Whirlpool WFW9500TC00 Le manuel du propriétaire

Marque: Whirlpool

Modèle: WFW9500TC00

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

vapeur

FRONT.LOADING

AUTOMATICWASHER

s_ _ (!_r____t_;_

For questions about features, operation/performance,

parts, accessories or service call: 1-800-253-1301

In Canada, call: 1-800-807-6777

or visit our website at www.whirlpool.com or www.whirlpool.ca

LAVEUSE

AUTOMATIQUEA

CHARGEMENTFRONTAL

Au Canada, pour assistance, installation ou service, composez le :

1-800-807-6777

ou visitez notre site intemet h www.whirlpool.ca

Table of Contents/Table des matieres .................. 2

Para obtener acceso al manual de uso y cuidado en espaSol, o

para obtener informaci6n adicional acerca de su producto, visite:

www.whirlpool.com.

Tenga listo su ndmero de modelo cempleto. Podrh encentrar el

ndmero de modelo y de serie en la etiqueta ubicada debajo de la

tapa de la lavadora.

Certified to Sanitize

Certifie pour aseptiser

Designed to use only HE High Efficiency Detergent

Con£ue pour I'utilisation d'un detergent haute efficacite seulement

461970240781 / W10158196A

TABLEOFCONTENTS

WASHER SAFETY ......................................................................... 3

INSTALLATION REQUIREMENTS ................................................ 4

Tools and Parts ............................................................................ 4

Options ......................................................................................... 4

Location Requirements ................................................................ 5

Drain System ................................................................................ 6

Electrical Requirements ............................................................... 7

INSTALLATION INSTRUCTIONS .................................................. 7

Remove Transport System .......................................................... 7

Connect the Inlet Hoses ............................................................... 8

Route the Drain Hose ................................................................... 8

Secure the Drain Hose ................................................................. 9

Level the Washer .......................................................................... 9

Complete Installation ................................................................... 9

FEATURES AND BENEFITS ........................................................ 10

WASHER USE ............................................................................... 11

Starting Your Washer ................................................................. 11

Using the Proper Detergent ....................................................... 11

Using the Dispenser ................................................................... 12

Pausing or Restarting ................................................................. 13

Changing Cycles, Options and Modifiers .................................. 13

Status Lights .............................................................................. 13

Cycles ......................................................................................... 14

Normal Washer Sounds ............................................................. 16

Options ....................................................................................... 16

Modifiers ..................................................................................... 16

Laundry Guide ............................................................................ 17

LAUNDRY TIPS ............................................................................ 18

Loading ....................................................................................... 18

WASHER CARE ............................................................................ 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ....................................................................... 20

Vacation, Storage, and Moving Care ......................................... 20

TROUBLESHOOTING .................................................................. 21

ASSISTANCE OR SERVICE ......................................................... 24

In the U.S.A ................................................................................ 24

In Canada ................................................................................... 24

Accessories ................................................................................ 24

WARRANTY .................................................................................. 25

TABLEDESMATIERES

SI:!:CURITE DE LA LAVEUSE ........................................................ 26

EXIGENCES D'INSTALLATION ................................................... 27

Outillage et pieces ...................................................................... 27

Options ....................................................................................... 27

Exigences d'emplacement ......................................................... 28

Syst_me de vidange ................................................................... 29

Specifications electriques .......................................................... 30

INSTRUCTIONS D'INSTALLATION ............................................. 31

Elimination des accessoires de transport .................................. 31

Raccordement des tuyaux d'alimentation ................................. 31

Acheminement du tuyau de vidange ......................................... 32

Immobilisation du tuyau de vidange .......................................... 32

Reglage de I'aplomb de la laveuse ............................................ 33

Achever I'installation .................................................................. 33

CARACTI:!:RISTIQUES ET AVANTAGES ..................................... 34

UTILISATION DE LA LAVEUSE ................................................... 35

Mise en marche de la laveuse .................................................... 35

Utilisation du detergent approprie ............................................. 35

Utilisation du distributeur ........................................................... 36

Pause ou remise en marche ....................................................... 38

Changement des programmes, options et modificateurs .........38

Temoins lumineux ...................................................................... 38

Programmes ............................................................................... 39

Sons normaux _mis par la laveuse ............................................ 41

Options ....................................................................................... 41

Modificateurs .............................................................................. 42

Guide de lessivage ..................................................................... 43

CONSEILS DE LESSIVAGE .......................................................... 44

Chargement ................................................................................ 44

ENTRETIEN DE LA LAVEUSE ..................................................... 45

Nettoyage de la laveuse ............................................................. 45

Tuyaux d'arrivee d'eau ............................................................... 46

Precautions h prendre avant les vacances,

un entreposage ou un demenagement ...................................... 46

DI:!:PANNAGE................................................................................. 47

ASSISTANCE OU SERVICE ......................................................... 50

Aux letats-Unis ............................................................................ 50

Au Canada .................................................................................. 50

Accessoires ................................................................................ 50

GARANTIE ..................................................................................... 51

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. Ifthe hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[] Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

[] Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESE INSTRUCTIONS

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation.

The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 19/16"[39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrenches 17 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape

Parts supplied:

A.Drain hoseform

B.Inlet hose (2)

C.Inlet hose washer (4)

D. Transportbolt hole plug (4)

E.Beadedstrap

Alternate Parts

Your installation may require additional parts. Ifyou are interested

in purchasing one of the items listed here, call the toll-free

number on the cover or in the "Assistance or Service" section.

If You Have You Will Need to Buy

Laundry tub or Sump pump system (if not already

standpipe taller available)

than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm) tall

drain tub or utility sink and sump pump

(available from local plumbing suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose

Part Number 8318155; and connector kit,

Part Number 285835

Drain hose too 4 ft (1.2 m) drain hose extension kit,

short Part Number 285863

Water faucets 2 longer water fill hoses:

beyond reach of fill 6 ft (1.8 m) Part Number 76314,

hoses 10 ft (3.0 m) Part Number 350008

Pedestal

You have the option of purchasing pedestals of different heights

separately for this washer. You may select a 10" (25.4 cm) or a

15.5" (39.4 cm) pedestal. These pedestals will add to the total

height of the washer for a total height of approximately

48" (121.9 cm) or 53.5" (135.9 cm), respectively.

A B

A. 10" (25.4 cm) pedestal

B. 15.5" (39.4 cm) pedestal

To order, call the dealer from whom you purchased your washer

or refer to the "Assistance or Service" section.

Pedestal Color Part Number

Height

10" (25.4 cm) White WHP1000SQ

15.5" (39.4 cm) White WHP1500SQ

15.5" (39.4 cm) Tuscan Chestnut WHP1500SC

Stack Kit

Are you planning to stack your washer and dryer? To do so you

will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or

refer to the "Assistance or Service" section. Ask for Part

Number 8541503.

Selectingtheproperlocationforyourwasherimproves

performanceandminimizesnoiseandpossiblewasher"walk."

Yourwashercanbeinstalledunderacustomcounter,orina

basement,laundryroom,closet,orrecessedarea.See"Drain

System."

Companionappliancelocationrequirementsshouldalsobe

considered.Properinstallationisyourresponsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the

washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of

where the power cord is attached to the back of the washer.

See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the

hot and cold water fill valves, and water pressure of

20-100 psi (137.9-689.6 kPa).

If you live in a hard water area, use of a water softener is

recommended to control the buildup of scale in the steamer

and other areas of the washer. Over time the buildup of lime

scale may clog the steamer, which will reduce steamer

efficiency and performance. Excessive buildup of scale may

lead to the need for steamer replacement or repair.

• A level floor with a maximum slope of 1" (2.5 cm) under entire

washer. Installing the washer on soft floor surfaces, such as

carpets or surfaces with foam backing, is not recommended.

• A sturdy and solid floor to support the washer with a total

weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C).

Some water can remain in the washer and can cause damage in

low temperatures.

Installation clearances

• The location must be large enough to allow the washer door

to be fully opened.

• Additional spacing should be considered for ease of

installation and servicing.

• Additional clearances might be required for wall, door, and

floor moldings.

• Additional spacing of 1" (2.5 cm) on all sides of the washer is

recommended to reduce noise transfer.

• Companion appliance spacing should also be considered.

Washer Dimensions

(129.5 cm)

Recommended installation spacing for custom

undercounter installation

Thedimensions shown arefor the recommended spacing.

Custom undercounter installation - Washer only

39" rain.

(99.9 crn)

(2.5 cm) (68.6 cm) (2.5 cm)

Recommended installation spacing for recessed or

closet installation, with or without a pedestal

Thedimensions shown arefor the recommended spacing.

Recessed area or closet installation

(7.6 crn}

48in.2'_ I_- _-

(310 cm2)

(155om2)

(7.0orn)

I1" 1_-31W'_1 4"1_-

(2.5cm) (80cm) (10.2crn)

A B

A. Side view - closet or confined area

B. Closet door with vents

*Min. top and bottom air openings for closet door.

Recessed or closet installation - Washer on pedestal

1"--_,-,_-- 27".---_,_---1" I1"1_- 81Y2"_14"

(2.5 cm) (68.6 crn) (2.6 cm) (2.5 cm) (80 cm) (10.2 crn}

A B

A. Recessed area

B. Side view - closet or confined area

311/2"

(80,0cm)

Recommended installation spacing for recessed or

closet installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 in. 2 *

(310crn2)

--2 NN-

24 in? *

(155cm2)

3"* (7.6 cm)

3"* (7.6 crn)

(ii( ((ii

* Required spacing

i .._iii'_'_,''i.I::i_/_ii'._

iJi_i!__i'_"_i"_i_i;_

5½"**--_-

{14¢rn)

76"

{193 crn)

1"-_ -,_- 27" -1_

2.5 crn 68.6 cm 2.5 crn

*Requiredspacing

**Forventingout the side, 1" (2.5cm) spacing is allowed.

Recommended installation spacing for cabinet

installation

openings in the top are required.

" • ) 7"(17,8crn)

The dimensions shown are for the recommended spacing.

For cabinet installation, with a door, the minimum ventilation

1" " "

(10.2 cm) (80,0 era) (2,5 cm) (2,5 cm) (68,6 cm) (2,5 cm)

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain

system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than

17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and

no higher than 96" (2.4 m) from the bottom of the washer.

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal, (76 L) capacity, The top

of the laundry tub must be at least 30" (76,2 cm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical

supply is required. A time-delay fuse or circuit breaker is

recommended. It is recommended that a separate circuit

serving only this appliance be provided.

This washer is equipped with a power supply cord having a

grounded 3 prong plug.

To minimize possible shock hazard, the cord must be

plugged into a mating, grounded 3 prong outlet, grounded in

accordance with local codes and ordinances. If a mating

outlet is not available, it is the personal responsibility and

obligation of the customer to have the properly grounded

outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is

recommended that a qualified electrician determine that the

ground path is adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not sure the

washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING iNSTRUCTiONS

For a grounded, cord=connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer

is within approximately 3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the

suspension system during transportation. These bolts also retain

the power cord inside the washer until the bolts are removed.

1. Using a 13 mm wrench, loosen each of the bolts.

2. Oncetheboltisloose,moveittothecenteroftheholeand

completelypulloutthebolt,includingtheplasticspacer

coveringthebolt.

8. Usingpliers,tightenthecouplingswithanadditional

two-thirdsturn.

3. Onceall4boltsareremoveddiscardboltandspacers.Then

pullthepowercordthroughtheopeningoftherearpaneland

closetheholewiththeattachedcap.

4. Closetheboltholeswiththe4transportboltholeplugs.

NOTE:Ifthewasheristobetransportedatalaterdate,callyour

localservicecenter.Toavoidsuspensionandstructuraldamage

toyourwasher,itmustbeproperlysetupforrelocationbya

certifiedtechnician.

__u_¸_.._d_,

Insertnewflatwashers(supplied)intoeachendoftheinlet

hoses.Firmlyseatthewashersinthecouplings.

A B

A. Coupling

B. Washer

2. Make sure the washer drum is empty.

3. Attach the hose with the red color indicator to the Hot (left)

inlet valve. Attaching the red coupling first makes it easier to

tighten connection with pliers. Screw on coupling by hand

until it is seated on the washer.

4. Attach the hose with the blue color indicator to the Cold

(right) water inlet valve. Screw on coupling by hand until it is

seated on the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement

dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,

wear, or leaks are found.

Proper routing of the drain hose protects your floors from damage

due to water leakage. Read and follow these instructions.

Remove drain hose from washer cabinet

Gently pull the corrugated drain hose from the shipping clips.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

H. Hot water inlet

C. Cold water inlet

Using pliers, check the tightness of the hose couplings

already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can

result.

6. Attach hot water hose to the hot water faucet. Screw on

coupling by hand until it is seated on the washer.

7. Attach cold water hose to the cold water faucet. Screw on

coupling by hand until it is seated on the washer.

A. Snap either end of the drain hose form to the drain hose at

the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess

drain hose into standpipe. Hose should be secure, but loose

enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and

Parts."

1. Drapethepowercordoverthewashertop.

2. Securethedrainhosetothelaundrytublegorstandpipewith

thebeadedstrapprovided.(SeeillustrationsAandB.)

1. Checktheelectricalrequirements.Besurethatyouhavethe

correctelectricalsupplyandtherecommendedgrounding

method.See"ElectricalRequirements."

2. Checkthatallpartsarenowinstalled.Ifthereisanextrapart,

gobackthroughthestepstoseewhichstepwasskipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

If the washer faucets and the drain standpipe are recessed

(see illustration C), put the hooked end of the drain hose in

the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and

vibration.

1. Check the levelness of the washer by placing a level on the

top edge of the washer, first side to side, then front to back.

If the washer is against a wall, move the washer out slightly

before tipping back. If the washer is not level, first prop the

front with a wood block and adjust the feet as necessary;

then prop the back and adjust feet as necessary. Repeat this

step until washer is level.

Make sure all four feet are stable and resting on the floor.

Then check that the washer is perfectly level (use a level).

After the washer is level, use a 17 mm open-end wrench to

turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. Ifthe nuts are

not tight against the washer cabinet, the washer may vibrate.

The washer should not move front to back, side to side, or

diagonally when pushed on its top edges.

Slide the washer to its final location.

Confirm the levelness of the washer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

Totest and to clean your washer, measure 1/2the detergent

manufacturer's recommended amount of HE High Efficiency

detergent for a medium-size load. Pour the detergent into the

detergent dispenser. Select NORMAL/CASUAL, and then

select START. Allow the washer to complete one whole cycle.

Use only HE High Efficiency detergent.

FEATURESANDBENEFITS

Electronic Controls

Flexible electronic controls are easy to use whether you are a

beginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This

washer provides a three-compartment dispenser which includes

separate compartments for High Efficiency "HE" detergent, fabric

softener, and liquid chlorine bleach. The dispenser can easily be

removed for cleaning. Laundry products are dispensed

automatically at the proper time during the wash cycle, making it

unnecessary for you to return to the washer during the cycle to

add them and ensuring that these cleaning products perform

their best.

Deep Clean with Steam

This washer has a built-in steaming unit which is combined with

the DEEP CLEAN option to provide multiple temperatures to help

remove a variety of stains from garments.

Clean Washer Cycle with Steam

This cycle uses steam to raise the temperature of the washer and

makes the washer self-cleaning, flushing the machine's interior

free of dirt and other residue. The use of AFFRESH TM washer

cleaner or liquid chlorine bleach with this cycle, will remove and

help avoid odor-causing residue.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning

and rinsing performance. Two sensors determine load size, load

composition, and suds level, then the sensors adjust the water

level to the proper setting. This eliminates guesswork. The water

level is just right for every wash load size.

Larger Load Size

Since there is no agitator, you can wash larger, bulkier items such

as a king-sized bedspread. You are also able to wash more

clothes at one time, which means fewer loads.

Stainless steel Drum

The stainless steel drum eliminates corrosion and enables higher

spin speeds for more water extraction, helping to reduce drying

time compared to traditional top-load washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with

fewer, larger loads. It also lowers your water and energy bills by

helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the

cycle selected. This factory setting can be changed, however.

This washer offers up to four different spin speed choices.

Heating Element

This washer has a heating element that automatically heats the

water to the optimal temperature on select cycles. This enables

stepped cleaning, a process in which warm water is brought in

and mixed with detergent first, then the water is heated. Stepped

cleaning starts the wash cycle with warm water to remove stains

(such as blood and grass).

6th Sense TM Technology

Intuitive intelligence "knows every load" determining load sizes,

water levels and how much cleaning time is needed.

sense"

Add A Garment

When this option is available at the beginning of the cycle, the

Add a garment Status Light will glow for the first 4-8 minutes.

This washer allows an 4-8 minute period in which other garments

may be added to a load.

Direct Injection Wash System

This washer channels 100% of the water through the dispensers

to assure thorough rinse-out and mixture of all the laundry

products before they touch any garments. The water is then

sprayed from the top front onto the center of the load, providing

even distribution and optimum cleaning performance. It is normal

for small amounts of water to remain in the dispensers when the

wash cycle is complete.

Efficient Detergent System with Anti-Escape Valve

This washer has a specially designed valve that closes during the

wash portion of the cycle so that 100% of the water and

detergent mixture is used on the load. The Efficient Detergent

System ensures that no water or detergent is wasted.

6-Point Suspension System

Shock absorbers, 2 springs and electronic controls are specially

designed to help redistribute the load automatically and minimize

movement of the wash drum during the spin cycle. The 6-Point

Suspension System reduces the amount of force transmitted to

the floor by the washer, resulting in reduced noise and vibration.

WASHERUSE

NORMAL

HrAN_ABLDEELKA

$_ART

ontlols Lock/t;nlock DoorLocked

__1°{°f3Se°ndg CLEANWASHER

Estimated Time RemahNng

DeepClean Extra Rinse

Delay Wash Clean

Washer

I_es_t

Hot _ Medium Heavy Loud

Warm Low _ Normal _ Soft

Cold NoSpin £ight Off

Remndel

®®®®

WaterTemp Spin Soil Cycme

All Col_ Speed Level Signal

Button

Sound

NOTE: The panel shown above may be different from that of your model.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

The following is a guide to using your washer. Please refer to

specific sections of this manual for more detailed information,

Do not store laundry products on the top surface of this washer.

Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type of

detergent will be marked "HE" or "High Efficiency." This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer's instructions to determine the amount of detergent

to use.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during

the final installation step, choose the Normal/Casual cycle and

run it without clothes. Use only HE High Efficiency detergent. Use

_/2the manufacturer's recommended amount for a medium-size

load. This initial cycle serves to ensure the interior is clean before

washing clothes.

For All Wash Cycles

Open the washer door by pulling on the handle. Sort laundry

according to color and type of fabric. Place a load of sorted

clothes in the washer. Do not overload washer. Overloading

can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

• Mix large and small items and avoid washing single items.

Load evenly.

• Wash small items, such as infant socks, in mesh garment

bags. It is recommended that more than one garment bag

be used, and that each garment bag be filled with equal

amounts of material.

• When unloading garments, check under the gray colored

seal at the front of the tub for small items.

Close the washer door by pushing it firmly until the lock

clicks. The washer door will remain locked during the wash

cycle.

NOTES:

• After any wash cycle is completed, the door must be

opened and then closed before a new cycle can begin.

• The door can be opened only if PAUSE/CANCEL is

selected while the Add A Garment light is glowing or if the

cycle has been canceled.

• See "To cancel a cycle" in "Changing, Cycles, Options

and Modifiers" section.

3. Open the dispenser drawer and add laundry products to the

detergent, bleach, or fabric softener compartments. Close

drawer slowly to avoid spills. See "Using the Dispenser."

Use only HE High Efficiency detergent.

4. Turn on the washer by selecting POWER. Select one of the 9.

cycles by turning the cycle selector. The indicator light for the

selected cycle will glow green. When you are selecting a

wash cycle, the preset options and modifiers (such as Water

Temp, Spin Speed, and Soil Level) for the selected cycle will

glow green. Selectable options will glow amber. If an option

or modifier is unavailable with a selected cycle, the light will

not illuminate. The display shows the estimated time

remaining. The preset settings provide the recommended

fabric care for the selected cycle. See "Cycles."

5. Select the desired Options. Not all options are available with 10.

all cycles. See "Options."

6. Select the desired modifiers such as Water Temp, Spin Speed 11.

and Soil Level. Not all modifiers are available with all cycles

and options. See "Modifiers."

7. If desired, select the CYCLE SIGNAL. The signal is helpful

when you are washing items that should be removed from the

washer as soon as it stops. Select Loud, Soft or Off.

8. If desired, select the BUTTON SOUND. This feature makes a

sound each time a button is pressed. Select Loud, Soft or Off.

Select and hold START for approximately I second.

• If you do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off.

• When the wash cycle is complete, the DONE status light

glows, the door unlocks, and the wash load can be

removed from the washer. The washer powers down

automatically 60 minutes after the cycle is complete and

the DONE light goes off. To power down the washer

manually after the wash cycle is complete, select PAUSE/

CANCEL once.

To use the same cycle again, press POWER first, then select

START.

To begin the wash cycle later

Select DELAY WASH until the desired delay time (in hours)

shows in the Estimated Time Remaining display. Select

START. The countdown to the wash cycle will show in the

display window.

IMPORTANT: When delaying a cycle, use only powdered

detergents in the High Efficiency "HE" detergent

compartment since liquid detergents may seep out of the

compartment during Delay Wash, before the wash cycle

begins.

Your new washer has a dispenser drawer with three separate

compartments for your laundry products--one is for high

efficiency detergent, one is for liquid chlorine bleach, and one is

for liquid fabric softener. Laundry products are diluted and

dispensed automatically at the proper time during the wash

cycle, making it unnecessary for you to return to the washer

during the cycle to add them.

It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Do not put laundry products directly into the wash tub. Always

use the proper dispensers when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of

detergent will be marked "HE" or "High Efficiency." This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer's instructions to determine the amount of detergent

to use.

Push in the dispenser drawer slowly and completely (to avoid

a spill).

Use only HE High Efficiency detergent.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

Dispenser

A. Dispenser release lever

B.Detergent type selector

C. High Efficiency "HE" detergent compartment

D. Chlorine bleach compartment

E.Fabric softener compartment

High Efficiency "HE" detergent compartment

(Letters B and C in Dispenser Illustration)

Add liquid or powdered HE detergent to this compartment for

your wash cycle. The detergent type selector (B) must always be

in the correct position for the detergent type used. Slide the

detergent type selector to the correct position.

IMPORTANT: If you are using the Delay Wash option, powdered

detergent should be used in the compartment since liquid detergents

may seep out of the compartment, before the wash begins.

Use the detergent manufacturer's recommended amount for

load size.

Liquid detergent:

A !l!

P°w_[t.,

Selector in position for liquid detergent

A. Detergent type selector

Powdered detergent:

Selector in position for powdered detergent

A.Detergent type selector

Chlorine bleach compartment

(Letter D in Dispenser Illustration)

Add no more than 2/3cup (160 mL) liquid chlorine bleach to this

compartment. The bleach will be automatically diluted and

dispensed at the best time during the first rinse after the wash

cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess. Follow the manufacturer's

directions for proper use.

• Do not fill beyond the "MAX" level.

NOTE: Overfilling could cause garment damage.

Fabric softener compartment

(Letter E in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener

dispenser, if desired.

• Do not overfill. The dispenser holds 1/4cup (60 mL) of fabric

softener.

The fabric softener is dispensed in the rinse cycle. If Extra

Rinse is selected, the fabric softener will be dispensed during

the Extra Rinse.

• Do not use fabric softener dispensing balls in this washer.

Dispensing balls will not operate correctly with this washer.

• Do not spill or drip any fabric softener onto the clothes.

• At the end of the cycle, a small amount of water may be left in

the dispenser. This is normal.

NOTE: Use only liquid fabric softener in this dispenser.

1. To pause the washer at any time, press PAUSE/CANCEL

2. To continue the cycle, press START (for approximately

1 second).

Not all Options and Modifiers are available with all cycles.

Available modifiers will glow amber. If an option or modifier is

unavailable with a selected cycle, the light will not illuminate.

Cycles, Options and Modifiers can be changed anytime before

START is selected.

To cancel a cycle and select a new cycle

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select desired cycle.

4. Select the desired Options or modifiers such as Water Temp,

Spin Speed and Soil Level.

5. Press START (for approximately 1 second) to restart the

washer at the beginning of the new cycle.

To cancel a cycle

1. Press PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can

be removed.

NOTE: If the water level or the temperature is too high, the

washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has

started

1. Press PAUSE/CANCEL once.

2. Select the desired Options or modifiers such as Water Temp,

Spin Speed and Soil Level. Available selections will glow

amber.

3. Press START (for approximately 1 second) to continue the

cycle.

To drain the washer manually

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select DRAIN/SPIN.

4. Press START (for approximately I second) to begin the drain.

5. When the spin is complete, the door unlocks. Items can be

removed from the washer.

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

Est(matedT(meRema(ning

Add a garment

This washer allows an 4-8 minute period in which other garments

may be added to the load. You can add items to the washer if the

Add a garment status light is glowing.

To add items when Add a garment light is glowing

1. Select PAUSE/CANCEL once. The washer door unlocks after

a few seconds, and items can be added.

2. To continue the cycle, close the door and select and hold

START (for approximately 1 second).

To add items when the Add a garment light is not glowing

1. You must cancel the current cycle by pressing PAUSE/

CANCEL twice. This will cancel the wash cycle and options.

The washer door unlocks, and items can be added.

2. Close the door, press POWER and select the new cycle and

options. Select and hold START (for approximately 1 second).

Done

The Done status light stays on for 60 minutes after the cycle is

complete, and then the washer shuts off.

Sanitized

This washer has a Sanitize water temperature, that is certified by

NSF International, an independent third-party testing and

certification organization. The certification verifies that the

sanitizing cycle reduces 99.9% of bacteria typically found on

clothing, bedding and towels, and there is no carryover of

bacteria between loads after the cycle is complete.

Certified to Sanitize

If the "Sanitize" wash temperature was selected, when the wash

cycle is complete, the DONE status light will illuminate, the door

unlocks, and the wash load can be removed from the washer.

The washer powers down automatically 60 minutes after the

cycle is complete and the DONE status light turns off.

Controls Lock/Unlock

The Controls Lock avoids unintended use of the washer. You can

also use the control lock feature to avoid unintended cycle or •

option changes during a cycle. When Controls Lock is lit, all

buttons are disabled except for Pause/Cancel and Start. You can

lock the controls while the washer is operating.

To lock the controls •

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds after

the cycle starts, or when the washer is turned off.

ControlsLock/Unlock

14014for3Se&Bnds

The status light next to the CONTROLS LOCK/UNLOCK button

will glow.

To unlock the controls

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until

the status light turns off.

NOTE: To lock or unlock the controls when the washer is off,

press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

Door Locked

When the status light glows, the door is locked.

Sensing/Revising Estimated Time

The cycle times vary automatically based on your water pressure,

water temperature, detergent, and clothes load.

The washer will automatically sense the progress inthe cycle and

adjust the Estimated Time Remaining display. While the washer is

sensing, the estimated time will flash and the Sensing status light

will glow. When the sensing is complete, the flashing stops, the

status light goes off and the Estimated Time Remaining display is

updated.

The cycle time will be extended if oversudsing occurs or the load

is unbalanced. The SUD routine removes extra suds and assures

proper rinsing of your garments. See "Troubleshooting." During

the unbalance routine the time displayed may pause until this

activity is complete, then resume with the remainder of the cycle.

Clean Washer Reminder

The Clean Washer Reminder light illuminates to remind you to

use the Clean Washer cycle regularly. The reminder light will

illuminate every 30 cycles. The reminder light may be reset by

either running the Clean Washer cycle, or by pressing the CLEAN

WASHER RESET button.

Cycles can be selected by turning the Cycle Control knob to the

desired cycle. Each cycle is designed for different types of fabric

and soil levels. The modifier indicator lights, on the right-hand

side of the panel, will change as cycles are selected.

NORMAL

CASUAL

DUTY

,</ WHITEST

) w, ,Es

/RINSE/SPIN

CLEANWASHER

Each cycle has a preset Soil Level (estimated cycle time),

Water Temperature and Spin Speed, and may have preset

options. The preset settings provide the recommended fabric

care for the selected cycle.

The preset settings will glow green to show the preselected

options and modifiers, and which may be changed anytime

before START is pressed. Not all options and modifiers are

available with all cycles. Available selections glow amber. (To

change settings after the cycle has started, press PAUSE/

CANCEL once, then select the desired settings. Press START

to continue the cycle.)

Powdered detergents may not dissolve well in a slow-speed

cycle. For best results, use liquid detergent in slow-speed

cycles.

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water

Temperature, and Spin Speed. The preset settings provide the

recommended fabric care for the selected cycle. See chart.

Cycle Soil Level Water Temp Spin Speed

(cycle time)

Whitest Normal Hot/Cold High

Whites (1:20)

Heavy Duty Normal Hot/Cold High

(1:10)

Bulky Items Normal Warm/Cold Low

(0:55)

Normal/ Normal Warm/Cold High

Casual (0:50)

Delicate Normal Warm/Cold Medium

(0:40)

Hand Normal Cold/Cold Low

Washables (0:30)

Clean N/A High

Washer

Soak Normal Warm/Cold No Spin

(0:30)

Rinse/Spin N/A Cold/Cold High

(0:22)

Drain/Spin N/A N/A High

(0:13)

To change the preset cycle settings

Press the selector of each available setting until the desired

setting glows green.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled

white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse

provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer

wash time, and High speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and

heavily soiled garments. This cycle combines fast-speed

tumbling, longer wash time, and High speed spin to shorten

drying times. If the water temperature is lower than needed for

this cycle, the heater will warm the water to the optimum

temperature.

Bulky Items

Use this cycle to wash large items such as blankets and

comforters. This cycle starts with a soak to saturate your large

load. This is followed by medium wash action and low-spin

speeds to maintain load balance.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics, such as sport

shirts, blouses, casual business clothes, permanent press

blends, cottons and linens, and synthetic fabrics. This cycle

combines medium-speed tumbling, high-speed spin, and a load

cooling process to reduce wrinkling.

NOTE: For the best energy performance, use the Normal/Casual

Cycle.

Delicate

Use this cycle to clean hand washable and special-care

garments. Similar to the way garments are hand washed in a

sink, the wash action of this cycle combines periods of low speed

tumbling and soaking. CRADLE CLEAN TM motion offers gentle

fabric care for effective cleaning of delicate and hand washable

garments. Medium speed spin helps reduce wrinkling.

• Use mesh garment bags to wash undergarments such as

underwire bras, items with strings, and small items such as

infant socks.

Hand Washables

Use this cycle to clean hand washable and special-care

garments. Similar to the way garments are hand washed in a

sink, the wash action of this cycle combines periods of low speed

tumbling and soaking. CRADLE CLEAN TM motion offers gentle

fabric care for effective cleaning of delicate and hand washable

garments. Low speed spin helps reduce wrinkling.

• Use mesh garment bags as necessary.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of

your washer fresh and clean. This cycle uses a higher water level.

Use with AFFRESH TM washer cleaner tablet or liquid chlorine

bleach to thoroughly clean the inside of your washing machine.

This cycle should not be interrupted. See "Cleaning Your Washer"

in the "Washer Care" section.

IMPORTANT: Do not place garments or other items in the washer

during the Clean Washer cycle. Use this cycle with an empty

wash drum.

Soak

Use the Soak cycle to help remove small spots of set-in stains on

fabrics. This cycle provides a soak time with warm or cold water

followed by drain. Extra water, a short tumbling phase for equal

distribution of the laundry, and a soaking time without drum

movement improve the removal of set-in stains. Drain without

spin assures gentle treatment, even for delicate articles.

Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle combines

fast-speed tumbling and High speed spin. If desired, you can

reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

A Rinse/Spin cycle is useful for

• Loads that need rinsing only.

• Adding fabric softener to a load.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your

wash load. The spin speed is preset to High. If desired, you can

reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, hand washables,

and woolens should be drained with no spin or low spin speed to

avoid fabric stress.

.... ....... <1 ......

As with any new product, you will hear sounds that you are not

accustomed to. You may hear various sounds when the door is

locked and unlocked, and during the washing, rinsing, and

spinning process. Between changes in wash actions, there will

be momentary pauses. You will hear water spraying and

splashing during the wash and rinse cycles. These new sounds

and pauses are part of normal washer operation.

You can customize your wash by adding options to your cycle

selections. You can add or change an option after starting a cycle

anytime before the selected option begins. Not all options are

available with all cycles. Available options will glow amber.

Current selections will glow green. If an option is unavailable with

a selected cycle, the light will not illuminate.

De[ay Wash

Clean

Washer

Reset

Reminder

DeepClean ExtraRinse

f Loud Loud

Soft I_ Soft

Off Off

Cycle Button

Signal Sound

See the "Laundry Guide" for an overview of possible options

for each Wash Cycle selection.

You can select more than one option for a cycle. Some

options cannot be added to some cycles. For example, Deep

Clean cannot be added to the Quick Wash cycle.

If an option is unavailable with a selected cycle, there will be

3 short tones, and the light for that option will not glow when

selected.

Delay Wash

To begin the wash cycle later, select DELAY WASH until the

desired delay time (in hours) shows in the Estimated Time

Remaining display, and then select START. The countdown to the

wash cycle will show in the display window, and the button •

indicator will blink until the cycle begins.

IMPORTANT: When delaying a cycle, use only powdered •

detergents in the high efficiency "HE" detergent compartment

since liquid detergents may seep out of the compartment during

Delay Wash, before the wash cycle begins.

Clean Washer Reminder

The Clean Washer Reminder light illuminates to remind you to

use the Clean Washer cycle regularly. The reminder light will

illuminate every 30 cycles. The reminder light may be reset by

either running the Clean Washer cycle, or by pressing the CLEAN

WASHER RESET button.

Deep Clean with Steam

Use this option for heavily soiled loads that need improved stain

treatment, loads with multiple types of stains, or loads you

suspect as having stains, but are afraid may have been missed

(no sorting or searching for stains). When Deep Clean with Steam

is selected, the water temperature of the selected wash cycle is

automatically set to warm. The water will then be slowly heated

to the temperature selected, along with steam, to aid in stain

removal. This option will provide optimal removal of organic

stains such as blood and grass.

Extra Rinse

An extra rinse can be used to aid in the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as the first rinse.

Cycle Signal

This signal is helpful when you are removing items from the

washer as soon as it stops. Press CYCLE SIGNAL to select Loud,

Soft or Off.

Button Sound

Button sounds are used to notify you of what has been selected

or to let you know when something is not available. Press

BUTTON SOUND to select Loud, Soft or Off.

Preset cycle settings of Water Temperature, Spin Speed, and Soil

Level can be changed. You can change a modifier after starting a

cycle anytime before the selected modifier begins. Not all

modifiers are available with all cycles and options. Available

options will glow amber. Current selections will glow green. If a

modifier is unavailable with a selected cycle, the light will not

illuminate.

NOTE: The panel shown below may be different from that of your

model.

Sanitize High

Hot 1_ Medium _ Heavy

Warm Low I_ Normal

Cold No Spin Light

WaterTemp Spin Soil

AllCold Speed Level

Rases

To change the water temperature, select the WATER TEMP

button until the desired setting glows green.

To change the spin speed, select the SPIN SPEED button

until the desired setting glows green.

To change cycle time, select SOIL LEVEL button until the

desired setting glows green.

Water Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses

increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses save energy.

• This washer has a Sanitize water temperature, that is certified

by NSF International, an independent third-party testing and

certification organization. The certification verifies that the

sanitizing cycle reduces 99.9% of bacteria typically found on

clothing, bedding and towels, and there is no carryover of

bacteria between loads after the cycle is complete.

Certified to Sanitize

The Sanitize temperature provides an extra high temperature

to remove 99.9% of certain bacteria. It is recommended that

you set your hot water heater to 120°F (49°C) to ensure

proper performance during this cycle.

The Sanitize Water Temp uses high water temperatures.

Please check garment care label to avoid garment damage.

In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be difficult to

remove.

6TH SENSE TM Technology

The 6TH SENSE TM Technology control electronically senses and

maintains a uniform water temperature. 6TH SENSF M

Technology control regulates incoming hot and cold water. 6TH

SENSE TM Technology control is automatically turned on when a

cycle is selected. See "Preset Cycle Settings" in "Cycles." 6TH

SENSE TM Technology control ensures consistent cleaning.

• 6TH SENSF MTechnology control works for all wash

temperature settings.

6TH SENSF MTechnology works for the rinse temperature

where the wash temperature setting is marked with an

asterisk, such as Warm*. All other rinse temperatures are

cold.

sense"

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these

washer cycles.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Delay Wash Deep Clean Extra Rinse

Whitest Whites Soiled white fabrics v' v' v'

Heavy Duty Sturdy, colorfast fabrics and heavily soiled garments v' v' v'

Bulky Items Normally soiled blankets and comforters v' v' v'

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of polyester, v' v' v'

nylon, cotton, linen, or cotton blends

Delicate Special-care items marked "Hand Washable" v' v'

Hand Washables Special-care items marked "Hand Washable" v' v'

Clean Washer No clothes, use AFFRESH TM washer cleaner tablet or chlorine

bleach

Soak Fabrics made of cotton, linen, polyester or nylon _/

Rinse/Spin Fabrics made of cotton, linen, polyester or nylon v' v'

Drain/Spin Fabrics made of cotton, linen, polyester or nylon v'

LAUNDRYTIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of

your garments.

• Use only High Efficiency detergents. The package for this type

of detergent will be marked "HE" or "High Efficiency." This

wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular

detergent will likely result in washer errors, longer cycle times

and reduced rinsing performance. It may also result in

component failures and noticeable mold or mildew. HE

detergents are made to produce the right amount of suds for

the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use.

Use only HE High Efficiency detergenL

Close zippers, snaps, and hooks to avoid snagging other

items. Remove pins, buckles, and other hard objects to avoid

scratching the washer interior. Remove non-washable trim

and ornaments.

Empty pockets and turn them inside out.

Turn down cuffs; brush away lint and dirt.

Turn wool and synthetic knits inside out to avoid pilling.

Tie strings and sashes so they will not tangle.

Mend tears, loose hems, and seams.

Treat spots and stains.

Stained or wet garments should be washed promptly for best

results.

Mix large and small items, avoid washing single items, and

load evenly.

Wash small items, such as infant socks, in a mesh garment

bag. To create a balanced load it is recommended that more

than one garment bag be used, and that each garment bag

be filled with equal amounts of material.

NOTE: If you are washing only small items, it is

recommended that more than one mesh garment bag be

used, and that each garment bag be filled with equal

amounts of material.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if

they would normally be washed together. Separate lint-givers

(towels, chenille) from lint-takers (corduroy, synthetics,

permanent press). When possible, turn lint-givers inside out.

• Separate dark colors from light colors, colorfast items from

noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate

items).

Unloading

• Remove clothes from washer after the cycle is completed.

Metal objects such as zippers, snaps, and buckles may rust if

left in the washer basket for a long time.

• When unloading garments, occasionally check under the gray

colored seal at the front of the tub for small items.

Loading suggestions

Heavy Work Clothes

4 jeans 2 sweatpants

4 workpants 2 sweatshirts

4 workshirts

Towels

10 bath towels 14 washcloths

10 hand towels

Mixed Load

3 sheets (1 king, 2 twin) 9 T-shirts

4 pillowcases 9 shorts

3 shirts 10 handkerchiefs

3 blouses

WASHERCARE

The Washer Maintenance Procedure should be performed on a monthly basis.

Cleaning the door seal

1. Open the washer door and remove any clothing or items from

the washer.

2. Inspect the gray colored seal between the door opening and

the basket for stained areas. Pull back the seal to inspect

areas under the seal. Remove any foreign objects.

A. Seal

3. If stained areas are found, wipe down these areas of the seal,

using the procedure that follows.

a} Mix a dilute solution, using ¾ cup (177 mL) of liquid

chlorine bleach, and 1 gal. (3.8 L) of warm tap water.

b} Wipe the seal area with the dilute solution, using a damp

cloth.

c} Let stand 5 minutes.

d} Wipe down area thoroughly with a dry cloth and let the

washer interior air dry with door open.

IMPORTANT:

• Wear rubber gloves when cleaning for prolonged periods.

• Refer to the bleach manufacturer's instructions for proper

use.

Begin procedure

1. Open the washer door and remove any clothing or items from

the washer.

2. Using the AFFRESH TM washer cleaner (Recommended):

Add one AFFRESH TM washer cleaner tablet to the washer

drum.

If using liquid chlorine bleach:

Open the dispenser drawer and immediately add ¾ cup

(160 mL) of liquid chlorine bleach to the bleach compartment.

NOTE: Do not add any detergent to this cycle. Use of more

than 2/3cup (160 mL) of bleach will cause product damage

over time.

3. Close the washer door and dispenser drawer.

4. Select the CLEAN WASHER cycle.

5. Press START.

NOTE: The basket will rotate, then the door will unlock, lock

again, and then the cycle will continue.

• The machine will bring in some inlet water, and the basket

will rotate while the washer runs a short sensing cycle.

This will take approximately 3 minutes.

The cycle will determine whether clothing or other items are

in the washer.

a} If no items are detected in the washer, it will proceed to

Step 7.

b} If any items are detected in the washer, "rL" will be

displayed, and the WASH and CONTROLS LOCKED

lights will remain lit. The door will unlock. Open and

remove any garments in the wash drum.

• Press PAUSE/CANCEL to cancel the failure code.

Then repeat steps 3, 4 and 5 to start the cycle again.

7. Once the cycle has begun, allow the cycle to complete.

8. After the cycle is complete, leave the door open slightly, to

allow for better ventilation and drying of washer interior.

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes

and steam, in combination with AFFRESW Mwasher cleaner or

liquid chlorine bleach to thoroughly clean the inside of the

washer.

NOTES:

• Read these instructions completely before beginning the

cleaning process.

If necessary, the cleaning cycle may be interrupted by

pressing the Pause/Cancel button. However, this will not

immediately stop the cycle. The machine will display "int"

(interrupt) and continue with several rinse and drain steps to

ensure that all remaining bleach is rinsed from the washer.

Always do the following to maintain washer freshness

• Use only HEHigh Efficiency detergent.

• Leave the door slightly open after each cycle to allow for

better ventilation and drying of washer interior.

• Repeat the cleaning procedure monthly or when the CLEAN

WASHER REMINDER light illuminates.

• If you are not ready to run the Clean Washer cycle, but the

Clean Washer Reminder light is illuminated, press the Clean

Washer Reset button.

• If the procedure does not sufficiently improve the machine

freshness, evaluate your installation and usage conditions for

other causes.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills.

Occasionally wipe the outside of your washer to keep it looking

new. Use mild soap and water. Do not use abrasive products.

Cleaning the dispenser drawer

The dispenser drawer is removable for easy cleaning.

1. Unlock the dispenser drawer by pressing the Release Lever.

See "Using the Dispenser." Remove the drawer.

2. Remove the inserts (the siphon from the softener and bleach

compartments and the detergent selector).

3. Wash the parts under running water.

4. Replace the inserts and return the dispenser to the drawer.

Replace inlet hoses after 5 years of use to reduce the risk of hose

failure. Periodically inspect and replace inlet hoses if bulges,

kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Install and store your washer where it will not freeze. Because

some water may stay in the hoses, freezing can damage your

washer. If storing or moving your washer during freezing weather,

winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on

vacation or not using your washer for an extended period of time,

you should:

• Unplug washer or disconnect power.

• Turn off the water supply to the washer. This helps avoid

unintended flooding (due to awater pressure surge) while you

are away.

• Slightly open door to provide ventilation.

To winterize washer:

1. Put 1 qt (1 L) of R.V.-type antifreeze in the drum.

2. Run washer on a Drain/Spin cycle.

3. Unplug washer or disconnect power.

4. Shut off both water faucets.

5. Disconnect water inlet hoses from faucets and drain.

To use washer again:

1. Flush water pipes. Reconnect water inlet hoses to faucets.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord,

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run the washer through the Normal/Casual cycle with _/2the

manufacturer's recommended amount of HE detergent for a

medium-size load, to clean the washer and remove the

antifreeze, if used.

To transport the washer:

1. If washer will be moved during freezing weather, put in

1 qt (1 L) of R.V.-type antifreeze in the drum. Run washer on a

Drain/Spin cycle.

2. Unplug the power cord.

3. Disconnect the drain hose from the drain system and attach

to rear panel clips.

4. Shut off both water faucets.

5. Disconnect the water inlet hoses from faucets, then drain the

hoses and clip them to the rear panel of the washer.

IMPORTANT: Call for service. Do not reuse transport bolts.

Washer must be transported in the upright position. To avoid

suspension and structural damage to your washer, it must be

properly set up for relocation by a certified technician.

Reinstalling the washer

1. Follow the "Installation Instructions" to locate, level and

connect the washer.

2. Run the washer through the Normal/Casual cycle with _/2the

manufacturer's recommended amount of HE detergent for a

medium-size load, to clean the washer and remove the

antifreeze, if used.

La page charge ...

Whirlpool WFW9500TC00 Le manuel du propriétaire

Marque: Whirlpool

Modèle: WFW9500TC00

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WFW9500TC00 Owner's manual

Whirlpool WFW9500TC00 Le manuel du propriétaire

Whirlpool WFW9500TC00 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents