Kenmore Elite HE3 110.4586 Series Le manuel du propriétaire

Marque: Kenmore

Modèle: Elite HE3 110.4586 Series

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

Front-Loading Automatic Washer

Lavadora automdtica de carga frontal

Laveuse automatique _ chargement frontal

_!_!__ St_i.JCt O_S C_ __.......,..............,_ . ,,,

Models/Modelos/Modeles 110.4580#

# = color number, nQmero de color, numero de couleur

Designed to use only High

Efficiency detergent

Dise_ado para utilizar solamente

detergente de alta eficacia

Congu pour I'utilisation d'un

detergent haute efficacite

461970226771 Sears Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. www.sears.com

8182673 Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8 www.sears.ca

TABLEOF CONTENTS

PROTECTION AGREEMENTS ....................................................... 2

In the U.S.A ................................................................................... 2

In Canada ..................................................................................... 2

WARRANTY ..................................................................................... 3

PEDESTAL OPTION WARRANTY ................................................. 3

WASHER SAFETY ........................................................................... 4

INSTALLATION REQUIREMENTS ................................................ 5

Tools and Parts ............................................................................ 5

Options ......................................................................................... 5

Location Requirements ................................................................ 6

Drain System ................................................................................ 7

Electrical Requirements ................................................................ 8

INSTALLATION INSTRUCTIONS .................................................. 9

Remove Transport System ........................................................... 9

Connect the Inlet Hoses ............................................................... 9

Route the Drain Hose ................................................................ 10

Secure the Drain Hose .............................................................. 10

Level the Washer ....................................................................... 10

Complete Installation ................................................................. 11

FEATURES AND BENEFITS ....................................................... 11

WASHER USE .............................................................................. 12

Starting Your Washer ................................................................ 12

Using the Proper Detergent ...................................................... 12

Using the Dispenser .................................................................. 13

Pausing or Restarting ................................................................ 14

Changing Cycles, Options and Modifiers ................................. 14

Status Lights .............................................................................. 14

Cycles ........................................................................................ 15

Normal Sounds .......................................................................... 16

Options ...................................................................................... 16

Modifiers .................................................................................... 17

Laundry Guide ........................................................................... 17

LAUNDRY TIPS ............................................................................ 18

Loading ...................................................................................... 18

WASHER CARE ........................................................................... 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ...................................................................... 20

Vacation, Storage and Moving Care ......................................... 20

TROUBLESHOOTING .................................................................. 21

SERVICE NUMBERS ............................................... BACK COVER

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new

Kenmore ®product is designed and manufactured for years of

dependable operation. But like all products, it may require

preventive maintenance or repair from time to time. That's when

having a Master Protection Agreement can save you money and

aggravation.

Purchase a Master Protection Agreement now and protect

yourself from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of

your new product. Here's what's included in the Agreement:

v' Expert service by our 12,000 professional repair specialists

v' Unlimited service and no charge for parts and labor on all

covered repairs

v' "No-lemon" guarantee - replacement of your covered

product if four or more product failures occur within twelve

months

v' Product replacement if your covered product can't be fixed

v' Annual Preventive Maintenance Check at your request - no

extra charge

v' Fast help by phone - phone support from a Sears technician

on products requiring in-home repair, plus convenient repair

scheduling

v' Power surge protection against electrical damage due to

power fluctuations

v' Rental reimbursement if repair of your covered product takes

longer than promised

Once you purchase the Agreement, a simple phone call is all that

it takes for you to schedule service. You can call anytime day or

night, or schedule a service appointment online.

Sears has over 12,000 professional repair specialists, who have

access to over 4.5 million quality parts and accessories. That's

the kind of professionalism you can count on to help prolong the

life of your new purchase for years to come. Purchase your

Master Protection Agreement today!

Some limitations and exclusions apply. For prices and

additional information, call 1-800-827-6655.

Sears Installation Service

For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items, in the

U.S.A. call 1-800-4-MY-HOME ®.

n C_: ada

Maintenance Agreements

Your purchase has added value because you can depend on

Sears HomeCentraP for service. With over 2,400 Service

Technicians and more than a million parts and accessories, we

have the tools, parts, knowledge and skills to back our pledge:

We Service What We Sell.

Your Kenmore ®product is designed, manufactured and tested to

provide years of dependable operation. But like all products, it

may require service from time to time. The Sears Maintenance

Agreement offers you an outstanding service program, affordably

priced.

The Sears Maintenance Agreement

• Is your way to buy tomorrow's service at today's price

• Eliminates repair bills resulting from normal wear and tear

• Provides phone support from a Sears technician on products

requiring in-home repair

• Even if you don't need repairs, provides an annual Preventive

Maintenance Check, at your request, to ensure that your

product is in proper running condition.

Some limitations apply. For more information about Sears

Canada Maintenance Agreements, call 1-800-361-6665.

KENMORE ELITE WASHER

WARRANTY

Limited Lifetime Warranty on Stainless Steel Drum

For the lifetime of the washer from the date of purchase, Sears

will replace the Stainless Steel wash drum due to defective

material or workmanship. After the first year, you will be charged

for labor.

Limited 10-Year Warranty on Plastic Tub*

For the second through tenth year from the date of purchase,

Sears will replace the plastic tub if it is defective in material or

workmanship. After the first year, you will be charged for labor.

Limited 5-Year Warranty on Drive System Parts*

For the second through the fifth year from the date of purchase,

Sears will replace the following drive system parts if defective in

material or workmanship: drive pulley and drive belt. You will be

charged for labor after the first year.

Limited 2-Year Warranty on SENSOR SMART TM

Control Board

For two years from the date of purchase, Sears will replace the

SENSOR SMART: Mcontrol board if it is defective in material or

workmanship. You will be charged for labor after the first year.

Full 1-Year Warranty on Mechanical and Electrical Parts

For one year from the date of purchase, when this washer is

installed and operated according to the instructions that come

with it, Sears will repair or replace any of its mechanical or

electrical parts if they are defective in material or workmanship.

Service must be provided by a Sears Service Department in the

United States or Canada or an authorized agent.

Warranty Restriction

If this washer is operated for any purpose other than private

family use, all warranty coverage is restricted to 90 days from the

date of purchase.

Warranty Service

Warranty service is available by contacting the nearest Sears

Service Center in the United States or Canada. This warranty

applies only while the product is in use in the United States or

Canada.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state or province to

province.

For Sears warranty information or to contact a Sears Service

Center, please reference the service numbers located on the

back page of this manual.

Sears, Roebuck and Co.

D/817WA, Hoffman Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2B8

*In Canada a different warranty may apply.

Product Record

In the space below, record your complete model number, serial

number, and purchase date. You can find this information on the

model and serial number label.

Have this information available to help you quickly obtain

assistance or service when you contact Sears concerning your

appliance.

Model number 110.

Serial number

Purchase date

Inlet Hose replacement date

Replace inlet hoses after 5 years of use to reduce the risk of hose fail-

ure.

Save these instructions and your sales receipt for future

reference.

PEDESTALOPTION

WARRANTY

Full One-Year Warranty on Mechanical Parts

For one year from the date of purchase, supplier will repair or

replace any of its mechanical parts if defective in material or

workmanship. This Pedestal must be installed with this washer

according to the instructions provided in the Pedestal Installation

Instructions.

Warranty Restriction

If the pedestal is subject to other than private family use and or if

the pedestal is used with any other product than those listed in

the installation instructions, the above warranty coverage is null

and void.

Product Record

In the space below, record your complete model number, serial

number, and purchase date. You can find this information on the

model and serial number label.

Have this information available to help you quickly obtain

assistance or service when you contact Sears concerning your

pedestal.

Model number 110.

Serial number

Purchase date

Save these instructions and your sales receipt for future

reference.

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured ifyou don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[] Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

[] Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation.

The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 19_6"[39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrench 17 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape

Parts supplied

A B

Pedestal

You have the option of purchasing pedestals of different heights

separately for this washer. You may select a 13" (33 cm) or a

15.5" (39.4 cm) pedestal. Remember that the pedestal will add to

the total height of the unit.

A. Drain hose form

B. Inlet hose (2)

C. Inlet hose washer (4)

D. Transport bolt hole plug (4)

E. Beaded strap

Alternate Parts

Parts listed are available from your local Sears store or Sears

Service Center. For further information, please call

1-800-4-MY-HOM E®(1-800-469-4663).

If You Have You Will Need to Buy

Laundry tub or

standpipe taller

than 96" (2.4 m)

Sump pump system (if not already

available)

Overhead sewer

Standard 20 gal. (76 L), 30" (76.2 cm)

tall drain tub or utility sink and sump

pump (available from local plumbing

suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose Part

Number 8318155; and connector kit,

Part Number 285835

Drain hose too 4 ft (1.2 m) drain hose extension kit,

short Part Number 285863

Water faucets 2 longer water fill hoses:

beyond reach of 6 ft (1.8 m) Part Number 76314,

fill hoses 10 ft (3.0 m) Part Number 350008

Optional pedestal

This pedestal (with storage drawer) is available in several colors.

To order, call your local Sears store. For further information,

please call 1-800-4-MY-HOME ®(1-800-469-4663).

Pedestal Approximate Color Part

Height Height with Number

Washer

13" (33 cm) 51" (130 cm) White 42842

13" (33 cm) 51" (130 cm) Bisque 42844

13" (33 cm) 51" (130 cm) Graphite 42846

15.5" (39.4 cm) 53" (135 cm) White 55842

15.5" (39.4 cm} 53" (135 cm) Bisque 55844

15.5" (39.4 cm) 53" (135 cm) Graphite 55846

15.5" (39.4 cm) 53" (135 cm) Pacific Blue 55847

15.5" (39.4 cm} 53" (135 cm) Champagne 55848

15.5" (39.4 cm) 53" (135 cm) Sedona 55849

Stack Kit

Are you planning to stack your Kenmore washer and dryer? To do

so, find the stack kit (8541503) in the drum of the matching

Kenmore dryer. Follow instructions included with the kit. See

"Location Requirements."

Selecting the proper location for your washer improves

performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a

basement, laundry room, closet, or recessed area. See "Drain

System."

Companion appliance location requirements should also be

considered. Proper installation is your responsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the

washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of

where the power cord is attached to the back of the washer.

See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the

hot and cold water fill valves, and water pressure of

20-100 psi (137.9-689.6 kPa).

A level floor with a maximum slope of 1" (2.5 cm) under

entire washer. Installing the washer on soft floor surfaces,

such as carpets or surfaces with foam backing, is not

recommended.

• A sturdy and solid floor to support the washer with a total

weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C).

Some water can remain in the washer and can cause damage in

low temperatures.

Installation clearances

• The location must be large enough to allow the washer door

to be fully opened.

• Additional spacing should be considered for ease of

installation and servicing.

• Additional clearances might be required for wall, door, and

floor moldings.

• Additional spacing of 1" (2.5 cm) on all sides of the washer is

recommended to reduce noise transfer.

• Companion appliance spacing should also be considered.

Washer Dimensions

50W'

(128.3crn)

Recommended installation spacing for custom

undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

39"rain.

(99.0cm)

(2.5 cm) (68.6 crn) (2.5 crn)

Recommended installation spacing for recessed or

closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

84"'

(86.4 cm)

_...,, _-

48 in?*-; _-

(310cm2)

34in,2' =

(150crn2)

I1" I_- 31_/="_1 4"1_-

(2.5 cm) (80 cm) (10.2 crn)

(7.6cm)

(7.0cm)

A. Side view - closet or confined area

B. Closet door with vents

*Min. top and bottom air openings for closet door.

Recessed or closet installation - Washer on pedestal

1" --_- ,(-_ 27" ---_ _-- 1"

(2.5 cm) (68.6 cm) (2.5 cm)

18"min,_

L_ (45.7crn)

I1"I_-31W'_'14"1

(2.5 cm) (00crn) (10.2 crn)

A. Recessed area

B. Side view - closet or confined area

31W'

(80.0ore)

Recommended installation spacing for recessed or

closet installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 in.2*

(310cm2)

24in} *

(156cm2)

9½"**

(14cm)

3" (7.6cm)

3" (7.6 cm)

-_ crn)

6" (1;2 cm)

76"

(193cm)

(2.6 cm)

\_ :-y

27" -_- _ 1"***

69.6 cm 2.5 cm

openings in the top are required.

1179c 1 ' 179 r.1

4 31_/2 1

*Min. top and bottom air openings for closet door.

**External exhaust elbow requires additional space.

***Wall, door and floor molding may require

additional spacing.

Recommended installation spacing for cabinet

installation

The dimensions shown are for the recommended spacing.

For cabinet installation, with a door, the minimum ventilation

-- r (22.9 crn)

(1O,2crn) (80,Ocm) (2.5cm) (2.5cm) (68,6cm) (2.5cm)

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain

system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than

17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and

no higher than 96" (2.4 m) from the bottom of the washer.

30"rain.

(76.2 cm)

Laundry tub drain system (view A)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (76.2 cm) above the floor.

Floor drain system (view 13)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failureto follow these instructions can result in death_

fire, or electrical shock.

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical

supply is required. A time-delay fuse or circuit breaker is

recommended. It is recommended that a separate circuit

serving only this appliance be provided.

This washer is equipped with a power supply cord having a

3 prong grounding plug.

To minimize possible shock hazard, the cord must be

plugged into a mating, 3 prong, grounding-type outlet,

grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility

and obligation of the customer to have the properly grounded

outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is

recommended that a qualified electrician determine that the

ground path is adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not sure the

washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

For a grounded, cord=connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the unit is

within approximately 3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the

suspension system during transportation. These bolts also retain

the power cord inside the washer until the bolts are removed,

Using a 13 mm wrench, loosen each of the bolts.

Once the bolt is loose, move it to the center of the hole and

completely pull out the bolt, including the plastic spacer

covering the bolt.

3. Once all 4 bolts are removed, discard the bolts and spacers,

Then pull the power cord through the opening of the rear

panel and close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your

local service center. To avoid suspension and structural damage

to your washer, it must be properly set up for relocation by a

certified technician.

Connect the net ossxs

Make sure the washer drum is empty.

1. Attach the hose with the red color indicator to the Hot (left)

inlet valve. Attaching the red coupling first makes it easier to

tighten connection with pliers. Screw on coupling by hand

until it is seated on the washer.

2. Attach the hose with the blue color indicator to the Cold

(right) water inlet valve. Screw on coupling by hand until it is

seated on the washer.

Using pliers, check the tightness of the hose couplings

already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can

result.

4. Attach the hose with the red color indicator to the hot water

faucet. Screw on coupling by hand until it is seated on the

washer.

5. Attach the hose with the blue color indicator to the cold water

faucet. Screw on coupling by hand until it is seated on the

washer.

Using pliers, tighten the couplings with an additional

two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can

result.

Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement

dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,

wear, or leaks are found.

Properroutingofthedrainhoseprotectsyourfloorsfrom

damageduetowaterleakage.Readandfollowthese

instructions.

Remove drain hose from washer cabinet

Gently pull the corrugated drain hose from the shipping clips.

Drape the power cord over the washer top.

Secure the drain hose to the laundry tub leg or standpipe with

the beaded strap provided. (See illustrations A and B.)

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A B

A. Snap either end of the drain hose form to the drain hose at

the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess

drain hose into standpipe. Hose should be secure, but loose

enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and

Parts."

If the washer faucets and the drain standpipe are recessed

(see illustration C), put the hooked end of the drain hose in

the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Leve/4i e J}Jsst @ "

ProperJy leveling your washer avoids excessive noise and

vibration.

1. Check the levelness of the washer by placing a level on the

top edge of the washer, first side to side, then front to back.

If the washer is against a wall, move the washer out slightly

before tipping back. If the washer is not level, first prop the

front with a wood block and adjust the feet as necessary;

then prop the back and adjust feet as necessary. Repeat this

step until washer is level.

Make sure that all four feet are stable and resting on the floor.

Then check that the appliance is perfectly level (use a level).

After the washer is level, use a 17 mm open-end wrench to

turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All 4 feet must be tightened. If the nuts are not

tight against the washer cabinet, the washer may vibrate.

When you are pushing on the edges of the washing machine

top plate, the machine should not move front to back, side to

side, or diagonally.

Slide the washer to its final location.

Confirm the levelness of the washer.

1. Check the electrical requirements. Be sure that you have the

correct electrical supply and the recommended grounding

method, See "Electrical Requirements."

2. Be sure all parts are now installed, Ifthere is an extra part, go

back through the steps to see which step was skipped.

3. Be sure you have all of your tools.

4. Dispose of or recycle all packaging materials.

5. Be sure the water faucets are on,

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

Totest and to clean your washer, measure _/2the

manufacturer's recommended amount of powdered or liquid

High Efficiency (HE) detergent for a medium size load. Pour

the detergent into the detergent dispenser. Select NORMAL/

CASUAL, and then select START.Allow the washer to

complete one whole cycle.

Use only HE High Efficiency detergent.

FEATURESAND BENEFITS

SENSOR SMART TM Electronic Controls

Flexible electronic controls are easy to use whether you are a

beginner or an expert.

Smart Dispensers

The smart dispensers make your washer truly automatic. This

washer provides a three-compartment dispenser which includes

separate compartments for detergent, fabric softener, and

bleach. The dispenser has large pour zones, is self-cleaning, and

can be easily removed. Laundry products are diluted with fresh

water and added to the load at the proper time in the wash cycle.

Auto Water Level

Adjusting to the size of the load, this feature allows the washer to

use the minimal amount of water needed to clean and rinse the

clothes. With a low water level, you can obtain the same results

with smaller amounts of additives. Because only the required

amount of water is used, the washer saves energy, too.

CATALYS'F _Cleaning Action with Direct Injection

A concentrated detergent solution is sprayed onto the clothes at

the beginning of the cycle to ensure that the detergent comes

into contact with the clothes as quickly as possible, removing

stains from your clothes without pretreating.

Larger Load Size

Since there is no agitator, you can wash larger, bulkier items such

as an average size sleeping bag. You are also able to wash more

clothes at one time, which means fewer loads. You can wash a

pillow or a large stuffed teddy bear.

Suspension System

To reduce washer "walk" and "off-balance" conditions, your new

washer combines:

• 2 Springs to isolate vibration

• 4 Shock absorbers at the washer base to minimize movement

Stainless Steel Drum

The stainless steel drum eliminates corrosion and enables higher

spin speeds for more water extraction, reducing drying time.

Adaptive Variable Speed Motor

The motor adapts to the load size and to the cycle selected to

give optimum cleaning, rinsing, and spinning conditions. The

motor can handle slow speeds needed for wool and delicate

items and is powerful enough to drive a large clothes load into a

1,050 rpm spin.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with

fewer, larger loads, conserves resources and lowers your water

and energy bills too.

Spin Speeds

This washer automatically selects the spin speed based on the

cycle selected. This factory setting can be changed, however.

This washer offers up to five different spin speed choices.

Automatic Temperature Control (ATC)

ATC electronically senses and maintains a uniform water

temperature. ATC regulates incoming hot and cold water. The

ATC is automatically turned On when a cycle is selected.

Add A Garment

When this option is available at the beginning of the cycle the

Add A Garment status light will glow for the first 8 minutes. This

washer allows an 8-minute period in which forgotten garments

may be added to a load.

Dynamic Balance

A precision balancing system that allows the washer to reach

spin speeds of up to 1,050 rpm. The washer spins faster so that

clothes coming out of the washer will dry faster. In addition, if the

Dynamic Balance system detects off balance loads during

spinning, it redistributes the clothes so that they are evenly

balanced.

WASHER USE

WASH CYCLES

E !l_A]l

CUSTOM I_i _[!_lr I_ MODIFIERS

HEAVY NORMAL /

£DAG:_r_E@'al/s e f'@'__Jy'@'_ DUTY_ /_ CASUAL

_ j/ _TART) / )} @ HEAVY @ HOT / COLD @ MEDIUM

_1 @ RINSE& SPIN WHITEST - DELICATE / @LIGHT PREWASN @WARM/ WARM @LOW

_ j HANDWASH

coi Q_ ® DRAIN & SPiN • WARM / COLD @EXTRA LOW @2NO RINSE

C(MROLLO_,_ O SLC _DS e o(r SOIL LEVEL EXTENDED SPIN @COLD/COLD ®NO SPIN @ NORMAL RINSE

Jr oK OM_L EXPRESSWASH

END of CYCLE WATER TEMP SPiN SPEED RINSE

LJN_OCK DOOR SIGNAL ,v,,s! i!r_SE OPTIONS

o_ /0

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammabme fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

The following is a guide to using your washer. Please refer to

other sections of this manual for more detailed information.

Do not store laundry products on the top surface of this washer.

Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type of

detergent will be marked "HE" or "High Efficiency." This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the

manufacturer's instructions to determine the amount of detergent

to use.

Use only "HE" High Efficiency detergent.

First Wash Cycle Without Laundry

Before washing clothes for the first time, choose the Normal/

Casual cycle and run it without clothes. Use Y2the manufacturer's

recommended amount of powdered or liquid High Efficiency (HE)

detergent for a medium size load. This initial cycle serves to

ensure the interior is clean before washing clothes.

1. To load the washer

Open the washer door by pulling on the handle. Sort laundry

according to color and type of fabric. Place a load of sorted

clothes in the washer. Do not overload washer. Overloading

can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

• Mix large and small items. Avoid washing a single item.

Load evenly.

• Wash small items such as infant socks in mesh garment

bags. It is recommended that more than one garment bag

be used and that each garment bag be filled with equal

amounts of material.

• When unloading garments, occasionally check under the

rubber rim at the front of the tub for small items.

Close the washer door by pushing it firmly until the lock

clicks. The washer door will remain locked during the wash

cycle.

NOTE: After any wash cycle is completed, the door must be

opened and then closed before a new cycle can begin. The

door can be opened only if PAUSE/CANCEL is selected while

the ADD A GARMENT light is glowing or if the cycle has been

canceled. See "To cancel a cycle" in the "Changing Cycles,

Options and Modifiers" section.

3. Open the dispenser drawer and add laundry products to the

detergent, bleach, or fabric softener compartments. Close

drawer slowly to avoid spills. See "Using the Dispenser."

4. Turn on the washer by selecting one of the WASH CYCLES.

The indicator light for the selected cycle will glow. When

selecting a Wash Cycle, the preset options, Water Temp, Spin

Speed, and Soil Level for the selected cycle will glow. The

display shows the estimated time remaining. The preset

settings provide the recommended fabric care for the

selected cycle. See "Cycles."

5. Select the desired OPTIONS. Not all Options are available

with all cycles. See "Options."

6. Select the desired MODIFIERS. Not all Modifiers are available

with all Cycles and Options. See "Modifiers."

If desired, select the END OF CYCLE SIGNAL. The signal is

helpful when you are washing items that should be removed

from the washer as soon as it stops. Select ON or OFR

To begin the wash cycle immediately

Select and hold START (for approximately 1 second).

• If you do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off.

• When the wash cycle is complete, the CLOTHES CLEAN

status light glows, the door unlocks, and the wash load

can be removed from the washer. The washer powers

down automatically 5 minutes after the cycle is complete

and the CLOTHES CLEAN light goes off. To power down

the washer manually after the wash cycle is complete,

select PAUSE/CANCEL once.

To begin the wash cycle later

Select DELAY until the desired delay time (in hours) shows in

the Estimated Time Remaining display. Select START.The

countdown to the wash cycle will show in the display window.

• When delaying a cycle, use only powdered detergents in

the main wash compartment since liquid detergents may

seep out of the compartment during Delay, before the

wash cycle begins.

Your new washer has a dispenser drawer with three separate

compartments for your laundry products--one is for detergent,

one is for liquid chlorine bleach, and one is for liquid fabric

softener. Laundry products are diluted and dispensed

automatically at the proper time during the wash cycle, making it

unnecessary for you to return to the washer during the cycle to

add them.

It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Do not put laundry additives directly into the wash tub. Always

use the proper dispensers when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of •

detergent will be marked "HE" or "High Efficiency." This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result •

in washer errors, longer cycle times and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the •

manufacturer's instructions to determine the amount of detergent

to use.

Use only "HE" High Efficiency detergenL

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry additive to the proper compartment.

Push in the dispenser drawer slowly and completely (to avoid

a spill).

Dispenser

A. Dispenser release lever

B. Separator

C. Main Wash detergent compartment

D. Liquid chlorine bleach compartment

E.Fabric softener compartment

Main Wash detergent compartment

(Letter C in Dispenser Illustration)

Add liquid or powdered HE detergent to this compartment for

your wash cycle. The detergent separator must always be in

place, either in the front or back position.

• Delaying a cycle: Use only powdered detergents. Powdered

detergents will remain in the dispenser until the cycle begins,

but liquid detergents may seep out of the compartment

during the delayed time.

Do not fill beyond the "MAX" level. Use detergent

manufacturer's recommended amount for load size.

Liquid or powdered color-safe bleach may be added to the

Main Wash compartment along with the same type of

detergent, liquid or powdered.

Liquid detergent: Put the separator in the front position,

between the guides, as shown following. There will be no gap

between the bottom of the wash cycle detergent

compartment and the bottom of the separator.

[] POWDER

LNQUI

Separator in front position, between guides

A. Separator

B. Guide

Powdered detergent: Put the separator in the back position,

behind the guides, as shown following. There will be a gap

between the bottom of the wash cycle detergent

compartment and the bottom of the separator.

A!!lpowDER

B .............................__

Separator in back position, behind guides

A.Separator

B.Guide

LIQU

NOTE: The separator will be in the powder (back) position when

shipped from the factory.

Chlorine bleach compartment

(Letter D in Dispenser Illustration)

Add no more than 1/3cup (80 mL) liquid chlorine bleach to this

compartment. The bleach will be automatically diluted and

dispensed at the best time during the first rinse after the wash

cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

• Do not fill beyond the "MAX" level.

NOTE: Overfilling could cause severe garment damage.

Fabric Softener compartment

(Letter E in Dispenser Illustration)

Add 1Acup (60 mL) liquid fabric softener to this compartment.

Fabric softener will be automatically dispensed in the final rinse.

• Do not fill beyond the "MAX" level.

1. To pause the washer at any time, select PAUSE/CANCEL

2. To continue the cycle, select and hold START (for

approximately 1 second).

Not all Options and Modifiers are available with all Cycles.

Cycles, Options and Modifiers can be changed anytime before

START is selected.

Options and Modifiers can be changed anytime after START is

selected and before the start of the selected Option or Modifier.

To cancel a cycle and select a new cycle

1. Select PAUSE/CANCEL twice.

2. Select desired cycle.

3. Select the desired OPTIONS and MODIFIERS.

4. Select and hold START (for approximately I second) to restart

the washer at the beginning of the new cycle.

To cancel a cycle

1. Select PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can

be removed.

NOTE: If the water level or the temperature is too high, the

washer will drain automatically before the door unlocks.

To change Options and Modifiers after the cycle has started

1. Select PAUSE/CANCEL.

2. Select the desired OPTIONS or MODIFIERS.

3. Select and hold START (for approximately 1 second) to

continue the cycle.

To drain the washer manually

1. Select PAUSE/CANCEL

2. Select DRAIN & SPIN.

3. Select and hold START (for approximately 1 second) to begin

the drain.

4. When the spin is complete, the door unlocks. Items can be

removed from the washer.

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

STATUS

ADD AGARMENTQ

PREWASHO

WASH •

RINSE0

SaHO

CLOTHESCLFAH•

CONTROLlOCKED

DOORLOCKFD•

Adding items

You can add items to the washer after the cycle has started for

Normal/Casual, Heavy Duty or Whitest Whites if the ADD A

GARMENT status light is glowing.

To add items

1. Select PAUSE/CANCEL The washer door unlocks, and items

can be added.

2. To continue the cycle, close the door and select and hold

START (for approximately 1 second).

3. To unlock the door after the Add A Garment period, press

Pause/Canel twice. This will cancel the Wash Cycle.

Clothes Clean

The Clothes Clean light stays on for 5 minutes after the cycle is

complete. The washer will then power down.

Locking controls

The Control Lock prevents unintended use of the washer. You

can also use the control lock feature to prevent unintended cycle

or option changes during a cycle. When CONTROL LOCKED is

lit, all buttons are disabled except for Pause/Cancel and Start.

You can lock the controls while the washer is operating.

To lock the controls

Select and hold DRAIN & SPIN for 3 seconds.

DRAIN& SPiN

PRESS& HOlD 3

SECONDS [00CK /

UNLOCK CONTROl

The CONTROL LOCKED status light glows.

To unlock the controls

Select and hold DRAIN & SPIN for 3 seconds until the CONTROL

LOCKED Status light turns off.

Door Lock

Whenthe DOOR LOCKEDstatus light glows, the door is locked.

Estimated Time Remaining

The cycle times vary automatically based on your water pressure,

water temperature, detergent, and clothes load. The cycle time

will be extended if oversudsing occurs or the load is unbalanced.

The SUDs routine removes extra suds and assures proper rinsing

of your garments. During the unbalance routine the time

displayed may pause until this activity is complete, then resume

with the remainder of the cycle.

Wash Cycles

Choose Wash Cycles by selecting the button next to the desired

cycle. Each cycle is designed for different types of fabric and soil

levels.

WASH CYCLES

HEAVY_ NORMAL /

,: "%CASOAL

/¢ %.-,..- ,\

___qOLD/,, PRESS _ 4OLD ,/

,\ ...........

WHITES _e_ HANDWASH

EXPRESSWASH

Each cycle has a preset Soil Level (cycle time), Water

Temperature, and Spin Speed and may have preset Options.

The preset settings provide the recommended fabric care for

the selected cycle.

The preset settings can be changed anytime before START is

selected. Not all Options and Modifiers are available with all

cycles. To change settings after the cycle has started, select

PAUSE/CANCEL then select the desired settings. Select and

hold START (for approximately 1 second) to continue the

cycle.

Preset cycle settings

Each cycle has a preset Cycle Time, Water Temperature, and

Spin Speed. The preset settings provide the recommended fabric

care for the selected cycle. See chart.

Cycle Soil Level Water Temp Spin Speed

(hr:min)

Whitest Whites Heavy Hot/Cold High

(1:10)

Heavy Duty Heavy Hot/Cold High

(1:05)

Normal/Casual Normal Warm/Cold High

(o:45)

Delicate/ Normal Cold/Cold Extra-Low

Handwash (0:35)

Express Wash Light Warm/Cold High

(2-3 items) (0:30)

Rinse & Spin Normal Cold/Cold High

(0:21)

Drain & Spin Normal N/A High

(0:11)

Whitest Whites

This cycle is especially designed for cleaning loads of soiled

white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse

provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer

wash time, and high-speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and

heavily soiled garments. This cycle combines

fast-speed tumbling, longer wash time, and high-speed spin to

shorten drying times.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press

blends, cottons and linens, and synthetic fabrics. This cycle

combines medium-speed tumbling, high-speed spin, and a load

cooling process to reduce wrinkling.

Delicate/Handwash

Use this cycle to clean delicate and special care garments.

(Check label instructions to make sure that the garment is

washable.) Similar to the way garments are hand washed in a

sink, the wash action of this cycle combines periods of extra low

tumbling speeds and soaking. Low spin speeds minimize

wrinkling.

• Use mesh garment bags to wash undergarments such as

underwire bras, items with strings, and small items such as

socks.

Express Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments

that are needed in a hurry. This cycle combines fast-speed

tumbling, a shortened wash time, and extra high speed spin to

shorten drying time. Large wash loads will result in the machine

increasing the wash time.

Extra Cycles

Select the button for the desired cycle.

CUSTOM

PROGRAM

PRSS & HOLD 3 SEC.

RINSE& SPiN

DRAIN& SPiN

As with any new product, you will hear sounds that you are not

accustomed to. You may hear various sounds when the door is

locked and unlocked and during the washing, rinsing, and

spinning process. Between changes in wash actions, there will

be momentary pauses. You will hear water spraying and

splashing during the wash and rinse cycles. These new sounds

and pauses are part of normal washer operation. See

"Troubleshooting."

You can customize your wash by adding options to your cycle

selections. You can add or change an option after starting a cycle

anytime before the selected option begins. Not all Options are

available with all cycles.

OPTIONS

PREWASH

You can change the selection anytime before START is selected.

Custom Program

Custom Program allows you to store a customized wash cycle for

future use.

To Customize a Wash Cycle:

1. Select a cycle.

2. Select the desired OPTIONS. •

3. Select the desired MODIFIERS.

4. To record the cycle, press and hold Custom Program •

(approximately 3 seconds) until a beep sounds. The Custom

Program cycle is now stored for future use.

5. Press START. •

6. To reuse this cycle at another time, select CUSTOM

PROGRAM and press START. •

Rinse & Spin

Use this cycle to get a rinse and spin only. This cycle combines

fast-speed tumbling and high-speed spin. If desired, you can

reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

Rinse & Spin is useful for

• Loads that need rinsing only.

• Adding fabric softener to a load using the fabric softener

dispenser.

Drain & Spin

Use this cycle to drain your washer or to drain and spin your

wash load. The spin speed is preset to high. If desired, you can

reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and

woolens should be drained with no spin or low spin to avoid

fabric stress.

EXTENDEDSPIN

ENDef CYCLE

SIGNAL

ON / OFF

See the "Laundry Guide" section for an overview of possible

options for each Wash Cycle selection.

You can select more than one option for a cycle. Some

options cannot be added to some cycles.

If an option is available with a selected cycle, the light for that

option will glow when selected.

If an option is unavailable with a selected cycle, there will be a

short tone, and the light for that option will not glow when

selected.

Prewash

Use this option for loads of heavily soiled garments that need

pretreatment.

• Add detergent to the Main Wash Compartment of the

dispenser drawer.

• Use powdered detergent to avoid laundry additives from pre-

dispensing into the wash system.

This option adds tumbling time prior to the selected main cycle.

The washer continues automatically from prewash into the main

wash cycle.

Extended Spin

Use this option to add an additional spin to any cycle to improve

drying times for some heavy fabrics or special-care items by

reducing excess water, which may save energy.

End of Cycle Signal

This signal is helpful when you are removing items from the

washer as soon as it stops. Select ON or OFF.

Preset cycle settings of Wash/Rinse Temp, Spin Speed, and Soil

Level can be changed. You can change a modifier after starting a

cycle anytime before the selected modifier begins. Not all

Modifiers are available with all options and cycles.

MODIFIERS

Auto [FMr_COS_TRO! e HIGH

o HOT / COLD O MEDIUM

O WARM / WARM • LOW

O WARM / COLD ®EXTRA LOW

0 COLD / COLD oNo SPiN

(2) C)

WATER TEMP SPiN SPEED

WASH i RINSE

0 2ND RINSE

• NORMAL RINSE

RINSE

OPTIONS

To change the water temperature, select the WATER TEMP

button until the desired setting glows.

To change the spin speed, select the SPIN SPEED button

until the desired setting glows.

• HEAVY

• NORMAL

• LIGHT

SOILLEVEL

• To change cycle time, select SOIL LEVEL button.

Normal Rinse

This consists of a two phase rinsing process that is effective for

everyday laundry.

2nd Rinse

A second rinse can be used to aid in the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as the first rinse. This is

the default rinse setting for the Whitest Whites cycle.

Wash/Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

Warm rinses leave the loads drier than cold rinses. Warm rinses

increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses save energy.

Temperature Guide

Wash Water Temperature Suggested Fabrics

HOT Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

Light soils

In wash water temperatures colder than 60°F (15.6°C), detergents

do not dissolve well. Soils may be difficult to remove.

Auto Temp Control

ATC (Auto Temp Control) electronically senses and maintains a

uniform water temperature. ATC regulates incoming hot and cold

water. The ATC is automatically turned On when a cycle is

selected. See "Preset Cycle Settings" in "Cycles."

• ATC ensures consistent cleaning.

• ATC works for the wash temperature with Hot/Cold, Warm/

Warm, Warm/Cold, and Cold/Cold settings.

• ATC works for the Warm rinse setting by regulating the water

temperature at approximately 104°F (40°C).

• The Cold rinse temperatures depend on the cold water at

your faucet.

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available within each of

these washer cycles.

CYCLE SUGGESTED LOAD TYPE PREWASH RINSE EXTENDED SPIN

OPTIONS

Whitest Whites Soiled white fabrics v' v' v'

Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of v' v' v'

cotton

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of v' v' v'

polyester, nylon, cotton, linen, or cotton blends

Delicate/Nandwash Fabrics made of silk, special-care items marked as v'

"Handwashable"

Express Wash Small loads of 2-3 lightly-soiled cotton, polyester, v' v'

nylon and cotton blends.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of

your garments.

• Use only High Efficiency detergents. The package for this type

of detergent will be marked "HE" or "High Efficiency." This

wash system, along with less water, will create too much

sudsing with a regular non-HE detergent, Using regular

detergent will likely result in washer errors, longer cycle times

and reduced rinsing performance, It may also result in

component failures and noticeable mold or mildew. HE

detergents are made to produce the right amount of suds for

the best performance, Follow the manufacturer's instructions

to determine the amount of detergent to use.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if

they would normally be washed together. Separate lint-givers

(towels, chenille) from lint-takers (corduroy, synthetics,

permanent press). When possible, turn lint-givers inside-out.

• Separate dark colors from light colors, colorfast items from

noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate

items).

Unloading

• Remove clothes from washer after the cycle is completed.

Metal objects such as zippers, snaps, and buckles may rust if

left in the washer basket for a long time.

• When unloading garments, occasionally check under the

rubber rim at the front of the tub for small items.

Useonly HE High Efficiency detergent.

• Close zippers, snaps, and hooks to avoid snagging other

items. Remove pins, buckles, and other hard objects to avoid

scratching the washer interior. Remove non-washable trim

and ornaments.

• Empty pockets and turn them inside-out.

• Turn down cuffs; brush away lint and dirt.

• Turn synthetic knits inside-out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best

results.

• Mix large and small items, avoid washing single items, and

load evenly.

• Wash small items, such as infant socks, in a mesh garment

bags. To create a balanced load it is recommend that more

than one garment bag be used, and that each garment bag

be filled with equal amounts of material.

NOTE: If washing only small items, it is recommend that more

than one mesh garment bag be used, and that each garment

bag be filled with equal amounts of material.

Loading suggestions (maximum size loads)

Heavy Work Clothes

4 jeans 2 sweatpants

4 workpants 2 sweatshirts

4 workshirts

Towels

10 bath towels

10 hand towels

14 washcloths

Mixed Load

3 sheets (1 king, 2 twin) 9 T-shirts

4 pillowcases 9 shorts

3 shirts 10 handkerchiefs

3 blouses

Delicates

3 camisoles 2 bras

4 slips 2 nighties

4 panties

WASHER CARE

Cleaning the door seal/bellow

1. Open the washer door and remove any clothing or items from

the washer.

2. Inspect the gray colored seal/bellow between the door

opening and the basket for stained areas. Pull back the seal/

bellow to inspect all areas under the seal/bellow and to check

for foreign objects.

A. Seal/Bellow

3. If stained areas are found, wipe down these areas of the seal/

bellows, using the procedure that follows.

a} Mix a dilute solution, using 3/4cup (177.4 mL) of liquid

chlorine bleach, and 1 gal. (3.8 L) of warm tap water.

b} Wipe the seal/bellow area with the dilute solution, using a

damp cloth.

c} Let stand 5 minutes.

d) Wipe down area thoroughly with a dry cloth and let the

washer interior air dry with door open.

IMPORTANT:

• Wear rubber gloves when cleaning for prolonged periods.

• Refer to the bleach manufacturer's instructions for proper

use.

Washer Monthly Maintenance Procedure

Your washer has a special cycle stored within the machine's

programming. Pressing a specific combination of buttons will

access this cleaning cycle. This cycle uses higher water volumes

in combination with liquid chlorine bleach to thoroughly clean the

inside of your washing machine.

NOTES:

• Read these instructions completely before beginning the

cleaning process.

If necessary, the cleaning cycle may be interrupted by

pressing the PAUSE/CANCEL button. However, this will not

immediately stop the cycle. The machine will display "int"

(interrupt) and continue with several rinse and drain steps to

ensure that all remaining bleach is rinsed from the unit.

Begin procedure

1. Open the washer door and remove any clothing or items from

the washer.

2. Be sure the door is closed.

3. Open the dispenser drawer and remove the detergent divider

from the Main Wash detergent compartment and set aside.

See "Using the Dispenser" for instructions. No laundry

products will be added at this time; you will be required to

add only liquid chlorine bleach, at a later step.

4. To enter the cycle, a specific combination of buttons must be

pressed.

• Select the RINSE & SPIN button.

• Select Low SPIN SPEED.

• Select Warm/Cold WATER TEMPERATURE.

• Select the 2ND RINSE Option.

• Push END of CYCLE SIGNAL button 4 times within

5 seconds to start the cycle. The door will lock, and filling

will begin.

NOTE: The water in the unit will dispense for a moment,

then the door will unlock, lock again, and then the cycle

will continue.

• The machine will fill and run a short sensing cycle. This

will take approximately 3 minutes.

The washer will provide 4 short tones. Check the Estimated

Time Remaining display for the codes indicated below.

a} If the washer displays the letters "Ab" (Add Bleach) inthe

Estimated Time Remaining display, you will hear 4 short

tones. Proceed to Step 6.

b} If the washer displays the letters "rL" (Remove Load) in

the Estimated Time Remaining display, an error tone will

sound. The door will unlock.

• Open the door and remove the items from the washer.

• Continue the cycle by pressing the START button.

NOTE: The water in the unit will dispense for a

moment, then the door will unlock, lock again, and

then the cycle will continue with another check for

items in the washer.

• The machine will fill and run a short cycle to

determine whether any items have been left in the

washer. This will take approximately 3 minutes.

• The washer will repeat Step 5 until it can determine

that there are no items in the washer and will display

"Ab" (Add Bleach).

Add liquid chlorine bleach.

a} If using the maintenance procedure for the first time, open

the dispenser drawer and immediately add 1 cup

(236.6 mL) liquid chlorine bleach to the Main Wash

detergent compartment. The liquid chlorine bleach should

immediately flow out of the dispenser.

b} If doing a monthly maintenance procedure, open the

dispenser drawer and immediately add 1/3cup (78.8 mL)

liquid chlorine bleach to the Main Wash detergent

compartment. The liquid chlorine bleach should

immediately flow out of the dispenser.

NOTES:

• Water will be flowing into the dispenser drawer when

the bleach is added. This is normal.

• Do not add any detergent to this cleaning cycle. Use

of more than 1 cup (236.6 mL) of bleach will cause

product damage over time.

7. Once the cleaning cycle has begun, allow the cycle to

complete. An estimated cycle time will appear on the display.

8. After the cleaning cycle is complete, leave the door open,

slightly, to allow for better ventilation and drying of washer

interior.

9. Replace the detergent compartment divider.

Always do the following to maintain washer freshness

• Use only HEHigh Efficiency detergent.

• Leave the door slightly open after each cycle to allow for

better ventilation and drying of washer interior.

• Run this procedure on a monthly basis using 1/3cup (78.8 mL)

of liquid chlorine bleach.

• If the procedure does not sufficiently improve the machine

freshness, evaluate your installation and usage conditions for

other causes.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills.

Occasionally wipe the outside of your washer to keep it looking

new. Use mild soap and water. Do not use abrasive products.

Cleaning the dispenser drawer

The dispenser drawer is removable for easy cleaning.

1. Unlock the dispenser drawer by pressing the Release Lever in

the Prewash compartment. See "Using the Dispenser."

Remove the drawer.

2. Remove the inserts (the siphon from the softener and bleach

compartments and the separator).

3. Wash the parts under running water.

4. Replace the inserts and return the dispenser to the drawer.

Replace inlet hoses after five years of use to reduce the risk of

hose failure. Periodically inspect and replace inlet hoses if

bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Install and store your washer where it will not freeze. Because

some water may stay in the hoses, freezing can damage your

washer. If storing or moving your washer during freezing weather,

winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on

vacation or not using your washer for an extended period of time,

you should:

• Unplug washer or disconnect power.

• Turn off the water supply to the washer. This helps avoid

unintended flooding (due to a water pressure surge) while you

are away.

• Slightly open door to provide ventilation.

To winterize washer:

1. Put I qt (1 L) of R.V.-type antifreeze in the drum.

2. Run washer on a Drain & Spin cycle.

3. Unplug washer or disconnect power.

4. Shut off both water faucets.

5. Disconnect water inlet hoses from faucets and drain.

To use washer again:

1. Flush water pipes. Reconnect water inlet hoses to faucets.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord,

Falure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run the washer through the Normal/Casual cycle with 1/2the

manufacturer's recommended amount of HE detergent for a

medium size load to clean out antifreeze.

To transport the washer:

1. If washer will be moved during freezing weather, put in 1 qt

(1 L) of R.V.-type antifreeze in the drum. Run washer on a

Drain & Spin cycle.

2. Unplug the power cord.

3. Disconnect the drain hose from the drain system and attach

to rear panel clips.

4. Shut off both water faucets.

5. Disconnect the water inlet hoses from faucets, then drain the

hoses and clip them to the rear panel of the washer.

IMPORTANT: Call Service. Do not reuse transport bolts. Unit

must be transported in the upright position. To avoid suspension

and structural damage to your washer, it must be properly set up

for relocation by a certified technician.

Reinstalling the washer

1. Follow the "Installation Instructions" to locate, level and

connect the washer.

2. Run the washer through the Normal/Casual cycle with 1/2the

manufacturer's recommended amount of HE detergent for a

medium size load.

La page charge ...

Kenmore Elite HE3 110.4586 Series Le manuel du propriétaire

Marque: Kenmore

Modèle: Elite HE3 110.4586 Series

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Kenmore Elite HE3 110.4586 Series Owner's manual
español: Kenmore Elite HE3 110.4586 Series El manual del propietario

Kenmore Elite HE3 110.4586 Series Le manuel du propriétaire

Ce manuel convient également à

Kenmore Elite HE3 110.4586 Series Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents