Cameo AZOR® W2 Manuel utilisateur

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

AZOR® W2

LED WASH MOVING HEAD

CLAZORW2

CONTENTS / INHALTSVERZEICHNIS / CONTENU /

CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 5

INTENDED USE 5

DEFINITIONS AND SYMBOL EXPLANATIONS 5

SAFETY INSTRUCTIONS 6

NOTES ON PORTABLE INDOOR DEVICES 10

PACKAGING CONTENT 10

INTRODUCTION 10

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 11

OPERATION 12

SETUP AND INSTALLATION 20

CARE, MAINTENANCE AND REPAIR 21

DIMENSIONS 22

TECHNICAL SPECIFICATIONS 23

MINIMUM DISTANCE TO ILLUMINATED SURFACE 24

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 24

DISPOSAL 24

MANUFACTURER’S DECLARATIONS 25

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 26

BESTIMMUNGSGEMÄSSER GEBRAUCH 26

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 26

SICHERHEITSHINWEISE 27

HINWEISE FÜR ORTSVERÄNDERLICHE INDOOR-GERÄTE 31

LIEFERUMFANG 31

EINFÜHRUNG 31

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 32

BEDIENUNG 34

AUFSTELLUNG UND MONTAGE 43

PFLEGE, WARTUNG UND REPARATUR 43

ABMESSUNGEN 45

TECHNISCHE DATEN 45

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 47

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 47

ENTSORGUNG 47

HERSTELLERERKLÄRUNGEN 47

FRANÇAIS

INFORMATIONS SUR CE MANUEL D'UTILISATION 49

UTILISATION PRÉVUE 49

DÉFINITIONS ET EXPLICATION DES PICTOGRAMMES 49

CONSIGNES DE SÉCURITÉ 50

NOTES SUR LES APPAREILS PORTABLES POUR INTÉRIEUR 54

CONTENU DU CARTON 55

INTRODUCTION 55

CONNECTEURS, UTILISATION ET INDICATEURS 56

UTILISATION 57

MONTAGE ET INSTALLATION 66

ENTRETIEN, MAINTENANCE ET RÉPARATION 66

DIMENSIONS 68

CARACTÉRISTIQUES TECHNIQUES 68

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 70

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX INFLAMMABLES ORDINAIRES 70

MISE AU REBUT 70

DÉCLARATIONS DU FABRICANT 71

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DE USUARIO 72

USO PREVISTO 72

DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 72

INSTRUCCIONES DE SEGURIDAD 73

INDICACIONES PARA EQUIPOS PORTÁTILES DE INTERIOR 77

ELEMENTOS SUMINISTRADOS 77

INTRODUCCIÓN 77

CONEXIONES, CONTROLES E INDICADORES 78

OPERACIÓN 80

INSTALACIÓN Y MONTAJE 88

CUIDADO, MANTENIMIENTO Y REPARACIÓN 89

DIMENSIONES 90

CARACTERÍSTICAS TÉCNICAS 90

DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 92

DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 92

ELIMINACIÓN 92

DECLARACIÓN DEL FABRICANTE 93

POLSKI

INFORMACJE NA TEMAT NINIEJSZEJ INSTRUKCJI OBSŁUGI 94

ZAMIERZONE ZASTOSOWANIE 94

DEFINICJE I OBJAŚNIENIA SYMBOLI 94

INSTRUKCJE BEZPIECZEŃSTWA 95

UWAGI DOTYCZĄCE URZĄDZEŃ PRZENOŚNYCH DO UŻYTKU W POMIESZCZENIACH 99

ZAWARTOŚĆ OPAKOWANIA 100

WPROWADZENIE 100

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 101

OBSŁUGA 102

KONFIGURACJA I INSTALACJA 111

PIELĘGNACJA, KONSERWACJA I NAPRAWA 111

WYMIARY 113

SPECYFIKACJE TECHNICZNE 113

MINIMALNA ODLEGŁOŚĆ OD OŚWIETLANEJ POWIERZCHNI 115

MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW 115

UTYLIZACJA 115

DEKLARACJE PRODUCENTA 116

ITALIANO

INFORMAZIONI SU QUESTO MANUALE D’ISTRUZIONI 117

USO CONFORME 117

SPIEGAZIONE DI TERMINI E SIMBOLI 117

INDICAZIONI SULLA SICUREZZA 118

AVVERTENZE PER DISPOSITIVI PORTATILI PER INTERNI 122

DOTAZIONE 122

INTRODUZIONE 123

CONNESSIONI, ELEMENTI DI COMANDO E INDICATORI 124

UTILIZZO 125

INSTALLAZIONE E MONTAGGIO 134

CURA, MANUTENZIONE E RIPARAZIONE 135

DIMENSIONI 136

DATI TECNICI 136

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 138

DISTANZA MINIMA DA MATERIALI NORMALMENTE INFIAMMABILI 138

SMALTIMENTO 138

DICHIARAZIONI DEL FABBRICANTE 139

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / 140

CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 140

CONTENTS / INHALTSVERZEICHNIS / CONTENU /

CONTENIDO / TREŚĆ / CONTENUTO

5

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of trouble-free operation. Please read this user manual carefully to be able to quickly

put your new Cameo Light product to optimum use. Further information about Cameo Light is

available on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is an

integral part of the product.

INTENDED USE

This product is a device for event technology!

This product has been developed for professional use in the field of event technology and is not

suitable for use as domestic lighting!

Furthermore, this product is only intended for qualified users with specialist knowledge

of event technology!

Use of the product outside the specified technical data and operating conditions is considered

improper use!

Liability for damage and third-party damage to persons and property due to inappropriate use

is excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially

dangerous situations or conditions for life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-

tions or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations

or conditions that can lead to damage to property and/or the environment.

6

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

This symbol indicates a device that may only be used in dry rooms.

SAFETY INSTRUCTIONS

DANGER:

1. Do not open or modify the device.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and disconnect it

from the mains. The device may be repaired only by authorised repair technicians.

3. For devices of protection class 1, the protective earth conductor must be connected

correctly. Never disconnect the protective earth conductor. Devices of protection

class 2 do not have a protective earth conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device must not be used if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the power cable of the device is damaged, do not operate the device.

4. Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

1. Do not switch on the device if it has been exposed to extreme temperature ﬂuctu-

ations (for example, following transport). Moisture and condensation can damage

the device. Switch on the device only when it has reached ambient temperature.

7

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

2. Make sure that the voltage and frequency of the mains supply correspond to the

values indicated on the device. If the device has a voltage selector switch, do not

turn the device on until it has been set correctly. Use only suitable power cables.

3. To disconnect the device from the mains at all poles, it is not sufﬁcient to press the

on/off switch on the unit.

4. Make sure that the fuse used corresponds to the type printed on the device.

5. Make sure that appropriate measures have been taken against overvoltage (e.g.

lightning strike).

6. Observe the speciﬁed maximum output current on devices with a Power Out con-

nection. Ensure that the total current consumption of all connected devices does

not exceed the speciﬁed value.

7. Replace plug-in power cables only with original cables.

8. Connect the device only to compliant, tested and undamaged power outlets.

DANGER:

1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of

persons (including children) with reduced physical, sensory or mental capabilities.

2. Danger caused by falling device! Make sure that the device is securely installed

and cannot fall down. Only use suitable stands or mounts (particularly for fixed

installations). Ensure that accessories are properly installed and secured. Ensure

that all applicable safety regulations are observed.

WARNING:

1. Use the device in the prescribed manner only.

2. Operate the device using only accessories of the type recommended and supplied

by the manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the device, ensure that all cables are routed so as to avoid dam-

age or accidents, such as from tripping.

5. Be sure to observe the speciﬁed minimum distance to normally ﬂammable materi-

als! Unless explicitly stated, the minimum distance is 0.3 m.

CAUTION:

1. Moving components such as mounting brackets pose a jamming hazard.

2. In the case of devices with motor-driven components, there is a risk of injury from

the movement of the device. Sudden movement of the device can cause shock

reactions.

3. The exterior surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

device to cool sufﬁciently before removal, maintenance work and charging etc.

8

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ATTENTION:

1. Do not install and operate the device in the vicinity of radiators, heat accumulators,

ovens, or other heat sources. Ensure that the device is always installed in such a

way that it is sufficiently cooled and cannot overheat.

2. Do not place ignition sources such as lighted candles near the device.

3. Vents must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or impact to the device.

6. Observe the IP rating as well as the ambient conditions such as temperature and

humidity according to the specification.

7. Devices can always be further improved. In the event of any discrepancies between

the operating instructions and the device labelling with regard to operating condi-

tions, performance or other device characteristics, the information on the device

always takes precedence.

8. The device is not suitable for tropical climates and for operation at elevations high-

er than 2000 m above sea level.

9. Unless explicitly stated, the device is not suitable for operation in marine condi-

tions.

PLEASE NOTE:

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the included instructions.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

4. Permanently installed lamps are built into these lighting units. These may not

be replaced by the user. The lamps contained in this lighting unit may only be

replaced by the manufacturer, its service partner, or a similarly qualiﬁed person.

SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or wireless audio systems):

The quality and performance of wireless signal transmissions generally depends on

the ambient conditions. For example, the following factors can impact range and

signal quality:

Shielding (e.g. masonry, metal structures, water)

High volumes of radio traffic (e.g. powerful wireless LAN networks)

Interference

Electromagnetic radiation (e.g. LED video screens, dimmers)

All range specifications refer to free-field line-of-sight applications without interference!

9

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

The operation of radio systems is subject to official regulations. These may vary from

region to region and must be checked by the operator before use (e.g. radio frequency

and transmission power).

WARNING:

Wireless transmitting devices are not suitable for use in sensitive areas in which radio

operation can lead to potential detrimental effects. These include e.g.:

• Hospitals, health centres or other healthcare facilities that provide patient treatment

with skilled personnel and equipment.

• Hazardous areas Class I, II and III

• Restricted areas

• Military facilities

• Aircraft or vehicles

• Areas where the use of mobile phones is prohibited

TRANSMISSION VIA W-DMX

WARNING: In general, wireless DMX transmission must not be used for applications

involving safety-related factors that might result in personal injury or property dam-

age in the event of a failure.

This applies in particular to moving scene or traverse structures, DMX-controlled mo-

tors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic systems

or comparable moving components.

Furthermore, wireless DMX transmission must not be used to control flame or

pyrotechnic devices, explosion effects, or gas or liquid effects. These include CO2

cannons, confetti shooters, water effects or similar.

ATTENTION! POTENTIAL DAMAGE FROM EXTERNAL LIGHT SOURCES!

Solar radiation, laser radiation and bundled light beams from other spotlights can

damage the housing and internal components such as filters, gobo and colour

wheels, motors, cables, belts, etc., as well as light sources!

Do not expose the device and especially the lens opening to direct sunlight, laser

radiation and bundled light beams from other spotlights during unpacking, installa-

tion, prolonged disuse and operation! Always point the lens opening towards the floor

when the device is not in use! Damage caused by external light sources is excluded

from the manufacturer's warranty!

10

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

NOTES ON PORTABLE INDOOR DEVICES

1. Temporary operation! Event equipment is generally only designed

for temporary operation.

2. Continuous operation or permanent installation can impair the functionality of the

device and cause premature ageing.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material.

Please check the completeness and integrity of the delivery and notify your distribution partner

immediately after purchase if the delivery is not complete or if it is damaged.

The packaging content includes:

X 1 x AZOR W2 LED Moving Head

X 1 x Power cable

X 2 x Omega bracket

X 1 x User manual

INTRODUCTION

LED moving head

CLAZORW2

CONTROL FUNCTIONS:

19-channel, 18-channel HSI, 18-channel RGBL, 23-channel RGBL, 34-channel HSI, 36-channel

RGB, 43-channel RGBL, 44-channel RGBL and 54-channel Full Access DMX control

DMX512

W-DMX™ via optional Cameo iDMX stick

RDM

Master / slave operation

Standalone functions

FEATURES:

7 x 40 W RGBL LEDs plus 48 x 2 W white effect LEDs. DMX512. Connection for optional iDMX stick

for wireless control via W-DMX™. 5-pin DMX connections. 2 Omega mounting brackets included.The

spotlight supports the RDM standard (Remote Device Management). Remote device management

allows the user to monitor the status and configuration of RDM devices using an RDM-capable

controller, such as the optionally available Cameo UNICON (item number CLIREMOTE).

The Cameo UNICON also allows access to the entire spotlight menu.

11

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1 2

3

4

5

6

7

8

9

1 POWER IN

TRUE1-compatible mains input socket. Operating voltage 100 - 240 V AC / 50 - 60 Hz. Use the

included power cable.

2 POWER OUT

TRUE1-compatible mains output socket. Enables power supply to other CAMEO spotlights. Ensure

that the total power consumption of all connected devices does not exceed the value specified on

the device in amperes (A).

3 FUSE

Fuse holder for 5 x 20mm fuses. IMPORTANT NOTE: Only replace the fuse with a fuse of the same

type and value. In the event of repeated fuse failure, please contact an authorised service centre.

4 DMX IN

Male 5-pin XLR socket for connection to a DMX control device (e.g. DMX console).

5 DMX OUT

Female 5-pin XLR socket for forwarding the DMX control signal.

12

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

6 IDMX STICK

Connection for the optional iDMX stick for W-DMX™ operation (insert the iDMX stick with the

antenna facing upwards). Note the wireless settings in the Settings menu.

7 AIR VENTS

To prevent damage to the device, do not cover the ventilation openings on the back and ensure

that air can circulate freely.

8 OLED DISPLAY

The OLED display shows the currently active operating mode (main screen), the menu items

and the numerical value or operational status of certain menu items. If no input is made within

approximately one minute, the display automatically returns to the main screen. Note on the main

screen in operating modes with external control: In the event that the control signal is interrupted,

the characters in the display begin flashing; once the control signal is present again, the flashing

stops.

9 CONTROL BUTTONS

MENU – Press MENU to access the main menu. Press again or repeatedly to return to the main

screen. Pressing MENU without confirming a value or status change by pressing ENTER restores

the previously confirmed value or status.

ENTER – Press ENTER to access the menu and submenus. ENTER is also used to confirm value or

status changes.

⏶ and ⏷ – Select menu items in the main menu (DMX address, DMX mode etc.) and in the sub-

menus. Allows you to change the value of a menu option, such as the DMX address (long press =

quick value change).

OPERATION

NOTES

Upon switching on the spotlight, the message "Update Wait" is displayed momentarily, followed

by "Welcome to Cameo", the model name and the software version. Thereafter, the motors are

reset (Motor Reset Please Wait). After this process, the spotlight is ready for operation and the

previously activated operating mode is launched.

13

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

MAIN SCREEN IN DMX OPERATING MODE

In DMX mode, the main screen shows the currently set DMX start address (see illustration). Flas-

hing characters indicate that no DMX signal is present.

SET DMX START ADDRESS (DMX Address)

Starting from the main screen, press MENU to enter the main menu. Nowuse ⏶ or ⏷ to select

the menu item DMX Address and confirm with ENTER. Use the ⏶ or ⏷ buttons to configure the

desired DMX start address and press ENTER to confirm (the highest possible value depends on

the selected DMX mode).

CONFIGURING DMX MODE (DMX MODE)

Starting from the main screen, press MENU to enter the main menu. Nowuse ⏶ or ⏷ to select

the menu item DMX Mode and confirm with ENTER. Select the desired DMX operating mode

using ⏶ or ⏷ and confirm with ENTER. Tables showing the channel assignment of the different

DMX modes can be found in the DMX CONTROL section of this user manual.

STAND-ALONE MENU

In the stand-alone operating modes (Play Scene and Play Loop), the control signal of the corres-

ponding mode can be output to slave units via XLR. If you do not want to output the control signal,

deactivate the output.

14

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

A delay can be set for slave units for the time-delayed output of the control signal of the

stand-alone operating modes. Activate one of the eight available scenes (Scene 1 - 8) or one of

the eight available loops (Loop 1 - 8). The settings are made individually for each scene and each

loop and are retained even after the device is restarted.

Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to

select the Stand Alone menu item and confirm with ENTER. Now select the desired submenu

item, confirm and then make the settings as required (see table).

Forward control signal via DMX OUT and set delay

for slave units: Off, 0.1s - 2.0s

Do not forward control signal

Select and activate the desired scene

Select and activate the desired loop

Set each scene individually.

Scenes are activated by selecting them.

Select scene 1 - 8

Set step time

Set fade time

“

Select scene 1 - 8 / skip step

Set step time

Set fade time

“

15

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

SLAVE MODE

Standard slave operation: Starting from the main screen, press MENU to enter the main menu.

Use the ⏶ or ⏷ buttons to select the Slave menu item, confirm with ENTER, then select slave

group 0 and confirm again. Connect the slave and master units (same model, same software

version) using a DMX cable and activate the control signal output (Stand Alone -> Master/Alone

-> Master) and one of the stand-alone operating modes (Play Scene/Loop) in the master unit. The

slave unit will now follow the master unit.

Advanced slave mode: If you wish to control the slave units in master/slave mode using one

of the Play Scene or Play Loop stand-alone modes, the control signal can be played back with

a time delay of up to 24 steps. The delay is set in the Stand Alone menu Master/Alone in the

master unit; the delay factor is set in the slave menu of the corresponding spotlight (Group). This

is a simple way to create a running light effect with a large number of identical spotlights that are

running the same software version, which would otherwise require a suitable DMX controller and

extensive programming. Connect the slave and master units (same model, same software version)

using a DMX cable and activate the control signal output (Stand Alone -> Master/Alone -> Master)

and one of the stand-alone operating modes (Play Scene/Loop) in the master unit.

Group 0-24 Set the slave group for

signal delay

Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby

several spotlights can be assigned to one group. The group number is also the factor by which the

delay time set in the master unit is multiplied.

Setup example:

16

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

SYSTEM SETTINGS (Settings)

Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to

select the menu item Settings and confirm with ENTER.

This takes you to the submenu (see table). Select submenu items with ⏶ or ⏷, confirm with

ENTER, change value or status with ⏶ or ⏷, confirm with ENTER).

(Bold print = factory setting)

Wireless

Settings (iDMX

stick optional)

Wireless control deactivated

Wireless control activated

Signal -> DMX OUT

Backup via DMX IN in case of W-DMX

signal interruption

W-DMX reception only

Display

Settings Display rotation by 180° (e.g. for over-

head installation)

No display rotation

Permanently on

Deactivates after approximately 20

seconds of inactivity

Autolock function deactivated

Controls locked after approx. 60

seconds without input (LOCKED). To

unlock, press MENU for approx. 3

seconds.

Dimmer

Settings

(Dim-

mer curve)

Light intensity increases linearly with

DMX value

Light intensity can be ﬁnely adjusted

at lower DMX values and broadly

adjusted at higher DMX values

Light intensity can be broadly adjusted

at lower DMX values and ﬁnely adjust-

ed at higher DMX values

17

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

Dimmer

Settings

(Dim-

mer curve)

Light intensity can be ﬁnely adjusted

at lower and higher DMX values and

broadly adjusted at medium DMX

values

Select LED PWM frequency

(Dimmer

response)

The spotlight responds immediately to

changes of the DMX value

The spotlight behaves in a similar way

to a halogen spotlight with gradual

changes of brightness

Colour calibration R, G, B, and L (maximum value: 255)

Custom colour calibration. Brightness

setting of R, G, B and L with values

ranging from 0 - 255

Factory calibration

Merging factory and RAW calibration

Set head move-

ments

Pan direction not reversed

Pan direction reversed

Tilt direction not reversed

Tilt direction reversed

Pan angle 540°

Pan angle 630°

Automatic position correction disabled

Automatic position correction enabled

No blackout during head movement

Blackout during head movement

Function disabled

Slowed motor movements for quieter

operation

Fan

settings

Automatic fan control

Deactivated fan with greatly reduced brightness

Constant low fan speed with reduced brightness,

if necessary

Constant average fan speed with reduced bright-

ness, if necessary

Constant high fan speed

18

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Operational status

in case the DMX

signal is inter-

rupted

Last command is retained

The last selected stand-alone operating mode is

activated

10 second fade to blackout

Activates blackout

Full On

Mirror pixels Function disabled

Mirror pixels horizontally

Flip pixels vertically

Flip pixels horizontally and vertically

Save settings in 3

custom presets

Save all current settings as user preset A

Save all current settings as user preset B

Save all current settings as user preset C

SERVICE MENU (Service)

Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to

select Service and confirm with ENTER.

Information on the submenu items in the Service menu and the corresponding options can be

found in the table below (select with ⏶ or ⏷, confirm with ENTER, change value or status with

⏶ or ⏷, confirm with ENTER).

Reset to factory setting

Resets to User A values (store user values:

Settings -> Store Default)

Resets to User B values (store user values:

Settings -> Store Default)

Resets to User C values (store user values:

Settings -> Store Default)

Reset pan / tilt motors

Reset motors in the device head

Reset all motors

19

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

Pre-programmed sequence to test all components

Pre-programmed sequence to test all components under maxi-

mum load

Activate all motors individually with values of 000 to 255

Do not reset service operation time

Reset service operation time

SYSTEM INFORMATION (System Info)

Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to

select the menu item System Info and confirm with ENTER.

This takes you to the submenu (see table for submenu items). Select submenu items with ⏶ or

⏷, confirm with ENTER, change value or status with ⏶ or ⏷, confirm with ENTER).

Display the ﬁrmware version of the corre-

sponding component

Display the temperature of the corresponding

component

(Celsius) Set temperature unit

(Fahrenheit)

Display the speed of the corresponding fans

Total operating time

Time in use

Lamp operating time

Operating time since the last reset of the

service operating time

(unique identiﬁer)

Error display in case of malfunction

20

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

QUICKLIGHT

Set up a scene quickly and easily using the basic Moving Head functions without an external

controller. Starting from the main screen, press MENU to access the main menu. Use ⏶ or ⏷ to

select Quicklight and confirm with ENTER. Now select the desired submenu item, confirm, set

the value as required and confirm again.

If the Quicklight mode is activated, the display does not automatically return to the main screen.

Quicklight mode is automatically cancelled when you exit the Quicklight menu. The Quicklight

settings are retained until the next restart of the spotlight. Quicklight can be accessed repeatedly

with the same settings as long as the spotlight remains switched on. After a restart, the values are

reset to the factory settings.

SETUP AND INSTALLATION

DANGER: Overhead mounting requires extensive experience, including calculating the

load limit values of the mounting hardware and regular safety inspection of all instal-

lation materials and spotlights. If you do not have these qualiﬁcations, do not attempt

to perform an installation yourself. Refer instead to a qualiﬁed professional. There is

a risk that devices that are incorrectly mounted and secured may come loose and fall

down. This can cause serious injury or death.

Thanks to its integrated rubber feet, the spotlight can be positioned in a suitable location on a

level surface. It can be truss-mounted using two Omega brackets, which are attached to the base

of the device (A). Two Omega brackets are included. Suitable truss clamps are available as an

option. Ensure firm connections and secure the spotlight to the securing lug (B) with a suitable

safety cable.

B

A

- Illustrations similar -

A

La page charge ...

Cameo AZOR® W2 Manuel utilisateur

Cameo AZOR® W2 Manuel utilisateur

dans d''autres langues

Documents connexes