Whirlpool WFW8300SW05 Le manuel du propriétaire

Marque: Whirlpool

Modèle: WFW8300SW05

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

W10117767A

FRONT.LOADING

AUTOMATICWASHER

For questions about features, operation/performance,

parts, accessories or service call: 1-800-253-1301

In Canada, call: 1-800-807-6777

or visit our website at

www.whirlpool.com or www.whirlpool.ca

LAVEUSE

AUTOMATIQUEA

CHARGEMENTFRONTAL

:£_{]e 1] e, d ( s/;r {

Au Canada, pour assistance, installation ou service, composez le :

1-800-807-6777

ou visitez notre site internet &

www.whirlpool.ca

Table of Contents/Table des matieres .................. 2

Designed to use only HE

High Efficiency Detergent

Con cue pour I'utilisation

d'un detergent HE Haute

efficacite seulement

TABLEOFCONTENTS

WASHER SAFETY ......................................................................... 3

INSTALLATION REQUIREMENTS ................................................ 4

Tools and Parts ............................................................................ 4

Options ......................................................................................... 4

Location Requirements ................................................................ 4

Drain System ................................................................................ 6

Electrical Requirements ............................................................... 7

INSTALLATION INSTRUCTIONS .................................................. 8

Remove Transport System .......................................................... 8

Connect the Inlet Hoses ............................................................... 8

Route the Drain Hose ................................................................... 9

Secure the Drain Hose ................................................................. 9

Level the Washer ........................................................................ 10

Complete Installation ................................................................. 10

FEATURES AND BENEFITS ........................................................ 11

WASHER USE ............................................................................... 12

Starting Your Washer ................................................................. 12

Using the Proper Detergent ....................................................... 12

Using the Dispenser ................................................................... 13

Pausing or Restarting ................................................................. 14

Changing Cycles and Options ................................................... 14

Status Lights .............................................................................. 14

Cycles ......................................................................................... 15

Normal Sounds .......................................................................... 16

Options and Modifiers ................................................................ 16

Laundry Guide ............................................................................ 17

LAUNDRY TIPS ............................................................................ 17

Loading ....................................................................................... 18

Stain Removal Guide ................................................................. 18

WASHER CARE ............................................................................ 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ....................................................................... 20

Vacation, Storage, and Moving Care ......................................... 20

TROUBLESHOOTING .................................................................. 21

Washer and Components .......................................................... 21

Washer Operation ...................................................................... 22

Clothes Care ............................................................................... 23

ASSISTANCE OR SERVICE ......................................................... 24

In the U.S.A ................................................................................ 24

In Canada ................................................................................... 24

WARRANTY .................................................................................. 25

TABLEDESMATIERES

SI_CURITI_ DE LA LAVEUSE ........................................................ 26

EXIGENCES D'INSTALLATION ................................................... 27

Outillage et pieces ...................................................................... 27

Options ....................................................................................... 27

Exigences d'emplacement ......................................................... 28

Systeme de vidange ................................................................... 29

Specifications electriques .......................................................... 30

INSTRUCTIONS D'INSTALLATION ............................................. 31

Elimination des accessoires de transport .................................. 31

Raccordement des tuyaux d'alimentation ................................. 31

Acheminement du tuyau de vidange ......................................... 32

Immobilisation du tuyau de vidange .......................................... 32

Reglage de I'aplomb de la laveuse ............................................ 33

Achever I'installation .................................................................. 33

CARACTI_RISTIQUES ET AVANTAGES ..................................... 34

UTILISATION DE LA LAVEUSE ................................................... 35

Mise en marche de la laveuse .................................................... 35

Utilisation du detergent approprie ............................................. 35

Utilisation du distributeur ........................................................... 36

Pause ou remise en marche ....................................................... 37

Modification des programmes et options .................................. 37

Temoins lumineux ...................................................................... 38

Programmes ............................................................................... 38

Sons normaux ............................................................................ 40

Options et modificateurs ............................................................ 40

Guide de lessivage ..................................................................... 41

CONSEILS DE LESSIVAGE .......................................................... 42

Chargement ................................................................................ 42

Guide pour I'elimination des taches ........................................... 43

ENTRETIEN DE LA LAVEUSE ..................................................... 44

Nettoyage de la laveuse ............................................................. 44

Tuyaux d'arrivee d'eau ............................................................... 45

Precautions a prendre avant les vacances,

un entreposage ou un dem6nagement ...................................... 45

DC:PANNAGE ................................................................................. 46

La laveuse et ses composants ................................................... 46

Fonctionnement de la laveuse ................................................... 47

Entretien des v_tements ............................................................. 49

ASSISTANCE OU SERVICE ......................................................... 50

Aux Ctats-Unis ............................................................................ 50

Au Canada .................................................................................. 50

GARANTI E ..................................................................................... 51

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. Ifthe hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[] Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

[] Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESE INSTRUCTIONS

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation.

The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 1%6" [39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrenches 14 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape

Parts supplied

Pedestal

You have the option of purchasing pedestals of different heights

separately for this washer. You may select a 10" (25.4 cm) or a

15.5" (39.4 cm) pedestal. The pedestal will add to the total height

of the washer.

