 1pair dress pants

WASHER CARE

CleaningYourWasher

Cleaning the door seal

1. Open the washer door and remove any clothing or items from

the washer.

2. Inspect the gray colored seal between the door opening and

the basket for stained areas. Pull back the seal to inspect

areas under the seal.

3. If stained areas are found, wipe down these areas of the seal,

using the procedure that follows.

a) Mix a dilute solution, using ³₄ cup (177.4 mL) of liquid

chlorine bleach, and 1 gal. (3.8 L) of warm tap water.

b) Wipe the seal area with the dilute solution, using a damp

cloth.

c) Let stand 5 minutes.

d) Wipe down area thoroughly with a dry cloth and let the

washer interior air dry.

IMPORTANT:

■ Wear rubber gloves when cleaning for prolonged periods.

■

Refer to the bleach manufacturer’s instructions for proper use.

Washer Monthly Maintenance Procedure

Your washer has a special cycle stored within the machine’s

programming. Pressing a specific combination of buttons will

enter this cleaning cycle. This cycle uses higher water volumes in

combination with liquid chlorine bleach to thoroughly clean the

inside of your washing machine.

NOTES:

■ Read these instructions completely before beginning the

cleaning process.

■ If necessary, the cleaning cycle may be interrupted by

pressing the PAUSE/CANCEL button. However, this will not

immediately stop the cycle. The machine will display “int”

(interrupt) and continue with several rinse and drain steps to

ensure that all remaining bleach is rinsed from the washer.

Begin procedure

1. Open the washer door and remove any clothing or items from

the washer.

2. Be sure the door is closed.

3. Open the dispenser drawer and remove the detergent divider

from the Main Wash detergent compartment. See “Using the

Dispenser” for instructions. No laundry products will be

added at this time; you will be required to add only liquid

chlorine bleach, at a later step.

4. Be sure the dispenser drawer is closed.

5. To enter the cycle, a specific combination of buttons must be

pressed.

■ Select the RINSE/SPIN button.

■ Select LOW Spin Speed.

■ Select WARM/COLD Water Temperature.

■ Select the EXTRA RINSE, Rinse Option.

■ Push the CYCLE END TONE button 4 times within

5 seconds to start the cycle. The door will lock, and filling

will begin.

NOTE: The water in the washer will dispense for a

moment, then the door will unlock, lock again, and then

the cycle will continue.

■ The machine will fill and run a short sensing cycle. This

will take approximately 3 minutes.

6. The washer will provide 4 short tones. Check the Estimated

Time Remaining display for the codes indicated below.

7. Add liquid chlorine bleach.

A. Seal

a) If the washer displays the letters “Ab” (Add Bleach) in the

Estimated Time Remaining display, you will hear 4 short

tones. Proceed to Step 6.

b) If the washer displays the letters “rL” (Remove Load) in

the Estimated Time Remaining display, an error tone will

sound. The door will unlock.

■ Open the door and remove the items from the washer.

■ Continue the cycle by pressing the START button.

NOTE: The water in the washer will dispense for a

moment, then the door will unlock, lock again, and

then the cycle will continue with another check for

items in the washer.

■ The machine will fill and run a short cycle to

determine whether any items have been left in the

washer. This will take approximately 3 minutes.

■ The washer will repeat Step 5 until it can determine

that there are no items in the washer and will display

“Ab” (Add Bleach).

a) If using the maintenance procedure for the first time, open

the dispenser drawer and immediately add 1 cup

(236.6 mL) liquid chlorine bleach to the Main Wash

detergent compartment. The liquid chlorine bleach should

immediately flow out of the dispenser.

b) For subsequent monthly maintenance procedures, open

the dispenser drawer and immediately add ¹⁄₃ cup

(78.8 mL) liquid chlorine bleach to the Main Wash

detergent compartment. The liquid chlorine bleach should

immediately flow out of the dispenser.

NOTES:

■ Water will be flowing into the dispenser drawer when

the bleach is added. This is normal.

■ Do not add any detergent to this cleaning cycle. Use

of more than 1 cup (236.6 mL) of bleach will cause

product damage over time.

La page charge ...

KitchenAid Front-Loading Automatic Dishwasher Manuel utilisateur

Marque: KitchenAid

Modèle: Front-Loading Automatic Dishwasher

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

Washer/Dryer Front-Loading Automatic Dishwasher

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid Front-Loading Automatic Dishwasher User manual

KitchenAid Front-Loading Automatic Dishwasher Manuel utilisateur

Ce manuel convient également à

KitchenAid Front-Loading Automatic Dishwasher Manuel utilisateur

dans d''autres langues

Autres documents