Samsung hl-t7288 Le manuel du propriétaire

Catégorie
Téléviseurs LCD
Taper
Le manuel du propriétaire

Ce manuel convient également à

Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
Owners Instructions
HL-T7288W
DLP TV
BP68-00640A-00Eng.indb 3 2007-04-23 ¿ÀÈÄ 4:15:56
English - 2
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
A Guide to Digital TV
What is Digital Television?
Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can
transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting
more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital
broadcast.
Digital Television Services
Digital Picture Quality
DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High
Definition Television (HDTV).
SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video. 480i programs are essentially
a digital version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p
programs are broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.
HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always
broadcast in widescreen, and offer much higher picture quality than SDTV.
Dolby Surround Sound
With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to Dolby Digital 5.1 surround, using
your home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In
particular, this product is licensed under the following US patents:
5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985,
5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any
unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this
product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC
11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the
ISO/IEC 11172-3 or ISO/IEC 13818-3.
U.S.A Only
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This
license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial
use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed
product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The
license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC
13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or
ISO/IEC 13818-3.
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operated in
conjunction with any other antenna or transmitter.
BP68-00640A-00Eng.indb 2 2007-04-23 ¿ÀÈÄ 4:15:56
English - 3
Q&A
1. Is the antenna I use for existing TV reception good enough for DTV?
Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas.
However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV
broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.
If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds
true for VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.
You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.
com, www.10000watts.com, and www.fcc.gov.
2. How difficult is it to receive DTV signals indoors?
This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission
tower. DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.
Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same
quality it was originally encoded for broadcast.
This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.
3. How can I connect an antenna in my townhouse, co-operative apartment, condominium, or
apartment?
The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of 1996) allows residents of
condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV
signals as long as those antennas are not located in common areas and are no more than 12’ in height.
Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive
DTV broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV
antenna system to each apartment.
4. Can I connect my DTV set-top receiver to my cable TV service?
Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-
top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.
The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They’re
free, unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear,
sharp widescreen images and high-quality audio.
BP68-00640A-00Eng.indb 3 2007-04-23 ¿ÀÈÄ 4:15:56
English - 4
General Information
Viewing Position .......................................................5
List of Features .........................................................5
Checking Parts .........................................................6
Viewing the Control Panel ........................................6
Viewing the Connection Panel .................................8
Remote Control ........................................................9
Installing Batteries in the Remote Control ..............10
Connections
Connecting VHF and UHF Antennas ......................10
Connecting Cable TV ............................................. 11
Connecting a VCR ..................................................12
Connecting a Camcorder .......................................13
Connecting a DVD Player/Cable/Satellite Box (Set-Top Box)
..13
Connecting a DVD Player/Cable/Satellite Box (Set-Top Box) via HDMI
..14
Connecting a DVD Player/Cable/Satellite Box (Set-Top Box) via DVI
..14
Connecting a Digital Audio System ........................ 15
Connecting an Amplifier/DVD Home Theater .........15
Connecting a PC ....................................................16
Operation
Turning the TV On and Off ..................................... 16
Plug & Play Feature ...............................................17
Changing Channels ................................................19
Adjusting the Volume ..............................................19
Viewing the Display ................................................20
Viewing the Menus .................................................20
Using the TOOLS Button ........................................20
Memorizing the Channels .......................................21
Setting Up Your Remote Control ............................22
To Select the Source ..............................................27
To Edit the Input Source Name ..............................27
Picture Control
Using Automatic Picture Settings ........................... 28
Making Detailed Settings on the Picture ................29
Changing the Screen Size ......................................30
Digital Noise Reduction ..........................................31
Setting the Active Color ..........................................31
DNIe (Digital Natural Image engine) ......................32
Setting the Color Gamut .........................................32
Adjusting the Screen Position ................................33
Resetting the Picture Settings ................................33
Viewing Picture-in-Picture ...................................... 34
Freezing the Current Picture .................................. 35
Sound Control
Using the Automatic Sound Settings ......................36
Customizing the Sound ..........................................36
Setting the TruSurround XT ....................................37
Choosing a Multi-Channel Sound (MTS) Track -
Digital .....................................................................38
Choosing a Multi-Channel Sound (MTS) Track -
Analog ....................................................................38
Automatic Volume Control ......................................39
Selecting the Internal Mute .....................................39
Resetting the Sound Settings .................................40
Channel Control
Clearing Scrambled Channels
- Digital ...................40
Managing Channels ...............................................41
Fine Tuning Analog Channels
...........................46
Checking the Digital-Signal Strength
...............47
LNA (Low Noise Amplifier) ......................................47
Function Description
Selecting a Menu Language ...................................48
Setting the Time .....................................................48
Viewing Closed Captions (On-Screen Text
Messages) - Digital .................................................51
Viewing Closed Captions (On-Screen Text
Messages) - Analog ................................................52
Using the Game Mode ...........................................53
Using the 3D/Dual-View Function ..........................53
Using the V-Chip ....................................................54
Menu Transparency Level ......................................59
Setting the HDMI Black Level .................................59
Setting the Film Mode - Analog .............................. 60
Setting the Light Effect ...........................................60
Setting the Blue Screen Mode ................................61
Adjusting the Melody Sound ...................................61
Upgrading the Software ..........................................62
Setting the Function Help .......................................62
PC Display
Using Your TV as a Computer (PC) Display .......... 63
Display Modes ........................................................64
Setting up the TV with your PC ..............................65
Changing the Picture Size (PC Mode) ...................67
Setting the Home Theater PC ................................67
Bluetooth
What is Bluetooth? .................................................68
Bluetooth Communication and Setting Up PIN ......68
Connecting a Bluetooth Headset (Optional) ...........69
Capturing and Printing the Screen .........................69
Wiselink
Using the WISELINK Function ............................... 70
Using the WISELINK Mode ....................................71
Using the Photo (JPEG) List ..................................72
Using the Music (MP3) List ....................................79
About Anynet+
What is Anynet+? ...................................................81
Connecting Anynet+ Devices .................................81
Setting Up Anynet+ .................................................82
Scanning and Switching between Anynet+ Devices
.. 82
Recording ...............................................................83
Listening through a Home theater ..........................84
Troubleshooting for Anynet
+
..................................
84
Appendix
Identifying Problems ...............................................85
Replacing the Lamp
............................................86
Cleaning and Maintaining Your TV ......................... 87
Using Your TV in Another Country .......................... 87
Technical Specifications .........................................88
Contents
Symbols
Press
One-Touch
Button
Note
BP68-00640A-00Eng.indb 4 2007-04-23 ¿ÀÈÄ 4:15:57
English - 5
General Information
Viewing Position
To optimize your viewing comfort, please follow the guidelines below for viewing distance.
If viewing for an extended period of time, sit as far back from the screen as possible.
List of Features
Your TV is designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds
industry standards. In addition, it has these special features:
Easy-to-operate remote control
Dynamic menus and Navigating menus by using the menu map
Easy-to-use on-screen menu system you can access from the side panel or remote control
Automatic timer to turn the TV on and off at any time you choose
Adjustable picture and sound settings and the ability to memorize your favorite settings
Automatic channel tuning for up to 181 channels
A special filter to reduce or eliminate reception problems
Fine tuning control for the sharpest picture possible
A built-in multi-channel sound decoder for stereo and bilingual listening
Built-in, dual channel speakers
A special sleep timer
Widescreen TV with adjustable image size
Life-like clear images provided by DNle technology
My Color Control mode to correspond with your color preference
Digital Input jack
HDMI/DVI connection of your PC to this TV
Digital Audio Output (OPTICAL) jack
Theater Game Mode
Easy-to-use channel list menu.
AV network system (Anynet+) that enables you to easily control Samsung audio-video(AV) devices from this TV.
TV supports wireless connection to selected Bluetooth stereo headsets and photo printers.
WISELINK enables you to view and play photo (JPEG) and audio files (MP3) through the TV’s WISELINK jack.
When installing the product, make sure to keep it away
from the wall (more than 10cm / 4inches) for ventilation
purposes. Poor ventilation may cause an increase in
the internal temperature of the product, resulting in a
shortened component life and degraded performance.
< Top view> < Side view>
72˝ screen :
At least 8.4 feet
72˝ screen :
At least 8.4 feet
BP68-00640A-00Eng.indb 5 2007-04-23 ¿ÀÈÄ 4:15:57
English - 6
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
Checking Parts
Owners Instructions Remote Control
(BP59-00126A)/
AAA Batteries
Warranty Card/
Registration Card/
Safety Guide Manual/
Quick Guide Manual
Power Cord
(3903-000144)
Cloth-Clean
The product color and shape may vary depending on the model.
Continued...
Sold Separately
Replacement Lamp
For purchasing a replacement
lamp, ask at a nearby service
center.
Use authorized lamps only.
The company cannot guarantee
the quality of the product if an
unauthorized lamp is used.
S-Video Cable Video Cable Antenna Cable
Component Cables
Audio Cables
PC Cable PC Audio Cable HDMI/DVI Cable HDMI Cable Optical Cable
3.5mm Stereo/
2RCA Cable
BP68-00640A-00Eng.indb 6 2007-04-23 ¿ÀÈÄ 4:16:01
English - 7
1
SOURCE
Toggles between all the available input sources (TV,
AV1, AV2, AV3, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3/DVI, or
USB).
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL –
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL – buttons as
you would use the ◄ and ► buttons on the remote
control.
4
CH
Press to change channels.
In the on-screen menu, use the CH buttons as
you would use the ▲ and ▼ buttons on the remote
control.
5
(ENTER)
Press to confirm a selection.
6
POWER
Press to turn the TV on and off.
7
Remote Control Sensor
Aim the remote control towards this spot on the TV.
8
Indicator Lights
Blinks and turns off when the power is on and lights up
in stand-by mode.
Indicator Light Key
( : On, : Blinking, : Off)
STAND BY/TEMP TIMER LAMP Indication
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.
A cooling fan inside the set is not operating normally.
Lamp cover on the side of the set is not properly shut.
Check if the ventilation hole on the side of the set is blocked, because if the inner temperature is too
high, the power will shut off.
Lamp may be defective. Please contact a certified technician.
It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.
When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the
▲/▼/◄/► buttons on the remote control.
If the remote control no longer works or you have lost it, you can use controls on the TV’s panel.
BP68-00640A-00Eng.indb 7 2007-04-23 ¿ÀÈÄ 4:16:03
English - 8
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 10~16.
Continued...
The product color and shape may vary depending on the model.
1
ANT 1 IN (CABLE)/ANT 2 IN (AIR)
75Ω Coaxial connector for Air/Cable Network.
2
HDMI IN 1, HDMI IN 2
Connect to the HDMI jack of a device with HDMI output.
3
HDMI3/DVI IN
Connect to the HDMI jack of a device with HDMI output.
This input can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI cable
will be necessary to make this connection.
When using an optional HDMI/DVI adapter, the DVI analog
audio inputs on your TV allow you to receive left and right
audio from your DVI device.
4
RS232C
For service only.
5
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
6
DVI IN (AUDIO-L/R)
Connect to the DVI audio output jack of an external device.
7
S-VIDEO (AV IN 1, 2)
Video input for external devices with an S-Video output, such
as a Camcorder or VCR.
8
3D SYNC OUT
Connect to a 3D IR Emitter to enable the 3D Gaming
function.
9
VIDEO/AUDIO OUT-L/R (AV OUT)
Video/Audio outputs for external devices.
Video output is not avaiable RF(Digital)/Component/PC/
HDMI.
0
VIDEO/AUDIO-L/R (AV IN 1, 2)
Video input for external devices, such as a Camcorder or
VCR.
!
PC IN
Connect to the video output jack on your PC.
@
PC AUDIO IN
Connect to the audio output jack on your PC.
#
COMPONENT IN 1, 2
Video (Y/PB/PR) and audio (L-AUDIO-R) component inputs.
$
POWER IN
Connect the supplied power cord.
The product color and shape
may vary depending on the
model.
1
AV IN 3
Video and audio inputs for external devices.
2
WISELINK
Connect an USB mass storage device to view photo files (JPEG) and play audio files
(MP3).
Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game.
BP68-00640A-00Eng.indb 8 2007-04-23 ¿ÀÈÄ 4:16:04
English - 9
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly
at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1
POWER
Turns the TV on and off.
2
Numeric Buttons
Press to directly select a channel.
3
Press to select additional channels
being broadcast by the same station.
For example, to select channel “54-3”,
press “54”, then press “–” and “3”.
4
CH LIST
Used to display Channel Lists on the
screen.
5
ANTENNA
Press to select “Air” or “Cable”.
6
VOL +, VOL –
Press to increase or decrease the
volume.
7
MUTE
Press to temporarily cut off the sound.
8
MENU
Displays the main on-screen menu.
9
RETURN
Returns to the previous menu.
0
S.MODE
Press to select the sound mode.
!
P.MODE
Press to select the picture mode.
@
FAV.CH
Press to switch to your favorite
channels.
#
GAME
Press to select the Game mode except
for the TV mode.
$
CAPTION
Controls the caption decoder.
%
3D
Press to select the 3D/Dual-View
mode.
^
SET
Sets the remote to control your TV,
VCR, Cable, DVD, or Set-Top Box.
&
TV, DVD, STB, CABLE, VCR
Press to operate your TV, DVD, STB,
CABLE (box), or VCR.
*
SOURCE
Press to display all of the available
video sources.
(
Press to activate the backlight of the
VOL, CH and the active source button
(TV, DVD, CABLE, STB, VCR) on the
remote control.
)
PRE-CH
Tunes to the previous channel.
a
WISELINK
This function enables you to view and
play photo (JPEG) and audio files
(MP3) from an external device. (See
page 72 (JPEG), 79 (MP3))
b
REC
Use to make a recording.
c
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast Forward
d
CH , CH
Press to change channels.
e
EXIT
Press to exit from the menu.
f
UP▲/DOWN▼/LEFT◄/RIGHT►/
ENTER
Use to select on-screen menu items
and change menu values.
g
INFO
Press to display information on the TV
screen.
h
TOOLS
Use to quickly select frequently used
functions.
Anynet+
Runs the Anynet+ view functions and
sets up Anynet+ devices.
i
STILL
Press to stop the action during a
particular scene.
Press again to resume normal video.
j
P.SIZE
Press to change the screen size.
k
Color buttons
Press to add or delete channels and to
store channels to the favorite channel
list in the Channel List menu.
(Refer to pages 41~46)
l
CH /
Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
m
PIP
Picture-in Picture ON/OFF.
n
MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
o
RESET
When your remote control does not
work, change the batteries and press
the RESET button for 2-3 seconds
before use.
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired persons, and has Braille points on the POWER, Channel, Volume, STOP,
and PLAY/PAUSE buttons.
BP68-00640A-00Eng.indb 9 2007-04-23 ¿ÀÈÄ 4:16:06
English - 10
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
Remove the batteries and store them in a cool and dry place if you won’t be using the remote
control for a long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work! Check the following
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin
Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 twin flat leads, follow the
directions below.
1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).
Use a screwdriver to tighten the screws.
2 Plug the adaptor into the ANT 1 IN (CABLE) or ANT 2 IN (AIR) terminal on the side of the TV.
Antennas with 75 Ω Round Leads
1 Plug the antenna lead into the ANT 1 IN (CABLE) or ANT 2 IN (AIR) terminal on the side of the
TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before
connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics
shops).
1 Connect both antenna leads to the combiner.
2 Plug the combiner into the ANT 1 IN (CABLE) or ANT 2 IN (AIR) terminal on the bottom of the
side panel.
BP68-00640A-00Eng.indb 10 2007-04-23 ¿ÀÈÄ 4:16:09
English - 11
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1 Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the side of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting to a Cable Box that Descrambles All Channels
1 Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2 Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the side of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need
a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics
stores.)
1 Find and disconnect the cable that is connected
to the ANT IN terminal on your cable box.
This terminal might be labeled “ANT IN”, “VHF
IN” or simply, “IN”.
2 Connect this cable to a two-way splitter.
3 Connect an Antenna cable between an OUTPUT
terminal on the splitter and the IN terminal on the
cable box.
4 Connect an Antenna cable between the ANT OUT
terminal on the cable box and the B–IN terminal
on the RF(A/B) switch.
5 Connect another cable between the other OUT
terminal on the splitter and the A–IN terminal on
the RF (A/B) switch.
6 Connect the last Antenna cable between the OUT
terminal on the RF (A/B) switch and the ANT 1 IN
(CABLE) terminal on the side of the TV.
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to
view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which
is usually channel 3 or 4.)
Splitter
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Cable Box
Incoming
cable
RF (A/B)
Switch
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
TV Side
ANT OUT
ANT IN
ANT IN
BP68-00640A-00Eng.indb 11 2007-04-23 ¿ÀÈÄ 4:16:11
English - 12
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system.
1 Unplug the cable or antenna from
the back of the TV.
2 Connect the cable or antenna to
the ANT IN terminal on the side of
the VCR.
3 Connect an Antenna Cable
between the ANT OUT terminal
on the VCR and the ANT 1 IN
(CABLE) or ANT 2 IN (AIR)
terminal on the TV.
4 Connect a Video Cable between
the AV IN 1 [VIDEO] (or AV IN 2
[VIDEO]) jack on the TV and the
VIDEO OUT jack on the VCR.
5 Connect Audio Cables between the
AV IN 1 [L-AUDIO-R] (or AV IN 2
[L-AUDIO-R]) jacks on the TV and
the AUDIO OUT jacks on the VCR.
If you have a “mono”
(non-stereo) VCR, use a
Y-connector (not supplied) to
hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
S-Video Connection
Your Samsung TV can be connected to the S-Video jack of a VCR.
(This connection delivers a better picture when compared to the regular video connection above.)
1 To begin, follow steps 1–3 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
2 Connect an S-Video Cable
between the AV IN 1 [S-VIDEO] (or
AV IN 2 [S-VIDEO]) jack on the TV
and the S-VIDEO OUT jack on the
VCR.
3 Connect Audio Cables between the
AV IN 1 [L-AUDIO-R] (or AV IN 2
[L-AUDIO-R]) jacks on the TV and
the AUDIO OUT jacks on the VCR.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
Some games may be displayed with a cut off picture when the TV is connected to a game player.
2
TV Rear Panel
VCR
Audio Cable(Not supplied)5
Video Cable(Not supplied)4
Antenna cable(Not supplied)3
TV Rear Panel
VCR
Audio Cable
(Not supplied)
3
S-Video Cable(Not supplied)2
Antenna cable(Not supplied)1
1
1
BP68-00640A-00Eng.indb 12 2007-04-23 ¿ÀÈÄ 4:16:14
English - 13
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1 Connect a Video Cable or S-Video
Cable between the AV IN 3 [VIDEO]
jack on the TV and the VIDEO OUT
jack on the camcorder.
2 Connect Audio Cables between the
AV IN 3 [L-AUDIO-R] jacks on the
TV and the AUDIO OUT jacks on
the camcorder.
Each Camcorder has a different side panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
Connecting a DVD Player/Cable/Satellite Box (Set-Top Box)
The rear jacks on your TV make it easy to connect a DVD Player/Cable/Satellite Box (Set-Top Box).
1 Connect Component Cables
between the COMPONENT IN 1
[Y, PB, PR] (or COMPONENT IN
2 [Y, PB, PR]) jacks on the TV and
the COMPONENT OUT [Y, PB, PR]
jacks on the DVD Player/Cable/
Satellite Box (Set-Top Box).
2 Connect Audio Cables between the
COMPONENT IN 1 [L-AUDIO-R]
(or COMPONENT IN 2 [L-AUDIO-
R]) jacks on the TV and the AUDIO
OUT jacks on the DVD Player/
Cable/Satellite Box (Set-Top Box).
Component video separates the video into Y Luminance (brightness), PB (Blue) and PR (Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.
Each DVD Player/Cable/Satellite Box (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player/Cable/Satellite Box (Set-Top Box), match the color of the connection terminal to the cable.
TV Side Panel
Camcorder
Video Cable(Not supplied)
1
Audio Cable(Not supplied)
2
TV Rear Panel
DVD Player/Cable/Satellite Box (Set-Top Box)
Audio Cable(Not supplied)
2
Component Cable(Not supplied)
1
BP68-00640A-00Eng.indb 13 2007-04-23 ¿ÀÈÄ 4:16:17
English - 14
Connecting a DVD Player/Cable/Satellite Box (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable or
DVI-HDMI Adapter between the
HDMI3/DVI IN jack on the TV and
the DVI OUT jack on the DVD
Player/Cable/Satellite Box (Set-
Top Box).
2 Connect Audio Cables between
the DVI IN [L-AUDIO-R] jacks on
the TV and the AUDIO OUT jacks
on the DVD Player/Cable/Satellite
Box (Set-Top Box).
Each DVD Player/Cable/Satellite Box (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player/Cable/Satellite Box (Set-Top Box), match the color of the connection terminal to the cable.
Connecting a DVD Player/Cable/Satellite Box (Set-Top Box) via HDMI
HDMI offers the best video quality. This connection can only be made if there is an HDMI Output jack on the external device.
1 Connect an HDMI Cable between
the HDMI IN 1 (or HDMI IN 2 ) on
the TV and the HDMI OUT jack on
the DVD Player/Cable/Satellite Box
(Set-Top Box).
What is HDMI?
HDMI, or high-definition multimedia interface, enables the transmission of the digital audio and video signals using a single cable.
“Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi-channel digital audio.
Each DVD Player/Cable/Satellite Box (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player/Cable/Satellite Box (Set-Top Box), match the color of the connection terminal to the cable.
When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio cables when connecting
via HDMI/DVI.
The TV may not output sound when DVD Players/Cable Boxes/Satellite receivers that support older HDMI versions than 1.3 are
connected. If you connect an older version HDMI cable and do not hear sound, connect the HDMI cable to the HDMI3/DVI IN jack
and audio cables to DVI IN [R-AUDIO-L] jacks on TV’s back panel.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
TV Rear Panel
DVD Player/Cable/Satellite Box (Set-Top Box)
Audio Cable(Not supplied)
2
HDMI Cable(Not supplied)
1
DVD Player/Set-Top Box
TV Rear Panel
HDMI/DVI Cable(Not supplied)
1
BP68-00640A-00Eng.indb 14 2007-04-23 ¿ÀÈÄ 4:16:18
English - 15
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jack on the TV and
the Digital Audio Input jack on the
Digital Audio System.
When a Digital Audio System
is connected to the DIGITAL
AUDIO OUT (OPTICAL) terminal:
Decrease the volume of the TV,
and adjust the volume level with
the audio system’s volume control.
Each Digital Audio System has a different back panel configuration.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
What is OPTICAL?
Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of
digital audio in the form of a light wave that uses a glass conductor.
DIGITAL AUDIO OUT (OPTICAL) RF (Digital/Analog), AV, S-Video Sound is output
When a DVD player or Cable/Satellite box is connected to the COMPONENT or HDMI IN jacks on the TV, the Optical jack outputs 2.1
channel audio only. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the player or box
directly to the Digital Audio System, not the TV.
Connecting an Amplifier/DVD Home Theater
1 Connect Audio Cables between
the AV OUT [L-AUDIO-R] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the AV OUT [L-
AUDIO-R] terminals: Decrease the
volume of the TV, and adjust the
volume level with the amplifiers
volume control.
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
TV Rear Panel
Optical Cable (Not supplied)
1
Digital Audio System
TV Rear Panel
Audio Cable (Not supplied)
1
Amplifier/DVD Home Theater
BP68-00640A-00Eng.indb 15 2007-04-23 ¿ÀÈÄ 4:16:20
English - 16
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
It may take a while when your TV starts.
Connecting a PC
Using a D-Sub Cable
1 Connect a D-Sub Cable between
the PC IN [PC] jack on the TV
and the PC output jack on your
computer.
2 Connect a PC Audio Cable
between the PC IN [AUDIO] jack
on the TV and the Audio Out
jack of the sound card on your
computer.
Using an HDMI/DVI Cable
1 Connect an HDMI/DVI Cable
between the HDMI3/DVI IN jack on
the TV and the PC output jack on
your computer.
2 Connect a 3.5 mm Stereo mini-
plug/2RCA Cable between the DVI
IN [L-AUDIO-R] jack on the TV and
the Audio Out jack of the sound
card on your computer.
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When connecting the HDMI/DVI to your PC, select HDMI3/DVI and in Edit Name (in the Input Menu) select PC to see the original
screen with no cutting images. See page 27.
TV Rear Panel
PC
PC Audio Cable (Not supplied)
2
D-Sub Cable (Not supplied)
1
Using a D-Sub Cable
Using an HDMI/DVI Cable
TV Rear Panel
PC
3.5mm Stereo/2RCA Cable (Not supplied)
2
HDMI/DVI Cable (Not supplied)
1
BP68-00640A-00Eng.indb 16 2007-04-23 ¿ÀÈÄ 4:16:24
English - 17
Plug & Play Feature
The first time you turn on your new TV, choose your basic settings for language, input source and channels, and
time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in
memory will allow you to scan the stored channels rather than have to enter their digits each time you want to
change channels.
When the TV is initially powered on, basic settings proceed automatically:
1 Press the POWER button on the remote control.
The message Executes the Plug & Play function when you set the TV at first or
reset it. Sets channels, clock and other functions. is automatically displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is automatically
displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
The default selection is Home.
We recommend setting the TV to Home mode for the best picture in your home
environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode, and you want to return to Dynamic
(Home) mode, press the Volume button and then hold down the
MENU button for
five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection, then
press the ENTER button.
If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is
connected to ANT 2 IN (AIR), select Air.
If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air +
Cable.
In Cable mode, you can select the correct analog signal source among STD, HRC,
and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have
Digital cable, select the signal source for both Analog and Digital.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The Clock Mode menu is displayed.
To stop the search before it has finished, press the ENTER button with stop
selected.
Continued...
Plug & Play
Executes the Plug & Play function when you set the TV
at first or reset it. Sets channels, clock and other
functions.
Exit
Enter
OK
Plug & Play
Select Language of the OSD.
Menu Language : English
English
Español
Français
SkipEnter
Plug & Play
Select Home Mode when installing this TV at home.
Home
Shop
SkipEnter
SkipEnter
Plug & Play
Select the antennas to memorize
Air
Cable
Air+Cable
Start
Start
Start
Plug & Play
Selects the cable sys
tem.
Analog
Digital
STD
HRC IRC
HRC IRC
SkipEnter
Plug & Play
Auto Program in Progress.
Stop
Cable 10
3%
SkipEnter
STD
Move
Move
Move
Move
Digital Channels are added on the favorite
channel list.
Plug & Play
Auto Program is completed.
3 channels are memorized.
Air : 1 Cable : 2
OK
SkipEnter
Plug & Play
Would you like to stop the auto channel
selection ?
Cable 10
3%
Digital Channels are added on the favorite
channel list.
Enter
No
Yes
Move
Skip
BP68-00640A-00Eng.indb 17 2007-04-23 ¿ÀÈÄ 4:16:28
English - 18
6 Press the ENTER button.
Press the ▲ or ▼ button to select Manual for setting the current time manually, then
press the ENTER button. The message Set current date and time. is displayed.
If you select Auto. Set to daylight saving time. is displayed, then go to step 9.
7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or am/pm.
Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER
button.
You can set the month, day, year, hour, and minute directly by pressing the number
buttons on the remote control.
8 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
Setting the Clock Automatically
9 Press the ENTER button.
Press the ▲ or ▼ button to select Off or On, then the ENTER button.
The message Select the time zone in which you live. is displayed.
10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the
highlight to the appropriate time zone on the map of the United States).
Press the ENTER button.
If clock is not automatically set, see pages 48~49 to set the clock.
11 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
SkipEnter
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
SkipEnter
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Auto
Manual
Plug & Play
Set current date and time
Month
Day
Year
Hour
Minute
am/pm
Enter
Skip
Move
Adjust
SkipEnter
Plug & Play
Set to daylight saving time.
DST : Off
SkipEnter
Plug & Play
Set to daylight saving time.
DST : Off
Off
On
Plug & Play
Select the time zone in which you live.
SkipEnter
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Plug & Play
Enjoy your watching.
OK
Move
Move
Move
BP68-00640A-00Eng.indb 18 2007-04-23 ¿ÀÈÄ 4:16:29
English - 19
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized at
least three channels). You will not see channels that were either erased or not memorized.
See page 21 to memorize channels.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2,” then “7.”
The TV will change channels when you press the second number.
Using the “
-
” Button
The “
-
” button is used to select stations that broadcast a digital signal.
For example, for Channel 7-1, press “7”, then “-”, and then “1”.
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the ENTER button.
Using the PRE-CH Button to select the Previous Channel
Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
Adjusting the Volume
Press the VOL + or VOL button to increase or decrease the volume.
Using the Mute Button
At any time, you can cut off the sound using the MUTE button.
1 Press the MUTE button and the sound cuts off.
The is displayed on the screen.
2 To turn mute off, press the MUTE button again, or simply press the VOL + or VOL – button.
BP68-00640A-00Eng.indb 19 2007-04-23 ¿ÀÈÄ 4:16:31
English - 20
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
Press the INFO button on the remote control.
Viewing the Menus
1 With the power on, press the MENU button.
The main menu will appear on the left side of the screen.
There are seven menu groups: Picture, Sound, Channel, Setup, Input, Guide,
and PIP.
2 Press the ▲ or ▼ button, then press the ENTER button to select an item you want in the
menu. Press the ▲/▼/◄/►/ENTER button to display, change, or use the selected items.
Press the EXIT button to exit.
Using the TOOLS Button
The Tools button allows you to display frequently used Menu and Connection items
with a Single button press.
1 Press the TOOLS button.
The TOOLS menu will appear.
2 Press the ▲/▼ button to select a menu, then press the ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.
For a more detailed description of each function, refer to the corresponding page.
Device List, see page 82
Headset Connection, see page 69
Picture Setting, see page 28
Sound Setting, see page 36
Sleep Timer, see page 50
Caption, see page 51~52
Channel Add/Delete, see page 42
Delete Favorite Channel, see page 43
Auto Program, see page 21
Air
3
Mode
:
Dynamic
Contrast : 100
Brightness : 45
Sharpness : 75
Color : 55
Tint (G/R) : G50/R50
Color Tone : Cool1
Detail Settings
Picture
Device List
Headset Connection
Picture Setting
Sound Setting
Sleep Timer Off
Caption
Off
Channel Add/Delete
Delete Favorite Channel
Move
Enter
No Time Information
BP68-00640A-00Eng.indb 20 2007-04-23 ¿ÀÈÄ 4:16:34
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276

Samsung hl-t7288 Le manuel du propriétaire

Catégorie
Téléviseurs LCD
Taper
Le manuel du propriétaire
Ce manuel convient également à