A. U-shaped hose form

B. Water inlet hoses (2)

C. Inlet hose washers (4)

D. Transit bolt hole plug (4)

E.Beaded tie strap

Alternate Parts

Your installation may require additional parts. Ifyou are interested

in purchasing one of the items listed here, call the toll-free

number on the cover or in the "Assistance or Service" section.

If You Have You Will Need to Buy

Laundry tub or Sump pump system (if not already

standpipe taller available)

than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm) tall

drain tub or utility sink and sump pump

(available from local plumbing suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose

Part Number 8318155; and connector kit,

Part Number 2858835

Drain hose too 4 ft (1.2 m) drain hose extension kit,

short Part Number 2858863

Water faucets 2 longer water fill hoses:

beyond reach of fill 6 ft (1.8 m) Part Number 76314

hoses 10 ft (3.0 m) Part Number 350008

Optional pedestal

Pedestal Approximate Color Model

Height Height with Number

Washer

10" (25.4 cm) 46" (116.8 cm) White WHP1000SQ

15.5" (39.4 cm) 51.5" (130.8 cm) White WHP1500SQ

Stack Kit

Are you planning to stack your washer and dryer? To do so you

will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your washer

or refer to the "Assistance or Service" section of this manual. Ask

for Part Number 8572546.

Selecting the proper location for your washer improves

performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a

basement, laundry room, closet, or recessed area. See "Drain

System."

Companion appliance location requirements should also be

considered. Proper installation is your responsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of

where the power cord is attached to the back of the washer.

See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the

hot and cold water fill valves, and water pressure of

20-100 psi (137.9-689.6 kPa).

• A level floor with a maximum slope of 1" (2.5 cm) under entire

washer. Installing the washer on soft floor surfaces, such as

carpets or surfaces with foam backing, is not recommended.

• A sturdy and solid floor to support the washer with a total

weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C).

Some water can remain in the washer and can cause damage in

low temperatures.

Installation clearances

• The location must be large enough to allow the washer door

to be fully opened.

• Additional spacing should be considered for ease of

installation and servicing. The door opens more than 90°,and

it is not reversible.

• Additional clearances might be required for wall, door, and

floor moldings.

• Additional spacing of 1" (2.5 cm) on all sides of the washer is

recommended to reduce noise transfer.

• Companion appliance spacing should also be considered.

Washer Dimensions

601/4"

(127.6cm)

36"

(91.4 crn)

. (74.3crn)

Recommended installation spacing for custom

undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

36" rnin,

(91.4 crn)

l"---qF-

(2.3 cm) 1/(68.6 cm) ii (2.5 crn}

Recommended installation spacing for recessed or

closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

40"

(122crn}

M 1"_- 29'/4"-'_ 4" _"

(2,3crn) (74.3crn) (1O,2crn)

48 in?_

(310cm2)'

24 in.2_

(155crn2)

,_ 3"

(7.0cm)

--f

•_-- 3"

(7.0cm)

A. Side view - closet or confined area

B. Closet door with vents

Recessed or closet installation - Washer on pedestal

38"rnin.

(96,5 cm)

1" -'_ _------ 27" -_ _'- 1" --_ 1" 29V4"-_1 4" I_-

(2,5crn) (68.6cm) (2,5crn) (2,5crn) (74.3crn) (10.2cm)

A. Recessed area

B. Side view - closet or confined area

Recommended installation spacing for recessed or

closet installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 in,2*

(310 crn2}

24 in.2*

(166crn_)

3"(7,6cm)

3"(7.6crn)

12"(_0.5cm)

1"(2.5cm}

91/¢**

(13.3 crn)

72"

(182.9 crn)

1"*** _ _ 2T'-:_,,,- _ 1"***

2.9 cm 68.6 crn _(2.5 crn)

*Min. top and bottom air openings for closet door.

**External exhaust elbow requires additional space.

***Wall, door and floor molding may require additional spacing.

Recommended installation spacing for cabinet

installation

The dimensions shown are for the recommended spacing.

For cabinet installation, with a door, the minimum ventilation

openings in the top are required.

7"(17.8cm)

7"(17.8crn)

_-_1

4" 311/2" 1"

1" 27" 1"

(10.2cm) (80era) (2,9cm) (2,gcm)(68,6crn)(2.6cm)

(22,9 cm)

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain

system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than

17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and

no higher than 96" (2.4 m) from the bottom of the washer.

f--

30"rain.

(76,2 cm)

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (76.2 cm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

C D

Electrical Shock Hazard

Pluginto a grounded 3 prongoutlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failureto follow these instructions can result in death,

fire, or electrical shock.

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical

supply is required. A time-delay fuse or circuit breaker is

recommended. It is recommended that a separate circuit

serving only this appliance be provided.

This washer is equipped with a power supply cord having a

3 prong grounding plug.

To minimize possible shock hazard, the cord must be

plugged into a mating, 3 prong, grounding-type outlet,

grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility

and obligation of the customer to have the properly grounded

outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is

recommended that a qualified electrician determine that the

ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure the

washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer

is within approximately 3 ft (90 cm) of its final location.

There are 4 blue bolts in the rear panel of the washer that support

the suspension system during transportation. These bolts also

retain the power cord inside the washer until the bolts are

removed.

Using a 13 mm wrench, loosen each of the bolts.

Once the bolt is loose, move it to the center of the hole and

completely pull out the bolt, including the plastic spacer

covering the bolt.

3. Once all 4 bolts are removed, discard the bolts and spacers.

Then pull the power cord through the opening of the rear

panel and close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your

local service center. To avoid suspension and structural damage,

your machine must be properly set up for relocation by acertified

technician.

Insert new flat washers (supplied) into each end of the inlet

hoses. Firmly seat the washers in the couplings.

A B

A. Coupling

B. Washer

Connect the inlet hoses to the water faucets

Make sure the washer drum is empty.

1. Attach a hose to the hot water faucet. Screw on coupling by

hand until it is seated on the washer.

2. Attach a hose to the cold water faucet. Screw on coupling by

hand until it is seated on the washer.

3. Using pliers, tighten the couplings with an additional

two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve.

Damage to the valves can result.

Clear the water lines

• Run water through both faucets and inlet hoses, into a

laundry tub, drainpipe or bucket, to get rid of particles in the

water lines that might clog the inlet valve screens.

• Check the temperature of the water to make sure that the hot

water hose is connected to the hot water faucet and that the

cold water hose is connected to the cold water faucet.

Connect the inlet hoses to the washer

H. Hot water inlet

C. Cold water inlet

1. Attach the hot water hose to the washer's hot (H) water inlet

valve. Screw on coupling by hand until it is seated on the

washer.

2. Attach the cold water hose to the washer's cold (C) water

faucet. Screw on coupling by hand until it is seated on the

washer.

3. Using pliers, tighten the couplings with an additional

two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can

result.

Turn on the water faucets completely and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement

dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,

wear, or leaks are found.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A. Snap either end of the drain hose form to the drain hose at the

point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess

drain hose into standpipe. Hose should be secure, but loose

enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and

Parts."

* >

1. Drape the power cord over the washer top.

2. Move the washer to its final location.

3. Place the drain hose in the laundry tub or standpipe as

shown. See illustrations A and B.

Proper routing of the drain hose protects your floor from damage

due to water leakage. Read and follow these instructions.

Remove drain hose from the washer

Gently pull the corrugated drain hose from the shipping clips.

4. If the washer faucets and the drain standpipe are recessed,

put the hooked end of the drain hose in the standpipe as

shown. See illustration C.

NOTES:

• Do not force excess drain hose back into the rear of the

washer.

• To avoid siphoning, do not seal the drain hose into the

standpipe.

Properlylevelingyourwasheravoidsexcessivenoiseand

vibration.

1. Checkthelevelnessofthewasherbyplacingalevelonthe

topedgeofthewasher,firstsidetoside,thenfronttoback.

1. Checktheelectricalrequirements.Besurethatyouhavethe

correctelectricalsupplyandtherecommendedgrounding

method.See"ElectricalRequirements."

2. Checkthatallpartsarenowinstalled.Ifthereisanextrapart,

gobackthroughthestepstoseewhichstepwasskipped.

3. Checkthatyouhaveallofyourtools.

4. Disposeof/recycleallpackagingmaterials.

5. Checkthatthewaterfaucetsareon.

6. Checkforleaksaroundfaucetsandinlethoses.

If the washer is against a wall, move the washer out slightly

before tipping back. If the washer is not level, first prop the

front with a wood block and adjust the feet as necessary;

then prop the back and adjust feet as necessary. Repeat this

step until washer is level.

Make sure all four feet are stable and resting on the floor.

Then check that the appliance is perfectly level (use a level).

After the washer is level, use a 14 mm open-end wrench to

turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are

not tight against the washer cabinet, the washer may vibrate.

4. The washer should not move front to back, side to side, or

diagonally when pushed on its top edges.

5. Slide the washer to its final location.

6. Confirm the levelness of the washer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord,

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

Totest and to clean your washer, measure 1/2the detergent

manufacturer's recommended amount of HE High Efficiency

detergent for a medium-size load. Pour the detergent into the

detergent dispenser. Select NORMAL/CASUAL, and then

select START. Allow the washer to complete one whole cycle.

Use only HE High Efficiency detergenL

FEATURESANDBENEFITS

Your new front-loading high efficiency washer, was designed to

conserve resources and lower your water and energy bills. The

washer is designed to determine and then provide the amount of

water needed for the best performance. The time of operation

may be greater for this new system than for a conventional

washer.

Electronic Controls

Flexible electronic controls are easy to use whether you are a

beginner or an expert.

Auto Water Level

Adjusting to the size of the load, this feature allows the washer to

use the minimal amount of water needed to clean and rinse the

clothes. With a low water level, you can obtain the same results

with smaller amounts of laundry products. Because only the

required amount of water is used, the washer saves energy, too.

You can obtain the same washing results for small and large load

sizes.

Larger Load Size

Since there is no agitator, you can wash larger, bulkier items such

as an average size sleeping bag. You are also able to wash more

clothes at one time, which means fewer loads. You can wash a

pillow or a large stuffed teddy bear.

Suspension System

To reduce washer "walk" and "off-balance" conditions, your new

washer combines:

• 2 Springs to isolate vibration

• 3 Shock absorbers at the washer base to minimize

movement

Spin Speeds

This washer automatically selects the spin speed based on the

cycle selected. For some cycles, the default spin speed can be

changed if desired. This washer offers up to three different spin

speed choices.

Add A Garment

This option is available in all wash cycles except Rinse/Spin,

Drain/Spin, and Clean Washer. When this option is available at

the beginning of the cycle, the Add A Garment status light will

illuminate for the first 7 minutes. This washer allows a 7-minute

period in which other garments may be added to a load.

Dynamic Balance

A precision balancing system allows the washer to reach high-

speed spins. The washer spins faster so that clothes coming out

of the washer will have less moisture than with traditional top

load machines. In addition, if the Dynamic Balance system

detects off-balance loads during spinning, it redistributes the

clothes so that they are evenly balanced.

Smart Dispensers

The three compartments in the dispenser allow loading of all

laundry products before the washer is started. The products will

be dispensed into the wash at the optimal time for high-

performance cleaning. The bleach release system is included in

the detergent advantage system. The detergent is added at the

beginning of the cycle, and the bleach is added after the

enzymes have had a chance to do their cleaning. The fabric

softener is dispensed in the rinse cycle or in the EXTRA RINSE, if

selected. The Detergent Advantage System Dispenser tray is

easily removed for cleaning.

Stainless Steel Drum

The stainless steel drum eliminates corrosion and enables higher

spin speeds for more water extraction, reducing drying time.

Adaptive Variable Speed Motor

The motor adapts to the load size and to the cycle selected to

give the optimum cleaning, rinsing, and spinning conditions. The

motor can handle slow speeds needed for delicate items and is

powerful enough to drive an average clothes load up to high-

speed spin.

Use only HE High Efficiency detergenL

WASHERUSE

_rLock_d

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils),

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

The following is a guide to using your washer. Please refer to

specific sections of this manual for more detailed information.

Do not store laundry products on the top surface of this washer.

Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type of

detergent will be marked "HE" or "High Efficiency." This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times, and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer's instructions to determine the amount of detergent

to use.

Use only HE High Efficiency detergent.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during

the final installation step, choose the Normal/Casual cycle and

run it without clothes. Use only HE High Efficiency detergent. Use

1/2the manufacturer's recommended amount for a medium-size

load. This initial cycle serves to ensure the interior is clean before

washing clothes.

For All Wash Cycles

To load washer

Open the washer door by pulling on the handle. Sort laundry

according to color and type of fabric. Place a load of sorted

clothes in the washer. Do not overload washer. Overloading

can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

• Mix large and small items. Avoid washing a single item.

Load evenly.

• Wash small items such as infant socks in mesh garment

bags. It is recommended that more than one garment bag

be used and that each garment bag be filled with equal

amounts of material.

• When unloading garments, occasionally check under the

rubber rim at the front of the tub for small items.

Close the washer door by pushing it firmly until the lock

clicks. The washer door will remain locked during the wash

cycle.

NOTE: After any wash cycle is completed, the door must be

opened and then closed before a new cycle can begin. The

door can be opened only if PAUSE/CANCEL is selected while

the ADD A GARMENT light is illuminated or if the cycle has

been canceled. See "To cancel a cycle" in the "Changing

Cycles and Options" section.

3. Open the dispenser drawer and add laundry products to the

detergent, bleach, or fabric softener compartments. Close

drawer slowly to avoid spills. See "Using the Dispenser."

4. Turn on the washer by selecting POWER. Select one of the

cycles by turning the cycle selector. The indicator light for the

selected cycle will illuminate. When selecting a Wash Cycle,

the preset Modifiers and Options, Water Temp, and Spin

Speed for the selected cycle will illuminate. The preset

settings provide the recommended fabric care for the

selected cycle. See "Cycles."

5. Select the desired OPTIONS. Not all Options are available

with all cycles. See "Options."

6. If desired, select the END OF CYCLE SIGNAL. The signal is

helpful when you are washing items that should be removed

from the washer as soon as it stops. Press END OF CYCLE

SIGNAL to select ON or OFR

7. To begin the wash cycle immediately

Select and hold START (for approximately 1 second).

• Ifyou do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off.

• When the wash cycle is complete, the CYCLE

COMPLETE status light illuminates, the door unlocks, and

the wash load can be removed from the washer. The

washer powers down automatically 5 minutes after the

cycle is complete and the CYCLE COMPLETE light goes

off. To power down the washer manually after the wash

cycle is complete, select PAUSE/CANCEL once.

8. To begin the wash cycle later

Select DELAY WASH until the desired delay time (in hours) is

displayed. Select START. The countdown to the wash cycle

will show in the display window.

IMPORTANT: When delaying a cycle, use only powdered

detergents in the main wash compartment since liquid

detergents may seep out of the compartment during Delay,

before the wash cycle begins.

Your new washer has a dispenser drawer with three separate

compartments for your laundry products--one is for detergent,

one is for liquid chlorine bleach, and one is for liquid fabric

softener. Laundry products are diluted and dispensed

automatically at the proper time during the wash cycle, making it

unnecessary for you to return to the washer during the cycle to

add them.

It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Do not put laundry products directly into the wash tub. Always

use the proper dispensers when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of

detergent will be marked "HE" or "High Efficiency." This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result in

washer errors, longer cycle times, and reduced rinsing performance.

It may also result in component failures and noticeable mold or

mildew. HE detergents are made to produce the right amount of

suds for the best performance. Follow the manufacturer's

instructions to determine the amount of detergent to use.

Use only HE High Efficiency detergent.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry products to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid

a spill).

Dispenser

A. Dispenser release lever

B. Main Wash detergent compartment

C. Liquid chlorine bleach compartment

D. Fabric softener compartment

Main Wash detergent compartment

(Letter B in Dispenser Illustration)

Add liquid or powdered HE detergent to this compartment for

your main wash cycle.

• Powdered color-safe bleach may be added to the Main Wash

compartment along with the powdered detergent.

• Use the measurement device which comes with the

detergent. Add no more than the manufacturer's

recommended amount.

NOTE: Overfilling could cause an oversudsing condition.

Chlorine bleach compartment

(Letter C in Dispenser Illustration)

Add NO MORE THAN % cup (160 mL) liquid chlorine bleach to

this compartment. The bleach will be automatically diluted and

dispensed at the best time during the first rinse after the wash

cycle. This compartment cannot dilute powdered bleach.

• Use only liquid chlorine bleach in this dispenser. Do not use

this dispenser to add powdered chlorine or any form of color-

safe bleach to your load.

• Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess. Follow the manufacturer's

directions for proper use.

• Do not fill beyond the "MAX" level.

NOTE: Overfilling could cause garment damage.

Fabric softener compartment

(Letter D in Dispenser Illustration)

Add 1/4cup (60 mL) liquid fabric softener to this compartment.

Fabric softener will be automatically dispensed in the final rinse

or in the EXTRA RINSE, if selected.

• Do not fill beyond the "MAX" level.

1. To pause the washer at any time, select PAUSE/CANCEL

2. To continue the cycle, select and hold START (for

approximately 1 second).

Not all Options are available with all Cycles.

Cycles and Options can be changed anytime before START is

selected.

To stop a cycle and select a new cycle

1. Select PAUSE/CANCEL once.

2. Select desired cycle.

3. Select the desired OPTIONS.

4. Select and hold START (for approximately 1 second) to restart

the washer at the beginning of the new cycle.

To cancel a cycle

1. Select PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can

be removed.

NOTE: If the water level or the temperature is too high, the

washer will drain automatically before the door unlocks.

To change Options after the cycle has started

1. Select PAUSE/CANCEL once.

2. Select the desired OPTIONS. If the option is not available, the

machine will beep.

3. Select and hold START (for approximately 1 second) to

continue the cycle.

To drain the washer manually

1. Select PAUSE/CANCEL

2. Select DRAIN/SPIN.

3. Select and hold START (for approximately 1 second) to begin

the drain.

4. When the spin is complete, the door unlocks. Items can be

removed from the washer.

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

ADDA GARMENTS_

WASHMy

RINSE_

SPIN_/

CYCLECOMPLETE_y

Adding items

You can add items to the washer after the wash cycle has

started, if the ADD A GARMENT status light is illuminated. All

cycles have this feature except Rinse/Spin, Drain/Spin, and

Clean Washer.

To add items

1. Select PAUSE/CANCEL The washer door unlocks, and items

can be added.

2. To continue the cycle, close the door and select and hold

START (for approximately 1 second).

NOTE: To add garments after the ADD A GARMENT period is

over, the wash cycle needs to be canceled, the items added, and

a new wash cycle started.

Cycle Complete

The Cycle Complete light stays on for 5 minutes after the cycle is

complete. The washer will then power down.

Locking controls

The Control Lock avoids unintended use of the washer. You can

also use the control lock feature to avoid unintended cycle or

option changes during a cycle. When CONTROL LOCKED is lit,

all buttons are disabled except for PAUSE/CANCEL and START.

You can lock the controls while the washer is operating.

To lock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds.

ENDOF

CYCLESIGNAL

Hold3secondsto-i

LocklUnlockControl

The CONTROL LOCKED status light illuminates.

To unlock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds until the

CONTROL LOCKED Status light turns off.

Estimated Time Remaining

The cycle times vary automatically based on your water pressure,

water temperature, detergent, and clothes load. The cycle time

will be extended if oversudsing occurs or the load is unbalanced.

The SUDs routine removes extra suds and assures proper rinsing

of your garments. The options you select will also affect the cycle

times that are shown in the Preset Cycle Settings table. The

Estimated Time Remaining can change up to 30 minutes under

extreme conditions.

Door Locked

When the status light illuminates, the door is locked. The door is

locked and unlocked automatically, depending on the stage of

the wash cycle.

Wash Cycles

Choose Wash Cycles by rotating the Cycle selector knob to the

desired cycle. The indicator light for the cycle selected will

illuminate. Each cycle is designed for different types of fabric and

soil levels.

Ww,#,,T

QUIC

_(_ _,.\_ DRAIN/

,:],[i*_JSPIN

CYCLES

Each cycle has a preset cycle time, WASH TEMP, SPIN

SPEED, and may have preset Options. The preset settings

provide the recommended fabric care for the selected cycle.

The preset settings can be changed anytime before START is

selected. Not all Options and Modifiers (WASH TEMP, SPIN

SPEED) are available with all Cycles. To change settings after

the cycle has started, select PAUSE/CANCEL, then select the

desired settings. Select and hold START (for approximately

1 second) to continue the cycle.

Preset Cycle Settings

Each cycle has a preset Cycle Time, WASH/RINSE TEMP, and

SPIN SPEED. The preset settings provide the recommended

fabric care for the selected cycle. See chart.

Cycle Estimated Wash Spin

Time* Temp Speed

(hr:min)

Whitest Whites 1:25 Hot High

Heavy Duty 1:11 Hot High

Normal/Casual 0:54 Warm High

Quick Wash 0:28 Warm High

(2-3 items)

Delicate 0:37 Warm Medium

Clean Washer 0:54 N/A High

Rinse/Spin 0:34 Cold High

Drain/Spin 0:14 N/A High

*The cycle times vary automatically based on your water

pressure, water temperature, detergent, and clothes load. The

cycle time will be extended if oversudsing occurs or the load is

unbalanced.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled

white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse

provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer

wash time, and high-speed spin to shorten drying time. It also

includes Extra Rinse as a preset setting.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and

Heavy soiled garments. This cycle combines fast-speed

tumbling, longer wash time, and high-speed spin to shorten

drying times.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press

blends, cottons and linens, and synthetic fabrics. This cycle

combines medium-speed tumbling, high-speed spin, and a load

cooling process to reduce wrinkling.

Quick Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments

that are needed in a hurry. This cycle combines fast-speed

tumbling, a shortened wash time, and high-speed spin to shorten

drying time. Large wash loads will result in the machine

increasing the wash time.

Delicate

Use this cycle to wash sheer fabrics and lingerie. This cycle

combines low-speed tumbling and low-speed spin for gentle

fabric care.

• Use mesh garment bags to wash undergarments such as

underwire bras, items with strings, and small items such as

socks.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of

your washer fresh and clean. This cycle uses a higher water level

in combination with liquid chlorine bleach to thoroughly clean the

inside of your washing machine. See "Cleaning Your Washer."

IMPORTANT: Do not place garments or other items in the washer

during the Clean Washer cycle. Use this cycle with an empty

wash drum.

Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle combines

fast-speed tumbling and high-speed spin. If desired, you can

reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

Rinse & Spin is useful for:

• Loads that need rinsing only.

• Adding fabric softener to a load using the fabric softener

dispenser.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your

wash load. The spin speed is preset to HIGH. If desired, you can

reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and

woolens should be drained with no spin or low spin to avoid

fabric stress.

As with any new product, you will hear sounds that you are not

accustomed to. You may hear various sounds when the door is

locked or unlocked, and during the washing, rinsing, or spinning

process. Between changes in wash actions, there will be

momentary pauses. You will hear water spraying and splashing

during the wash and rinse cycles. These new sounds and pauses

are part of normal washer operation. See "Troubleshooting."

You can customize your wash by adding options to your cycle

selections. You can add or change an option after starting a cycle

anytime before the selected option begins. Not all Options are

available with all cycles.

_ (_

DELAY

WASH

EXTRA

RINSE

WASHTEMP SPINSPEED ENDOF

AllColdRinses CYCLESIGNAL

Hold3 secondsto-I

Lock/U_lockControl

See the "Laundry Guide" section for an overview of possible

options for each Wash Cycle selection.

If an option is available with a selected cycle, the light for that

option will illuminate when selected.

If an option is unavailable with a selected cycle, there will be a

short tone and the light for that option will not illuminate when

selected.

Delay Wash

Use this to begin the wash cycle later.

• Select DELAY WASH until the desired time (in hours) shows in

the Estimated Time Remaining display.

• Select START. The countdown to the wash cycle will show in

the display window.

Extra Rinse

An extra rinse can be used to aid in the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as in the normal rinse. It is

a preset setting for the Whitest Whites cycle. You may select or

deselect by pressing EXTRA RINSE.

Wash Temp

Each cycle has a preset water temperature setting. Tochange the

water temperature, select the WASH TEMP button until the

desired setting is illuminated.

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

The water temperature for all rinse cycles is cold. Cold rinses

save energy.

Temperature Guide

Wash Water Temperature Suggested Fabrics

HOT Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

Light soils

In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control

ATC (Auto Temp Control) electronically senses and maintains a

uniform water temperature. ATC regulates incoming hot and cold

water. The ATC is automatically turned ON when a cycle is

selected. See Preset Cycle Settings table in "Cycles."

• ATC works for the wash temperature with Warm and Cold

settings.

• The Cold rinse temperatures depend on the cold water at

your faucet.

Spin Speed

Each cycle has a preset spin speed. To change the spin speed,

select the SPIN SPEED button until the desired setting is

illuminated.

End of Cycle Signal

This signal is helpful when you are removing items from the

washer as soon as it stops. Select ON or OFE

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these

washer cycles.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Delay Extra End of

Wash Rinse Cycle Signal

Whitest Whites Soiled white fabrics v' v' v'

Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of cotton v' v' v'

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of polyester, nylon, v' v' v'

cotton, linen, or cotton blends

Quick Wash Small loads of 2-3 lightly soiled cotton, polyester, nylon, and cotton v' v' v'

blends.

Delicate Curtains and delicate clothing, dresses, skirts, shirts and blouses, v' v' v'

Clean Washer No clothes v' v'

Rinse/Spin All loads v' v' v'

Drain/Spin All loads v' v'

LAUNDRYTIPS

Preparing clothes for washing •

Follow these recommendations to help you prolong the life of •

your garments.

• Use only High Efficiency detergents. The package for this type •

of detergent will be marked "HE" or "High Efficiency." This

wash system, along with less water, will create too much •

sudsing with a regular non-HE detergent. Using regular

detergent will likely result in washer errors, longer cycle times

and reduced rinsing performance. It may also result in •

component failures and noticeable mold or mildew. HE

detergents are made to produce the right amount of suds for

the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use.

Mend tears, loose hems, and seams.

Treat spots and stains.

Stained or wet garments should be washed promptly for best

results.

Mix large and small items, avoid washing single items, and

load evenly.

Wash small items, such as infant socks, in a mesh garment

bag. To create a balanced load it is recommended that more

than one garment bag be used, and that each garment bag

be filled with equal amounts of material.

NOTE: If you are washing only small items, it is

recommended that more than one mesh garment bag be

used, and that each garment bag be filled with equal

amounts of material.

Use onlyHE High Efficiency detergent.

• Close zippers, snaps, and hooks to avoid snagging other

items. Remove pins, buckles, and other hard objects to avoid

scratching the washer interior. Remove non-washable trim

and ornaments.

• Empty pockets and turn them inside-out.

• Turn down cuffs; brush away lint and dirt.

• Turn synthetic knits inside-out to avoid pilling.

• Tie strings and sashes so they will not tangle.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if

they would normally be washed together. Separate lint-givers

(towels, chenille) from lint-takers (corduroy, synthetics,

permanent press). When possible, turn lint-givers inside-out.

• Separate dark colors from light colors, colorfast items from

noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate

items).

Unloading

• Remove clothes from washer after the cycle is completed.

Metal objects such as zippers, snaps, and buckles may rust if

left in the washer basket for a long time.

• When unloading garments, occasionally check under the gray

colored seal at the front of the tub for small items.

Loading suggestions

Heavy Work Clothes

2 pair pants 3 pair jeans

3 shirts 1 coverall

Mixed Load

2 double sheets or 6 pair shorts

1 king size sheet(s) 2 shirts

4 pillowcases 2 blouses

6 T-shirts 6 handkerchiefs

Towels

8 bath towels 10 washcloths

8 hand towels 1 bath mat

Delicates

3 camisoles 2 bras

4 slips 2 nighties

4 panties

QUICK WASH cycle

(2-3 garments)

2 dress shirts

1 pair dress pants

Stain Use Liquid Chlorine or Use suggested

Color-Safe Bleach Wash Cycle

if Whitest Whites

Ink

if Cold or Warm

Normal/Casual

Blood

Coffee/

Chocolate

Cosmetics

if Warm

Whitest Whites

Heavy Duty

Stain Use Liquid Chlorine or Use suggested

Color-Safe Bleach Wash Cycle

I_ Whitest Whites

Grass

,_ if Whitest Whites

Tomato

Products

. _ if Warm

_. Whitest Whites

Mud

_ Heavy Duty

Deodorants

Warm if Normal/Casual

Heavy Duty

R_eg acro__nd

Dirty

Motor Oil

Do not tumble dry soiled or stained items. Heat may permanently set stains.

WASHERCARE

Cleaning the Door Seal/Bellow

1. Open the washer door and remove any clothing or items from

the washer. 2.

2. Inspect the gray colored seal/bellow between the door 3.

opening and the basket for stained areas. Pull back the seal/

bellow to inspect all areas under the seal/bellow and to check

for foreign objects.

A. Seal/Bellow

3. If stained areas are found, wipe down these areas of the seal/

bellow, using the procedure that follows.

a} Mix a dilute solution, using ¾ cup (177 mL) of liquid

chlorine bleach, and 1 gal. (3.8 L) of warm tap water.

b} Wipe the seal/bellow area with the dilute solution, using a

damp cloth.

c} Let stand 5 minutes.

d} Wipe down area thoroughly with a dry cloth and let the

washer interior air dry with door open.

IMPORTANT:

• Wear rubber gloves when cleaning for prolonged periods.

• Refer to the bleach manufacturer's instructions for proper

use.

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes in

combination with liquid chlorine bleach to thoroughly clean the

inside of the washer.

NOTES:

• Read these instructions completely before beginning the

cleaning process.

If necessary, the cleaning cycle may be interrupted by

pressing the PAUSE/CANCEL button. This will stop the cycle.

A RINSE/SPIN cycle must then be run to thoroughly rinse the

remaining bleach from the washer. Failure to do so will cause

damage to the washer and clothing added to the next cycle.

Begin procedure

1. Open the washer door and remove any clothing or items from

the washer.

Be sure the door is closed.

Open the dispenser drawer and immediately add ¾ cup

(160 mL) of liquid chlorine bleach to the bleach compartment.

NOTE: Do not add any detergent to this cycle. Use of more

than ¾ cup (160 mL) of bleach will cause product damage

over time.

4. Be sure the dispenser drawer is closed.

5. Select the CLEAN WASHER cycle.

6. Press START.

NOTE: The basket will rotate, then the door will unlock, lock

again, and then the cycle will continue.

• The machine will not fill, but the basket will rotate while

the washer runs a short sensing cycle. This will take

approximately 3 minutes.

The cycle will determine whether clothing or other items are

in the washer.

a} If no items are detected in the washer, it will proceed to

Step 8.

b} If any items are detected in the washer, all the Cycle

lights will flash, "rL" or "F-34" will be displayed, and the

SoaWPrewash and Cycle Complete status lights will

remain lit. Then the door will unlock.

• Press PAUSE/CANCEL to cancel the failure code.

Then repeat steps 1,2 and 6 to start the cycle again.

8. Once the cycle has begun, allow the cycle to complete.

9. After the cycle is complete, leave the door open slightly, to

allow for better ventilation and drying of washer interior.

Always do the following to maintain washer freshness

• Useonly HEHigh Efficiency detergent.

• Leave the door slightly open after each cycle to allow for

better ventilation and drying of washer interior.

• Repeat the cleaning procedure monthly, using ¾ cup

(160 mL) of liquid chlorine bleach.

• If the procedure does not sufficiently improve the machine

freshness, please evaluate your installation and usage

conditions for other causes.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills.

Occasionally wipe the outside of your washer to keep it looking

new. Use mild soap and water. Do not use abrasive products.

Cleaning the dispenser drawer

The dispenser drawer is removable for easy cleaning.

f. Unlock the dispenser drawer by pressing the Release Lever.

See "Using the Dispenser." Remove the drawer.

2. Remove the inserts (the siphon from the softener and bleach

compartments).

3. Wash the parts under running water.

NOTE: Do not wash components in the dishwasher.

4. Replace the inserts and return the dispenser to the drawer.

Replace inlet hoses after 5 years of use to reduce the risk of hose

failure. Periodically inspect and replace inlet hoses if bulges,

kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Install and store your washer where it will not freeze, Because

some water may stay in the hoses, freezing can damage your

washer. If storing or moving your washer during freezing weather,

winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on

vacation or not using your washer for an extended period of time,

you should:

Unplug washer or disconnect power.

Turn off the water supply to the washer. This helps avoid

accidental flooding (due to a water pressure surge) while you

are away.

• Slightly open door to provide ventilation.

To winterize washer:

f. Put 1 qt (1 L) of R.V.-type antifreeze in the drum.

2. Run washer on a Drain/Spin cycle.

3. Unplug washer or disconnect power.

4. Shut off both water faucets.

5. Disconnect water inlet hoses from faucets and drain.

To use washer again:

1. Flush water pipes.

2. Reconnect water inlet hoses to faucets.

3. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord,

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug in washer or reconnect power.

Run the washer through the Normal/Casual cycle with 1/2the

manufacturer's recommended amount of HE detergent for a

medium-size load, to clean the washer and remove the

antifreeze, if used.

Totransport the washer:

f. If washer will be moved during freezing weather, put in 1 qt

(1 L) of R.V.-type antifreeze in the drum. Run washer on a

Drain/Spin cycle.

2. Unplug the power cord.

3. Disconnect the drain hose from the drain system and attach

to rear panel clips.

4. Shut off both water faucets.

5. Disconnect the water inlet hoses from faucets, then drain the

hoses and clip them to the rear panel of the washer.

6. IMPORTANT: Call service. Do not reuse transport bolts.

Washer must be transported in the upright position. To avoid

suspension and structural damage, your machine must be

properly set up for relocation by a certified technician,

Reinstalling the washer

f. Follow the "Installation Instructions" to locate, level and

connect the washer.

Run the washer through the Normal/Casual cycle with 1/2the

manufacturer's recommended amount of HE detergent for a

medium-size load, to clean the washer and remove the

antifreeze, if used.

La page charge ...

Whirlpool WFW8300SW05 Le manuel du propriétaire

Marque: Whirlpool

Modèle: WFW8300SW05

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WFW8300SW05 Owner's manual

Whirlpool WFW8300SW05 Le manuel du propriétaire

Ce manuel convient également à

Whirlpool WFW8300SW05 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents